pcb2gcode thermal relief testcase

front.ngc

( pcb2gcode 1.2.2 )
( Software-independent Gcode )
      
G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
S0 ( RPM spindle speed. )
G64 P0.05080 ( set maximum deviation from commanded toolpath )
F500.00000 ( Feedrate. )

F500.00000 ( Feedrate. )
M3 ( Spindle on clockwise. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X45.99940 Y-5.07141 ( rapid move to begin. )
F250.00000
G01 Z-0.08000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
F500.00000
X45.99940 Y-5.07141
X45.99940 Y-45.91461
X45.92320 Y-45.99081
X4.85140 Y-45.99081
X4.77520 Y-45.91461
X4.77520 Y-4.84281
X4.85140 Y-4.76661
X45.92320 Y-4.76661
X45.99940 Y-4.84281
X45.99940 Y-5.07141

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z20.00000 ( retract )

M5 ( Spindle off. )
M9 ( Coolant off. )
M2 ( Program end. )

gistfile1.txt

# Based on http://reprap.org/wiki/PCB_Milling#Quickstart_2
# this is an example config file for pcb2gcode.
# place this in the same directory as your gerber files to save typing

# You may want to uncomment and change those in local project files
#front=JTAG-B_Cu.gbl
#back=Gen7Board.back.gbr
#drill=Gen7Board.plated-drill.cnc
#outline=contour.back.gbr

# Specify all parameters in mm, gcode output is unchanged
metric=1
metricoutput=1  # Output g-code in mm

# parameters for isolation routing / engraving / etching
zwork=-0.08     # milling depth in mm
zsafe=2         # safety height for rapid moves
zchange=20      # tool changing height
mill-feed=500   # mm/min, horizontal speed while milling
mill-speed=0    # Spindle rpm, unused

# Half tool width
offset=0.3      # Distance to trace: radius of drilling bit 
# generate voronoi regions
#offset=100

# Outline Gerber files have an outline around the board instead of an area
fill-outline=1
outline-width=1 # Not sure what this does exactly

# parameters for cutting out boards
cutter-diameter=1
zcut=-1.7               # board is around 1.5mm
cut-feed=200            # mm/min, horizontal speed while cutting
cut-speed=0             # Spindle rpm, unused

# Maximum depth to cut in a single pass (if this is less than zcut,
# multiple passes will be done).
cut-infeed=2

# drilling parameters
zdrill=-2       # Drill depth
drill-feed=500  # mm/min, vertical speed while drilling
drill-speed=0   # Spindle rpm, unused
drill-front=0   # Drill through the back of the board

# Do not use g81, Grbl does not support it
nog81=1

# For png output?
dpi=1000

# Bridges are gaps in the outline to prevent the PCB from becoming completely
# loose while cutting the board.

bridges=3       # Width of each bridge
bridgesnum=2    # Number of bridges (increase for bigger boards)
zbridges=-1.0   # Still cut off 1mm (leaving about 0.5mm) off the bridges, making them easier to break out
optimise=1

noname.kicad_pcb

(kicad_pcb (version 4) (host pcbnew 4.0.0-rc1-stable)

  (general
    (links 0)
    (no_connects 0)
    (area -2.5 74.604999 178.125002 222.575002)
    (thickness 1.6)
    (drawings 5)
    (tracks 3)
    (zones 0)
    (modules 1)
    (nets 2)
  )

  (page A4)
  (layers
    (0 F.Cu signal)
    (31 B.Cu signal)
    (32 B.Adhes user)
    (33 F.Adhes user)
    (34 B.Paste user)
    (35 F.Paste user)
    (36 B.SilkS user)
    (37 F.SilkS user)
    (38 B.Mask user)
    (39 F.Mask user)
    (40 Dwgs.User user)
    (41 Cmts.User user)
    (42 Eco1.User user)
    (43 Eco2.User user)
    (44 Edge.Cuts user)
    (45 Margin user)
    (46 B.CrtYd user)
    (47 F.CrtYd user)
    (48 B.Fab user)
    (49 F.Fab user)
  )

  (setup
    (last_trace_width 0.25)
    (trace_clearance 0.2)
    (zone_clearance 0.508)
    (zone_45_only no)
    (trace_min 0.2)
    (segment_width 0.2)
    (edge_width 0.15)
    (via_size 0.6)
    (via_drill 0.4)
    (via_min_size 0.4)
    (via_min_drill 0.3)
    (uvia_size 0.3)
    (uvia_drill 0.1)
    (uvias_allowed no)
    (uvia_min_size 0.2)
    (uvia_min_drill 0.1)
    (pcb_text_width 0.3)
    (pcb_text_size 1.5 1.5)
    (mod_edge_width 0.15)
    (mod_text_size 1 1)
    (mod_text_width 0.15)
    (pad_size 2.2352 2.2352)
    (pad_drill 1.016)
    (pad_to_mask_clearance 0.2)
    (aux_axis_origin 0 0)
    (visible_elements FFFFFF7F)
    (pcbplotparams
      (layerselection 0x00000_00000001)
      (usegerberextensions false)
      (excludeedgelayer true)
      (linewidth 0.150000)
      (plotframeref false)
      (viasonmask false)
      (mode 1)
      (useauxorigin true)
      (hpglpennumber 1)
      (hpglpenspeed 20)
      (hpglpendiameter 15)
      (hpglpenoverlay 2)
      (psnegative false)
      (psa4output false)
      (plotreference true)
      (plotvalue true)
      (plotinvisibletext false)
      (padsonsilk false)
      (subtractmaskfromsilk false)
      (outputformat 1)
      (mirror false)
      (drillshape 0)
      (scaleselection 1)
      (outputdirectory ""))
  )

  (net 0 "")
  (net 1 GND)

  (net_class Default "This is the default net class."
    (clearance 0.2)
    (trace_width 0.25)
    (via_dia 0.6)
    (via_drill 0.4)
    (uvia_dia 0.3)
    (uvia_drill 0.1)
  )

  (module Pin_Headers:Pin_Header_Straight_1x01 (layer F.Cu) (tedit 5639DA0C) (tstamp 5639D94E)
    (at 25.4 25.4)
    (descr "Through hole pin header")
    (tags "pin header")
    (path /5639D8BD)
    (fp_text reference P1 (at 0 -5.1) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value CONN_01X01 (at 0 -3.1) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.55 -1.55) (end 1.55 0) (layer F.SilkS) (width 0.15))
    (fp_line (start -1.75 -1.75) (end -1.75 1.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.75 -1.75) (end 1.75 1.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.75 -1.75) (end 1.75 -1.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.75 1.75) (end 1.75 1.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.55 0) (end -1.55 -1.55) (layer F.SilkS) (width 0.15))
    (fp_line (start -1.55 -1.55) (end 1.55 -1.55) (layer F.SilkS) (width 0.15))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.SilkS) (width 0.15))
    (pad 1 thru_hole rect (at 0 0) (size 2.2352 2.2352) (drill 1.016) (layers *.Cu *.Mask F.SilkS)
      (net 1 GND))
    (model Pin_Headers.3dshapes/Pin_Header_Straight_1x01.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 90))
    )
  )

  (target plus (at 0 0) (size 5) (width 0.15) (layer Edge.Cuts))
  (gr_line (start 50.8 0) (end 0 0) (layer Dwgs.User) (width 0.2))
  (gr_line (start 50.8 50.8) (end 50.8 0) (layer Dwgs.User) (width 0.2))
  (gr_line (start 0 50.8) (end 50.8 50.8) (layer Dwgs.User) (width 0.2))
  (gr_line (start 0 0) (end 0 50.8) (layer Dwgs.User) (width 0.2))

  (segment (start 177.8 139.7) (end 177.8 74.93) (width 0.25) (layer Dwgs.User) (net 0))
  (segment (start 111.76 139.7) (end 177.8 139.7) (width 0.25) (layer Dwgs.User) (net 0))
  (segment (start 10.16 0) (end 10.16 63.5) (width 0.25) (layer Dwgs.User) (net 0))

  (zone (net 1) (net_name GND) (layer F.Cu) (tstamp 0) (hatch edge 0.508)
    (connect_pads (clearance 0.508))
    (min_thickness 0.254)
    (fill yes (arc_segments 16) (thermal_gap 0.508) (thermal_bridge_width 0.508))
    (polygon
      (pts
        (xy 45.72 5.08) (xy 45.72 45.72) (xy 5.08 45.711413) (xy 5.08 5.071413)
      )
    )
    (filled_polygon
      (pts
        (xy 45.593 5.206973) (xy 45.593 45.592973) (xy 5.207 45.58444) (xy 5.207 25.68575) (xy 23.6474 25.68575)
        (xy 23.6474 26.64391) (xy 23.744073 26.877299) (xy 23.922702 27.055927) (xy 24.156091 27.1526) (xy 25.11425 27.1526)
        (xy 25.273 26.99385) (xy 25.273 25.527) (xy 25.527 25.527) (xy 25.527 26.99385) (xy 25.68575 27.1526)
        (xy 26.643909 27.1526) (xy 26.877298 27.055927) (xy 27.055927 26.877299) (xy 27.1526 26.64391) (xy 27.1526 25.68575)
        (xy 26.99385 25.527) (xy 25.527 25.527) (xy 25.273 25.527) (xy 23.80615 25.527) (xy 23.6474 25.68575)
        (xy 5.207 25.68575) (xy 5.207 24.15609) (xy 23.6474 24.15609) (xy 23.6474 25.11425) (xy 23.80615 25.273)
        (xy 25.273 25.273) (xy 25.273 23.80615) (xy 25.527 23.80615) (xy 25.527 25.273) (xy 26.99385 25.273)
        (xy 27.1526 25.11425) (xy 27.1526 24.15609) (xy 27.055927 23.922701) (xy 26.877298 23.744073) (xy 26.643909 23.6474)
        (xy 25.68575 23.6474) (xy 25.527 23.80615) (xy 25.273 23.80615) (xy 25.11425 23.6474) (xy 24.156091 23.6474)
        (xy 23.922702 23.744073) (xy 23.744073 23.922701) (xy 23.6474 24.15609) (xy 5.207 24.15609) (xy 5.207 5.19844)
      )
    )
  )
)

