Skip to content

Instantly share code, notes, and snippets.

@mckeed
Created July 17, 2015 04:09
Show Gist options
  • Save mckeed/f93b6869dac473673f66 to your computer and use it in GitHub Desktop.
Save mckeed/f93b6869dac473673f66 to your computer and use it in GitHub Desktop.
Z-Wave RGBW Light device handler
/**
* Copyright 2015 SmartThings
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
* in compliance with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
* for the specific language governing permissions and limitations under the License.
*
* Z-Wave RGBW Light
*
* Author: SmartThings
* Date: 2015-7-12
*/
metadata {
definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings") {
capability "Switch Level"
capability "Color Control"
capability "Color Temperature"
capability "Switch"
capability "Refresh"
capability "Actuator"
capability "Sensor"
command "reset"
command "refresh"
fingerprint inClusters: "0x26,0x33"
fingerprint inClusters: "0x33"
}
simulator {
}
standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
}
standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat") {
state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
}
standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
}
controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
state "level", action:"switch level.setLevel"
}
controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
state "color", action:"setColor"
}
valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
state "level", label: 'Level ${currentValue}%'
}
controlTile("colorTempControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false) {
state "colorTemperature", action:"setColorTemperature"
}
valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
state "hue", label: 'Hue ${currentValue} '
}
main(["switch"])
details(["switch", "levelSliderControl", "rgbSelector", "reset", "colorTempControl", "refresh"])
}
def updated() {
response(refresh())
}
def parse(description) {
def result = null
if (description != "updated") {
def cmd = zwave.parse(description, [0x20: 1, 0x26: 3, 0x70: 1, 0x33:3])
if (cmd) {
result = zwaveEvent(cmd)
log.debug("'$description' parsed to $result")
} else {
log.debug("Couldn't zwave.parse '$description'")
}
}
result
}
def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
dimmerEvents(cmd)
}
def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
dimmerEvents(cmd)
}
def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
dimmerEvents(cmd)
}
private dimmerEvents(physicalgraph.zwave.Command cmd) {
def value = (cmd.value ? "on" : "off")
def result = [createEvent(name: "switch", value: value, descriptionText: "$device.displayName was turned $value")]
if (cmd.value) {
result << createEvent(name: "level", value: cmd.value, unit: "%")
}
return result
}
def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
response(command(zwave.switchMultilevelV1.switchMultilevelGet()))
}
def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x84: 1])
if (encapsulatedCommand) {
state.sec = 1
def result = zwaveEvent(encapsulatedCommand)
result = result.collect {
if (it instanceof physicalgraph.device.HubAction && !it.toString().startsWith("9881")) {
response(cmd.CMD + "00" + it.toString())
} else {
it
}
}
result
}
}
def zwaveEvent(physicalgraph.zwave.Command cmd) {
def linkText = device.label ?: device.name
[linkText: linkText, descriptionText: "$linkText: $cmd", displayed: false]
}
def on() {
commands([
zwave.basicV1.basicSet(value: 0xFF),
zwave.switchMultilevelV3.switchMultilevelGet(),
], 3500)
}
def off() {
commands([
zwave.basicV1.basicSet(value: 0x00),
zwave.switchMultilevelV3.switchMultilevelGet(),
], 3500)
}
def setLevel(level) {
setLevel(level, 1)
}
def setLevel(level, duration) {
if(level > 99) level = 99
commands([
zwave.switchMultilevelV3.switchMultilevelSet(value: level, dimmingDuration: duration),
zwave.switchMultilevelV3.switchMultilevelGet(),
], (duration && duration < 12) ? (duration * 1000) : 3500)
}
def refresh() {
commands([
zwave.switchMultilevelV3.switchMultilevelGet(),
], 1000)
}
def setSaturation(percent) {
log.debug "setSaturation($percent)"
setColor(saturation: percent)
}
def setHue(value) {
log.debug "setHue($value)"
setColor(hue: value)
}
def setColor(value) {
def result = []
log.debug "setColor: ${value}"
if (value.hex) {
def c = value.hex.findAll(/[0-9a-fA-F]{2}/).collect { Integer.parseInt(it, 16) }
result << zwave.switchColorV3.switchColorSet(red:c[0], green:c[1], blue:c[2], warmWhite:0, coldWhite:0)
} else {
def hue = value.hue ?: device.currentValue("hue")
def saturation = value.saturation ?: device.currentValue("saturation")
if(hue == null) hue = 13
if(saturation == null) saturation = 13
def rgb = huesatToRGB(hue, saturation)
result << zwave.switchColorV3.switchColorSet(red: rgb[0], green: rgb[1], blue: rgb[2], warmWhite:0, coldWhite:0)
}
if(value.hue) sendEvent(name: "hue", value: value.hue)
if(value.hex) sendEvent(name: "color", value: value.hex)
if(value.switch) sendEvent(name: "switch", value: value.switch)
if(value.saturation) sendEvent(name: "saturation", value: value.saturation)
commands(result)
}
def setColorTemperature(percent) {
if(percent > 99) percent = 99
int warmValue = percent * 255 / 99
command(zwave.switchColorV3.switchColorSet(red:0, green:0, blue:0, warmWhite:warmValue, coldWhite:(255 - warmValue)))
}
def reset() {
log.debug "reset()"
sendEvent(name: "color", value: "#ffffff")
setColorTemperature(99)
}
private command(physicalgraph.zwave.Command cmd) {
if (state.sec) {
zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
} else {
cmd.format()
}
}
private commands(commands, delay=200) {
delayBetween(commands.collect{ command(it) }, delay)
}
def rgbToHSV(red, green, blue) {
float r = red / 255f
float g = green / 255f
float b = blue / 255f
float max = [r, g, b].max()
float delta = max - [r, g, b].min()
def hue = 13
def saturation = 0
if (max && delta) {
saturation = 100 * delta / max
if (r == max) {
hue = ((g - b) / delta) * 100 / 6
} else if (g == max) {
hue = (2 + (b - r) / delta) * 100 / 6
} else {
hue = (4 + (r - g) / delta) * 100 / 6
}
}
[hue: hue, saturation: saturation, value: max * 100]
}
def huesatToRGB(float hue, float sat) {
while(hue >= 100) hue -= 100
int h = (int)(hue / 100 * 6)
float f = hue / 100 * 6 - h
int p = Math.round(255 * (1 - (sat / 100)))
int q = Math.round(255 * (1 - (sat / 100) * f))
int t = Math.round(255 * (1 - (sat / 100) * (1 - f)))
switch (h) {
case 0: return [255, t, p]
case 1: return [q, 255, p]
case 2: return [p, 255, t]
case 3: return [p, q, 255]
case 4: return [t, p, 255]
case 5: return [255, p, q]
}
}
@pezon
Copy link

pezon commented Aug 8, 2016

Hey, thanks for this. Where can I deploy or save this script? Thanks.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment