Arduino IRLib Usage

ArduinoIRLibUsage

#include "IRLibAll.h"
 
#define MY_PROTOCOL NEC
#define RIGHT_ARROW 16761405
#define LEFT_ARROW 16720605
#define SELECT_BUTTON 16712445
#define UP_ARROW 16736925
#define DOWN_ARROW 16754775
#define BUTTON_0 16730805
#define BUTTON_1 16738455
#define BUTTON_2 16750695
#define BUTTON_3 16756815
#define BUTTON_4 16724175
#define BUTTON_5 16718055
#define BUTTON_6 16743045
#define BUTTON_7 16716015
#define BUTTON_8 16726215
#define BUTTON_9 16734885
#define BUTTON_DIEZ 16732845
#define BUTTON_STAR 16728765
 
IRrecvPCI myReceiver(2);
 
IRdecode myDecoder;
 
void setup() {
Serial.begin(9600);
delay(2000); while (!Serial);
myReceiver.enableIRIn();
Serial.println(F("Hazir"));
pinMode(3, OUTPUT);
digitalWrite(3, HIGH);
pinMode(4, OUTPUT);
digitalWrite(4, HIGH);
pinMode(5, OUTPUT);
digitalWrite(5, HIGH);
pinMode(6, OUTPUT);
digitalWrite(6, HIGH);
}
uint32_t Previous;
void loop() {
 
if (myReceiver.getResults()) {
myDecoder.decode();
 
if (myDecoder.protocolNum == MY_PROTOCOL) {
 
switch (myDecoder.value) {
case LEFT_ARROW:
Serial.println("left");
//digitalWrite(13, LOW);
break;
case RIGHT_ARROW:
Serial.println("right");
break;
case SELECT_BUTTON:
Serial.println("select");
break;
case UP_ARROW:
Serial.println("up");
break;
case DOWN_ARROW:
Serial.println("down");
break;
case BUTTON_0:
Serial.println("t0");
break;
case BUTTON_1:
toggleR1();
Serial.println("t1");
break;
case BUTTON_2:
toggleR2();
Serial.println("t2");
break;
case BUTTON_3:
toggleR3();
Serial.println("t3");
break;
case BUTTON_4:
toggleR4();
Serial.println("t4");
break;
case BUTTON_5:
Serial.println("t5");
toggleR1();
toggleR2();
toggleR3();
toggleR4();
break;
case BUTTON_6:
Serial.println("t6");
break;
case BUTTON_7:
Serial.println("7");
break;
case BUTTON_8:
Serial.println("t8");
break;
case BUTTON_9:
Serial.println("t9");
break;
case BUTTON_DIEZ:
Serial.println("DIEZ");
break;
case BUTTON_STAR:
Serial.println("STAR");
break;
}
 
Serial.println(myDecoder.value);
Serial.println(Previous);
}
myReceiver.enableIRIn();
}
}
 
int R1;
void toggleR1(){
if(R1 == 0){
digitalWrite(3, LOW);
R1 = 1;
} else{
R1 = 0;
digitalWrite(3, HIGH);
}
}
 
int R2;
void toggleR2(){
if(R2 == 0){
digitalWrite(4, LOW);
R2 = 1;
} else{
R2 = 0;
digitalWrite(4, HIGH);
}
}
 
int R3;
void toggleR3(){
if(R3 == 0){
digitalWrite(5, LOW);
R3 = 1;
} else{
R3 = 0;
digitalWrite(5, HIGH);
}
}
 
int R4;
void toggleR4(){
if(R4 == 0){
digitalWrite(6, LOW);
R4 = 1;
} else{
R4 = 0;
digitalWrite(6, HIGH);
}
}