RTD1295_Zidoo_X9S_boot_log

C1:80000000
C2
?
C3hswitch frequency to 0x00000046
frequency divider is 0x00000080
switch frequency to 0x00000046
frequency divider is 0x00000004
switch to SDR 8 bit
switch bus width to 0x00000008 bits success

hwsetting size: 000005E0
C4
f 
5-5
Goto FSBL: 0x10100000
<=============================================>
fsbl_main: sys_secure_type = 0x0000BEEE
fsbl_main: sys_boot_type = 0x00000002
fsbl_main: sys_boot_enc = 0x00000000
fsbl_main: sys_bisr_done = 0x00000000
sys_hwsetting_size:00000600
sys_bootcode_size:000B21C0
sys_secure_fsbl_size:00010B80
sys_secure_os_size:00067B00
sys_bl31_size:00005040
sys_rsa_key_fw_size:00000000
sys_rsa_key_tee_size:00000000
sys_rescue_size:00000000

HwSetting:
hwsetting_blk_no:00000100
hwsetting_total_size:00000680
hwsetting_blk_count:00000004

Bootcode:
bootcode_blk_no:00000104
bootcode_total_size:000B21E0
bootcode_blk_count:00000591

FSBL:
secure_fsbl_blk_no:00000695
secure_fsbl_total_size:00010BA0
secure_fsbl_blk_count:00000086

TEE OS:
secure_os_blk_no:0000071B
secure_os_total_size:00067B20
secure_os_blk_count:0000033E

BL31:
bl31_blk_no:00000A59
bl31_total_size:00005060
bl31_blk_count:00000029

RSA Key Fw:
rsa_key_fw_blk_no:00000A82
rsa_key_fw_total_size:00000000
rsa_key_fw_blk_count:00000000

RSA Key TEE:
rsa_key_tee_blk_no:00000A82
rsa_key_tee_total_size:00000000
rsa_key_tee_blk_count:00000000

Rescue:
rescue_blk_no:00000A82
rescue_total_size:00000000
rescue_blk_count:00000000
********** FW_TYPE_GOLD_TEE **********
fwInfo->fwType: 00000023
fwInfo->isGolden: 00000001
fwInfo->ddrReadAddr: 00520000
fwInfo->ddrDestAddr: 10200000
fwInfo->flashType: 00000002
fwInfo->flashUnitSize: 00000200
fwInfo->flashOffset: 000E3600
fwInfo->dataSize: 00067B20
body_size:00067B00
flash_unit_no:0000071B
flash_unit_count:0000033E
real_size:00067AEC
sha256 Fw 
********** FW_TYPE_GOLD_BL31 **********
fwInfo->fwType: 00000028
fwInfo->isGolden: 00000001
fwInfo->ddrReadAddr: 00520000
fwInfo->ddrDestAddr: 10120000
fwInfo->flashType: 00000002
fwInfo->flashUnitSize: 00000200
fwInfo->flashOffset: 0014B200
fwInfo->dataSize: 00005060
body_size:00005040
flash_unit_no:00000A59
flash_unit_count:00000029
real_size:00005018
sha256 Fw 
********** FW_TYPE_BOOTCODE **********
fwInfo->fwType: 00000001
fwInfo->isGolden: 00000001
fwInfo->ddrReadAddr: 00520000
fwInfo->ddrDestAddr: 00020000
fwInfo->flashType: 00000002
fwInfo->flashUnitSize: 00000200
fwInfo->flashOffset: 00020800
fwInfo->dataSize: 000B21E0
body_size:000B21C0
flash_unit_no:00000104
flash_unit_count:00000591
real_size:000B2180
sha256 Fw 
j bootcode jump address:00020000
64b


U-Boot 2012.07 (Aug 13 2016 - 10:06:21)

CPU  : Cortex-A53 quad core - AARCH32
Board: Realtek QA Board
DRAM:  0 Bytes
Watchdog: Disabled
Cache: Enabled
Non-Cache Region: 1 MB@0x07900000
MMC:   rtk_emmc : Detect chip rev. >= B
RTD1295 eMMC: 0
rtk_emmc : Detect chip rev. >= B
mmc->version=0x00010000
version=0x00000004
[LY] cardtype=57, mmc->card_caps=0f
[LY] freq = 00464388, clk diver = 00000080
[LY] speed up emmc at HS-200 
[LY] HS-200 bus width=2
[LY] mmc->boot_caps = 20b
TEMP TX_WINDOW=0x7fffffdf, TX_best=0x12 
RX_WINDOW=0xc3ffffff, RX_best=0xb 
TX1_WINDOW=0x7fffff80, TX_best=0x12 
[LY] hs200 : 0
[HC] WPG_SIZE = 8388608
Device: RTD1295 eMMC
Manufacturer ID: 15
OEM: 100
Name: AWPD3 
Tran Speed: 5f5e100
Rd Block Len: 512
MMC version 4.0
High Capacity: No
Capacity: 14.6 GiB
Bus Width: 8-bit
Speed: HS200
Factory: MMC
Factory: pp:1, seq#:0xa, size:0x25a00
------------tmp/factory/000BootParam.h found
[logo]src w/h=1280/720 dst w/h=3840/2160
In:    serial
Out:   serial
Err:   serial
Net:   Realtek PCIe GBE Family Controller mcfg = 0024
dev->name=r8168#0
Hit Esc or Tab key to enter console mode or rescue linux:  0 
------------can't find tmp/factory/recovery
======== Checking into android recovery ====

Start Boot Setup ... 
---------------LOAD  NORMAL FW  TABLE ---------------
[INFO] fw desc table base: 0x00620000, count: 22
Normal boot fw follow...
Kernel:
         FW Image to 0x03000000, size=0x00f3d000 (0x03f3d000)
         FW Image fr 0x02b30400 
DT:
         FW Image to 0x01f00000, size=0x0000f448 (0x01f0f448)
         FW Image fr 0x027b0200 
Audio FW:
         FW Image to 0x01b00000, size=0x003401a8 (0x01e401a8)
         FW Image fr 0x027f0200 
IMAGE FILE:
         FW Image to 0x1e800000, size=0x00384000 (0x1eb84000)
         FW Image fr 0x361002000 
Start A/V Firmware ...
kylin_bring up hwsetting
Finish kylin_bring_temp hwsetting
[+][AO][aio_HWEnable]
[AO]aio_CRTOn:
SYS_CLOCK_ENABLE1 [ 0x9800000c]: 0x13dec561
SYS_CLOCK_ENABLE2 [ 0x98000010]: 0x58ffe416
SYS_SOFT_RESET1 [ 0x98000000]: 0xb7da1001
SYS_SOFT_RESET4 [ 0x98000050]: 0x0000801f
[AO]ao_SetDACAnalogOn:
TVE_VDAC_CTR1 [ 0x980183a0]: 0xa86c0280
xIO_O_ACANA_GCTL1 [ 0x9800660EX4]P:OR T0x E24NV95 A1T5 040
 1A0I0O0_0I0_0A0CA
64rt_AkD_pC_rGelCToLa2d_ [bo 0otxi98m0ag0e6s6 1:0 ]:l oa0dx 88U0-aB3oao0t0 
 0A IfOr_oIm_ A0DxC0_0T02C8ON12 [5  0tox9 80x0006156f0c00]0: 00 xw2it2h1 fs0i0z0e0
T xAI0O01_I0_00A0DC0_
 CON [ 0x980066fc]: 0x221fff00
[-][AO][aio_HWEnable]
[ACPU] Set protect, start: 0x00000000 end: 0x00001000 moduleid:6
HDMI Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP 

SPDIF Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP 

Force 2ch Format: DTS DTSHD AC3 DDP MLP AAC WMAPRO 


@@@@@@@One Step TV System magic number = 0x5fff0aff, addr = 0xa001f800@@@@@@@
[AUDIO WARNING] ERR UNCACHEABLE_VADDR  0xb8071200 @  0x81b2e590

@@@@One Step magic number not match! use fw default TV System!
[@@VIDEO_RPC_VOUT_ToAgent_ConfigTVSystem_0_svc]type 0!
HDMIOff = 0
[VO]vo->is_hdmi_off_clock_on:86248
[@@VIDEO_RPC_VOUT_ToAgent_ConfigVideoStandard_0_svc]
[VO_SetVideoStandard]st 25 p 1 1 0
lVO_SetVideoStandard]ped 1 data0  0x00000004 data1c o p0yx_020n0d0_0b0o0o0t
0o[VaOd_eSre_taVnidd_erouSnt a:n dsarrdc]:H0DxM0I1o5f0f0 000 0i,s _dtsvte:_0oxn0 010 2u1s0er0_0c,v bssi_zoef:f0 x00
o0lbv1d0s0.0f
1rJmuamtp i0n gp ortto_ s2entdt ibnogo t l0oxa0d0e0r0.0.3.8
  lvds_wb 0
[VO setTVStandard 25 3D 0 0]

(TVE) TVE_DAC_mode 0,cmd->enProg 1!!
TV_NTSC_J
~~comp 0, ch2 1, mode_3D 0!!
~~comp 0, ch2 1, mode_3D 0!!
~~TVE standard#
SetVideoStandard return!
[@@VIDEO_RPC_VOUT_ToAgent_ConfigHdmiInfoFrame_0_svc]

(VO_ConfigHDMI_InfoFrame) L:236, is_hdmi_plugin 1, hdmiMode 1!!Mode 1 dataByte1  0x00000040  0x000000a8  0x00000000
dataByte4  0x00000000  0x00000000 int0  0x00000001

(HDMI_3D) mode 1, HDMI_gen 1, En_3D 0, Format_3D 0 scramble:0!!@@@@DeepColor:0 deep Depth:0 

 go back SET_HDMI!!boot_info  0xa001f600 magic  0x2452544b en 1
boot_info.w 1280 h 720
boot_addr  0x1e800000
w 1280, h 720, img0  0x1e800000, pitch0 5120
disp.x 0 y 0 w 1920 h 1080
PowerOnOSD~~
[AO][_AO_if_video_HDMI_mode]gpAudio->HDMI_output_en = 0


U-Boot 2015.07-ge1162f1 (Aug 02 2016 - 11:24:56 +0800)

CPU  : Cortex-A53 Quad Core
Board: Realtek QA Board
[ERR] get_accessible_ddr_size: hw setting error. (impossible value 0x0)
[ERR] Fall back to using CONFIG_SYS_RAM_DCU1_SIZE
DRAM:  1 GiB
mapping memory 0x20000000-0x40000000 non-cached
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0 
rtk_plat_set_fw not port yet, use default configs
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   reserving fdt memory region: addr=0 size=30000
   reserving fdt memory region: addr=1f000 size=1000
   reserving fdt memory region: addr=30000 size=d0000
   reserving fdt memory region: addr=2c00000 size=b800000
   reserving fdt memory region: addr=1b00000 size=4be000
   reserving fdt memory region: addr=2600000 size=600000
   reserving fdt memory region: addr=1ffe000 size=4000
   reserving fdt memory region: addr=11000000 size=9200000
   reserving fdt memory region: addr=10000000 size=14000
   reserving fdt memory region: addr=2200000 size=400000
   Using Device Tree in place at 0000000001f00000, end 0000000001f12447
Bring UP slave CPUs
Jump to BL31 entrypoint
VERBOSE: bl31_setup
NOTICE:  BL31: v1.2(debug):415dc83
NOTICE:  BL31: Built : 11:30:42, Jun 30 2016
INFO:    BL31: Initializing runtime services
INFO:    Start to init service std_svc 
INFO:    Finish to init service std_svc 
INFO:    Start to init service opteed_fast 
INFO:    Finish to init service opteed_fast 
INFO:    BL31: Initializing BL32
ERROR:   Core_0 TEESMC_OPTEED_RETURN_ENTRY_DONE 
ERROR:   Core_0 got optee_vectors (0x1020093c)
INFO:    BL31: Initialized BL32
INFO:    EXIT BL31
INFO:    bl31_to_kernel: kernel_resume_entry = 0x1e000
INFO:    bl31 jumps to EL2 entry 
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.17-g271f84c-dirty (root@ZidooServer) (gcc version 4.9.4 (OpenWrt/Linaro GCC 4.9-2015.06 r47277) ) #48 SMP PREEMPT Sat Mar 4 17:53:17 CST 2017 (commit id:9ea2ce0821249602888e829a5634e6aabc5ce717)
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] alternatives: enabling workaround for ARM erratum 845719
[    0.000000] earlycon: Early serial console at MMIO32 0x98007800 (options '')
[    0.000000] bootconsole [uart0] enabled
WARNING: NO PSCI SERVICE: 0x84000000 
WARNING: NO PSCI SERVICE: 0x84000006 
WARNING: NO PSCI SERVICE: 0x8400000a 
WARNING: NO PSCI SERVICE: 0x8400000a 
[    0.000000] WARNING: x1-x3 nonzero in violation of boot protocol:
[    0.000000]  x1: 0000000001f00000
[    0.000000]  x2: 00000000000003c9
[    0.000000]  x3: 0000000000000005
[    0.000000] This indicates a broken bootloader or old kernel
VVVEEERRRBBBOOOSSSEEE:::   bbblll333111___ssseeetttuuuppp


NNNOOOTTTIIICCCEEE:::      BBBLLL333111:::   vvv111...222(((dddeeebbbuuuggg))):::444111555dddccc888333


NNNOOOTTTIIICCCEEE:::      BBBLLL333111:::   BBBuuuiiilllttt   :::   111111:::333000:::444222,,,   JJJuuunnn   333000   222000111666


IIINNNFFFOOO:::            BBBLLL333111:::   IIInnniiitttiiiaaallliiizzziiinnnggg   rrruuunnntttiiimmmeee   ssseeerrrvvviiiccceeesss


IIINNNFFFOOO:::            SSStttaaarrrttt   tttooo   iiinnniiittt   ssseeerrrvvviiiccceee   ssstttddd___sssvvvccc   


IIINNNFFFOOO:::            FFFiiinnniiissshhh   tttooo   iiinnniiittt   ssseeerrrvvviiiccceee   ssstttddd___sssvvvccc   


IIINNNFFFOOO:::            SSStttaaarrrttt   tttooo   iiinnniiittt   ssseeerrrvvviiiccceee   ooopppttteeeeeeddd___fffaaasssttt   


IIINNNFFFOOO:::            FFFiiinnniiissshhh   tttooo   iiinnniiittt   ssseeerrrvvviiiccceee   ooopppttteeeeeeddd___fffaaasssttt   


IIINNNFFFOOO:::            BBBLLL333111:::   IIInnniiitttiiiaaallliiizzziiinnnggg   BBBLLL333222


EEERRRRRROOORRR:::         CCCooorrreee___213   TTTEEEEEESSSMMMCCC___OOOPPPTTTEEEEEEDDD___RRREEETTTUUURRRNNN___EEENNNTTTRRRYYY___DDDOOONNNEEE   


IIINNNFFFOOO:::            BBBLLL333111:::   IIInnniiitttiiiaaallliiizzzeeeddd   BBBLLL333222


IIINNNFFFOOO:::            EEEXXXIIITTT   BBBLLL333111


IIINNNFFFOOO:::            bbblll333111___tttooo___kkkeeerrrnnneeelll:::   kkkeeerrrnnneeelll___rrreeesssuuummmeee___eeennntttrrryyy   ===   000xxx111eee000000000


IIINNNFFFOOO:::            bbblll333111   jjjuuummmpppsss   tttooo   EEELLL222   eeennntttrrryyy   


[    0.690238] ****** rtk_lockapi_init 597, chip: id=0x00000000, revision=0x00010000
TVE_setDAC 2474,  0xd48bd400
[    2.803775] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_u2host status is okay
[    2.813701] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ehci status is okay
[    2.822526] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ohci status is okay
[    3.513173] [RTD129x PCIE Slot1] 9804e000.pcie: PCIE device has link down in slot 1
[    3.521801] [RTD129x PCIE Slot1] 9804e000.pcie: rtk_pcie_hw_initial fail
[    3.763152] [RTD129x PCIE Slot2] 9803b000.pcie2: PCIE device has link down in slot 2
[    3.771876] [RTD129x PCIE Slot2] 9803b000.pcie2: rtk_pcie2_hw_initial fail

[ROS: openRPC() intr_scpu_dev_r buf  0x00e2ffa1 s  0x00e2ffa1 e  0x00e4ffa1 i  0x00e2ffa1
[ROS: openStubRPC() intr_w buf  0x00e6ffa1 s  0x00e6ffa1 e  0x00e8ffa1 i  0x00e6ffa1[AVCPU] Set Debug level flag  0x81df350c *flag  0x01de4a58 ucache  0xa1de4a58 
[AVCPU] Set Debug level *ptrDebugFlag  0x00000001 
-------------------
Audio Version = 1007994 (Kylin)
Common Version = 0
Binary src compiled at Jan 12 2017 19:08:58
Note = 
-------------------




[A] gloabl malloc size  0x003ffeb8 
[    3.842674] AudioIntrRead:143 can't find process for handling AudioIntrRead programID:98
[    3.851908] AudioIntrRead: program:98 version:0 procedure:1 taskID:0 sysTID:4294967295 sysPID:4294967295 size:4 context:81df2cdd atomic
[    4.086367] rtk-ohci 98013400.ohci: _ohci_readl [USB Workaround] fixed force to enable ohci clock 
[    4.098614] rtc_rtd1295 9801b600.rtc: rtk_rtc already enabled 
[    4.109487] cec_core_init, register cec_bus ffffffc001146f18
[    4.115666] register cec driver 'cec' (ffffffc001147098)
[    4.121160] register cec device 'cec0' (ffffffc001147188) to cec0
[    4.127512] [cec_bus_match name = cec0,len=4,drv_name=cec]
[    4.133187] probe : cec_dev 'cec0' (ffffffc001147188), cec_drv 'cec' (ffffffc001147098)
[    4.142170] register cec device 'cec1' (ffffffc001147438) to cec0
[    4.148576] [cec_bus_match name = cec1,len=4,drv_name=cec]
[    4.158839] probe : cec_dev 'cec1' (ffffffc001147438), cec_drv 'cec' (ffffffc001147098)
[    4.253113] SDIO 2.0 A01 version
[    4.273010] [SDIO] rtk_sdhci_set_clock end real_div=100, div=80, c3c=0, PLL=564388, CLK=8007
[    4.293168] EMMC : emmc of_node found
[    4.296979] [rtkemmc_probe] get driving s0 : 0x1
[    4.301706] [rtkemmc_probe] get driving s0 : 0x77
[    4.306531] [rtkemmc_probe] get driving s0 : 0x77
[    4.311347] [rtkemmc_probe] get driving s0 : 0x77
[    4.316170] [rtkemmc_probe] get driving s0 : 0x33
[    4.320987] [rtkemmc_probe] get driving s2 : 0x1
[    4.323013] [SDIO] rtk_sdhci_set_clock end real_div=100, div=80, c3c=0, PLL=564388, CLK=8007
[    4.334363] [rtkemmc_probe] get driving s2 : 0xbb
[    4.339178] [rtkemmc_probe] get driving s2 : 0xbb
[    4.344001] [rtkemmc_probe] get driving s2 : 0xbb
[    4.348816] [rtkemmc_probe] get driving s2 : 0x33
[    4.353639] [rtkemmc_probe] get tx tuning switch : 0
[    4.358721] [rtkemmc_probe] get rx tuning switch : 0
[    4.421097] thermal thermal_zone0: binding zone rtk_thermal with cdev thermal-cpufreq-0 failed:-22
[    4.430443] -->rfkill_bluetooth_init
[    4.434193] -->rfkill_bluetooth_probe
[    4.438061] bluetooth_set_power: block=1
[    4.439721] card->mmc_avail_type = 0x00000017 
[    4.446691] <--rfkill_bluetooth_probe
[    4.576967] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    4.743079] usb usb1-port1: port 1, status 0501, change 0000, 480 Mb/s
[    4.773058] usb usb3-port1: port 1, status 0101, change 0000, 12 Mb/s
[    4.863038] usb 1-1: new high-speed USB device number 2 using rtk-ehci (platform)
[    4.923919] CL_DEV::ST 0 -> 0
[    5.013028] usb 3-1: new high-speed USB device number 2 using xhci-hcd (98029000.dwc3_u2host)
Wed Oct  4 14:22:27 UTC 2017 Starting OpenWRT init
[    5.162183] usb 1-1: bInterfaceClass = 9 
[    5.213807] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: Connection change OK: IN host mode to attach device at cc1
[    5.333659] usb 3-1: bInterfaceClass = 224 
[    5.337953] usb 3-1: bInterfaceClass = 224 
[    5.342237] usb 3-1: bInterfaceClass = 255 
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    7.682262] block: unable to load configuration (fstab: Entry not found)
[    7.689197] block: no usable configuration
ext4 etc mounted!
mount: /dev: filesystem mounted, but mount(8) failed: No such file or directory
Wed Oct  4 14:22:30 UTC 2017 Waiting 28 x 0.1 seconds for OpenWRT coldplug
Wed Oct  4 14:22:30 UTC 2017 Starting Android init
[    8.769201] init: FIXME: selinux is forced to permissive mode!!
[    8.832851] init: /init.kylin.rc: 479: invalid option 'disable'
[    8.840121] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[    9.224527] init: Failed to read from /dev/hw_random: No such device
[    9.231125] init: could not open /dev/keychord: No such file or directory
[    9.259078] init: Failed to read from /dev/hw_random: No such device
[    9.484693] init: property_set("ro.expect.recovery_id", "0x81bd2fc25a802c54a7a959e9799a5c4f6a7d8a8b000000000000000000000000") failed
[    9.496987] init: property_set("ro.expect.recovery_id", "0x10c49d50b35d863bf48e9e298a7c0ef29d808646000000000000000000000000") failed
[    9.509256] init: property_set("ro.expect.recovery_id", "0xbd6e7e359e1f06be25d4c5776d61ae038f8d2a07000000000000000000000000") failed
[    9.521853] init: /recovery not specified in fstab
[    9.834213] bluetooth_set_power: block=1
[    9.842689] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    9.851030] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    9.865023] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[    9.873538] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[    9.882855] init: cannot find [A'V/CPUs]y stSeet Dm/ebbug ilne/viel flnsatg  al0xl8-1redcee7eo4 ve*fryl.agsh ' ,0x d01i2s0fa9be8 ulicnacgh e' vel0axsa12h_0f9ree8c o
  [rAy'VC
PU] Set Debug level *ptrDebugFlag  0x00000000 
[    9.904800] init: cannot find '/system/bin/jpuinit', disabling 'jpuinit'
[    9.925624] devfreq 98050000.gpu: Couldn't update frequency transition information.
root@kylin32:/ # [   10.483098] Do not detect the SDIO card and close the clock
[   10.488853] rtk_sdmmc_get_cd: SD card does not exist, regCARD_EXIST = 0
[   10.671063] [MCP] Warning, wait clear bit deassert timeout,  force unset clear bit, (CTRL=0000001c, STATUS=00000000)
[   10.682274] [MCP] Warning, CTRL=0000000c, STATUS=00000000)
[   10.832732] healthd: No charger supplies found
[   19.185696] init: no such service 'regService'
[   19.190412] init: no such service 'regService'
[   20.085516] r8169 98016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10).
[   20.094459] r8169 98016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
[   21.560988] audit: rate limit exceeded
[   23.213312] init: cannot find '/system/bin/preinstall.sh', disabling 'preinstall'
[   24.155636] rtk_btusb: download_patch: Cold reset bt chip only download
[   24.590666] rtk_btusb: download_patch: Download fw patch done, fw len 24165
[   27.474826] init: avc:  denied  { set } for property=rockchip.media.musiccount scontext=u:r:system_app:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service