periph.io beaglebone green

gistfile1.txt

$ go install ./periph-info ./headers-list && headers-list && periph-info
I2C: 4 pins
  Pos  Name       Func
  1    GROUND     
  2    V3_3       
  3    GPIO12     In/Low
  4    GPIO13     In/Low

J1: 6 pins
  Pos  Name       Func
  1    GROUND     
  2    INVALID    
  3    INVALID    
  4    GPIO42     In/Low
  5    GPIO43     In/Low
  6    INVALID    

P8: 46 pins
     Func       Name  Pos  Pos  Name      Func
              GROUND    1  2    GROUND    
   In/Low     GPIO38    3  4    GPIO39    In/Low
   In/Low     GPIO34    5  6    GPIO35    In/Low
   In/Low     GPIO66    7  8    GPIO67    In/Low
   In/Low     GPIO69    9  10   GPIO68    In/Low
   In/Low     GPIO45   11  12   GPIO44    In/Low
   In/Low     GPIO23   13  14   GPIO26    ERR
   In/Low     GPIO47   15  16   GPIO46    In/Low
   In/Low     GPIO27   17  18   GPIO65    In/Low
   In/Low     GPIO22   19  20   GPIO63    In/Low
   In/Low     GPIO62   21  22   GPIO37    In/Low
   In/Low     GPIO36   23  24   GPIO33    In/Low
   In/Low     GPIO32   25  26   GPIO61    ERR
   In/Low     GPIO86   27  28   GPIO88    In/Low
   In/Low     GPIO87   29  30   GPIO89    In/Low
   In/Low     GPIO10   31  32   GPIO11    In/Low
   In/Low      GPIO9   33  34   GPIO81    In/Low
   In/Low      GPIO8   35  36   GPIO80    In/Low
   In/Low     GPIO78   37  38   GPIO79    In/Low
   In/Low     GPIO76   39  40   GPIO77    In/Low
   In/Low     GPIO74   41  42   GPIO75    In/Low
   In/Low     GPIO72   43  44   GPIO73    In/Low
   In/Low     GPIO70   45  46   GPIO71    In/Low

P9: 46 pins
     Func       Name  Pos  Pos  Name      Func
              GROUND    1  2    GROUND    
                V3_3    3  4    V3_3      
                  V5    5  6    V5        
                  V5    7  8    V5        
             PWR_BUT    9  10   RESET_OUT 
   In/Low     GPIO30   11  12   GPIO60    ERR
   In/Low     GPIO31   13  14   GPIO50    In/Low
   In/Low     GPIO48   15  16   GPIO51    In/Low
   In/Low      GPIO5   17  18   GPIO4     In/Low
   In/Low     GPIO13   19  20   GPIO12    In/Low
   In/Low      GPIO3   21  22   GPIO2     In/Low
   In/Low     GPIO49   23  24   GPIO15    In/Low
   In/Low    GPIO117   25  26   GPIO14    In/Low
   In/Low    GPIO115   27  28   GPIO113   In/High
   In/Low    GPIO111   29  30   GPIO112   ERR
   In/Low    GPIO110   31  32   VADC      
                AIN4   33  34   AGND      
                AIN6   35  36   AIN5      
                AIN2   37  38   AIN3      
                AIN0   39  40   AIN1      
  In/High     GPIO20   41  42   GPIO7     In/Low
              GROUND   43  44   GROUND    
              GROUND   45  46   GROUND    

UART: 4 pins
  Pos  Name       Func
  1    GROUND     
  2    V3_3       
  3    GPIO3      In/Low
  4    GPIO2      In/Low
Drivers loaded and their dependencies, if any:
- am335x
- beaglebone      : [am335x]
- beaglebone-green: [am335x]
- sysfs-gpio
- sysfs-i2c
- sysfs-led
- sysfs-spi
Drivers skipped and the reason why:
- allwinner-gpio-pl: dependency not loaded: "allwinner-gpio"
- allwinner-gpio   : Allwinner CPU not detected
- bcm283x-dma      : dependency not loaded: "bcm283x-gpio"
- bcm283x-gpio     : bcm283x CPU not detected
- chip             : dependency not loaded: "allwinner-gpio"
- odroid-c1        : Hardkernel ODROID-C0/C1/C1+ board not detected
- pine64           : dependency not loaded: "allwinner-gpio-pl"
- rpi              : dependency not loaded: "bcm283x-gpio"
- sysfs-thermal    : sysfs-thermal: no sensor found
Drivers failed to load and the error:
  <none>