/var/log/dmesg

dmesg.log

[    1.827785] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.828450]  sda: sda1 sda2 < sda5 sda6 >
[    1.828991] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.831718] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.831719] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.831864] hub 1-1:1.0: USB hub found
[    1.831967] hub 1-1:1.0: 6 ports detected
[    1.943693] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.076051] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.076053] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.076438] hub 2-1:1.0: USB hub found
[    2.076503] hub 2-1:1.0: 6 ports detected
[    2.139768] tsc: Refined TSC clocksource calibration: 2494.334 MHz
[    2.147802] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.147877] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    2.148903] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.158129] ata2.00: ATA-8: ST9500325AS, 0005HPM1, max UDMA/100
[    2.158133] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.172099] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.181552] ata2.00: configured for UDMA/100
[    2.181866] scsi 1:0:0:0: Direct-Access     ATA      ST9500325AS      0005 PQ: 0 ANSI: 5
[    2.182018] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.182029] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.182099] sd 1:0:0:0: [sdb] Write Protect is off
[    2.182101] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.182133] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.241470] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c
[    2.241471] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.241472] usb 1-1.1: SerialNumber: 00b05462618a
[    2.268025] Console: switching to colour frame buffer device 170x48
[    2.270048] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.270049] i915 0000:00:02.0: registered panic notifier
[    2.276806] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.278737] acpi device:04: registered as cooling_device4
[    2.278808] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12
[    2.278890] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.312110] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
[    2.338772]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 >
[    2.339746] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.384524] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400, board id: 1398, fw id: 781874
[    2.407905] usb 1-1.3: New USB device found, idVendor=2635, idProduct=0601
[    2.407908] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.407909] usb 1-1.3: Product:  2.4G RF MOUSE
[    2.411070] hidraw: raw HID events driver (C) Jiri Kosina
[    2.414959] usbcore: registered new interface driver usbhid
[    2.414961] usbhid: USB HID core driver
[    2.416183] input:  2.4G RF MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[    2.416282] hid-generic 0003:2635:0601.0001: input,hidraw0: USB HID v1.11 Mouse [ 2.4G RF MOUSE] on usb-0000:00:1a.0-1.3/input0
[    2.428499] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[    2.480521] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
[    2.622719] usb 2-1.4: New USB device found, idVendor=04f2, idProduct=b230
[    2.622722] usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.622724] usb 2-1.4: Product: HP HD Webcam [Fixed]
[    2.622726] usb 2-1.4: Manufacturer: Chicony Electronics Co., Ltd.
[    2.622727] usb 2-1.4: SerialNumber: SN0001
[    2.698261] ata2.00: exception Emask 0x10 SAct 0x7f SErr 0x800000 action 0x6 frozen
[    2.698271] ata2.00: irq_stat 0x08000000, interface fatal error
[    2.698277] ata2: SError: { LinkSeq }
[    2.698284] ata2.00: failed command: READ FPDMA QUEUED
[    2.698296] ata2.00: cmd 60/08:00:80:37:26/00:00:3a:00:00/40 tag 0 ncq 4096 in
[    2.698296]          res 40/00:20:80:8f:39/00:00:17:00:00/40 Emask 0x10 (ATA bus error)
[    2.698302] ata2.00: status: { DRDY }
[    2.698307] ata2.00: failed command: READ FPDMA QUEUED
[    2.698318] ata2.00: cmd 60/08:08:80:ff:81/00:00:2e:00:00/40 tag 1 ncq 4096 in
[    2.698318]          res 40/00:20:80:8f:39/00:00:17:00:00/40 Emask 0x10 (ATA bus error)
[    2.698323] ata2.00: status: { DRDY }
[    2.698327] ata2.00: failed command: READ FPDMA QUEUED
[    2.698337] ata2.00: cmd 60/02:10:fe:37:50/00:00:09:00:00/40 tag 2 ncq 1024 in
[    2.698337]          res 40/00:20:80:8f:39/00:00:17:00:00/40 Emask 0x10 (ATA bus error)
[    2.698343] ata2.00: status: { DRDY }
[    2.698347] ata2.00: failed command: READ FPDMA QUEUED
[    2.698361] ata2.00: cmd 60/08:18:80:2f:50/00:00:09:00:00/40 tag 3 ncq 4096 in
[    2.698361]          res 40/00:20:80:8f:39/00:00:17:00:00/40 Emask 0x10 (ATA bus error)
[    2.698362] ata2.00: status: { DRDY }
[    2.698363] ata2.00: failed command: READ FPDMA QUEUED
[    2.698366] ata2.00: cmd 60/08:20:80:8f:39/00:00:17:00:00/40 tag 4 ncq 4096 in
[    2.698366]          res 40/00:20:80:8f:39/00:00:17:00:00/40 Emask 0x10 (ATA bus error)
[    2.698367] ata2.00: status: { DRDY }
[    2.698369] ata2.00: failed command: READ FPDMA QUEUED
[    2.698371] ata2.00: cmd 60/08:28:80:57:38/00:00:3a:00:00/40 tag 5 ncq 4096 in
[    2.698371]          res 40/00:20:80:8f:39/00:00:17:00:00/40 Emask 0x10 (ATA bus error)
[    2.698373] ata2.00: status: { DRDY }
[    2.698374] ata2.00: failed command: READ FPDMA QUEUED
[    2.698377] ata2.00: cmd 60/08:30:80:c7:dd/00:00:22:00:00/40 tag 6 ncq 4096 in
[    2.698377]          res 40/00:20:80:8f:39/00:00:17:00:00/40 Emask 0x10 (ATA bus error)
[    2.698378] ata2.00: status: { DRDY }
[    2.698381] ata2: hard resetting link
[    2.836972] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    3.016809] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.018560] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.043003] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.052625] ata2.00: configured for UDMA/100
[    3.052681] ata2: EH complete
[    3.141137] Switched to clocksource tsc
[    3.918499] random: nonblocking pool is initialized
[    5.192611] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.310690] Adding 248828k swap on /dev/sda6.  Priority:-1 extents:1 across:248828k SSFS
[    7.666769] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.978357] systemd-udevd[399]: starting version 204
[    8.027845] lp: driver loaded but no devices found
[    8.039025] mei_me 0000:00:16.0: irq 54 for MSI/MSI-X
[    8.044573] ppdev: user-space parallel port driver
[    8.048809] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[    8.048817] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.048820] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    8.048824] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.048826] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    8.048830] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.048832] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    8.048836] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.048837] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.059910] hp_accel: laptop model unknown, using default axes configuration
[    8.060474] lis3lv02d: 8 bits 3DC sensor found
[    8.099344] cfg80211: Calling CRDA to update world regulatory domain
[    8.118611] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14
[    8.138025] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
[    8.148951] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[    8.163858] mute LED gpio 1 polarity 0
[    8.164068] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    8.164070]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.164072]    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    8.164073]    mono: mono_out=0x0
[    8.164073]    inputs:
[    8.164075]      Internal Mic=0x11
[    8.164076]      Mic=0xc
[    8.164719] hda_codec: too deep connection for 0x11
[    8.180959] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    8.181125] rtlwifi: wireless switch is on
[    8.195274] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    8.195379] EXT4-fs (sda1): Mount option "nouser_xattr" will be removed by 3.5
[    8.195379] Contact linux-ext4@vger.kernel.org if you think we should keep it.
[    8.195379] 
[    8.195383] EXT4-fs (sda1): Ignoring removed nobh option
[    8.195400] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    8.195504] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    8.250065] EXT4-fs (sda1): re-mounted. Opts: discard,barrier=0,nouser_xattr,nobh,commit=100,errors=remount-ro
[    8.280773] device-mapper: multipath: version 1.6.0 loaded
[    8.383002] input: HP WMI hotkeys as /devices/virtual/input/input18
[    8.427892] cfg80211: World regulatory domain updated:
[    8.427896] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.427899] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.427901] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.427903] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.427905] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.427907] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.454789] EXT4-fs (sda5): Mount option "nouser_xattr" will be removed by 3.5
[    8.454789] Contact linux-ext4@vger.kernel.org if you think we should keep it.