rc.local BASH notest

gistfile1.sh

#!/bin/sh
#
# /etc/rc.d/rc.local:  Local system initialization script.
#
# Put any local startup commands in here.  Also, if you have
# anything that needs to be run at shutdown time you can
# make an /etc/rc.d/rc.local_shutdown script and put those
# commands in there.
#
#
#
# TODO: check if there is not a clash between
#       some governors (powersave) and fiddling with
#       Processor cooling_device settings
#
# for d in `find /sys/class/thermal/cooling_device*`
# do
#     max=`cat $d/max_state`
#     echo $max > $d/cur_state
#     #echo $[ ${max} - 1 ] > $d/cur_state
# done

/usr/bin/cpufreq-set --max 1330000

# /usr/bin/cpufreq-set --governor conservative

# TODO: this needs proper fix, as it gets restarted and hogs
#       the CPU again.
# /usr/bin/pkill v86d

# ingo said no
# /sbin/sysctl vm.swappiness=10

# echo 5 > /proc/sys/vm/laptop_mode

# the wireless (ipw2200?) seems to need this
echo 120 > /sys/class/firmware/timeout

if [ -e "/sys/kernel/mm/ksm/run" ]
then
    /bin/echo 1 > /sys/kernel/mm/ksm/run
fi

if [ -e "/sys/class/net/eth1/device/power/wakeup" ]
then
    /bin/echo "enabled" > /sys/class/net/eth1/device/power/wakeup
    /usr/sbin/wpa_supplicant -B -Dwext -ieth1 -c /etc/wpa_supplicant.conf
    /sbin/dhcpcd -h `/bin/hostname` eth1
fi

if [ -e "/sys/class/net/wlan1" ]
then
    /usr/sbin/wpa_supplicant -B -Dwext -iwlan1 -c /etc/wpa_supplicant.conf
    /sbin/dhcpcd -h `/bin/hostname` wlan1
fi

# TODO: ttyUSB[0-9]
# make a script and udev rule
# - or should we use sysfs !!! <- most likely YES
#
if [ -e "/sys/bus/usb-serial/devices/ttyUSB0" ]
then
    /bin/echo "nameserver 127.0.0.1" >> /etc/resolv.conf
fi

# oversimplyfied ntpdate usage
/usr/sbin/ntpdate ntp.internode.on.net > /dev/null 2>&1

UNAME=`/bin/uname -r`
DATE=`/bin/date "+%Y-%m-%d-%H-%M-%S"`

# flush mem caches
#
sync; echo 3 > /proc/sys/vm/drop_caches

cp /proc/config.gz /var/log/$DATE-$UNAME-config.gz