polygons.gbr

G04 #@! TF.FileFunction,Copper,L1,Top,Signal*
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 4.0.0-rc1-stable) date Wed 04 Nov 2015 11:27:31 AM CET*
%MOMM*%
G01*
G04 APERTURE LIST*
%ADD10C,0.150000*%
%ADD11R,2.235200X2.235200*%
%ADD12C,0.254000*%
G04 APERTURE END LIST*
D10*
D11*
X25400000Y-25400000D03*
D12*
G36*
X45593000Y-5206973D02*
X45593000Y-45592973D01*
X5207000Y-45584440D01*
X5207000Y-25685750D01*
X23647400Y-25685750D01*
X23647400Y-26643910D01*
X23744073Y-26877299D01*
X23922702Y-27055927D01*
X24156091Y-27152600D01*
X25114250Y-27152600D01*
X25273000Y-26993850D01*
X25273000Y-25527000D01*
X25527000Y-25527000D01*
X25527000Y-26993850D01*
X25685750Y-27152600D01*
X26643909Y-27152600D01*
X26877298Y-27055927D01*
X27055927Y-26877299D01*
X27152600Y-26643910D01*
X27152600Y-25685750D01*
X26993850Y-25527000D01*
X25527000Y-25527000D01*
X25273000Y-25527000D01*
X23806150Y-25527000D01*
X23647400Y-25685750D01*
X5207000Y-25685750D01*
X5207000Y-24156090D01*
X23647400Y-24156090D01*
X23647400Y-25114250D01*
X23806150Y-25273000D01*
X25273000Y-25273000D01*
X25273000Y-23806150D01*
X25527000Y-23806150D01*
X25527000Y-25273000D01*
X26993850Y-25273000D01*
X27152600Y-25114250D01*
X27152600Y-24156090D01*
X27055927Y-23922701D01*
X26877298Y-23744073D01*
X26643909Y-23647400D01*
X25685750Y-23647400D01*
X25527000Y-23806150D01*
X25273000Y-23806150D01*
X25114250Y-23647400D01*
X24156091Y-23647400D01*
X23922702Y-23744073D01*
X23744073Y-23922701D01*
X23647400Y-24156090D01*
X5207000Y-24156090D01*
X5207000Y-5198440D01*
X45593000Y-5206973D01*
X45593000Y-5206973D01*
G37*
X45593000Y-5206973D02*
X45593000Y-45592973D01*
X5207000Y-45584440D01*
X5207000Y-25685750D01*
X23647400Y-25685750D01*
X23647400Y-26643910D01*
X23744073Y-26877299D01*
X23922702Y-27055927D01*
X24156091Y-27152600D01*
X25114250Y-27152600D01*
X25273000Y-26993850D01*
X25273000Y-25527000D01*
X25527000Y-25527000D01*
X25527000Y-26993850D01*
X25685750Y-27152600D01*
X26643909Y-27152600D01*
X26877298Y-27055927D01*
X27055927Y-26877299D01*
X27152600Y-26643910D01*
X27152600Y-25685750D01*
X26993850Y-25527000D01*
X25527000Y-25527000D01*
X25273000Y-25527000D01*
X23806150Y-25527000D01*
X23647400Y-25685750D01*
X5207000Y-25685750D01*
X5207000Y-24156090D01*
X23647400Y-24156090D01*
X23647400Y-25114250D01*
X23806150Y-25273000D01*
X25273000Y-25273000D01*
X25273000Y-23806150D01*
X25527000Y-23806150D01*
X25527000Y-25273000D01*
X26993850Y-25273000D01*
X27152600Y-25114250D01*
X27152600Y-24156090D01*
X27055927Y-23922701D01*
X26877298Y-23744073D01*
X26643909Y-23647400D01*
X25685750Y-23647400D01*
X25527000Y-23806150D01*
X25273000Y-23806150D01*
X25114250Y-23647400D01*
X24156091Y-23647400D01*
X23922702Y-23744073D01*
X23744073Y-23922701D01*
X23647400Y-24156090D01*
X5207000Y-24156090D01*
X5207000Y-5198440D01*
X45593000Y-5206973D01*
M02*

segments.gbr

G04 #@! TF.FileFunction,Copper,L1,Top,Signal*
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 4.0.0-rc1-stable) date Wed 04 Nov 2015 11:26:43 AM CET*
%MOMM*%
G01*
G04 APERTURE LIST*
%ADD10C,0.150000*%
%ADD11R,2.235200X2.235200*%
%ADD12C,0.254000*%
G04 APERTURE END LIST*
D10*
D11*
X25400000Y-25400000D03*
D12*
X5207000Y-5198440D02*
X5207000Y-5198440D01*
X5207000Y-5401640D02*
X45593000Y-5401640D01*
X5207000Y-5604840D02*
X45593000Y-5604840D01*
X5207000Y-5808040D02*
X45593000Y-5808040D01*
X5207000Y-6011240D02*
X45593000Y-6011240D01*
X5207000Y-6214440D02*
X45593000Y-6214440D01*
X5207000Y-6417640D02*
X45593000Y-6417640D01*
X5207000Y-6620840D02*
X45593000Y-6620840D01*
X5207000Y-6824040D02*
X45593000Y-6824040D01*
X5207000Y-7027240D02*
X45593000Y-7027240D01*
X5207000Y-7230440D02*
X45593000Y-7230440D01*
X5207000Y-7433640D02*
X45593000Y-7433640D01*
X5207000Y-7636840D02*
X45593000Y-7636840D01*
X5207000Y-7840040D02*
X45593000Y-7840040D01*
X5207000Y-8043240D02*
X45593000Y-8043240D01*
X5207000Y-8246440D02*
X45593000Y-8246440D01*
X5207000Y-8449640D02*
X45593000Y-8449640D01*
X5207000Y-8652840D02*
X45593000Y-8652840D01*
X5207000Y-8856040D02*
X45593000Y-8856040D01*
X5207000Y-9059240D02*
X45593000Y-9059240D01*
X5207000Y-9262440D02*
X45593000Y-9262440D01*
X5207000Y-9465640D02*
X45593000Y-9465640D01*
X5207000Y-9668840D02*
X45593000Y-9668840D01*
X5207000Y-9872040D02*
X45593000Y-9872040D01*
X5207000Y-10075240D02*
X45593000Y-10075240D01*
X5207000Y-10278440D02*
X45593000Y-10278440D01*
X5207000Y-10481640D02*
X45593000Y-10481640D01*
X5207000Y-10684840D02*
X45593000Y-10684840D01*
X5207000Y-10888040D02*
X45593000Y-10888040D01*
X5207000Y-11091240D02*
X45593000Y-11091240D01*
X5207000Y-11294440D02*
X45593000Y-11294440D01*
X5207000Y-11497640D02*
X45593000Y-11497640D01*
X5207000Y-11700840D02*
X45593000Y-11700840D01*
X5207000Y-11904040D02*
X45593000Y-11904040D01*
X5207000Y-12107240D02*
X45593000Y-12107240D01*
X5207000Y-12310440D02*
X45593000Y-12310440D01*
X5207000Y-12513640D02*
X45593000Y-12513640D01*
X5207000Y-12716840D02*
X45593000Y-12716840D01*
X5207000Y-12920040D02*
X45593000Y-12920040D01*
X5207000Y-13123240D02*
X45593000Y-13123240D01*
X5207000Y-13326440D02*
X45593000Y-13326440D01*
X5207000Y-13529640D02*
X45593000Y-13529640D01*
X5207000Y-13732840D02*
X45593000Y-13732840D01*
X5207000Y-13936040D02*
X45593000Y-13936040D01*
X5207000Y-14139240D02*
X45593000Y-14139240D01*
X5207000Y-14342440D02*
X45593000Y-14342440D01*
X5207000Y-14545640D02*
X45593000Y-14545640D01*
X5207000Y-14748840D02*
X45593000Y-14748840D01*
X5207000Y-14952040D02*
X45593000Y-14952040D01*
X5207000Y-15155240D02*
X45593000Y-15155240D01*
X5207000Y-15358440D02*
X45593000Y-15358440D01*
X5207000Y-15561640D02*
X45593000Y-15561640D01*
X5207000Y-15764840D02*
X45593000Y-15764840D01*
X5207000Y-15968040D02*
X45593000Y-15968040D01*
X5207000Y-16171240D02*
X45593000Y-16171240D01*
X5207000Y-16374440D02*
X45593000Y-16374440D01*
X5207000Y-16577640D02*
X45593000Y-16577640D01*
X5207000Y-16780840D02*
X45593000Y-16780840D01*
X5207000Y-16984040D02*
X45593000Y-16984040D01*
X5207000Y-17187240D02*
X45593000Y-17187240D01*
X5207000Y-17390440D02*
X45593000Y-17390440D01*
X5207000Y-17593640D02*
X45593000Y-17593640D01*
X5207000Y-17796840D02*
X45593000Y-17796840D01*
X5207000Y-18000040D02*
X45593000Y-18000040D01*
X5207000Y-18203240D02*
X45593000Y-18203240D01*
X5207000Y-18406440D02*
X45593000Y-18406440D01*
X5207000Y-18609640D02*
X45593000Y-18609640D01*
X5207000Y-18812840D02*
X45593000Y-18812840D01*
X5207000Y-19016040D02*
X45593000Y-19016040D01*
X5207000Y-19219240D02*
X45593000Y-19219240D01*
X5207000Y-19422440D02*
X45593000Y-19422440D01*
X5207000Y-19625640D02*
X45593000Y-19625640D01*
X5207000Y-19828840D02*
X45593000Y-19828840D01*
X5207000Y-20032040D02*
X45593000Y-20032040D01*
X5207000Y-20235240D02*
X45593000Y-20235240D01*
X5207000Y-20438440D02*
X45593000Y-20438440D01*
X5207000Y-20641640D02*
X45593000Y-20641640D01*
X5207000Y-20844840D02*
X45593000Y-20844840D01*
X5207000Y-21048040D02*
X45593000Y-21048040D01*
X5207000Y-21251240D02*
X45593000Y-21251240D01*
X5207000Y-21454440D02*
X45593000Y-21454440D01*
X5207000Y-21657640D02*
X45593000Y-21657640D01*
X5207000Y-21860840D02*
X45593000Y-21860840D01*
X5207000Y-22064040D02*
X45593000Y-22064040D01*
X5207000Y-22267240D02*
X45593000Y-22267240D01*
X5207000Y-22470440D02*
X45593000Y-22470440D01*
X5207000Y-22673640D02*
X45593000Y-22673640D01*
X5207000Y-22876840D02*
X45593000Y-22876840D01*
X5207000Y-23080040D02*
X45593000Y-23080040D01*
X5207000Y-23283240D02*
X45593000Y-23283240D01*
X5207000Y-23486440D02*
X45593000Y-23486440D01*
X5207000Y-23689640D02*
X24054115Y-23689640D01*
X25156490Y-23689640D02*
X25643510Y-23689640D01*
X26745886Y-23689640D02*
X45593000Y-23689640D01*
X5207000Y-23892840D02*
X23773935Y-23892840D01*
X25273000Y-23892840D02*
X25527000Y-23892840D01*
X27026066Y-23892840D02*
X45593000Y-23892840D01*
X5207000Y-24096040D02*
X23672274Y-24096040D01*
X25273000Y-24096040D02*
X25527000Y-24096040D01*
X27127727Y-24096040D02*
X45593000Y-24096040D01*
X5207000Y-24299240D02*
X23647400Y-24299240D01*
X25273000Y-24299240D02*
X25527000Y-24299240D01*
X27152600Y-24299240D02*
X45593000Y-24299240D01*
X5207000Y-24502440D02*
X23647400Y-24502440D01*
X25273000Y-24502440D02*
X25527000Y-24502440D01*
X27152600Y-24502440D02*
X45593000Y-24502440D01*
X5207000Y-24705640D02*
X23647400Y-24705640D01*
X25273000Y-24705640D02*
X25527000Y-24705640D01*
X27152600Y-24705640D02*
X45593000Y-24705640D01*
X5207000Y-24908840D02*
X23647400Y-24908840D01*
X25273000Y-24908840D02*
X25527000Y-24908840D01*
X27152600Y-24908840D02*
X45593000Y-24908840D01*
X5207000Y-25112040D02*
X23647400Y-25112040D01*
X25273000Y-25112040D02*
X25527000Y-25112040D01*
X27152600Y-25112040D02*
X45593000Y-25112040D01*
X5207000Y-25315240D02*
X45593000Y-25315240D01*
X5207000Y-25518440D02*
X45593000Y-25518440D01*
X5207000Y-25721640D02*
X23647400Y-25721640D01*
X25273000Y-25721640D02*
X25527000Y-25721640D01*
X27152600Y-25721640D02*
X45593000Y-25721640D01*
X5207000Y-25924840D02*
X23647400Y-25924840D01*
X25273000Y-25924840D02*
X25527000Y-25924840D01*
X27152600Y-25924840D02*
X45593000Y-25924840D01*
X5207000Y-26128040D02*
X23647400Y-26128040D01*
X25273000Y-26128040D02*
X25527000Y-26128040D01*
X27152600Y-26128040D02*
X45593000Y-26128040D01*
X5207000Y-26331240D02*
X23647400Y-26331240D01*
X25273000Y-26331240D02*
X25527000Y-26331240D01*
X27152600Y-26331240D02*
X45593000Y-26331240D01*
X5207000Y-26534440D02*
X23647400Y-26534440D01*
X25273000Y-26534440D02*
X25527000Y-26534440D01*
X27152600Y-26534440D02*
X45593000Y-26534440D01*
X5207000Y-26737640D02*
X23686224Y-26737640D01*
X25273000Y-26737640D02*
X25527000Y-26737640D01*
X27113775Y-26737640D02*
X45593000Y-26737640D01*
X5207000Y-26940840D02*
X23807614Y-26940840D01*
X25273000Y-26940840D02*
X25527000Y-26940840D01*
X26992385Y-26940840D02*
X45593000Y-26940840D01*
X5207000Y-27144040D02*
X24135425Y-27144040D01*
X25122810Y-27144040D02*
X25677190Y-27144040D01*
X26664574Y-27144040D02*
X45593000Y-27144040D01*
X5207000Y-27347240D02*
X45593000Y-27347240D01*
X5207000Y-27550440D02*
X45593000Y-27550440D01*
X5207000Y-27753640D02*
X45593000Y-27753640D01*
X5207000Y-27956840D02*
X45593000Y-27956840D01*
X5207000Y-28160040D02*
X45593000Y-28160040D01*
X5207000Y-28363240D02*
X45593000Y-28363240D01*
X5207000Y-28566440D02*
X45593000Y-28566440D01*
X5207000Y-28769640D02*
X45593000Y-28769640D01*
X5207000Y-28972840D02*
X45593000Y-28972840D01*
X5207000Y-29176040D02*
X45593000Y-29176040D01*
X5207000Y-29379240D02*
X45593000Y-29379240D01*
X5207000Y-29582440D02*
X45593000Y-29582440D01*
X5207000Y-29785640D02*
X45593000Y-29785640D01*
X5207000Y-29988840D02*
X45593000Y-29988840D01*
X5207000Y-30192040D02*
X45593000Y-30192040D01*
X5207000Y-30395240D02*
X45593000Y-30395240D01*
X5207000Y-30598440D02*
X45593000Y-30598440D01*
X5207000Y-30801640D02*
X45593000Y-30801640D01*
X5207000Y-31004840D02*
X45593000Y-31004840D01*
X5207000Y-31208040D02*
X45593000Y-31208040D01*
X5207000Y-31411240D02*
X45593000Y-31411240D01*
X5207000Y-31614440D02*
X45593000Y-31614440D01*
X5207000Y-31817640D02*
X45593000Y-31817640D01*
X5207000Y-32020840D02*
X45593000Y-32020840D01*
X5207000Y-32224040D02*
X45593000Y-32224040D01*
X5207000Y-32427240D02*
X45593000Y-32427240D01*
X5207000Y-32630440D02*
X45593000Y-32630440D01*
X5207000Y-32833640D02*
X45593000Y-32833640D01*
X5207000Y-33036840D02*
X45593000Y-33036840D01*
X5207000Y-33240040D02*
X45593000Y-33240040D01*
X5207000Y-33443240D02*
X45593000Y-33443240D01*
X5207000Y-33646440D02*
X45593000Y-33646440D01*
X5207000Y-33849640D02*
X45593000Y-33849640D01*
X5207000Y-34052840D02*
X45593000Y-34052840D01*
X5207000Y-34256040D02*
X45593000Y-34256040D01*
X5207000Y-34459240D02*
X45593000Y-34459240D01*
X5207000Y-34662440D02*
X45593000Y-34662440D01*
X5207000Y-34865640D02*
X45593000Y-34865640D01*
X5207000Y-35068840D02*
X45593000Y-35068840D01*
X5207000Y-35272040D02*
X45593000Y-35272040D01*
X5207000Y-35475240D02*
X45593000Y-35475240D01*
X5207000Y-35678440D02*
X45593000Y-35678440D01*
X5207000Y-35881640D02*
X45593000Y-35881640D01*
X5207000Y-36084840D02*
X45593000Y-36084840D01*
X5207000Y-36288040D02*
X45593000Y-36288040D01*
X5207000Y-36491240D02*
X45593000Y-36491240D01*
X5207000Y-36694440D02*
X45593000Y-36694440D01*
X5207000Y-36897640D02*
X45593000Y-36897640D01*
X5207000Y-37100840D02*
X45593000Y-37100840D01*
X5207000Y-37304040D02*
X45593000Y-37304040D01*
X5207000Y-37507240D02*
X45593000Y-37507240D01*
X5207000Y-37710440D02*
X45593000Y-37710440D01*
X5207000Y-37913640D02*
X45593000Y-37913640D01*
X5207000Y-38116840D02*
X45593000Y-38116840D01*
X5207000Y-38320040D02*
X45593000Y-38320040D01*
X5207000Y-38523240D02*
X45593000Y-38523240D01*
X5207000Y-38726440D02*
X45593000Y-38726440D01*
X5207000Y-38929640D02*
X45593000Y-38929640D01*
X5207000Y-39132840D02*
X45593000Y-39132840D01*
X5207000Y-39336040D02*
X45593000Y-39336040D01*
X5207000Y-39539240D02*
X45593000Y-39539240D01*
X5207000Y-39742440D02*
X45593000Y-39742440D01*
X5207000Y-39945640D02*
X45593000Y-39945640D01*
X5207000Y-40148840D02*
X45593000Y-40148840D01*
X5207000Y-40352040D02*
X45593000Y-40352040D01*
X5207000Y-40555240D02*
X45593000Y-40555240D01*
X5207000Y-40758440D02*
X45593000Y-40758440D01*
X5207000Y-40961640D02*
X45593000Y-40961640D01*
X5207000Y-41164840D02*
X45593000Y-41164840D01*
X5207000Y-41368040D02*
X45593000Y-41368040D01*
X5207000Y-41571240D02*
X45593000Y-41571240D01*
X5207000Y-41774440D02*
X45593000Y-41774440D01*
X5207000Y-41977640D02*
X45593000Y-41977640D01*
X5207000Y-42180840D02*
X45593000Y-42180840D01*
X5207000Y-42384040D02*
X45593000Y-42384040D01*
X5207000Y-42587240D02*
X45593000Y-42587240D01*
X5207000Y-42790440D02*
X45593000Y-42790440D01*
X5207000Y-42993640D02*
X45593000Y-42993640D01*
X5207000Y-43196840D02*
X45593000Y-43196840D01*
X5207000Y-43400040D02*
X45593000Y-43400040D01*
X5207000Y-43603240D02*
X45593000Y-43603240D01*
X5207000Y-43806440D02*
X45593000Y-43806440D01*
X5207000Y-44009640D02*
X45593000Y-44009640D01*
X5207000Y-44212840D02*
X45593000Y-44212840D01*
X5207000Y-44416040D02*
X45593000Y-44416040D01*
X5207000Y-44619240D02*
X45593000Y-44619240D01*
X5207000Y-44822440D02*
X45593000Y-44822440D01*
X5207000Y-45025640D02*
X45593000Y-45025640D01*
X5207000Y-45228840D02*
X45593000Y-45228840D01*
X5207000Y-45432040D02*
X45593000Y-45432040D01*
X45593000Y-5206973D02*
X45593000Y-45592973D01*
X5207000Y-45584440D01*
X5207000Y-25685750D01*
X23647400Y-25685750D01*
X23647400Y-26643910D01*
X23744073Y-26877299D01*
X23922702Y-27055927D01*
X24156091Y-27152600D01*
X25114250Y-27152600D01*
X25273000Y-26993850D01*
X25273000Y-25527000D01*
X25527000Y-25527000D01*
X25527000Y-26993850D01*
X25685750Y-27152600D01*
X26643909Y-27152600D01*
X26877298Y-27055927D01*
X27055927Y-26877299D01*
X27152600Y-26643910D01*
X27152600Y-25685750D01*
X26993850Y-25527000D01*
X25527000Y-25527000D01*
X25273000Y-25527000D01*
X23806150Y-25527000D01*
X23647400Y-25685750D01*
X5207000Y-25685750D01*
X5207000Y-24156090D01*
X23647400Y-24156090D01*
X23647400Y-25114250D01*
X23806150Y-25273000D01*
X25273000Y-25273000D01*
X25273000Y-23806150D01*
X25527000Y-23806150D01*
X25527000Y-25273000D01*
X26993850Y-25273000D01*
X27152600Y-25114250D01*
X27152600Y-24156090D01*
X27055927Y-23922701D01*
X26877298Y-23744073D01*
X26643909Y-23647400D01*
X25685750Y-23647400D01*
X25527000Y-23806150D01*
X25273000Y-23806150D01*
X25114250Y-23647400D01*
X24156091Y-23647400D01*
X23922702Y-23744073D01*
X23744073Y-23922701D01*
X23647400Y-24156090D01*
X5207000Y-24156090D01*
X5207000Y-5198440D01*
X45593000Y-5206973D01*
M02*