Skip to content

Instantly share code, notes, and snippets.

@matoken

matoken/rpios-amd64-2022-04-04.txt

Created April 8, 2022 13:29
Show Gist options
  • Save matoken/9756d7ca3c212f21cf5127818a3933e0 to your computer and use it in GitHub Desktop.
Save matoken/9756d7ca3c212f21cf5127818a3933e0 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
rpios-amd64-2022-04-04.txt
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.32-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1538 SMP PREEMPT Thu Mar 31 19:40:39 BST 2022
[ 0.000000] Machine model: Raspberry Pi 3 Model B
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000038000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003bffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003bffffff]
[ 0.000000] percpu: Embedded 28 pages/cpu s77144 r8192 d29352 u114688
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 843419
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 241920
[ 0.000000] Kernel command line: console=ttyAMA0 root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 874500K/983040K available (11456K kernel code, 1962K rwdata, 4144K rodata, 3776K init, 964K bss, 43004K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 37889 entries in 149 pages
[ 0.000000] ftrace: allocated 149 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
[ 0.000000] random: get_random_bytes called from start_kernel+0x510/0x6f8 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
[ 0.000992] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns
[ 0.169500] Console: colour dummy device 80x25
[ 0.196045] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000)
[ 0.202814] pid_max: default: 32768 minimum: 301
[ 0.212500] LSM: Security Framework initializing
[ 0.242372] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.249949] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.535193] cgroup: Disabling memory control group subsystem
[ 1.740973] rcu: Hierarchical SRCU implementation.
[ 1.932695] EFI services will not be available.
[ 2.004776] smp: Bringing up secondary CPUs ...
[ 2.190948] Detected VIPT I-cache on CPU1
[ 2.217982] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 2.526923] Detected VIPT I-cache on CPU2
[ 2.528074] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 2.629677] Detected VIPT I-cache on CPU3
[ 2.630831] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 2.646328] smp: Brought up 1 node, 4 CPUs
[ 2.647344] SMP: Total of 4 processors activated.
[ 2.648079] CPU features: detected: 32-bit EL0 Support
[ 2.650276] CPU features: detected: 32-bit EL1 Support
[ 2.650958] CPU features: detected: CRC32 instructions
[ 4.680848] CPU: All CPU(s) started at EL2
[ 4.686550] alternatives: patching kernel code
[ 4.810670] devtmpfs: initialized
[ 5.087933] Enabled cp15_barrier support
[ 5.089458] Enabled setend support
[ 5.096234] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 5.098082] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 5.132006] pinctrl core: initialized pinctrl subsystem
[ 5.190117] DMI not present or invalid.
[ 5.220333] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 5.371017] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 5.377258] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 5.383569] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 5.387274] audit: initializing netlink subsys (disabled)
[ 5.402716] audit: type=2000 audit(2.928:1): state=initialized audit_enabled=0 res=1
[ 5.423046] thermal_sys: Registered thermal governor 'step_wise'
[ 5.438470] cpuidle: using governor menu
[ 5.443315] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 5.453199] ASID allocator initialised with 65536 entries
[ 5.460503] Serial: AMBA PL011 UART driver
[ 5.645116] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 5.935352] raspberrypi-firmware soc:firmware: Attached to firmware from 1970-01-05T00:12:17, variant unknown
[ 5.942187] raspberrypi-firmware soc:firmware: Firmware hash is ffffff8000000000000000000960b910ffffffc0
[ 6.724874] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[ 7.009057] vgaarb: loaded
[ 7.030200] SCSI subsystem initialized
[ 7.044538] usbcore: registered new interface driver usbfs
[ 7.049109] usbcore: registered new interface driver hub
[ 7.052172] usbcore: registered new device driver usb
[ 7.066186] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 7.087398] pps_core: LinuxPPS API ver. 1 registered
[ 7.087831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 7.088685] PTP clock support registered
[ 7.177490] clocksource: Switched to clocksource arch_sys_counter
[ 8.330088] VFS: Disk quotas dquot_6.6.0
[ 8.332301] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 8.340253] FS-Cache: Loaded
[ 8.348591] CacheFiles: Loaded
[ 9.065514] NET: Registered PF_INET protocol family
[ 9.090780] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 9.232451] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 9.233878] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 9.238423] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 9.241105] TCP: Hash tables configured (established 8192 bind 8192)
[ 9.279004] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 9.282485] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 9.303817] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 9.343184] RPC: Registered named UNIX socket transport module.
[ 9.344060] RPC: Registered udp transport module.
[ 9.344271] RPC: Registered tcp transport module.
[ 9.344566] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.345524] PCI: CLS 0 bytes, default 64
[ 9.424160] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 5 counters available
[ 9.434908] kvm [1]: IPA Size Limit: 40 bits
[ 9.481062] kvm [1]: Hyp mode initialized successfully
[ 16.928238] Initialise system trusted keyrings
[ 16.941977] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 17.076180] zbud: loaded
[ 17.116210] FS-Cache: Netfs 'nfs' registered for caching
[ 17.133070] NFS: Registering the id_resolver key type
[ 17.135159] Key type id_resolver registered
[ 17.136170] Key type id_legacy registered
[ 17.139444] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 17.141392] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 17.170822] Key type asymmetric registered
[ 17.172252] Asymmetric key parser 'x509' registered
[ 17.174786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 17.182094] io scheduler mq-deadline registered
[ 17.182746] io scheduler kyber registered
[ 17.260032] brcmvirt-gpio soc:virtgpio: Failed to set gpiovirtbuf, trying to get err:0
[ 17.264818] ------------[ cut here ]------------
[ 17.265283] WARNING: CPU: 1 PID: 1 at arch/arm64/mm/ioremap.c:46 __ioremap_caller+0xd4/0xf8
[ 17.265756] Modules linked in:
[ 17.267312] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.32-v8+ #1538
[ 17.268547] Hardware name: Raspberry Pi 3 Model B (DT)
[ 17.269696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 17.270106] pc : __ioremap_caller+0xd4/0xf8
[ 17.270413] lr : __ioremap_caller+0x5c/0xf8
[ 17.270630] sp : ffffffc00960bb40
[ 17.270828] x29: ffffffc00960bb40 x28: 0000000000000000 x27: ffffffc008f60428
[ 17.271585] x26: ffffffc008fd1060 x25: 0000000000000006 x24: ffffff8001837800
[ 17.271971] x23: 0068000000000713 x22: ffffffc00868e3bc x21: 0000000000000000
[ 17.272998] x20: 0000000002649000 x19: 0000000000001000 x18: 0000000000000010
[ 17.273410] x17: 6f7420676e697972 x16: 74202c6675627472 x15: 69766f6970672074
[ 17.273780] x14: 6573206f74206465 x13: ffffffc00960d000 x12: 0000000000000001
[ 17.274135] x11: 0000000000000000 x10: 0000000000000040 x9 : ffffffc0080349c0
[ 17.274683] x8 : 000000003c000000 x7 : 0000000000000018 x6 : ffffffc009546398
[ 17.275020] x5 : ffffffc009546398 x4 : 0000000000000001 x3 : 0000000000000001
[ 17.275335] x2 : 000000003c000000 x1 : 0000000000000000 x0 : 0000000000000001
[ 17.276241] Call trace:
[ 17.276459] __ioremap_caller+0xd4/0xf8
[ 17.276738] __ioremap+0x30/0x60
[ 17.276856] brcmvirt_gpio_probe+0x224/0x2e0
[ 17.276983] platform_probe+0x70/0xe0
[ 17.277106] really_probe+0xc0/0x318
[ 17.277212] __driver_probe_device+0x80/0xe8
[ 17.277572] driver_probe_device+0x88/0x118
[ 17.277763] __driver_attach+0x78/0x110
[ 17.277939] bus_for_each_dev+0x7c/0xd0
[ 17.278089] driver_attach+0x2c/0x38
[ 17.278191] bus_add_driver+0x194/0x1f8
[ 17.278291] driver_register+0x6c/0x128
[ 17.278393] __platform_driver_register+0x30/0x40
[ 17.278505] brcmvirt_gpio_driver_init+0x24/0x30
[ 17.278623] do_one_initcall+0x54/0x2a0
[ 17.278731] kernel_init_freeable+0x250/0x2d8
[ 17.278853] kernel_init+0x2c/0x130
[ 17.278975] ret_from_fork+0x10/0x20
[ 17.279671] ---[ end trace a5dc6fed328a6fcd ]---
[ 17.281507] brcmvirt-gpio soc:virtgpio: Failed to map physical address
[ 17.281949] brcmvirt-gpio: probe of soc:virtgpio failed with error -2
[ 17.292548] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 0 config (0 80)
[ 17.294012] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 1 config (0 81)
[ 17.295888] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 2 config (0 82)
[ 17.297938] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 3 config (0 83)
[ 17.299075] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 4 config (0 84)
[ 17.300563] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 5 config (0 85)
[ 17.304029] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 6 config (0 86)
[ 17.306798] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 7 config (0 87)
[ 17.338658] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
[ 17.339312] bcm2708_fb: probe of soc:fb failed with error -2
[ 17.478686] bcm2835-rng 3f104000.rng: hwrng registered
[ 17.493863] vc-mem: phys_addr:0x00000000 mem_base=0x00000000 mem_size:0x00000000(0 MiB)
[ 17.530040] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 17.545902] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 18.108590] brd: module loaded
[ 18.393956] loop: module loaded
[ 18.413012] Loading iSCSI transport class v2.0-870.
[ 18.492535] usbcore: registered new interface driver r8152
[ 18.494033] usbcore: registered new interface driver lan78xx
[ 18.495258] usbcore: registered new interface driver smsc95xx
[ 18.502178] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 18.725258] Core Release: 2.94a
[ 18.726477] Setting default values for core params
[ 18.733309] Finished setting default values for core params
[ 18.958380] Using Buffer DMA mode
[ 18.959028] Periodic Transfer Interrupt Enhancement - disabled
[ 18.959866] Multiprocessor Interrupt Enhancement - disabled
[ 18.960607] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 18.961921] Shared Tx FIFO mode
[ 18.998885]
[ 18.999133] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = ffffffc0097b9000 dma = 0x00000000f8080000 len=9024
[ 19.000432] FIQ FSM acceleration enabled for :
[ 19.000432] Non-periodic Split Transactions
[ 19.000432] Periodic Split Transactions
[ 19.000432] High-Speed Isochronous Endpoints
[ 19.000432] Interrupt/Control Split Transaction hack enabled
[ 19.001978]
[ 19.002089] WARN::hcd_init_fiq:497: MPHI regs_base at ffffffc009635000
[ 19.005974] dwc_otg 3f980000.usb: DWC OTG Controller
[ 19.009307] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 19.013073] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
[ 19.016205] Init: Port Power? op_state=1
[ 19.016594] Init: Power Port (1)
[ 19.049189] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 19.049568] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.049800] usb usb1: Product: DWC OTG Controller
[ 19.050019] usb usb1: Manufacturer: Linux 5.15.32-v8+ dwc_otg_hcd
[ 19.050230] usb usb1: SerialNumber: 3f980000.usb
[ 19.076850] hub 1-0:1.0: USB hub found
[ 19.080256] hub 1-0:1.0: 1 port detected
[ 19.130492] usbcore: registered new interface driver uas
[ 19.132825] usbcore: registered new interface driver usb-storage
[ 19.138217] mousedev: PS/2 mouse device common for all mice
[ 19.164844] cpu cpu0: Cannot get clock for CPU0
[ 19.165215] raspberrypi-cpufreq: probe of raspberrypi-cpufreq failed with error -2
[ 19.175816] sdhci: Secure Digital Host Controller Interface driver
[ 19.176438] sdhci: Copyright(c) Pierre Ossman
[ 19.181049] sdhci-pltfm: SDHCI platform and OF driver helper
[ 19.202902] ledtrig-cpu: registered to indicate activity on CPUs
[ 19.220423] hid: raw HID events driver (C) Jiri Kosina
[ 19.224610] usbcore: registered new interface driver usbhid
[ 19.224942] usbhid: USB HID core driver
[ 19.230019] ashmem: initialized
[ 19.281320] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase
[ 19.281968] vchiq: could not initialize vchiq platform
[ 19.299914] Initializing XFRM netlink socket
[ 19.301137] NET: Registered PF_PACKET protocol family
[ 19.306647] Key type dns_resolver registered
[ 19.330937] registered taskstats version 1
[ 19.332251] Loading compiled-in X.509 certificates
[ 19.346456] Key type ._fscrypt registered
[ 19.346821] Key type .fscrypt registered
[ 19.347109] Key type fscrypt-provisioning registered
[ 19.542962] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 19.553142] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
[ 19.924573] printk: console [ttyAMA0] enabled
[ 19.958080] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 5 config (0 85)
[ 19.962720] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 5 config (0 85)
[ 19.967945] reg-fixed-voltage cam1_regulator: error -EIO: can't get GPIO
[ 19.970079] reg-fixed-voltage: probe of cam1_regulator failed with error -5
[ 19.997806] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default
[ 20.007324] bcm2835-aux-uart 3f215040.serial: error -ENOSPC: unable to register 8250 port
[ 20.010783] bcm2835-aux-uart: probe of 3f215040.serial failed with error -28
[ 20.049459] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 20.057240] bcm2835-power bcm2835-power: ASB register ID returned 0x00000000
[ 20.076682] bcm2835_thermal 3f212000.thermal: Not able to read trip_temp: -33
[ 20.179716] bcm2835-clk 3f101000.cprman: tsens: couldn't lock PLL
[ 20.181528] bcm2835_thermal: probe of 3f212000.thermal failed with error -33
[ 20.205466] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 20.207173] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 20.268877] sdhost: log_buf @ (____ptrval____) (c2028000)
[ 20.352175] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 20.374789] of_cfs_init
[ 20.390906] of_cfs_init: OK
[ 20.441876] mmc0: host does not support reading read-only switch, assuming write-enable
[ 20.459184] uart-pl011 3f201000.serial: no DMA platform data
[ 20.462979] mmc0: new high speed SDHC card at address 4567
[ 20.500203] mmcblk0: mmc0:4567 QEMU! 8.00 GiB
[ 20.610220] mmcblk0: p1 p2
[ 20.629571] mmcblk0: mmc0:4567 QEMU! 8.00 GiB
[ 23.180163] random: fast init done
[ 25.088836] EXT4-fs (mmcblk0p2): recovery complete
[ 25.105584] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 25.113305] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 25.142621] devtmpfs: mounted
[ 25.335693] Freeing unused kernel memory: 3776K
[ 25.348299] Run /sbin/init as init process
[ 27.642275] hrtimer: interrupt took 19611680 ns
[ 30.328476] mmc1: Timeout waiting for hardware interrupt.
[ 38.694250] systemd[1]: System time before build time, advancing clock.
[ 47.018023] NET: Registered PF_INET6 protocol family
[ 47.166223] Segment Routing with IPv6
[ 47.170985] In-situ OAM (IOAM) with IPv6
[ 49.486996] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 49.518609] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 11 (bullseye)!
[ 49.694060] systemd[1]: Set hostname to <raspberrypi>.
[ 50.850761] cam-dummy-reg: disabling
[ 101.711164] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 110.506859] random: crng init done
[ 111.078357] systemd[1]: Queued start job for default target Graphical Interface.
[ 111.316939] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 111.390260] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 111.424052] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ 111.470735] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 111.557338] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 111.652790] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary…s File System Automount Point.
[ 111.687189] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 111.704263] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 111.778288] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 111.810909] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 111.846795] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 111.892544] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 111.928315] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 111.973763] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 112.087505] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 112.185987] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 112.229643] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 112.389589] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 112.507004] systemd[1]: Mounting RPC Pipe File System...
Mounting RPC Pipe File System...
[ 112.794494] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 113.058378] systemd[1]: Mounting Kernel Trace File System...
Mounting Kernel Trace File System...
[ 113.263083] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 113.804356] systemd[1]: Starting Restore / save the current clock...
Starting Restore / save the current clock...
[ 115.382355] systemd[1]: Starting Set the console keyboard layout...
Starting Set the console keyboard layout...
[ 116.026847] systemd[1]: Starting Create list of static device nodes for the current kernel...
Starting Create list of st…odes for the current kernel...
[ 117.289732] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 118.713195] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 119.841489] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 120.032127] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 120.071261] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 125.574006] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 127.286241] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 127.489592] fuse: init (API version 7.34)
[ 128.740399] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 129.448214] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 137.764336] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 138.789307] systemd[1]: Mounted RPC Pipe File System.
[ OK ] Mounted RPC Pipe File System.
[ 139.816981] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 140.214848] systemd[1]: Mounted Kernel Trace File System.
[ OK ] Mounted Kernel Trace File System.
[ 141.051157] systemd[1]: Finished Restore / save the current clock.
[ OK ] Finished Restore / save the current clock.
[ 141.862907] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ OK ] Finished Create list of st… nodes for the current kernel.
[ 142.312478] systemd[1]: modprobe@configfs.service: Succeeded.
[ 142.550249] systemd[1]: Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module configfs.
[ 142.792433] systemd[1]: modprobe@configfs.service: Consumed 4.099s CPU time.
[ 142.866048] i2c_dev: i2c /dev entries driver
[ 142.938911] systemd[1]: modprobe@drm.service: Succeeded.
[ 143.012113] systemd[1]: Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module drm.
[ 143.053072] systemd[1]: modprobe@drm.service: Consumed 9.581s CPU time.
[ 143.149638] systemd[1]: modprobe@fuse.service: Succeeded.
[ 143.278247] systemd[1]: Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Module fuse.
[ 143.332245] systemd[1]: modprobe@fuse.service: Consumed 5.093s CPU time.
[ 143.505150] systemd[1]: Finished Load Kernel Modules.
[ OK ] Finished Load Kernel Modules.
[ 143.919771] systemd[1]: Mounting FUSE Control File System...
Mounting FUSE Control File System...
[ 144.963208] systemd[1]: Mounting Kernel Configuration File System...
Mounting Kernel Configuration File System...
[ 145.638016] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
Starting Create System Users...
[ OK ] Started Journal Service.
[ OK ] Finished Load/Save Random Seed.
[ OK ] Finished Create System Users.
Starting Flush Journal to Persistent Storage...
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Set the console keyboard layout.
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
Starting Rule-based Manage…for Device Events and Files...
[ TIME ] Timed out waiting for device isk/by-partuuid/50a67c3e-01.
[DEPEND] Dependency failed for File…/disk/by-partuuid/50a67c3e-01.
[DEPEND] Dependency failed for /boot.
[DEPEND] Dependency failed for Local File Systems.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Stopped Forward Password R…uests to Wall Directory Watch.
[ OK ] Reached target Timers.
Starting Set console font and keymap...
Starting Preprocess NFS configuration...
[ OK ] Closed Syslog Socket.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Paths.
[ OK ] Reached target Sockets.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Started Emergency Shell.
[ OK ] Reached target Emergency Mode.
Starting Tell Plymouth To Write Out Runtime Data...
Starting Create Volatile Files and Directories...
[ OK ] Finished Set console font and keymap.
[ OK ] Finished Preprocess NFS configuration.
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
[ OK ] Reached target NFS client services.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
You are in emergency mode. After logging in, type "journalctl -xb" to view
system logs, "systemctl reboot" to reboot, "systemctl default" or "exit"
to boot into default mode.
Cannot open access to console, the root account is locked.
See sulogin(8) man page for more details.
Press Enter to continue.
Reloading system manager configuration
Starting default target
qemu-system-aarch64: terminating on signal 15 from pid 306564 (killall)
matoken@t430s:~/Downloads/pi$ sudo qemu-system-aarch64 -m 1024 -M raspi3b -kernel kernel8.img -dtb bcm2710-rpi-3-b.dtb -sd 2022-04-04-raspios-bullseye-arm64.img -append "console=ttyAMA0 root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4" -nographic ^C
130 matoken@t430s:~/Downloads/pi$ qemu-system-aarch64 \
-m 1024 \
-M raspi3b \
-kernel kernel8.img \
-dtb bcm2710-rpi-3-b.dtb \
-drive format=raw,file=2022-04-04-raspios-bullseye-arm64.img \
-append "console=ttyAMA0 root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4 dwc_otg.fiq_fsm_enable=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720" \
-serial stdio \
-no-reboot \
-device usb-kbd \
-device usb-mouse \
-device usb-net,netdev=net0 \
-netdev user,id=net0,hostfwd=tcp::2222-:22
qemu-system-aarch64: terminating on signal 2
matoken@t430s:~/Downloads/pi$ qemu-system-aarch64 -m 1024 -M raspi3b -kernel kernel8.img -dtb bcm2710-rpi-3-b.dtb -drive format=raw,file=2022-04-04-raspios-bullseye-arm64.img -append "console=ttyAMA0 root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4 dwc_otg.fiq_fsm_enable=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720" -serial stdio -no-reboot -device usb-kbd -device usb-mouse -device usb-net,netdev=net0 -netdev user,id=net0,hostfwd=tcp::2222-:22
130 matoken@t430s:~/Downloads/pi$ sudo !!
sudo qemu-system-aarch64 -m 1024 -M raspi3b -kernel kernel8.img -dtb bcm2710-rpi-3-b.dtb -drive format=raw,file=2022-04-04-raspios-bullseye-arm64.img -append "console=ttyAMA0 root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4 dwc_otg.fiq_fsm_enable=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720" -serial stdio -no-reboot -device usb-kbd -device usb-mouse -device usb-net,netdev=net0 -netdev user,id=net0,hostfwd=tcp::2222-:22
[sudo] password for matoken:
sudo: a password is required
1 matoken@t430s:~/Downloads/pi$
exit
matoken@t430s:~/Downloads/pi$ ttyrec
,---._ matoken@t430s
/` __ \ OS: Debian bookworm/sid
| / | KERNEL: Linux 5.16.10-le9
| `.__.` UPTIME: 22 hours, 47 minutes
\ PACKAGES: 7719
`-,_ SHELL: bash
DE: awesome
matoken@t430s:~/Downloads/pi$ sudo qemu-system-aarch64 -m 1024 -M raspi3b -kernel kernel8.img -dtb bcm2710-rpi-3-b.dtb -drive format=raw,file=2022-04-04-raspios-bullseye-arm64.img -append "console=ttyAMA0 root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4 dwc_otg.fiq_fsm_enable=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720" -serial stdio -no-reboot -device usb-kbd -device usb-mouse -device usb-net,netdev=net0 -netdev user,id=net0,hostfwd=tcp::2222-:22
[sudo] password for matoken:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.32-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1538 SMP PREEMPT Thu Mar 31 19:40:39 BST 2022
[ 0.000000] Machine model: Raspberry Pi 3 Model B
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000038000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003bffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003bffffff]
[ 0.000000] percpu: Embedded 28 pages/cpu s77144 r8192 d29352 u114688
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 843419
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 241920
[ 0.000000] Kernel command line: console=ttyAMA0 root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4 dwc_otg.fiq_fsm_enable=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 874500K/983040K available (11456K kernel code, 1962K rwdata, 4144K rodata, 3776K init, 964K bss, 43004K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 37889 entries in 149 pages
[ 0.000000] ftrace: allocated 149 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
[ 0.000000] random: get_random_bytes called from start_kernel+0x510/0x6f8 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
[ 0.000706] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns
[ 0.199699] Console: colour dummy device 80x25
[ 0.223894] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000)
[ 0.225629] pid_max: default: 32768 minimum: 301
[ 0.237774] LSM: Security Framework initializing
[ 0.336926] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.351061] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 2.022941] cgroup: Disabling memory control group subsystem
[ 4.792178] rcu: Hierarchical SRCU implementation.
[ 5.386635] EFI services will not be available.
[ 5.497611] smp: Bringing up secondary CPUs ...
[ 5.808785] Detected VIPT I-cache on CPU1
[ 5.825369] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 6.351521] Detected VIPT I-cache on CPU2
[ 6.353419] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 6.437268] Detected VIPT I-cache on CPU3
[ 6.438839] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 6.454179] smp: Brought up 1 node, 4 CPUs
[ 6.454979] SMP: Total of 4 processors activated.
[ 6.456036] CPU features: detected: 32-bit EL0 Support
[ 6.456441] CPU features: detected: 32-bit EL1 Support
[ 6.457344] CPU features: detected: CRC32 instructions
[ 9.403222] CPU: All CPU(s) started at EL2
[ 9.418506] alternatives: patching kernel code
[ 9.590946] devtmpfs: initialized
[ 10.288656] Enabled cp15_barrier support
[ 10.290987] Enabled setend support
[ 10.303895] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 10.304969] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 10.354797] pinctrl core: initialized pinctrl subsystem
[ 10.510242] DMI not present or invalid.
[ 10.589758] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 11.193354] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 11.257082] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 11.288396] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 11.300802] audit: initializing netlink subsys (disabled)
[ 11.377925] audit: type=2000 audit(3.724:1): state=initialized audit_enabled=0 res=1
[ 11.508012] thermal_sys: Registered thermal governor 'step_wise'
[ 11.716132] cpuidle: using governor menu
[ 11.739431] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 11.821462] ASID allocator initialised with 65536 entries
[ 11.865495] Serial: AMBA PL011 UART driver
[ 12.927417] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 13.803853] raspberrypi-firmware soc:firmware: Attached to firmware from 1970-01-05T00:12:17, variant unknown
[ 13.823563] raspberrypi-firmware soc:firmware: Firmware hash is ffffff8000000000000000000960b910ffffffc0
[ 17.713450] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[ 19.126333] vgaarb: loaded
[ 19.194762] SCSI subsystem initialized
[ 19.276014] usbcore: registered new interface driver usbfs
[ 19.296197] usbcore: registered new interface driver hub
[ 19.300148] usbcore: registered new device driver usb
[ 19.349151] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 19.415216] pps_core: LinuxPPS API ver. 1 registered
[ 19.415792] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 19.417479] PTP clock support registered
[ 20.156247] clocksource: Switched to clocksource arch_sys_counter
[ 20.233199] hrtimer: interrupt took 23051232 ns
[ 24.771490] VFS: Disk quotas dquot_6.6.0
[ 24.776971] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 24.797181] FS-Cache: Loaded
[ 24.807139] CacheFiles: Loaded
[ 25.581505] NET: Registered PF_INET protocol family
[ 25.629502] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 25.733402] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 25.734935] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 25.737873] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 25.746568] TCP: Hash tables configured (established 8192 bind 8192)
[ 25.789329] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 25.796427] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 25.813884] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 25.862197] RPC: Registered named UNIX socket transport module.
[ 25.862658] RPC: Registered udp transport module.
[ 25.862862] RPC: Registered tcp transport module.
[ 25.863385] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 25.864741] PCI: CLS 0 bytes, default 64
[ 25.956465] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 5 counters available
[ 25.964881] kvm [1]: IPA Size Limit: 40 bits
[ 26.032011] kvm [1]: Hyp mode initialized successfully
[ 32.134662] Initialise system trusted keyrings
[ 32.189844] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 32.516425] zbud: loaded
[ 32.601549] FS-Cache: Netfs 'nfs' registered for caching
[ 32.626831] NFS: Registering the id_resolver key type
[ 32.629645] Key type id_resolver registered
[ 32.630112] Key type id_legacy registered
[ 32.640361] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 32.641903] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 32.691505] Key type asymmetric registered
[ 32.692495] Asymmetric key parser 'x509' registered
[ 32.697046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 32.710073] io scheduler mq-deadline registered
[ 32.710871] io scheduler kyber registered
[ 32.848073] brcmvirt-gpio soc:virtgpio: Failed to set gpiovirtbuf, trying to get err:0
[ 32.859260] ------------[ cut here ]------------
[ 32.859665] WARNING: CPU: 1 PID: 1 at arch/arm64/mm/ioremap.c:46 __ioremap_caller+0xd4/0xf8
[ 32.860047] Modules linked in:
[ 32.861430] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.32-v8+ #1538
[ 32.862617] Hardware name: Raspberry Pi 3 Model B (DT)
[ 32.863594] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 32.864002] pc : __ioremap_caller+0xd4/0xf8
[ 32.864359] lr : __ioremap_caller+0x5c/0xf8
[ 32.864621] sp : ffffffc00960bb40
[ 32.864806] x29: ffffffc00960bb40 x28: 0000000000000000 x27: ffffffc008f60428
[ 32.865537] x26: ffffffc008fd1060 x25: 0000000000000006 x24: ffffff80019ee400
[ 32.866182] x23: 0068000000000713 x22: ffffffc00868e3bc x21: 0000000000000000
[ 32.866582] x20: 000000000299f000 x19: 0000000000001000 x18: 0000000000000010
[ 32.866965] x17: 6f7420676e697972 x16: 74202c6675627472 x15: 69766f6970672074
[ 32.870153] x14: 6573206f74206465 x13: ffffffc00960d000 x12: 0000000000000001
[ 32.870545] x11: 0000000000000000 x10: 0000000000000040 x9 : ffffffc0080349c0
[ 32.872117] x8 : 000000003c000000 x7 : 0000000000000018 x6 : ffffffc009546398
[ 32.872631] x5 : ffffffc009546398 x4 : 0000000000000001 x3 : 0000000000000001
[ 32.873102] x2 : 000000003c000000 x1 : 0000000000000000 x0 : 0000000000000001
[ 32.874071] Call trace:
[ 32.874311] __ioremap_caller+0xd4/0xf8
[ 32.874676] __ioremap+0x30/0x60
[ 32.874864] brcmvirt_gpio_probe+0x224/0x2e0
[ 32.875001] platform_probe+0x70/0xe0
[ 32.875129] really_probe+0xc0/0x318
[ 32.875239] __driver_probe_device+0x80/0xe8
[ 32.875348] driver_probe_device+0x88/0x118
[ 32.875455] __driver_attach+0x78/0x110
[ 32.875592] bus_for_each_dev+0x7c/0xd0
[ 32.875724] driver_attach+0x2c/0x38
[ 32.875834] bus_add_driver+0x194/0x1f8
[ 32.875938] driver_register+0x6c/0x128
[ 32.876050] __platform_driver_register+0x30/0x40
[ 32.876162] brcmvirt_gpio_driver_init+0x24/0x30
[ 32.876321] do_one_initcall+0x54/0x2a0
[ 32.876729] kernel_init_freeable+0x250/0x2d8
[ 32.877189] kernel_init+0x2c/0x130
[ 32.877487] ret_from_fork+0x10/0x20
[ 32.879108] ---[ end trace 4e5ff188820b9762 ]---
[ 32.885680] brcmvirt-gpio soc:virtgpio: Failed to map physical address
[ 32.886832] brcmvirt-gpio: probe of soc:virtgpio failed with error -2
[ 32.954462] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 0 config (0 80)
[ 32.957643] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 1 config (0 81)
[ 32.961347] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 2 config (0 82)
[ 32.969865] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 3 config (0 83)
[ 32.978611] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 4 config (0 84)
[ 32.985001] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 5 config (0 85)
[ 33.013191] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 6 config (0 86)
[ 33.014867] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 7 config (0 87)
[ 33.064051] bcm2708_fb soc:fb: More displays reported from firmware than supported in driver (141879824 vs 3)
[ 33.064823] bcm2708_fb soc:fb: FB found 3 display(s)
[ 34.073863] Console: switching to colour frame buffer device 160x45
[ 34.370204] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1280x720
[ 34.497045] bcm2708_fb soc:fb: Registered framebuffer for display 1, size 1280x720
[ 34.654031] bcm2708_fb soc:fb: Registered framebuffer for display 2, size 1280x720
[ 35.327276] bcm2835-rng 3f104000.rng: hwrng registered
[ 35.396149] vc-mem: phys_addr:0x00000000 mem_base=0x00000000 mem_size:0x00000000(0 MiB)
[ 35.497508] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 35.572238] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 39.065768] brd: module loaded
[ 39.844746] loop: module loaded
[ 39.865900] Loading iSCSI transport class v2.0-870.
[ 40.053957] usbcore: registered new interface driver r8152
[ 40.062604] usbcore: registered new interface driver lan78xx
[ 40.065234] usbcore: registered new interface driver smsc95xx
[ 40.082206] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 40.447924] Core Release: 2.94a
[ 40.449608] Setting default values for core params
[ 40.464981] Finished setting default values for core params
[ 40.742595] Using Buffer DMA mode
[ 40.743490] Periodic Transfer Interrupt Enhancement - disabled
[ 40.743781] Multiprocessor Interrupt Enhancement - disabled
[ 40.744193] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 40.745183] Shared Tx FIFO mode
[ 40.774993]
[ 40.776556] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = ffffffc0097b9000 dma = 0x00000000f8090000 len=9024
[ 40.778944]
[ 40.779579] WARN::hcd_init_fiq:497: MPHI regs_base at ffffffc009635000
[ 40.787073] dwc_otg 3f980000.usb: DWC OTG Controller
[ 40.793418] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 40.798930] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
[ 40.808215] Init: Port Power? op_state=1
[ 40.808677] Init: Power Port (1)
[ 40.864456] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 40.864818] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 40.865049] usb usb1: Product: DWC OTG Controller
[ 40.865285] usb usb1: Manufacturer: Linux 5.15.32-v8+ dwc_otg_hcd
[ 40.865505] usb usb1: SerialNumber: 3f980000.usb
[ 40.943075] hub 1-0:1.0: USB hub found
[ 40.947794] hub 1-0:1.0: 1 port detected
[ 41.058955] usbcore: registered new interface driver uas
[ 41.061270] usbcore: registered new interface driver usb-storage
[ 41.066856] mousedev: PS/2 mouse device common for all mice
[ 41.108852] cpu cpu0: Cannot get clock for CPU0
[ 41.109298] raspberrypi-cpufreq: probe of raspberrypi-cpufreq failed with error -2
[ 41.118840] sdhci: Secure Digital Host Controller Interface driver
[ 41.119463] sdhci: Copyright(c) Pierre Ossman
[ 41.130421] sdhci-pltfm: SDHCI platform and OF driver helper
[ 41.169172] ledtrig-cpu: registered to indicate activity on CPUs
[ 41.193262] hid: raw HID events driver (C) Jiri Kosina
[ 41.197773] usbcore: registered new interface driver usbhid
[ 41.198087] usbhid: USB HID core driver
[ 41.208197] ashmem: initialized
[ 41.254896] Indeed it is in host mode hprt0 = 00021101
[ 41.278310] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase
[ 41.279479] vchiq: could not initialize vchiq platform
[ 41.305874] Initializing XFRM netlink socket
[ 41.308922] NET: Registered PF_PACKET protocol family
[ 41.316163] Key type dns_resolver registered
[ 41.360827] registered taskstats version 1
[ 41.361794] Loading compiled-in X.509 certificates
[ 41.382290] Key type ._fscrypt registered
[ 41.382605] Key type .fscrypt registered
[ 41.382876] Key type fscrypt-provisioning registered
[ 41.476383] usb 1-1: new full-speed USB device number 2 using dwc_otg
[ 41.511932] Indeed it is in host mode hprt0 = 00021101
[ 41.706352] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 41.715594] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
[ 41.977050] usb 1-1: New USB device found, idVendor=0409, idProduct=55aa, bcdDevice= 1.01
[ 42.001227] printk: console [ttyAMA0] enabled
[ 42.008081] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 42.008511] usb 1-1: Product: QEMU USB Hub
[ 42.008750] usb 1-1: Manufacturer: QEMU
[ 42.008960] usb 1-1: SerialNumber: 314159-1
[ 42.151648] hub 1-1:1.0: USB hub found
[ 42.364450] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 5 config (0 85)
[ 42.378655] hub 1-1:1.0: 8 ports detected
[ 42.394969] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get GPIO 5 config (0 85)
[ 43.694538] usb 1-1.1: new full-speed USB device number 3 using dwc_otg
[ 43.884925] reg-fixed-voltage cam1_regulator: error -EIO: can't get GPIO
[ 43.886121] reg-fixed-voltage: probe of cam1_regulator failed with error -5
[ 44.070390] random: fast init done
[ 44.163750] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default
[ 44.199214] bcm2835-aux-uart 3f215040.serial: error -ENOSPC: unable to register 8250 port
[ 44.213316] bcm2835-aux-uart: probe of 3f215040.serial failed with error -28
[ 44.291292] usb 1-1.1: not running at top speed; connect to a high speed hub
[ 44.392063] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 44.427004] usb 1-1.1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[ 44.430128] usb 1-1.1: New USB device strings: Mfr=1, Product=4, SerialNumber=11
[ 44.431800] usb 1-1.1: Product: QEMU USB Keyboard
[ 44.436184] bcm2835-power bcm2835-power: ASB register ID returned 0x00000000
[ 44.462286] usb 1-1.1: Manufacturer: QEMU
[ 44.462602] usb 1-1.1: SerialNumber: 68284-1.1
[ 44.553290] bcm2835_thermal 3f212000.thermal: Not able to read trip_temp: -33
[ 44.726985] bcm2835-clk 3f101000.cprman: tsens: couldn't lock PLL
[ 44.831123] bcm2835_thermal: probe of 3f212000.thermal failed with error -33
[ 45.310798] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 45.342024] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 45.545950] input: QEMU QEMU USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:0627:0001.0001/input/input0
[ 45.673860] sdhost: log_buf @ (____ptrval____) (c2a8e000)
[ 45.815204] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-3f980000.usb-1.1/input0
[ 46.050063] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 46.348955] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ 46.439255] of_cfs_init
[ 46.793216] of_cfs_init: OK
[ 47.078847] usb 1-1.2: not running at top speed; connect to a high speed hub
[ 47.269235] uart-pl011 3f201000.serial: no DMA platform data
[ 47.462013] mmc0: host does not support reading read-only switch, assuming write-enable
[ 47.512890] mmc0: new high speed SDHC card at address 4567
[ 47.519006] Waiting for root device /dev/mmcblk0p2...
[ 47.716583] usb 1-1.2: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[ 47.732376] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=9
[ 47.734314] usb 1-1.2: Product: QEMU USB Mouse
[ 47.735385] usb 1-1.2: Manufacturer: QEMU
[ 47.736191] usb 1-1.2: SerialNumber: 89126-1.2
[ 47.793671] mmcblk0: mmc0:4567 QEMU! 8.00 GiB
[ 48.248678] input: QEMU QEMU USB Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0627:0001.0002/input/input1
[ 48.342045] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Mouse] on usb-3f980000.usb-1.2/input0
[ 48.630360] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[ 48.650820] mmcblk0: p1 p2
[ 48.730291] mmcblk0: mmc0:4567 QEMU! 8.00 GiB
usbnet: failed control transaction: request 0x8006 value 0x600 index 0x0 length 0xa
usbnet: failed control transaction: request 0x8006 value 0x600 index 0x0 length 0xa
usbnet: failed control transaction: request 0x8006 value 0x600 index 0x0 length 0xa
[ 49.881317] usb 1-1.3: New USB device found, idVendor=0525, idProduct=a4a2, bcdDevice= 0.00
[ 49.933803] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=10
[ 50.021308] usb 1-1.3: Product: RNDIS/QEMU USB Network Device
[ 50.030682] usb 1-1.3: Manufacturer: QEMU
[ 50.093372] usb 1-1.3: SerialNumber: 1-1.3
[ 55.890486] mmc1: Timeout waiting for hardware interrupt.
[ 73.228874] EXT4-fs (mmcblk0p2): recovery complete
[ 73.252071] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 73.256826] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 73.316545] devtmpfs: mounted
[ 73.698642] Freeing unused kernel memory: 3776K
[ 73.726356] Run /sbin/init as init process
[ 76.056411] random: crng init done
[ 79.504259] cam-dummy-reg: disabling
[ 117.090406] systemd[1]: System time before build time, advancing clock.
[ 123.826284] NET: Registered PF_INET6 protocol family
[ 124.298892] Segment Routing with IPv6
[ 124.316660] In-situ OAM (IOAM) with IPv6
[ 136.990879] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 137.176834] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 11 (bullseye)!
[ 137.952352] systemd[1]: Set hostname to <raspberrypi>.
[ 295.083199] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 318.835648] systemd[1]: Queued start job for default target Graphical Interface.
[ 321.546591] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 322.706762] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 323.116699] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ 323.451735] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 323.676181] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 323.828527] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary…s File System Automount Point.
[ 323.908035] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 323.955916] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 324.268412] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 324.292519] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 324.608028] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 324.971603] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 325.365248] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 325.974769] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 328.746516] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 329.254305] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 329.386565] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 330.499214] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 331.057208] systemd[1]: Mounting RPC Pipe File System...
Mounting RPC Pipe File System...
[ 332.485545] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 333.191100] systemd[1]: Mounting Kernel Trace File System...
Mounting Kernel Trace File System...
[ 333.682443] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 334.896431] systemd[1]: Starting Restore / save the current clock...
Starting Restore / save the current clock...
[ 336.610205] systemd[1]: Starting Set the console keyboard layout...
Starting Set the console keyboard layout...
[ 339.290019] systemd[1]: Starting Create list of static device nodes for the current kernel...
Starting Create list of st…odes for the current kernel...
[ 341.335588] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 345.530708] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 347.859255] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 349.691687] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 350.760229] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 354.305807] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 358.818620] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 361.022873] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 362.529916] fuse: init (API version 7.34)
[ 362.867202] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 369.785484] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 370.141729] systemd[1]: Mounted RPC Pipe File System.
[ OK ] Mounted RPC Pipe File System.
[ 370.710822] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 372.455506] systemd[1]: Mounted Kernel Trace File System.
[ OK ] Mounted Kernel Trace File System.
[ 377.741614] systemd[1]: Finished Restore / save the current clock.
[ OK ] Finished Restore / save the current clock.
[ 378.310844] i2c_dev: i2c /dev entries driver
[ 378.315683] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ OK ] Finished Create list of st… nodes for the current kernel.
[ 379.129962] systemd[1]: modprobe@configfs.service: Succeeded.
[ 379.162964] systemd[1]: Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module configfs.
[ 379.473611] systemd[1]: modprobe@configfs.service: Consumed 4.657s CPU time.
[ 380.172169] systemd[1]: modprobe@drm.service: Succeeded.
[ 380.205638] systemd[1]: Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module drm.
[ 380.254123] systemd[1]: modprobe@drm.service: Consumed 9.365s CPU time.
[ 380.566603] systemd[1]: modprobe@fuse.service: Succeeded.
[ 380.853974] systemd[1]: Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Module fuse.
[ 380.886269] systemd[1]: modprobe@fuse.service: Consumed 6.272s CPU time.
[ 381.084124] systemd[1]: Finished Load Kernel Modules.
[ OK ] Finished Load Kernel Modules.
[ 382.313754] systemd[1]: Mounting FUSE Control File System...
Mounting FUSE Control File System...
[ 389.769552] systemd[1]: Mounting Kernel Configuration File System...
Mounting Kernel Configuration File System...
[ 396.255302] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 415.111827] systemd[1]: Mounted FUSE Control File System.
[ OK ] Mounted FUSE Control File System.
[ 415.529409] systemd[1]: Mounted Kernel Configuration File System.
[ OK ] Mounted Kernel Configuration File System.
[ 415.985967] systemd[1]: dev-ttyAMA0.device: Job dev-ttyAMA0.device/start timed out.
[ 416.162404] systemd[1]: Timed out waiting for device /dev/ttyAMA0.
[ TIME ] Timed out waiting for device /dev/ttyAMA0.
[ 416.885722] systemd[1]: Dependency failed for Serial Getty on ttyAMA0.
[DEPEND] Dependency failed for Serial Getty on ttyAMA0.
[ 416.983124] systemd[1]: serial-getty@ttyAMA0.service: Job serial-getty@ttyAMA0.service/start failed with result 'dependency'.
[ 417.054329] systemd[1]: dev-ttyAMA0.device: Job dev-ttyAMA0.device/start failed with result 'timeout'.
[ 417.106775] systemd[1]: dev-disk-by\x2dpartuuid-50a67c3e\x2d01.device: Job dev-disk-by\x2dpartuuid-50a67c3e\x2d01.device/start timed out.
[ 417.240985] systemd[1]: Timed out waiting for device /dev/disk/by-partuuid/50a67c3e-01.
[ TIME ] Timed out waiting for device isk/by-partuuid/50a67c3e-01.
[DEPEND] Dependency failed for /boot.
[DEPEND] Dependency failed for Local File Systems.
[DEPEND] Dependency failed for File…/disk/by-partuuid/50a67c3e-01.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Stopped Forward Password R…uests to Wall Directory Watch.
[ OK ] Reached target Timers.
Starting Set console font and keymap...
[ OK ] Reached target Login Prompts.
Starting Preprocess NFS configuration...
[ OK ] Closed Syslog Socket.
[ OK ] Reached target Paths.
[ OK ] Reached target Sockets.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Started Emergency Shell.
[ OK ] Reached target Emergency Mode.
Starting Tell Plymouth To Write Out Runtime Data...
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Finished Set console font and keymap.
[ OK ] Finished Preprocess NFS configuration.
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
You are in emergency mode. After logging in, type "journalctl -xb" to view
system logs, "systemctl reboot" to reboot, "systemctl default" or "exit"
to boot into default mode.
Cannot open access to console, the root account is locked.
See sulogin(8) man page for more details.
Press Enter to continue.
Reloading system manager configuration
[ OK ] Started Journal Service.
Starting default target
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Stopped Emergency Shell.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ OK ] Stopped target Emergency Mode.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Listening on Syslog Socket.
Starting Helper to synchronize boot up for ifupdown...
Starting Load Kernel Module configfs...
Starting Load Kernel Module drm...
Starting Load Kernel Module fuse...
Starting Flush Journal to Persistent Storage...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Started Rule-based Manager for Device Events and Files.
Starting Show Plymouth Boot Screen...
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Forward Password R…s to Plymouth Directory Watch.
[ TIME ] Timed out waiting for device isk/by-partuuid/50a67c3e-01.
[DEPEND] Dependency failed for File…/disk/by-partuuid/50a67c3e-01.
[DEPEND] Dependency failed for /boot.
[DEPEND] Dependency failed for Local File Systems.
[ OK ] Stopped Forward Password R…uests to Wall Directory Watch.
Starting Raise network interfaces...
Starting Preprocess NFS configuration...
[ OK ] Closed Syslog Socket.
[ OK ] Started Emergency Shell.
[ OK ] Reached target Emergency Mode.
Starting Create Volatile Files and Directories...
[ OK ] Finished Preprocess NFS configuration.
You are in emergency mode. After logging in, type "journalctl -xb" to view
system logs, "systemctl reboot" to reboot, "systemctl default" or "exit"
to boot into default mode.
Cannot open access to console, the root account is locked.
See sulogin(8) man page for more details.
Press Enter to continue.
Reloading system manager configuration
Failed to reload daemon: Connection timed out
Starting default target
[FAILED] Failed to start Check for Raspberry Pi EEPROM updates.
[FAILED] Failed to start Avahi mDNS/DNS-SD Stack.
[FAILED] Failed to start Configure …ooth Modems connected by UART.
[FAILED] Failed to start Authorization Manager.
[DEPEND] Dependency failed for Modem Manager.
[FAILED] Failed to start User Login Management.
[FAILED] Failed to start WPA supplicant.
[FAILED] Failed to start DHCP Client Daemon.
[FAILED] Failed to start Disk Manager.
Debian GNU/Linux 11 raspberrypi ttyAMA0
raspberrypi login:
Debian GNU/Linux 11 raspberrypi ttyAMA0
[ OK ] Started Show Plymouth Reboot Screen.
[ OK ] Stopped Permit User Sessions.
[ OK ] Stopped target Basic System.
[ OK ] Stopped Forward Password R…s to Plymouth Directory Watch.
[ OK ] Stopped target Network.
[ OK ] Stopped target Paths.
[ OK ] Stopped CUPS Scheduler.
[ OK ] Stopped target Remote File Systems.
[ OK ] Stopped target Remote File Systems (Pre).
[ OK ] Stopped target NFS client services.
[ OK ] Stopped target Slices.
[ OK ] Removed slice User and Session Slice.
[ OK ] Stopped target Sockets.
[ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Closed CUPS Scheduler.
[ OK ] Closed D-Bus System Message Bus Socket.
[ OK ] Closed Syslog Socket.
[ OK ] Closed triggerhappy.socket.
[ OK ] Stopped target System Initialization.
[ OK ] Stopped target Local Encrypted Volumes.
[ OK ] Stopped Dispatch Password …ts to Console Directory Watch.
[ OK ] Stopped Forward Password R…uests to Wall Directory Watch.
[ OK ] Stopped target Swap.
Stopping Restore / save the current clock...
Stopping Raise network interfaces...
Stopping Network Time Synchronization...
Stopping Update UTMP about System Boot/Shutdown...
[ OK ] Stopped Network Time Synchronization.
[ OK ] Stopped Restore / save the current clock.
[ OK ] Stopped Update UTMP about System Boot/Shutdown.
[ OK ] Stopped Create Volatile Files and Directories.
[ OK ] Stopped Raise network interfaces.
[ OK ] Stopped target Local File Systems.
Unmounting /boot...
[ OK ] Stopped Apply Kernel Variables.
[ OK ] Stopped Load Kernel Modules.
[ OK ] Unmounted /boot.
[ OK ] Reached target Unmount All Filesystems.
[ OK ] Stopped File System Check …/disk/by-partuuid/50a67c3e-01.
[ OK ] Removed slice system-systemd\x2dfsck.slice.
[ OK ] Stopped target Local File Systems (Pre).
[ OK ] Stopped Create Static Device Nodes in /dev.
[ OK ] Stopped Create System Users.
[ OK ] Stopped Remount Root and Kernel File Systems.
[ OK ] Reached target Shutdown.
[ OK ] Reached target Final Step.
[ OK ] Finished Reboot.
[ OK ] Reached target Reboot.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment