gistfile1.txt

U-Boot SPL 2017.03-armbian (Apr 04 2017 - 18:23:08)
DRAM: 1024 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1


U-Boot 2017.03-armbian (Apr 04 2017 - 18:23:08 +0200) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Model: Olimex A20-OLinuXino-LIME2
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
SCSI:  SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net:   eth0: ethernet@01c50000
Hit any key to stop autoboot:  0
38518 bytes read in 177 ms (211.9 KiB/s)
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3550 bytes read in 213 ms (15.6 KiB/s)
## Executing script at 43100000
U-boot loaded from SD
Boot script loaded from mmc
153 bytes read in 151 ms (1000 Bytes/s)
6216162 bytes read in 642 ms (9.2 MiB/s)
5607336 bytes read in 627 ms (8.5 MiB/s)
Found legacy kernel configuration
54924 bytes read in 362 ms (147.5 KiB/s)
## Loading init Ramdisk from Legacy Image at 43300000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    6216098 Bytes = 5.9 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Ramdisk to 49a12000, end 49fff9a2 ... OK

Starting kernel ...

<6>Booting Linux on physical CPU 0