-
-
Save mightyllama89/6b25293c4327fdb4245d36abe67ee0e8 to your computer and use it in GitHub Desktop.
tlp-stat
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| --- TLP 1.3.1 -------------------------------------------- | |
| +++ Configured Settings: | |
| defaults.conf L0004: TLP_ENABLE="1" | |
| defaults.conf L0005: TLP_PERSISTENT_DEFAULT="0" | |
| defaults.conf L0006: DISK_IDLE_SECS_ON_AC="0" | |
| defaults.conf L0007: DISK_IDLE_SECS_ON_BAT="2" | |
| defaults.conf L0008: MAX_LOST_WORK_SECS_ON_AC="15" | |
| defaults.conf L0009: MAX_LOST_WORK_SECS_ON_BAT="60" | |
| defaults.conf L0010: CPU_ENERGY_PERF_POLICY_ON_AC="balance_performance" | |
| defaults.conf L0011: CPU_ENERGY_PERF_POLICY_ON_BAT="balance_power" | |
| defaults.conf L0012: SCHED_POWERSAVE_ON_AC="0" | |
| defaults.conf L0013: SCHED_POWERSAVE_ON_BAT="1" | |
| defaults.conf L0014: NMI_WATCHDOG="0" | |
| defaults.conf L0015: DISK_DEVICES="nvme0n1 sda" | |
| /etc/tlp.conf L0158: DISK_APM_LEVEL_ON_AC="keep" | |
| /etc/tlp.conf L0159: DISK_APM_LEVEL_ON_BAT="keep" | |
| defaults.conf L0018: DISK_IOSCHED="keep keep" | |
| defaults.conf L0019: SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" | |
| defaults.conf L0020: SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" | |
| defaults.conf L0021: AHCI_RUNTIME_PM_TIMEOUT="15" | |
| defaults.conf L0022: PCIE_ASPM_ON_AC="default" | |
| defaults.conf L0023: PCIE_ASPM_ON_BAT="default" | |
| defaults.conf L0024: RADEON_POWER_PROFILE_ON_AC="default" | |
| defaults.conf L0025: RADEON_POWER_PROFILE_ON_BAT="default" | |
| defaults.conf L0026: RADEON_DPM_PERF_LEVEL_ON_AC="auto" | |
| defaults.conf L0027: RADEON_DPM_PERF_LEVEL_ON_BAT="auto" | |
| /etc/tlp.conf L0264: WIFI_PWR_ON_AC="off" | |
| /etc/tlp.conf L0265: WIFI_PWR_ON_BAT="on" | |
| defaults.conf L0030: WOL_DISABLE="Y" | |
| /etc/tlp.conf L0276: SOUND_POWER_SAVE_ON_AC="1" | |
| /etc/tlp.conf L0277: SOUND_POWER_SAVE_ON_BAT="1" | |
| defaults.conf L0033: SOUND_POWER_SAVE_CONTROLLER="Y" | |
| /etc/tlp.conf L0291: BAY_POWEROFF_ON_AC="0" | |
| /etc/tlp.conf L0292: BAY_POWEROFF_ON_BAT="1" | |
| /etc/tlp.conf L0297: BAY_DEVICE="sr0" | |
| /etc/tlp.conf L0302: RUNTIME_PM_ON_AC="on" | |
| /etc/tlp.conf L0303: RUNTIME_PM_ON_BAT="auto" | |
| defaults.conf L0039: RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon" | |
| defaults.conf L0040: USB_AUTOSUSPEND="1" | |
| defaults.conf L0041: USB_BLACKLIST_BTUSB="0" | |
| defaults.conf L0042: USB_BLACKLIST_PHONE="0" | |
| defaults.conf L0043: USB_BLACKLIST_PRINTER="1" | |
| defaults.conf L0044: USB_BLACKLIST_WWAN="0" | |
| defaults.conf L0045: USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN="0" | |
| defaults.conf L0046: RESTORE_DEVICE_STATE_ON_STARTUP="0" | |
| defaults.conf L0047: RESTORE_THRESHOLDS_ON_BAT="0" | |
| defaults.conf L0048: NATACPI_ENABLE="1" | |
| defaults.conf L0049: TPACPI_ENABLE="1" | |
| defaults.conf L0050: TPSMAPI_ENABLE="1" | |
| /etc/tlp.conf L0027: TLP_DEBUG="arg bat disk lock nm path pm ps rf run sysfs udev usb" | |
| /etc/tlp.conf L0121: CPU_BOOST_ON_AC="1" | |
| /etc/tlp.conf L0122: CPU_BOOST_ON_BAT="0" | |
| /etc/tlp.conf L0380: DEVICES_TO_DISABLE_ON_STARTUP="wwan" | |
| /etc/tlp.conf L0403: DEVICES_TO_ENABLE_ON_AC="wifi" | |
| /etc/tlp.conf L0408: DEVICES_TO_DISABLE_ON_BAT="wwan" | |
| /etc/tlp.conf L0455: DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi" | |
| /etc/tlp.conf L0461: DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi" | |
| +++ System Info | |
| System = Apple Inc. 1.0 MacBookPro6,2 | |
| BIOS = MBP61.88Z.0057.B0F.1112091028 | |
| Release = Ubuntu 20.04.3 LTS | |
| Kernel = 5.4.0-81-generic #91-Ubuntu SMP Thu Jul 15 19:09:17 UTC 2021 x86_64 | |
| /proc/cmdline = BOOT_IMAGE=/boot/vmlinuz-5.4.0-81-generic root=UUID=ca546a65-0631-4bf6-a824-65160b27c906 ro i915.modeset=1 i915.lvds_channel_mode=2 i915.force_probe=1 i915.enable_dpcd_backlight=0 i915.panel_use_ssc=0 | |
| Init system = systemd v245 (245.4-4ubuntu3.11) | |
| Boot mode = UEFI | |
| +++ TLP Status | |
| State = enabled | |
| RDW state = enabled | |
| Last run = 01:23:27 PM, 6 sec(s) ago | |
| Mode = AC | |
| Power source = battery | |
| +++ Processor | |
| CPU model = Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz | |
| /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = acpi-cpufreq | |
| /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = ondemand | |
| /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil | |
| /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 1197000 [kHz] | |
| /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 2395000 [kHz] | |
| /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies = 2395000 2394000 2261000 2128000 1995000 1862000 1729000 1596000 1463000 1330000 1197000 [kHz] | |
| /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver = acpi-cpufreq | |
| /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = ondemand | |
| /sys/devices/system/cpu/cpu1/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil | |
| /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq = 1197000 [kHz] | |
| /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq = 2395000 [kHz] | |
| /sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies = 2395000 2394000 2261000 2128000 1995000 1862000 1729000 1596000 1463000 1330000 1197000 [kHz] | |
| /sys/devices/system/cpu/cpu2/cpufreq/scaling_driver = acpi-cpufreq | |
| /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor = ondemand | |
| /sys/devices/system/cpu/cpu2/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil | |
| /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq = 1197000 [kHz] | |
| /sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq = 2395000 [kHz] | |
| /sys/devices/system/cpu/cpu2/cpufreq/scaling_available_frequencies = 2395000 2394000 2261000 2128000 1995000 1862000 1729000 1596000 1463000 1330000 1197000 [kHz] | |
| /sys/devices/system/cpu/cpu3/cpufreq/scaling_driver = acpi-cpufreq | |
| /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor = ondemand | |
| /sys/devices/system/cpu/cpu3/cpufreq/scaling_available_governors = conservative ondemand userspace powersave performance schedutil | |
| /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq = 1197000 [kHz] | |
| /sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq = 2395000 [kHz] | |
| /sys/devices/system/cpu/cpu3/cpufreq/scaling_available_frequencies = 2395000 2394000 2261000 2128000 1995000 1862000 1729000 1596000 1463000 1330000 1197000 [kHz] | |
| /sys/devices/system/cpu/cpufreq/boost = 1 | |
| Intel EPB: unsupported CPU. | |
| /sys/module/workqueue/parameters/power_efficient = Y | |
| /proc/sys/kernel/nmi_watchdog = 0 | |
| +++ Temperatures | |
| CPU temp = 53 [°C] | |
| Fan speed (fan1) = 2881 [/min] | |
| Fan speed (fan2) = 2889 [/min] | |
| +++ File System | |
| /proc/sys/vm/laptop_mode = 0 | |
| /proc/sys/vm/dirty_writeback_centisecs = 1500 | |
| /proc/sys/vm/dirty_expire_centisecs = 1500 | |
| /proc/sys/vm/dirty_ratio = 20 | |
| /proc/sys/vm/dirty_background_ratio = 10 | |
| +++ Storage Devices | |
| Devices = nvme0n1 sda | |
| /dev/nvme0n1: not present. | |
| /dev/sda: | |
| Type = ATA | |
| Model = SanDisk Ultra II 480GB | |
| Firmware = X41100RL | |
| APM Level = 254 | |
| Status = active/idle | |
| TRIM = supported | |
| Scheduler = [mq-deadline] none (multi queue) | |
| Runtime PM: control = on, autosuspend_delay_ms = -1 | |
| SMART info: | |
| 5 Reallocated_Sector_Ct = 0 | |
| 9 Power_On_Hours = 22296 [h] | |
| 12 Power_Cycle_Count = 482 | |
| 194 Temperature_Celsius = 29 (Min/Max 17/67) [°C] | |
| +++ AHCI Link Power Management (ALPM) | |
| /sys/class/scsi_host/host0/link_power_management_policy = med_power_with_dipm | |
| /sys/class/scsi_host/host1/link_power_management_policy = med_power_with_dipm | |
| /sys/class/scsi_host/host2/link_power_management_policy = med_power_with_dipm | |
| /sys/class/scsi_host/host3/link_power_management_policy = med_power_with_dipm | |
| +++ AHCI Host Controller Runtime Power Management | |
| /sys/bus/pci/devices/0000:00:1f.2/ata1/power/control = on | |
| /sys/bus/pci/devices/0000:00:1f.2/ata2/power/control = on | |
| /sys/bus/pci/devices/0000:00:1f.2/ata3/power/control = on | |
| /sys/bus/pci/devices/0000:00:1f.2/ata4/power/control = on | |
| +++ Intel Graphics | |
| /sys/module/i915/parameters/enable_dc = -1 (use per-chip default) | |
| /sys/module/i915/parameters/enable_fbc = 0 (disabled) | |
| /sys/module/i915/parameters/enable_psr = 0 (disabled) | |
| /sys/module/i915/parameters/modeset = 1 (enabled) | |
| +++ Wireless | |
| bluetooth = on | |
| wifi = on | |
| wwan = none (no device) | |
| hci0(btusb) : bluetooth, not connected | |
| wlp3s0(wl) : wifi, connected, power management = off | |
| +++ Audio | |
| /sys/module/snd_hda_intel/parameters/power_save = 1 | |
| /sys/module/snd_hda_intel/parameters/power_save_controller = Y | |
| +++ PCIe Active State Power Management | |
| /sys/module/pcie_aspm/parameters/policy = [default] performance powersave powersupersave | |
| +++ Runtime Power Management | |
| Device blacklist = (not configured) | |
| Driver blacklist = amdgpu mei_me nouveau nvidia pcieport radeon | |
| /sys/bus/pci/devices/0000:00:00.0/power/control = on (0x060000, Host bridge, no driver) | |
| /sys/bus/pci/devices/0000:00:01.0/power/control = on (0x060400, PCI bridge, pcieport) | |
| /sys/bus/pci/devices/0000:00:02.0/power/control = on (0x030000, VGA compatible controller, i915) | |
| /sys/bus/pci/devices/0000:00:1a.0/power/control = on (0x0c0300, USB controller, no driver) | |
| /sys/bus/pci/devices/0000:00:1a.7/power/control = on (0x0c0320, USB controller, ehci-pci) | |
| /sys/bus/pci/devices/0000:00:1b.0/power/control = on (0x040300, Audio device, snd_hda_intel) | |
| /sys/bus/pci/devices/0000:00:1c.0/power/control = on (0x060400, PCI bridge, pcieport) | |
| /sys/bus/pci/devices/0000:00:1c.1/power/control = auto (0x060400, PCI bridge, pcieport) | |
| /sys/bus/pci/devices/0000:00:1c.2/power/control = on (0x060400, PCI bridge, pcieport) | |
| /sys/bus/pci/devices/0000:00:1c.3/power/control = on (0x060400, PCI bridge, pcieport) | |
| /sys/bus/pci/devices/0000:00:1d.0/power/control = on (0x0c0300, USB controller, no driver) | |
| /sys/bus/pci/devices/0000:00:1d.7/power/control = on (0x0c0320, USB controller, ehci-pci) | |
| /sys/bus/pci/devices/0000:00:1e.0/power/control = on (0x060401, PCI bridge, no driver) | |
| /sys/bus/pci/devices/0000:00:1f.0/power/control = on (0x060100, ISA bridge, lpc_ich) | |
| /sys/bus/pci/devices/0000:00:1f.2/power/control = on (0x010601, SATA controller, ahci) | |
| /sys/bus/pci/devices/0000:00:1f.3/power/control = on (0x0c0500, SMBus, i801_smbus) | |
| /sys/bus/pci/devices/0000:00:1f.6/power/control = on (0x118000, Signal processing controller, no driver) | |
| /sys/bus/pci/devices/0000:01:00.0/power/control = on (0x030000, VGA compatible controller, nouveau) | |
| /sys/bus/pci/devices/0000:01:00.1/power/control = on (0x040300, Audio device, snd_hda_intel) | |
| /sys/bus/pci/devices/0000:02:00.0/power/control = on (0x020000, Ethernet controller, tg3) | |
| /sys/bus/pci/devices/0000:03:00.0/power/control = on (0x028000, Network controller, wl) | |
| /sys/bus/pci/devices/0000:04:00.0/power/control = on (0x0c0010, FireWire (IEEE 1394), firewire_ohci) | |
| /sys/bus/pci/devices/0000:ff:00.0/power/control = on (0x060000, Host bridge, no driver) | |
| /sys/bus/pci/devices/0000:ff:00.1/power/control = on (0x060000, Host bridge, no driver) | |
| /sys/bus/pci/devices/0000:ff:02.0/power/control = on (0x060000, Host bridge, no driver) | |
| /sys/bus/pci/devices/0000:ff:02.1/power/control = on (0x060000, Host bridge, no driver) | |
| /sys/bus/pci/devices/0000:ff:02.2/power/control = on (0x060000, Host bridge, no driver) | |
| /sys/bus/pci/devices/0000:ff:02.3/power/control = on (0x060000, Host bridge, no driver) | |
| +++ USB | |
| Autosuspend = enabled | |
| Device whitelist = (not configured) | |
| Device blacklist = (not configured) | |
| Bluetooth blacklist = disabled | |
| Phone blacklist = disabled | |
| WWAN blacklist = disabled | |
| Bus 002 Device 004 ID 05ac:8242 control = on, autosuspend_delay_ms = 2000 -- Apple, Inc. Built-in IR Receiver (usbhid) | |
| Bus 002 Device 003 ID 05ac:8507 control = auto, autosuspend_delay_ms = 2000 -- Apple, Inc. Built-in iSight (uvcvideo) | |
| Bus 002 Device 002 ID 0424:2514 control = auto, autosuspend_delay_ms = 0 -- Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub (hub) | |
| Bus 002 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub) | |
| Bus 001 Device 004 ID 05ac:0236 control = on, autosuspend_delay_ms = 2000 -- Apple, Inc. Internal Keyboard/Trackpad (ANSI) (usbhid, bcm5974) | |
| Bus 001 Device 008 ID 05ac:8218 control = auto, autosuspend_delay_ms = 2000 -- Apple, Inc. Bluetooth Host Controller (btusb) | |
| Bus 001 Device 003 ID 0a5c:4500 control = auto, autosuspend_delay_ms = 0 -- Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) (hub) | |
| Bus 001 Device 002 ID 0424:2514 control = auto, autosuspend_delay_ms = 0 -- Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub (hub) | |
| Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub) | |
| +++ Battery Features: Charge Thresholds and Recalibrate | |
| natacpi = inactive (laptop not supported) | |
| tpacpi-bat = inactive (laptop not supported) | |
| tp-smapi = inactive (laptop not supported) | |
| +++ Battery Status: BAT0 | |
| /sys/class/power_supply/BAT0/manufacturer = EGOWAY | |
| /sys/class/power_supply/BAT0/model_name = A1321 | |
| /sys/class/power_supply/BAT0/cycle_count = 67 | |
| /sys/class/power_supply/BAT0/charge_full_design = 7200 [mAh] | |
| /sys/class/power_supply/BAT0/charge_full = 6673 [mAh] | |
| /sys/class/power_supply/BAT0/charge_now = 5994 [mAh] | |
| /sys/class/power_supply/BAT0/current_now = 1741 [mA] | |
| /sys/class/power_supply/BAT0/status = Discharging | |
| Charge = 89.8 [%] | |
| Capacity = 92.7 [%] |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment