Mainframe

mainframe_install

orig url: https://pastebin.com/umhdBsPu
 
 =========  ==========    =====       ===== 
  =========  ============  ======     ====== 
     ===       ===   ====    =====   =====   
     ===       =========     ====== ======  INSTALLIN'  THAT  SWEET SWEET
     ===       ========      =============  BIG IRON ON YOUR LINUX LAPTOP
     ===       =========     =============  OR SERVER  - BY MR. SKILLFULL
     ===       ===   ====    ===  ===  ===   
  =========  ============  =====   =   ===== 
  =========  ==========    =====       ===== 

THE GOOD FOLKS OVER AT THE HERCULES MAILING LIST WILL NEVER SHARE THIS. THATS WHY IVE DECIDED TO PUT TOGETHER INSTRUCTIONS TO INSTALL ZOS ON YOUR DEBIAN MACHINE USING HERCULES. FOR THE PEOPLE. ILL TRY TO MAKE THIS AS EASY AS POSSIBLE BUT YOURE ALL NEW TO ZOS SO IT WILL TAKE SOME TIME. GET A DEBIAN OR UBUNTU SYSTEM SPUN UP BECAUSE THIS GUIDE WILL BE BEST FOLLOWED IN EITHER OF THOSE. 

STEP 1: DOWNLOAD ZOS.

	GET THE "IBM ZOS 1.10" TORRENT: magnet:?xt=urn:btih:653a0697533b42b495c18c0e06222a7b2e9af2c3

STEP 2: WHILE YOU WAIT FOR THE 16GB DOWNLOAD TO FINISH INSTALL GIT REXX C3270 AND BUILD-ESSENTIALS IN DEBIAN

	sudo apt-get install git build-essential libtool automake autoconf libregina3-dev screen c3270

STEP 3: GET HERCULES 4.00 RUNNING

	git clone https://github.com/hercules-390/hyperion.git
	cd hercules-390
	./autogen.sh
	./configure --enable-cckd-bzip2 --enable-regina-rexx
	make
	sudo make install

STEP 4: TEST YOUR HERCULES

	/usr/local/bin/hercules

	THEN IN ANOTHER TERMINAL WINDOW

	c3270 localhost:3270

	IT SHOULD LOOK LIKE THIS:

	/=======================================================================\
	|									|
	| Hercules Version  : 4.00						|
	| Host name         : MS						|
	| Host OS           : DEBIAN						|
	| Host Architecture : x86						|
	| Processors        : MP=2						|
	| LPAR Name         : HERCULES						|
	| Device number     : 0:001F						|
	| Subchannel        : 0004						|
	| 									|
	| HHH          HHH   The S/370, ESA/390 and z/Architecture		|
	| HHH          HHH                 Emulator				|
	| HHH          HHH							|
	| HHH          HHH  EEEE RRR   CCC U  U L    EEEE  SSS			|
	| HHHHHHHHHHHHHHHH  E    R  R C    U  U L    E    S			|
	| HHHHHHHHHHHHHHHH  EEE  RRR  C    U  U L    EEE   SS			|
	| HHHHHHHHHHHHHHHH  E    R R  C    U  U L    E       S			|
	| HHH          HHH  EEEE R  R  CCC  UU  LLLL EEEE SSS			|
	| HHH          HHH							|
	| HHH          HHH							|
	| HHH          HHH     My PC thinks it's a MAINFRAME			|
	| 									|
	| Copyright (c) 1999-2011 Roger Bowler, Jan Jaeger, and others		|
	|									|
	\=======================================================================/


	TO EXIT THE CONSOLE USE CTRL-] AND TYPE 'quit'

STEP 5: ONCE THE DOWNLOAD IS DONE MAKE THE FOLLOWING CHANGES:
	
	COPY THE FOLDER "ZOS 110 Copy" in "IBM ZOS 1.10/Z110SA/images/" TO YOUR HOME FOLDER AND RENAME IT TO "MAINFRAME"
	MAKE A DIRECTORY CALLED PRTR IN THE "MAINFRAME" DIRECTORY. YOU SHOULD NOW HAVE THREE FOLDERS: CONF, DASD AND PRTR
	EDIT THE FILE "MAINFRAME/CONF/ADCD_LINUX.CONF" AND MAKE THE FOLLOWING CHANGES
		LINES 38, 39 AND 40 REPLACE "/home/ehrocha/hercules/images/Z110/" WITH "/home/<your user>/MAINFRAME/"
		LINE 115 REPLACE "0E20.2   LCS  10.0.1.20" WITH "0E20.2 3088 CTCI /dev/net/tun 1500 192.168.0.210 192.168.0.211 255.255.255.255" SUBSTITUTING YOUR OWN NETWORK SUBNETS INSTEAD OF 192.168.0
		OPTIONAL: CNSLPORT DEFINES THE PORT TO BE USED YOU CAN CHANGE TO WHATEVER. THE CURRENT SETTING IS 23
	

STEP 6: LAUNCH ZOS
	
	sudo /usr/local/bin/hercules -f /home/<your user>/MAINFRAME/CONF/ADCD_LINUX.CONF
	
	IN A SEPERATE TERMINAL CONNECT WITH c3270
	
	c3270 localhost:23

	NOW BACK TO THE HERCULES WINDOW AND TYPE: 
	
	ipl a80
	
	BACK TO YOUR c3270 WINDOW AND WAIT AS THE ZOS ENVIRONMENT BOOTS. IF IT LOOKS LIKE IT STALLS OR SAYS WAITING JUST WAIT FOR A BIT AND IT WILL CONTINUE ON ITS OWN. COULD TAKE 15 MINUTES OR MORE
	ONCE ITS ALL DONE OPEN A THIRD WINDOW AND CONNECT TO 'localhost' AGAIN. THIS MIGHT LOOK LIKE THE ORIGINAL HERCULES WINDOW. IF SO JUST CLOSE THAT CONNECTION AND WAIT A BIT LONGER.
	IT SHOULD LOOK LIKE THIS
	
	/===============================================================================\
	|										|
	| Mainframe Operating System                                      z/OS V1.10	|
	|										|
	|										|
	|										|
	|										|
	|		DDD   U   U ZZZZZ  AAA						|
	|		D   D U   U    Z  A   A						|
	|		D   D U   U   Z   AAAAA						|
	|		D   D U   U  Z    A   A						|
	|		DDD    UUU  ZZZZZ A   A						|
	|										|
	|										|
	|										|
	|	Welcome to DUZA Mainframe System!					|
	|										|
	|										|
	| TSO      - Logon to TSO/ISPF        SA       - System Automation		|
	| CICS     - CICS System              TWS      - Workload Scheduler		|
	| IMS      - IMS System								|
	| 										|
	| Enter your choice==>								|
	| Enter one of above commands in red						|
	|										|
	| Your IP(               :     ), SNA LU(LCL702  )       01/17/13 03:55:47	|
	|										|
	\===============================================================================/


STEP 7: LOGGING ON

	AT THE "==>" PROMPT ENTER "TSO". YOULL BE ASKED FOR A USER ID ENTER "IBMUSER". YOULL THEN BE ASKED FOR THE PASSWORD ENTER "SYS1".
	EVENTUALLY YOULL SEE 'ispf' FOLLOWED BY '***'. HIT ENTER.
	WELCOME TO ZOS!

YOU DID IT, THATS ALL THERE IS TO IT REALLY. NOW GO LEARN HOW TO INSTALL GCCMVS OR HOW TO COMPILE C PROGRAMS IN OMVS (HINT: AT THE Command ===> PROMPT TYPE "TSO OMVS" FOR SOME UNIX GOODNESS)


**** OPTIONAL BUT RECOMMENDED ****

STEP 8: GETTING NETWORKING GOING

	FROM THE ISPF MENU SCREEN TYPE "3.4"
	REPLACE "IBMUSER" WITH "DUZA" AND HIT ENTER
	HIT PAGE DOWN AND FIND "DUZA.TCPPARMS"
	ON THAT SAME LINE THREE CHARACTERS TO THE LEFT FROM THE LETTER "D" IN "DUZA" TYPE THE LETTER "E" AND HIT ENTER
	ON THE FIRST BLANK LINE NEXT TO "PROFILE" TYPE THE LETTER "E" AND HIT ENTER	
	PAGE DOWN TO LINE 90 WHICH WILL LOOK LIKE THIS:

		000090 DEVICE LCS1   LCS           E20
		000091 LINK ETH1  ETHERNET  0  LCS1
		000092
		000093 HOME
		000094    10.0.1.20    ETH1
		000095
		000096 GATEWAY
		000097    10.0.1.100 = ETH1 1500 HOST
		000098
		000099 DEFAULTNET 10.0.1.100 ETH1 1500 0

	MAKE IT LOOK LIKE THIS:

		000090 DEVICE CTCA1 CTC e20
		000091 LINK CTC1 CTC 1 CTCA1
		000092
		000093 HOME
		000094    192.168.0.210  CTC1
		000095
		000096 GATEWAY
		000097    192.168.0.1  = CTC1 1492 HOST
		000098
		000099 DEFAULTNET 192.168.0.5 CTC1 1492 0

	*****SPECIAL NOTE***** IF YOURE NOT ON A 192.168.0.* NETWORK JUST MATCH UP THE FIRST IP ADDRESS TO BE THE ONE YOU SET IN THE .CONF FILE. THE SECOND IS YOUR ROUTER IP ADDRESS AND THE THIRD IS THE IP ADDRESS OF THE HERCULES HOST MACHINE

	WHEN DONE ON THE 'Command ===>' LINE TYPE "SAVE" AND THEN "END"
	GO BACK TO THE OTHER c3270 WINDOW AND TYPE "STOP TCPIP" AND THEN "START TCPIP"

	IN LINUX IN A NEW TERMINAL WINDOW RUN THE FOLLOWING AS ROOT:
		echo "1"  > /proc/sys/net/ipv4/conf/all/proxy_arp 
		echo "1"  > /proc/sys/net/ipv4/conf/all/forwarding 

	THEN TRY TELNETING TO YOUR MAINFRAME: telnet 192.168.0.210 1023 (USER/PASS: IBMUSER/SYS1)

STEP 9: SHUTTING IT ALL DOWN
	
	IN THE c3270 YOU OPENED FIRST TYPE "S SHUTSYS" AND AFTER A WHILE TYPE "Z EOD"
	WAIT A MINUTE OR TWO
	IN THE HERCULES WINDOWS TYPE "exit"
	TO BOOT AGAIN FOLLOW STEP 6

YOUR ALL SET NOW WELCOME TO THE WORLD OF BIG IRON.