คอนฟิกสำหรับ TFT_eSPI ใช้กับบอร์ดจอ ATD3.2-S3 Lite

Setup1_ILI9341.h

// See SetupX_Template.h for all options available
#define USER_SETUP_ID 1

#define ILI9341_DRIVER

#define TFT_MISO 13 // (leave TFT SDO disconnected if other SPI devices share MISO)
#define TFT_MOSI 11
#define TFT_SCLK 12
#define TFT_CS   10  // Chip select control pin D8
#define TFT_DC   21  // Data Command control pin
#define TFT_RST  14  // Reset pin (could connect to NodeMCU RST, see next line)
//#define TFT_RST  -1    // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V


#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts


#define SMOOTH_FONT


// #define SPI_FREQUENCY  27000000
#define SPI_FREQUENCY  40000000
// #define SPI_FREQUENCY  80000000

#define SPI_READ_FREQUENCY  20000000

#define SPI_TOUCH_FREQUENCY  2500000


// #define SUPPORT_TRANSACTIONS