Created
December 24, 2014 13:15
-
-
Save martinusadyh/b86ab81292568552d2bb to your computer and use it in GitHub Desktop.
Output smartctl -xH
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
martinusadyh@martinusadyh:[~]$ sudo smartctl -H /dev/sdb6 | |
[sudo] password for martinusadyh: | |
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-24-generic] (local build) | |
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
martinusadyh@martinusadyh:[~]$ sudo smartctl -x /dev/sdb6 | |
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-24-generic] (local build) | |
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Seagate Momentus 5400.6 | |
Device Model: ST9500325AS | |
Serial Number: 5VEND3AM | |
LU WWN Device Id: 5 000c50 04510ebf8 | |
Firmware Version: 0005HPM1 | |
User Capacity: 500,107,862,016 bytes [500 GB] | |
Sector Size: 512 bytes logical/physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ATA8-ACS T13/1699-D revision 4 | |
SATA Version is: SATA 2.6, 3.0 Gb/s | |
Local Time is: Wed Dec 24 20:11:01 2014 WIB | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Unknown | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x82) Offline data collection activity | |
was completed without error. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 0) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 136) minutes. | |
SCT capabilities: (0x103f) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 10 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-- 117 099 006 - 119085566 | |
3 Spin_Up_Time -O---- 099 098 000 - 0 | |
4 Start_Stop_Count PO--CK 097 097 000 - 3461 | |
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 | |
7 Seek_Error_Rate POSR-- 083 060 030 - 217989958 | |
9 Power_On_Hours -O--CK 089 089 000 - 10435 | |
10 Spin_Retry_Count PO--C- 100 100 097 - 0 | |
12 Power_Cycle_Count PO--CK 098 098 020 - 2328 | |
183 Runtime_Bad_Block -O--CK 100 253 000 - 57968 | |
184 End-to-End_Error PO--CK 100 100 097 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 0 | |
188 Command_Timeout -O--CK 100 001 000 - 58709 | |
189 High_Fly_Writes -O-RCK 100 100 000 - 0 | |
190 Airflow_Temperature_Cel -O---K 067 054 045 - 33 (Min/Max 29/33) | |
191 G-Sense_Error_Rate -O--CK 100 100 000 - 152 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 148 | |
193 Load_Cycle_Count -O--CK 094 094 000 - 12083 | |
194 Temperature_Celsius -O---K 033 046 000 - 33 (0 20 0 0 0) | |
195 Hardware_ECC_Recovered -O-RC- 052 025 000 - 119085566 | |
196 Reallocated_Event_Count PO--CK 100 100 036 - 0 | |
197 Current_Pending_Sector -O--C- 100 100 000 - 0 | |
198 Offline_Uncorrectable ----C- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -OSRCK 200 194 000 - 57019 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 GPL,SL R/O 1 Summary SMART error log | |
0x02 GPL,SL R/O 5 Comprehensive SMART error log | |
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log | |
0x06 GPL,SL R/O 1 SMART self-test log | |
0x07 GPL,SL R/O 1 Extended self-test log | |
0x09 GPL,SL R/W 1 Selective self-test log | |
0x10 GPL,SL R/O 1 NCQ Command Error log | |
0x11 GPL,SL R/O 1 SATA Phy Event Counters | |
0x21 GPL,SL R/O 1 Write stream error log | |
0x22 GPL,SL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa1 GPL,SL VS 20 Device vendor specific log | |
0xa2 GPL VS 2248 Device vendor specific log | |
0xa8 GPL,SL VS 65 Device vendor specific log | |
0xa9 GPL,SL VS 1 Device vendor specific log | |
0xb0 GPL VS 2864 Device vendor specific log | |
0xbe-0xbf GPL VS 65535 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (5 sectors) | |
Device Error Count: 7 | |
CR = Command Register | |
FEATR = Features Register | |
COUNT = Count (was: Sector Count) Register | |
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 | |
LH = LBA High (was: Cylinder High) Register ] LBA | |
LM = LBA Mid (was: Cylinder Low) Register ] Register | |
LL = LBA Low (was: Sector Number) Register ] | |
DV = Device (was: Device/Head) Register | |
DC = Device Control Register | |
ER = Error register | |
ST = Status register | |
Powered_Up_Time is measured from power on, and printed as | |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
Error 7 [6] occurred at disk power-on lifetime: 10429 hours (434 days + 13 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
04 -- 51 00 00 00 00 17 3e 5a 2e 00 00 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:04:08.760 FLUSH CACHE EXT | |
61 00 00 00 08 00 00 17 39 98 80 40 00 00:04:08.760 WRITE FPDMA QUEUED | |
60 00 00 01 00 00 00 17 3a 98 b0 40 00 00:04:08.744 READ FPDMA QUEUED | |
60 00 00 00 e0 00 00 17 3a 97 b0 40 00 00:04:08.744 READ FPDMA QUEUED | |
60 00 00 00 18 00 00 17 3a 98 98 40 00 00:04:08.743 READ FPDMA QUEUED | |
Error 6 [5] occurred at disk power-on lifetime: 10380 hours (432 days + 12 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
04 -- 71 00 04 00 00 00 80 87 81 e0 00 Device Fault; Error: ABRT | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
a1 00 00 00 00 00 00 00 00 00 00 a0 00 05:48:04.055 IDENTIFY PACKET DEVICE | |
ec 00 00 00 00 00 00 00 00 00 00 a0 00 05:48:04.055 IDENTIFY DEVICE | |
ff 00 00 00 00 00 00 00 00 00 00 00 00 05:48:03.743 [VENDOR SPECIFIC] | |
00 00 00 00 00 00 00 00 00 00 00 00 ff 05:48:03.743 NOP [Abort queued commands] | |
a1 00 00 00 00 00 00 00 00 00 00 a0 00 05:47:58.727 IDENTIFY PACKET DEVICE | |
Error 5 [4] occurred at disk power-on lifetime: 10380 hours (432 days + 12 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
04 -- 71 00 04 00 00 00 80 87 81 e0 00 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
ec 00 00 00 00 00 00 00 00 00 00 a0 00 05:48:04.055 IDENTIFY DEVICE | |
ff 00 00 00 00 00 00 00 00 00 00 00 00 05:48:03.743 [VENDOR SPECIFIC] | |
00 00 00 00 00 00 00 00 00 00 00 00 ff 05:48:03.743 NOP [Abort queued commands] | |
a1 00 00 00 00 00 00 00 00 00 00 a0 00 05:47:58.727 IDENTIFY PACKET DEVICE | |
ec 00 00 00 00 00 00 00 00 00 00 a0 00 05:47:58.726 IDENTIFY DEVICE | |
Error 4 [3] occurred at disk power-on lifetime: 10380 hours (432 days + 12 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
04 -- 71 00 04 00 00 00 80 87 81 e0 00 Device Fault; Error: ABRT | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
a1 00 00 00 00 00 00 00 00 00 00 a0 00 05:47:58.727 IDENTIFY PACKET DEVICE | |
ec 00 00 00 00 00 00 00 00 00 00 a0 00 05:47:58.726 IDENTIFY DEVICE | |
ff 00 00 00 00 00 00 00 00 00 00 00 00 05:47:58.414 [VENDOR SPECIFIC] | |
00 00 00 00 00 00 00 00 00 00 00 00 ff 05:47:58.414 NOP [Abort queued commands] | |
a1 00 00 00 00 00 00 00 00 00 00 a0 00 05:47:53.435 IDENTIFY PACKET DEVICE | |
Error 3 [2] occurred at disk power-on lifetime: 10380 hours (432 days + 12 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
04 -- 71 00 04 00 00 00 80 87 81 e0 00 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
ec 00 00 00 00 00 00 00 00 00 00 a0 00 05:47:58.726 IDENTIFY DEVICE | |
ff 00 00 00 00 00 00 00 00 00 00 00 00 05:47:58.414 [VENDOR SPECIFIC] | |
00 00 00 00 00 00 00 00 00 00 00 00 ff 05:47:58.414 NOP [Abort queued commands] | |
a1 00 00 00 00 00 00 00 00 00 00 a0 00 05:47:53.435 IDENTIFY PACKET DEVICE | |
ec 00 00 00 00 00 00 00 00 00 00 a0 00 05:47:53.398 IDENTIFY DEVICE | |
Error 2 [1] occurred at disk power-on lifetime: 10380 hours (432 days + 12 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
04 -- 71 00 04 00 00 00 80 87 81 e0 00 Device Fault; Error: ABRT | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
a1 00 00 00 00 00 00 00 00 00 00 a0 00 05:47:53.435 IDENTIFY PACKET DEVICE | |
ec 00 00 00 00 00 00 00 00 00 00 a0 00 05:47:53.398 IDENTIFY DEVICE | |
00 00 00 00 00 00 00 00 00 00 00 00 ff 05:47:53.087 NOP [Abort queued commands] | |
61 00 00 04 00 00 00 18 bf 58 00 40 00 05:47:52.980 WRITE FPDMA QUEUED | |
61 00 00 04 00 00 00 18 bf 5c 00 40 00 05:47:52.980 WRITE FPDMA QUEUED | |
Error 1 [0] occurred at disk power-on lifetime: 10380 hours (432 days + 12 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
04 -- 71 00 04 00 00 00 80 87 81 e0 00 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
ec 00 00 00 00 00 00 00 00 00 00 a0 00 05:47:53.398 IDENTIFY DEVICE | |
00 00 00 00 00 00 00 00 00 00 00 00 ff 05:47:53.087 NOP [Abort queued commands] | |
61 00 00 04 00 00 00 18 bf 58 00 40 00 05:47:52.980 WRITE FPDMA QUEUED | |
61 00 00 04 00 00 00 18 bf 5c 00 40 00 05:47:52.980 WRITE FPDMA QUEUED | |
61 00 00 04 00 00 00 18 bf 60 00 40 00 05:47:52.979 WRITE FPDMA QUEUED | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 10428 - | |
# 2 Short offline Aborted by host 60% 10428 - | |
# 3 Extended offline Completed without error 00% 10393 - | |
# 4 Short offline Completed without error 00% 10391 - | |
# 5 Short offline Completed without error 00% 10389 - | |
# 6 Short offline Aborted by host 90% 10183 - | |
# 7 Short offline Aborted by host 90% 9725 - | |
# 8 Extended offline Aborted by host 90% 3 - | |
# 9 Short offline Completed without error 00% 3 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 522 (0x020a) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 33 Celsius | |
Power Cycle Min/Max Temperature: 29/33 Celsius | |
Lifetime Min/Max Temperature: 20/46 Celsius | |
Under/Over Temperature Limit Count: 0/12 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/ 0 Celsius | |
Min/Max Temperature Limit: 0/ 0 Celsius | |
Temperature History Size (Index): 128 (105) | |
Index Estimated Time Temperature Celsius | |
106 2014-12-24 18:04 35 **************** | |
... ..(113 skipped). .. **************** | |
92 2014-12-24 19:58 35 **************** | |
93 2014-12-24 19:59 ? - | |
94 2014-12-24 20:00 29 ********** | |
95 2014-12-24 20:01 29 ********** | |
96 2014-12-24 20:02 30 *********** | |
97 2014-12-24 20:03 31 ************ | |
98 2014-12-24 20:04 31 ************ | |
99 2014-12-24 20:05 31 ************ | |
100 2014-12-24 20:06 32 ************* | |
101 2014-12-24 20:07 32 ************* | |
102 2014-12-24 20:08 32 ************* | |
103 2014-12-24 20:09 33 ************** | |
104 2014-12-24 20:10 33 ************** | |
105 2014-12-24 20:11 33 ************** | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
Device Statistics (GP Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET | |
0x0001 2 0 Command failed due to ICRC error | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 1 R_ERR response for host-to-device non-data FIS | |
martinusadyh@martinusadyh:[~]$ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment