Created
January 7, 2018 02:36
-
-
Save mcbridematt/02c4c6792269cf57beea9b0c5a782390 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot 2018.01-rc2 (Dec 22 2017 - 03:58:34 +0000) | |
| SoC: LS1043AE Rev1.1 (0x87920011) | |
| Clock Configuration: | |
| CPU0(A53):1600 MHz CPU1(A53):1600 MHz CPU2(A53):1600 MHz | |
| CPU3(A53):1600 MHz | |
| Bus: 400 MHz DDR: 1600 MT/s FMAN: 500 MHz | |
| Reset Configuration Word (RCW): | |
| 00000000: 08100010 0a000000 00000000 00000000 | |
| 00000010: 14550002 00804012 e0025000 c1002000 | |
| 00000020: 00000000 00000000 00000000 00038800 | |
| 00000030: 00000000 00001101 00000096 00000001 | |
| Model: Traverse LS1043V | |
| Board: LS1043V, booting from NAND | |
| I2C: ready | |
| DRAM: Detected UDIMM Fixed DDR on board | |
| done | |
| 1.9 GiB (DDR4, 32-bit, CL=11, ECC off) | |
| Using SERDES1 Protocol: 5205 (0x1455) | |
| SEC0: RNG instantiated | |
| PPA Firmware: Version LSDK-20170625 | |
| NAND: 512 MiB | |
| MMC: FSL_SDHC: 0 | |
| In: serial | |
| Out: serial | |
| Err: serial | |
| Net: Fman1: Uploading microcode version 108.4.5 | |
| Setting AR8035 output clock | |
| PCIe0: pcie@3400000 disabled | |
| PCIe1: pcie@3500000 Root Complex: x1 gen1 | |
| PCIe2: pcie@3600000 Root Complex: x1 gen2 | |
| FM1@DTSEC1, FM1@DTSEC2, FM1@DTSEC3 [PRIME], FM1@DTSEC4, FM1@DTSEC5, FM1@DTSEC6, FM1@TGEC1 | |
| Error: FM1@TGEC1 address not set. | |
| Hit any key to stop autoboot: 0 | |
| NAND read: device 0 offset 0x1c0000, size 0x20000 | |
| 131072 bytes read: OK | |
| MMC: no card present | |
| mmc_init: -123, time 1001 | |
| starting USB... | |
| USB0: Register 200017f NbrPorts 2 | |
| Starting the controller | |
| USB XHCI 1.00 | |
| USB1: Register 200017f NbrPorts 2 | |
| Starting the controller | |
| USB XHCI 1.00 | |
| USB2: Register 200017f NbrPorts 2 | |
| Starting the controller | |
| USB XHCI 1.00 | |
| scanning bus 0 for devices... 1 USB Device(s) found | |
| scanning bus 1 for devices... 1 USB Device(s) found | |
| scanning bus 2 for devices... 2 USB Device(s) found | |
| scanning usb for storage devices... 0 Storage Device(s) found | |
| Device 0: device type unknown | |
| ... is now current device | |
| ** Bad device usb 0 ** | |
| ** Bad device usb 0 ** | |
| ubi0: attaching mtd1 | |
| ubi0: scanning is finished | |
| ubi0: attached mtd1 (name "mtd=5", size 510 MiB) | |
| ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes | |
| ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 | |
| ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 | |
| ubi0: good PEBs: 4077, bad PEBs: 4, corrupted PEBs: 0 | |
| ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128 | |
| ubi0: max/mean erase counter: 19/13, WL threshold: 4096, image sequence number: 1086650986 | |
| ubi0: available PEBs: 1649, total reserved PEBs: 2428, PEBs reserved for bad PEB handling: 76 | |
| Read 0 bytes from volume kernel1 to a0000000 | |
| No size specified -> Using max size (8507392) | |
| ## Loading kernel from FIT Image at a0000000 ... | |
| Using 'config@1' configuration | |
| Trying 'kernel@1' kernel subimage | |
| Description: ARM64 OpenWrt Linux-4.9.72 | |
| Type: Kernel Image | |
| Compression: gzip compressed | |
| Data Start: 0xa00000e8 | |
| Data Size: 6991276 Bytes = 6.7 MiB | |
| Architecture: AArch64 | |
| OS: Linux | |
| Load Address: 0x80080000 | |
| Entry Point: 0x80080000 | |
| Hash algo: crc32 | |
| Hash value: 866b88f7 | |
| Hash algo: sha1 | |
| Hash value: 8143d0f14f3ea429033e45981a0818629fe5d4d2 | |
| Verifying Hash Integrity ... crc32+ sha1+ OK | |
| ## Loading fdt from FIT Image at a0000000 ... | |
| Using 'config@1' configuration | |
| Trying 'fdt@1' fdt subimage | |
| Description: ARM64 OpenWrt traverse-five64 device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0xa06aafd4 | |
| Data Size: 28997 Bytes = 28.3 KiB | |
| Architecture: AArch64 | |
| Load Address: 0x90000000 | |
| Hash algo: crc32 | |
| Hash value: e9517906 | |
| Hash algo: sha1 | |
| Hash value: 08bed4da82b640186ce7d0063701213630a31d17 | |
| Verifying Hash Integrity ... crc32+ sha1+ OK | |
| Loading fdt from 0xa06aafd4 to 0x90000000 | |
| Booting using the fdt blob at 0x90000000 | |
| Uncompressing Kernel Image ... OK | |
| Using Device Tree in place at 0000000090000000, end 000000009001a144 | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0 | |
| [ 0.000000] Linux version 4.9.72 (matt@development) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r5440+229-9e356ad6e0) ) #0 SMP PREEMPT Mon Jan 1 23:12:03 2018 | |
| [ 0.000000] Boot CPU: AArch64 Processor [410fd034] | |
| [ 0.000000] earlycon: uart8250 at MMIO 0x00000000021c0500 (options '') | |
| [ 0.000000] bootconsole [uart8250] enabled | |
| [ 0.000000] efi: Getting EFI parameters from FDT: | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd | |
| [ 0.000000] OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr | |
| [ 0.000000] OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr | |
| [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000fbdfffff] | |
| [ 0.000000] NUMA: Adding memblock [0x80000000 - 0xf7ffffff] on node 0 | |
| [ 0.000000] NUMA: Adding memblock [0xfb000000 - 0xfb7fffff] on node 0 | |
| [ 0.000000] NUMA: Adding memblock [0xfbc00000 - 0xfbdfffff] on node 0 | |
| [ 0.000000] NUMA: Initmem setup node 0 [mem 0x80000000-0xfbdfffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0xfbdcc280-0xfbdcda3f] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000fbdfffff] | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000f7ffffff] | |
| [ 0.000000] node 0: [mem 0x00000000fb000000-0x00000000fb7fffff] | |
| [ 0.000000] node 0: [mem 0x00000000fbc00000-0x00000000fbdfffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000fbdfffff] | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv0.2 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] percpu: Embedded 22 pages/cpu @ffff80007bd6f000 s52952 r8192 d28968 u90112 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 | |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 486152 | |
| [ 0.000000] Policy zone: DMA | |
| [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio,0x21c0500 root=ubi0:rootfs1 rootfstype=ubifs rootwait mtdparts=7e800000.flash:1m(nand_uboot),384k(nand_uboot_env),128k(fman_fw),256k(ppa),128k(dtb),-(nandubi) ubi.mtd=nandubi | |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.000000] Memory: 1910272K/1976320K available (10556K kernel code, 626K rwdata, 3336K rodata, 704K init, 927K bss, 49664K reserved, 16384K cma-reserved) | |
| [ 0.000000] Virtual kernel memory layout: | |
| [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) | |
| [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB) | |
| [ 0.000000] .text : 0xffff000008080000 - 0xffff000008ad0000 ( 10560 KB) | |
| [ 0.000000] .rodata : 0xffff000008ad0000 - 0xffff000008e20000 ( 3392 KB) | |
| [ 0.000000] .init : 0xffff000008e20000 - 0xffff000008ed0000 ( 704 KB) | |
| [ 0.000000] .data : 0xffff000008ed0000 - 0xffff000008f6ca00 ( 627 KB) | |
| [ 0.000000] .bss : 0xffff000008f6ca00 - 0xffff0000090546cc ( 928 KB) | |
| [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB) | |
| [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB) | |
| [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum) | |
| [ 0.000000] 0xffff7e0000000000 - 0xffff7e0001ef8000 ( 30 MB actual) | |
| [ 0.000000] memory : 0xffff800000000000 - 0xffff80007be00000 ( 1982 MB) | |
| [ 0.000000] Preemptible hierarchical RCU implementation. | |
| [ 0.000000] Build-time adjustment of leaf fanout to 64. | |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. | |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 | |
| [ 0.000000] NR_IRQS:64 nr_irqs:64 0 | |
| [ 0.000000] GIC: Adjusting CPU interface base to 0x000000000142f000 | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] arm_arch_timer: Enabling workaround for FSL erratum A-008585 | |
| [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 25.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns | |
| [ 0.000002] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns | |
| [ 0.008378] Console: colour dummy device 80x25 | |
| [ 0.012873] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000) | |
| [ 0.023278] pid_max: default: 32768 minimum: 301 | |
| [ 0.027987] Security Framework initialized | |
| [ 0.032414] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| [ 0.040561] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
| [ 0.048068] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.054808] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.062533] ASID allocator initialised with 65536 entries | |
| [ 0.100138] EFI services will not be available. | |
| [ 0.144801] Detected VIPT I-cache on CPU1 | |
| [ 0.144826] CPU1: Booted secondary processor [410fd034] | |
| [ 0.176826] Detected VIPT I-cache on CPU2 | |
| [ 0.176841] CPU2: Booted secondary processor [410fd034] | |
| [ 0.208873] Detected VIPT I-cache on CPU3 | |
| [ 0.208888] CPU3: Booted secondary processor [410fd034] | |
| [ 0.208921] Brought up 4 CPUs | |
| [ 0.239699] SMP: Total of 4 processors activated. | |
| [ 0.244424] CPU features: detected feature: 32-bit EL0 Support | |
| [ 0.250306] CPU: All CPU(s) started at EL2 | |
| [ 0.254426] alternatives: patching kernel code | |
| [ 0.263194] DMI not present or invalid. | |
| [ 0.267171] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.276981] futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| [ 0.283583] xor: measuring software checksum speed | |
| [ 0.328423] 8regs : 3168.000 MB/sec | |
| [ 0.372648] 8regs_prefetch: 2814.000 MB/sec | |
| [ 0.417221] 32regs : 3510.000 MB/sec | |
| [ 0.461444] 32regs_prefetch: 3171.000 MB/sec | |
| [ 0.466080] xor: using function: 32regs (3510.000 MB/sec) | |
| [ 0.472124] NET: Registered protocol family 16 | |
| [ 0.496609] cpuidle: using governor menu | |
| [ 0.500885] Bman ver:0a02,02,01 | |
| [ 0.505439] qman-fqd addr 0x00000000fb800000 size 0x400000 | |
| [ 0.510950] qman-pfdr addr 0x00000000f8000000 size 0x2000000 | |
| [ 0.516638] Qman ver:0a01,03,02,00 | |
| [ 0.520169] vdso: 2 pages (1 code @ ffff000008ad6000, 1 data @ ffff000008ed5000) | |
| [ 0.528015] DMA: preallocated 256 KiB pool for atomic allocations | |
| [ 0.534218] Serial: AMBA PL011 UART driver | |
| [ 0.539140] Machine: Traverse LS1043V | |
| [ 0.542818] SoC family: QorIQ LS1043A | |
| [ 0.546490] SoC ID: svr:0x87920011, Revision: 1.1 | |
| [ 0.583489] HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
| [ 0.655323] raid6: int64x1 gen() 511 MB/s | |
| [ 0.727354] raid6: int64x1 xor() 420 MB/s | |
| [ 0.799438] raid6: int64x2 gen() 806 MB/s | |
| [ 0.871433] raid6: int64x2 xor() 653 MB/s | |
| [ 0.943465] raid6: int64x4 gen() 1228 MB/s | |
| [ 1.015521] raid6: int64x4 xor() 859 MB/s | |
| [ 1.087551] raid6: int64x8 gen() 1497 MB/s | |
| [ 1.159602] raid6: int64x8 xor() 962 MB/s | |
| [ 1.231678] raid6: neonx1 gen() 926 MB/s | |
| [ 1.303683] raid6: neonx1 xor() 769 MB/s | |
| [ 1.375728] raid6: neonx2 gen() 1555 MB/s | |
| [ 1.447739] raid6: neonx2 xor() 1283 MB/s | |
| [ 1.519780] raid6: neonx4 gen() 2102 MB/s | |
| [ 1.591808] raid6: neonx4 xor() 1462 MB/s | |
| [ 1.663849] raid6: neonx8 gen() 2092 MB/s | |
| [ 1.735895] raid6: neonx8 xor() 1507 MB/s | |
| [ 1.740182] raid6: using algorithm neonx4 gen() 2102 MB/s | |
| [ 1.745603] raid6: .... xor() 1462 MB/s, rmw enabled | |
| [ 1.750587] raid6: using intx1 recovery algorithm | |
| [ 1.755396] ACPI: Interpreter disabled. | |
| [ 1.761092] RCPM: layerscape_rcpm_init: Can't find the RCPM node. | |
| [ 1.767718] vgaarb: loaded | |
| [ 1.770595] SCSI subsystem initialized | |
| [ 1.774630] usbcore: registered new interface driver usbfs | |
| [ 1.780173] usbcore: registered new interface driver hub | |
| [ 1.785546] usbcore: registered new device driver usb | |
| [ 1.790892] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported | |
| [ 1.798344] 0-0020 supply vcc not found, using dummy regulator | |
| [ 1.816579] i2c i2c-0: IMX I2C adapter registered | |
| [ 1.821340] i2c i2c-0: using dma0chan16 (tx) and dma0chan17 (rx) for DMA transfers | |
| [ 1.829092] pps_core: LinuxPPS API ver. 1 registered | |
| [ 1.834081] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 1.843287] PTP clock support registered | |
| [ 1.847311] dmi: Firmware registration failed. | |
| [ 1.851796] bman-fbpr addr 0x00000000fa000000 size 0x1000000 | |
| [ 1.857508] Bman err interrupt handler present | |
| [ 1.862069] unknown BMan version in portal node,default to rev1.0 | |
| [ 1.868217] unknown BMan version in portal node,default to rev1.0 | |
| [ 1.874357] unknown BMan version in portal node,default to rev1.0 | |
| [ 1.880496] unknown BMan version in portal node,default to rev1.0 | |
| [ 1.886636] unknown BMan version in portal node,default to rev1.0 | |
| [ 1.892775] unknown BMan version in portal node,default to rev1.0 | |
| [ 1.898914] unknown BMan version in portal node,default to rev1.0 | |
| [ 1.905053] unknown BMan version in portal node,default to rev1.0 | |
| [ 1.911195] unknown BMan version in portal node,default to rev1.0 | |
| [ 1.917446] Bman portal initialised, cpu 0 | |
| [ 1.921632] Bman portal initialised, cpu 1 | |
| [ 1.925814] Bman portal initialised, cpu 2 | |
| [ 1.929999] Bman portal initialised, cpu 3 | |
| [ 1.934113] Bman portals initialised | |
| [ 1.938571] Qman err interrupt handler present | |
| [ 1.943034] Can't find Qman clock frequency | |
| [ 1.947425] QMan: Allocated lookup table at ffff000009901000, entry count 65537 | |
| [ 1.954788] unknown QMan version in portal node,default to rev1.1 | |
| [ 1.960914] Revision=0x0302, but portal '/soc/qman-portals@500000000/qman-portal@0' has 0x0101 | |
| [ 1.969574] unknown QMan version in portal node,default to rev1.1 | |
| [ 1.975696] Revision=0x0302, but portal '/soc/qman-portals@500000000/qman-portal@10000' has 0x0101 | |
| [ 1.984705] unknown QMan version in portal node,default to rev1.1 | |
| [ 1.990829] Revision=0x0302, but portal '/soc/qman-portals@500000000/qman-portal@20000' has 0x0101 | |
| [ 1.999838] unknown QMan version in portal node,default to rev1.1 | |
| [ 2.005960] Revision=0x0302, but portal '/soc/qman-portals@500000000/qman-portal@30000' has 0x0101 | |
| [ 2.014968] unknown QMan version in portal node,default to rev1.1 | |
| [ 2.021089] Revision=0x0302, but portal '/soc/qman-portals@500000000/qman-portal@40000' has 0x0101 | |
| [ 2.030098] unknown QMan version in portal node,default to rev1.1 | |
| [ 2.036219] Revision=0x0302, but portal '/soc/qman-portals@500000000/qman-portal@50000' has 0x0101 | |
| [ 2.045227] unknown QMan version in portal node,default to rev1.1 | |
| [ 2.051348] Revision=0x0302, but portal '/soc/qman-portals@500000000/qman-portal@60000' has 0x0101 | |
| [ 2.060357] unknown QMan version in portal node,default to rev1.1 | |
| [ 2.066478] Revision=0x0302, but portal '/soc/qman-portals@500000000/qman-portal@70000' has 0x0101 | |
| [ 2.075486] unknown QMan version in portal node,default to rev1.1 | |
| [ 2.081607] Revision=0x0302, but portal '/soc/qman-portals@500000000/qman-portal@80000' has 0x0101 | |
| [ 2.090953] Qman portal initialised, cpu 0 | |
| [ 2.095127] Qman portal initialised, cpu 1 | |
| [ 2.099305] Qman portal initialised, cpu 2 | |
| [ 2.103479] Qman portal initialised, cpu 3 | |
| [ 2.107593] Qman portals initialised | |
| [ 2.111234] Bman: BPID allocator includes range 32:32 | |
| [ 2.116353] Qman: FQID allocator includes range 256:256 | |
| [ 2.121603] Qman: FQID allocator includes range 32768:32768 | |
| [ 2.127243] Qman: CGRID allocator includes range 0:256 | |
| [ 2.132514] Qman: pool channel allocator includes range 1025:15 | |
| [ 2.138536] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree | |
| [ 2.144596] fsl-ifc 1530000.ifc: Freescale Integrated Flash Controller | |
| [ 2.151166] fsl-ifc 1530000.ifc: IFC version 1.4, 8 banks | |
| [ 2.156802] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 2.163406] clocksource: Switched to clocksource arch_sys_counter | |
| [ 2.169615] VFS: Disk quotas dquot_6.6.0 | |
| [ 2.173589] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 2.180623] pnp: PnP ACPI: disabled | |
| [ 2.187295] NET: Registered protocol family 2 | |
| [ 2.192017] TCP established hash table entries: 16384 (order: 5, 131072 bytes) | |
| [ 2.199408] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) | |
| [ 2.206246] TCP: Hash tables configured (established 16384 bind 16384) | |
| [ 2.212859] UDP hash table entries: 1024 (order: 3, 32768 bytes) | |
| [ 2.218933] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) | |
| [ 2.225508] NET: Registered protocol family 1 | |
| [ 2.230183] kvm [1]: 8-bit VMID | |
| [ 2.233340] kvm [1]: IDMAP page: 80ac3000 | |
| [ 2.237370] kvm [1]: HYP VA range: 800000000000:ffffffffffff | |
| [ 2.243507] kvm [1]: Hyp mode initialized successfully | |
| [ 2.248699] kvm [1]: vgic-v2@1440000 | |
| [ 2.252354] kvm [1]: vgic interrupt IRQ1 | |
| [ 2.256302] kvm [1]: virtual timer IRQ4 | |
| [ 2.261366] audit: initializing netlink subsys (disabled) | |
| [ 2.266821] audit: type=2000 audit(2.068:1): initialized | |
| [ 2.272177] No memory allocated for crashlog | |
| [ 2.276574] workingset: timestamp_bits=44 max_order=19 bucket_order=0 | |
| [ 2.283410] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 2.289286] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
| [ 2.299237] fuse init (API version 7.26) | |
| [ 2.303241] SGI XFS with security attributes, realtime, no debug enabled | |
| [ 2.311793] async_tx: api initialized (async) | |
| [ 2.316203] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) | |
| [ 2.323686] io scheduler noop registered | |
| [ 2.327636] io scheduler cfq registered (default) | |
| [ 2.333759] OF: PCI: host bridge /soc/pcie@3500000 ranges: | |
| [ 2.339283] OF: PCI: IO 0x4800010000..0x480001ffff -> 0x00000000 | |
| [ 2.345588] OF: PCI: MEM 0x4840000000..0x487fffffff -> 0x40000000 | |
| [ 2.352012] layerscape-pcie 3500000.pcie: PCI host bridge to bus 0000:00 | |
| [ 2.358754] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 2.364267] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] | |
| [ 2.370482] pci_bus 0000:00: root bus resource [mem 0x4840000000-0x487fffffff] (bus address [0x40000000-0x7fffffff]) | |
| [ 2.391458] pci 0000:00:00.0: BAR 14: assigned [mem 0x4840000000-0x48402fffff] | |
| [ 2.398723] pci 0000:00:00.0: BAR 6: assigned [mem 0x4840300000-0x48403007ff pref] | |
| [ 2.406337] pci 0000:01:00.0: BAR 0: assigned [mem 0x4840000000-0x48401fffff 64bit] | |
| [ 2.414073] pci 0000:01:00.0: BAR 6: assigned [mem 0x4840200000-0x484020ffff pref] | |
| [ 2.421683] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 2.426675] pci 0000:00:00.0: bridge window [mem 0x4840000000-0x48402fffff] | |
| [ 2.433995] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt | |
| [ 2.440996] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt | |
| [ 2.447688] OF: PCI: host bridge /soc/pcie@3600000 ranges: | |
| [ 2.453210] OF: PCI: IO 0x5000010000..0x500001ffff -> 0x00000000 | |
| [ 2.459511] OF: PCI: MEM 0x5040000000..0x507fffffff -> 0x40000000 | |
| [ 2.465905] layerscape-pcie 3600000.pcie: PCI host bridge to bus 0001:00 | |
| [ 2.472643] pci_bus 0001:00: root bus resource [bus 00-ff] | |
| [ 2.478159] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) | |
| [ 2.487166] pci_bus 0001:00: root bus resource [mem 0x5040000000-0x507fffffff] (bus address [0x40000000-0x7fffffff]) | |
| [ 2.507448] pci 0001:00:00.0: BAR 14: assigned [mem 0x5040000000-0x50400fffff] | |
| [ 2.514712] pci 0001:00:00.0: BAR 6: assigned [mem 0x5040100000-0x50401007ff pref] | |
| [ 2.522325] pci 0001:01:00.0: BAR 0: assigned [mem 0x5040000000-0x5040003fff 64bit] | |
| [ 2.530052] pci 0001:00:00.0: PCI bridge to [bus 01] | |
| [ 2.535041] pci 0001:00:00.0: bridge window [mem 0x5040000000-0x50400fffff] | |
| [ 2.542333] pcieport 0001:00:00.0: Signaling PME through PCIe PME interrupt | |
| [ 2.549331] pci 0001:01:00.0: Signaling PME through PCIe PME interrupt | |
| [ 2.557394] Freescale LS2 console driver | |
| [ 2.561382] fsl-ls2-console: device fsl_mc_console registered | |
| [ 2.567195] fsl-ls2-console: device fsl_aiop_console registered | |
| [ 2.573579] xenfs: not registering filesystem on non-xen platform | |
| [ 2.581303] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 2.588504] console [ttyS0] disabled | |
| [ 2.592125] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 35, base_baud = 25000000) is a 16550A | |
| [ 2.600977] console [ttyS0] enabled | |
| [ 2.600977] console [ttyS0] enabled | |
| [ 2.607962] bootconsole [uart8250] disabled | |
| [ 2.607962] bootconsole [uart8250] disabled | |
| [ 2.616519] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 35, base_baud = 25000000) is a 16550A | |
| [ 2.625474] 21d0500.serial: ttyS2 at MMIO 0x21d0500 (irq = 36, base_baud = 25000000) is a 16550A | |
| [ 2.634426] 21d0600.serial: ttyS3 at MMIO 0x21d0600 (irq = 36, base_baud = 25000000) is a 16550A | |
| [ 2.649278] brd: module loaded | |
| [ 2.655081] loop: module loaded | |
| [ 2.658529] hisi_sas: driver version v1.6 | |
| [ 2.663052] nvme nvme0: pci function 0001:01:00.0 | |
| [ 2.668433] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode | |
| [ 2.677391] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst | |
| [ 2.687445] scsi host0: ahci-qoriq | |
| [ 2.690974] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 47 | |
| [ 2.700572] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xac | |
| [ 2.706924] nand: Micron MT29F4G08ABBDAHC | |
| [ 2.710928] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 | |
| [ 2.718768] Bad block table found at page 262080, version 0x01 | |
| [ 2.725068] Bad block table found at page 262016, version 0x01 | |
| [ 2.731181] 6 cmdlinepart partitions found on MTD device 7e800000.flash | |
| [ 2.737790] Creating 6 MTD partitions on "7e800000.flash": | |
| [ 2.743275] 0x000000000000-0x000000100000 : "nand_uboot" | |
| [ 2.749084] 0x000000100000-0x000000160000 : "nand_uboot_env" | |
| [ 2.755211] 0x000000160000-0x000000180000 : "fman_fw" | |
| [ 2.760701] 0x000000180000-0x0000001c0000 : "ppa" | |
| [ 2.765846] 0x0000001c0000-0x0000001e0000 : "dtb" | |
| [ 2.770989] 0x0000001e0000-0x000020000000 : "nandubi" | |
| [ 2.777420] fsl,ifc-nand 7e800000.nand: IFC NAND device at 0x7e800000, bank 0 | |
| [ 2.785565] libphy: Fixed MDIO Bus: probed | |
| [ 2.790149] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 2.795198] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> | |
| [ 2.802005] libphy: Freescale XGMAC MDIO Bus: probed | |
| [ 2.808289] libphy: Freescale XGMAC MDIO Bus: probed | |
| [ 2.813320] libphy: Freescale XGMAC MDIO Bus: probed | |
| [ 2.818478] libphy: Freescale XGMAC MDIO Bus: probed | |
| [ 2.823638] libphy: Freescale XGMAC MDIO Bus: probed | |
| [ 2.828791] libphy: Freescale XGMAC MDIO Bus: probed | |
| [ 2.833941] libphy: Freescale XGMAC MDIO Bus: probed | |
| [ 2.839099] libphy: Freescale XGMAC MDIO Bus: probed | |
| [ 2.844249] libphy: Freescale XGMAC MDIO Bus: probed | |
| [ 2.861196] Freescale FM module, FMD API version 21.1.0 | |
| [ 2.868689] Freescale FM Ports module | |
| [ 2.872347] fsl_mac: fsl_mac: FSL FMan MAC API based driver | |
| [ 2.878353] fsl_mac 1ae0000.ethernet: FMan MEMAC | |
| [ 2.882972] fsl_mac 1ae0000.ethernet: FMan MAC address: 00:0a:fa:24:23:4f | |
| [ 2.890080] fsl_mac 1ae2000.ethernet: FMan MEMAC | |
| [ 2.894697] fsl_mac 1ae2000.ethernet: FMan MAC address: 00:0a:fa:24:23:50 | |
| [ 2.901559] fsl_mac 1ae4000.ethernet: FMan MEMAC | |
| [ 2.906175] fsl_mac 1ae4000.ethernet: FMan MAC address: 00:0a:fa:24:23:53 | |
| [ 2.913185] fsl_mac 1ae6000.ethernet: FMan MEMAC | |
| [ 2.917803] fsl_mac 1ae6000.ethernet: FMan MAC address: 00:0a:fa:24:23:54 | |
| [ 2.924916] fsl_mac 1ae8000.ethernet: FMan MEMAC | |
| [ 2.929533] fsl_mac 1ae8000.ethernet: FMan MAC address: 00:0a:fa:24:23:51 | |
| [ 2.936646] fsl_mac 1aea000.ethernet: FMan MEMAC | |
| [ 2.941261] fsl_mac 1aea000.ethernet: FMan MAC address: 00:0a:fa:24:23:52 | |
| [ 2.948077] fsl_dpa: FSL DPAA Ethernet driver | |
| [ 2.953440] fsl_dpa soc:fsl,dpaa:ethernet@0: Skip RX PCD High Priority FQs initialization | |
| [ 2.965307] fsl_dpa: fsl_dpa: Probed interface eth0 | |
| [ 2.970800] fsl_dpa soc:fsl,dpaa:ethernet@1: Skip RX PCD High Priority FQs initialization | |
| [ 2.982946] fsl_dpa: fsl_dpa: Probed interface eth1 | |
| [ 2.988572] fsl_dpa soc:fsl,dpaa:ethernet@2: Skip RX PCD High Priority FQs initialization | |
| [ 3.000993] fsl_dpa: fsl_dpa: Probed interface eth2 | |
| [ 3.006741] fsl_dpa soc:fsl,dpaa:ethernet@3: Skip RX PCD High Priority FQs initialization | |
| [ 3.013613] ata1: SATA link down (SStatus 0 SControl 300) | |
| [ 3.024862] fsl_dpa: fsl_dpa: Probed interface eth3 | |
| [ 3.030750] fsl_dpa soc:fsl,dpaa:ethernet@4: Skip RX PCD High Priority FQs initialization | |
| [ 3.043645] fsl_dpa: fsl_dpa: Probed interface eth4 | |
| [ 3.049654] fsl_dpa soc:fsl,dpaa:ethernet@5: Skip RX PCD High Priority FQs initialization | |
| [ 3.062759] fsl_dpa: fsl_dpa: Probed interface eth5 | |
| [ 3.067793] fsl_dpa soc:fsl,dpaa:ethernet@8: of_find_device_by_node(/soc/fman@1a00000/ethernet@f0000) failed | |
| [ 3.077626] fsl_dpa: probe of soc:fsl,dpaa:ethernet@8 failed with error -22 | |
| [ 3.084614] fsl_advanced: FSL DPAA Advanced drivers: | |
| [ 3.089572] fsl_proxy: FSL DPAA Proxy initialization driver | |
| [ 3.095335] fsl_oh: FSL FMan Offline Parsing port driver | |
| [ 3.101042] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI | |
| [ 3.108086] e1000: Copyright (c) 1999-2006 Intel Corporation. | |
| [ 3.113878] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k | |
| [ 3.119705] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 3.125652] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k | |
| [ 3.132608] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 3.138203] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k | |
| [ 3.146028] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 3.151964] sky2: driver version 1.30 | |
| [ 3.156155] VFIO - User Level meta-driver version: 0.3 | |
| [ 3.161702] dwc3 2f00000.usb3: request value same as default, ignoring | |
| [ 3.168485] dwc3 3000000.usb3: request value same as default, ignoring | |
| [ 3.175178] dwc3 3100000.usb3: request value same as default, ignoring | |
| [ 3.182415] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 3.188937] ehci-pci: EHCI PCI platform driver | |
| [ 3.193402] ehci-platform: EHCI generic platform driver | |
| [ 3.198753] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 3.204935] ohci-pci: OHCI PCI platform driver | |
| [ 3.209401] ohci-platform: OHCI generic platform driver | |
| [ 3.214995] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| [ 3.220487] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 | |
| [ 3.228358] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x02010010 | |
| [ 3.237082] xhci-hcd xhci-hcd.0.auto: irq 44, io mem 0x02f00000 | |
| [ 3.243296] hub 1-0:1.0: USB hub found | |
| [ 3.247056] hub 1-0:1.0: 1 port detected | |
| [ 3.251130] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| [ 3.256616] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 | |
| [ 3.264298] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 3.272629] hub 2-0:1.0: USB hub found | |
| [ 3.276387] hub 2-0:1.0: 1 port detected | |
| [ 3.280476] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 3.285966] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 | |
| [ 3.293805] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x02010010 | |
| [ 3.302522] xhci-hcd xhci-hcd.1.auto: irq 45, io mem 0x03000000 | |
| [ 3.308683] hub 3-0:1.0: USB hub found | |
| [ 3.312442] hub 3-0:1.0: 1 port detected | |
| [ 3.316496] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 3.321982] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 | |
| [ 3.329658] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 3.337987] hub 4-0:1.0: USB hub found | |
| [ 3.341742] hub 4-0:1.0: 1 port detected | |
| [ 3.345825] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller | |
| [ 3.351314] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 5 | |
| [ 3.359210] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x02010010 | |
| [ 3.367923] xhci-hcd xhci-hcd.2.auto: irq 46, io mem 0x03100000 | |
| [ 3.374090] hub 5-0:1.0: USB hub found | |
| [ 3.377846] hub 5-0:1.0: 1 port detected | |
| [ 3.381898] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller | |
| [ 3.387431] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6 | |
| [ 3.395109] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 3.403448] hub 6-0:1.0: USB hub found | |
| [ 3.407197] hub 6-0:1.0: 1 port detected | |
| [ 3.411358] usbcore: registered new interface driver usb-storage | |
| [ 3.418524] mousedev: PS/2 mouse device common for all mice | |
| [ 3.424532] i2c /dev entries driver | |
| [ 3.429019] imx2-wdt 2ad0000.wdog: timeout 60 sec (nowayout=0) | |
| [ 3.435204] qoriq_cpufreq: Freescale QorIQ CPU frequency scaling driver | |
| [ 3.442202] sdhci: Secure Digital Host Controller Interface driver | |
| [ 3.448437] sdhci: Copyright(c) Pierre Ossman | |
| [ 3.452859] Synopsys Designware Multimedia Card Interface Driver | |
| [ 3.459242] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 3.503429] mmc0: SDHCI controller on 1560000.esdhc [1560000.esdhc] using ADMA 64-bit | |
| [ 3.519622] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 3.526676] platform caam_qi: Linux CAAM Queue I/F driver initialised | |
| [ 3.533124] caam 1700000.crypto: Instantiated RNG4 SH1 | |
| [ 3.538268] caam 1700000.crypto: device ID = 0x0a12060000000000 (Era 8) | |
| [ 3.544878] caam 1700000.crypto: job rings = 3, qi = 1, dpaa2 = no | |
| [ 3.553942] caam algorithms registered in /proc/crypto | |
| [ 3.560732] platform caam_qi: algorithms registered in /proc/crypto | |
| [ 3.567908] caam_jr 1710000.jr: registering rng-caam | |
| [ 3.572926] caam 1700000.crypto: caam pkc algorithms registered in /proc/crypto | |
| [ 3.580628] usbcore: registered new interface driver usbhid | |
| [ 3.586198] usbhid: USB HID core driver | |
| [ 3.590901] Freescale USDPAA process driver | |
| [ 3.595083] fsl-usdpaa: no region found | |
| [ 3.598912] Freescale USDPAA process IRQ driver | |
| [ 3.604295] Initializing XFRM netlink socket | |
| [ 3.608614] NET: Registered protocol family 10 | |
| [ 3.613718] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
| [ 3.619958] NET: Registered protocol family 17 | |
| [ 3.624416] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 3.628612] Key type dns_resolver registered | |
| [ 3.632889] Key type ceph registered | |
| [ 3.636516] libceph: loaded (mon/osd proto 15/24) | |
| [ 3.641528] registered taskstats version 1 | |
| [ 3.646181] Btrfs loaded, crc32c=crc32c-generic | |
| [ 3.651305] ubi0: attaching mtd5 | |
| [ 3.698975] random: fast init done | |
| [ 3.707422] usb 5-1: new high-speed USB device number 2 using xhci-hcd | |
| [ 3.713945] usb 5-1: new high-speed USB device number 2 using xhci-hcd | |
| [ 3.862645] usb 5-1: config 1 has an invalid interface number: 8 but max is 4 | |
| [ 3.869776] usb 5-1: config 1 has an invalid interface number: 10 but max is 4 | |
| [ 3.876992] usb 5-1: config 1 has no interface number 1 | |
| [ 3.882210] usb 5-1: config 1 has no interface number 4 | |
| [ 5.774279] ubi0: scanning is finished | |
| [ 5.786000] ubi0: attached mtd5 (name "nandubi", size 510 MiB) | |
| [ 5.791841] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes | |
| [ 5.798713] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 | |
| [ 5.805495] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 | |
| [ 5.812452] ubi0: good PEBs: 4077, bad PEBs: 4, corrupted PEBs: 0 | |
| [ 5.818540] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128 | |
| [ 5.825759] ubi0: max/mean erase counter: 19/13, WL threshold: 4096, image sequence number: 1086650986 | |
| [ 5.835057] ubi0: available PEBs: 1649, total reserved PEBs: 2428, PEBs reserved for bad PEB handling: 76 | |
| [ 5.844629] ubi0: background thread "ubi_bgt0d" started, PID 2152 | |
| [ 5.844889] hctosys: unable to open rtc device (rtc0) | |
| [ 5.845034] ALSA device list: | |
| [ 5.845036] No soundcards found. | |
| [ 5.935321] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs1", R/O mode | |
| [ 5.943670] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes | |
| [ 5.953578] UBIFS (ubi0:1): FS size: 139165696 bytes (132 MiB, 1096 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) | |
| [ 5.964265] UBIFS (ubi0:1): reserved for root: 0 bytes (0 KiB) | |
| [ 5.970093] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 6966CE95-7AD1-431E-AD32-F071E492DCE6, small LPT model | |
| [ 5.982382] VFS: Mounted root (ubifs filesystem) readonly on device 0:12. | |
| [ 5.989374] Freeing unused kernel memory: 704K | |
| [ 6.074866] init: Console is alive | |
| [ 6.078905] init: - watchdog - | |
| [ 6.207558] kmodloader: loading kernel modules from /etc/modules-boot.d/* | |
| [ 6.238052] input_polldev: no symbol version for module_layout | |
| [ 6.244735] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0 | |
| [ 6.254043] kmodloader: done loading kernel modules from /etc/modules-boot.d/* | |
| [ 6.267155] init: - preinit - | |
| [ 6.351693] fsl_dpa soc:fsl,dpaa:ethernet@2 fm1-mac3: renamed from eth2 | |
| [ 6.376354] fsl_dpa soc:fsl,dpaa:ethernet@4 eth2: renamed from eth4 | |
| [ 6.396269] fsl_dpa soc:fsl,dpaa:ethernet@3 fm1-mac4: renamed from eth3 | |
| [ 6.416230] fsl_dpa soc:fsl,dpaa:ethernet@5 eth3: renamed from eth5 | |
| [ 6.448225] fsl_dpa soc:fsl,dpaa:ethernet@2 eth4: renamed from fm1-mac3 | |
| [ 6.476223] fsl_dpa soc:fsl,dpaa:ethernet@3 eth5: renamed from fm1-mac4 | |
| [ 6.652150] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| Press the [f] key and hit [enter] to enter failsafe mode | |
| Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | |
| [ 9.692180] mount_root: mounting /dev/root | |
| [ 9.697484] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 2231 | |
| [ 9.704761] mount_root: loading kmods from internal overlay | |
| [ 9.714199] kmodloader: loading kernel modules from //etc/modules-boot.d/* | |
| [ 9.721437] kmodloader: done loading kernel modules from //etc/modules-boot.d/* | |
| [ 10.276711] block: attempting to load /etc/config/fstab | |
| [ 10.285139] block: extroot: not configured | |
| [ 10.290765] urandom-seed: Seeding with /etc/urandom.seed | |
| [ 10.324982] procd: - early - | |
| [ 10.328487] procd: - watchdog - | |
| [ 10.891096] procd: - watchdog - | |
| [ 10.894344] procd: - ubus - | |
| [ 10.950497] procd: - init - | |
| Please press Enter to activate this console. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment