Skip to content

Instantly share code, notes, and snippets.

@maxp
Created May 24, 2009 13:54
Show Gist options
  • Save maxp/117103 to your computer and use it in GitHub Desktop.
Save maxp/117103 to your computer and use it in GitHub Desktop.
xorg.conf
#
# xorg.conf @ black
#
#Section "Device"
# Identifier "aticonfig-Device[0]"
# Driver "fglrx"
## Driver / Performance Options
# Option "XAANoOffscreenPixmaps" "true"
# Option "TexturedVideo" "On"
### Set to 1 - better , set to 2 for compability, and 0 for basic
# Option "UseFastTLS" "1"
### Experimental
# Option "Textured2D" "on"
# Option "TexturedXRender" "on"
# Option "BackingStore" "on"
### forced turned off so TextureVideo is used
# Option "VideoOverlay" "Off"
# Option "OpenGLOverlay" "Off"
### Desktop Setup
# Option "DesktopSetup" "clone"
# Option "EnableMonitor" "crt1,lvds"
# BusID "PCI:1:0:0"
# EndSection
Section "ServerLayout"
Identifier "BaseLayout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
Option "AllowEmptyInput" "no"
Option "AIGLX" "yes"
EndSection
Section "Files"
# FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
#
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "dbe"
Load "drm"
Load "xtrap"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "freetype"
# Load "type1"
EndSection
Section "ServerFlags"
Option "DontZap" "yes"
Option "DontZoom" "yes"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "AutoRepeat" "500" "30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/input/mice"
Option "Buttons" "7"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "L2000CN"
Option "VendorName" "LG"
Option "ModelName" "L2000CN"
Option "DPMS" "yes"
EndSection
Section "Device"
Identifier "ati"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "radeon"
Driver "radeon"
VendorName "ATI"
BusID "PCI:1:0:0"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
Option "ColorTiling" "yes"
Option "AccelMethod" "EXA"
Option "AGPFastWrite" "yes"
Option "EnablePageFlip" "yes"
Option "EXAVSync" "yes"
Option "DRI" "yes"
EndSection
Section "Screen"
Identifier "Screen0"
# Device "ati"
Device "radeon"
Monitor "L2000CN"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Module"
Load "evdev"
EndSection
Section "Extensions"
Option "Composite" "yes"
EndSection
#
# eof
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment