Sublime Text Settings

Anaconda.sublime-settings

/*
    Anaconda default settings
*/
{
    /*
        Anaconda Tooltip Options

        Sublime Text 3 supports tooltips since build 3070; if anaconda
        runs in a ST3 installation equal to or newer than build 3070, it
        can be configured to show tooltips for documentation and signatures.

        The options below set how the tooltip looks.
    */
    "anaconda_tooltip_theme": "popup",

    /*
        If you set the following option as true, anaconda will display the
        signatures of the methods in a floating popup.

        *note*: this only has an effect if "display_signatures" is true.
    */
    "enable_signatures_tooltip": true,

    /*
        If you set the following option as true, anaconda will display the
        documentation of modules, classes or methods in a floating popup.
    */
    "enable_docstrings_tooltip": true,

    /*
        If the option below is set as true, anaconda will merge the
        outputs of display_signatures and show documentation.

        *note*: This only has an effect if tooltips are enabled.
    */
    "merge_signatures_and_doc": true,

    /*
        If you set the following option as true, anaconda will display the
        signatures of the methods you are using while typing
    */
    "display_signatures": true,

    /*
        Auto project switching

        If you set this to true, anaconda will detect project switches and
        will reconnect a new JsonServer with the switched project
        configuration.
    */
    "auto_project_switch": true,

    /*
        Python Builder Options

        If enabled, anaconda will add your configured interpreter (if any)
        into your per-project `builder_systems` list if any, or create a
        new one in case you don't define one yourself.

        This is enabled by default; disable it if you experience slowdowns
        when you switch between projects, and file an issue in GitHub.
    */
    "auto_python_builder_enabled": true,

    /*
        Debug Mode:

        If you need to debug the jsonserver.py service for any reason, you
        can configure the following options to make the plugin to connect
        always to the same port in your local machine.

        Procedure:

            1. Set the debug_mode as true
            2. Set the debug_port to your desired port
            3. Close Sublime Text 3
            4. cd to your Packages/Anaconda directory
            5. Start the jsonserver manually:
                python -B anaconda_server/jsonserver.py -p test 9999 DEBUG
            6. Start your Sublime Text 3 and

        Then your anaconda plugin will use the configured server, and you will
        get debug messages in the terminal where you ran it.
    */
    "jsonserver_debug": false,
    "jsonserver_debug_port": 9999,

    /*
        Default python interpreter

        This can (and should) be overridden by project settings.

        NOTE: if you want anaconda to lint and complete using a remote
        python interpreter that runs the anaconda's minserver.py script
        in a remote machine just use it's address:port as interpreter
        for example:

        	"python_interpreter": "tcp://my_remote.machine.com:19360"
    */
    "python_interpreter": "python",

    /*
        Disable anaconda completion

        WARNING: setting this as true will totally disable anaconda completion.
    */
    "disable_anaconda_completion": false,

    /*
        Set those as true if you don't want Sublime Text regular completions
    */
    "suppress_word_completions": false,
    "suppress_explicit_completions": false,

    /*
        If complete_parameters is true, anaconda will add function and class
        parameters to its completions.

        If complete_all_parameters is true, it will add all the possible
        parameters, if it's false, it will add only required parameters
    */
    "complete_parameters": false,
    "complete_all_parameters": false,

    /*
        If you set the following option as true, anaconda will complete
        function parameters on keypress, when cursor is between function
        brackets, independently from any other setting. It also works with
        disabled tooltips.

        Moreover you'll be able to choose at the moment of insertion, whether
        inserting all parameters or just the required parameters.

        Default keybindings (they only work between empty function brackets):
        Tab      : insert required parameters
        Ctrl+Tab : insert all parameters
    */
    "parameters_completion_on_keypress": true,

    /*
        The following set of options controls the autopep autoformatting
        behaviour.

        The full list of errors that can be fixed are:

            E101 - Reindent all lines.
            E111 - Reindent all lines.
            E121 - Fix indentation to be a multiple of four.
            E122 - Add absent indentation for hanging indentation.
            E123 - Align closing bracket to match opening bracket.
            E124 - Align closing bracket to match visual indentation.
            E125 - Indent to distinguish line from next logical line.
            E126 - Fix over-indented hanging indentation.
            E127 - Fix visual indentation.
            E128 - Fix visual indentation.
            E129 - Indent to distinguish line from next logical line.
            E201 - Remove extraneous whitespace.
            E202 - Remove extraneous whitespace.
            E203 - Remove extraneous whitespace.
            E211 - Remove extraneous whitespace.
            E221 - Fix extraneous whitespace around keywords.
            E222 - Fix extraneous whitespace around keywords.
            E223 - Fix extraneous whitespace around keywords.
            E224 - Remove extraneous whitespace around operator.
            E225 - Fix missing whitespace around operator.
            E226 - Fix missing whitespace around operator.
            E227 - Fix missing whitespace around operator.
            E228 - Fix missing whitespace around operator.
            E231 - Add missing whitespace.
            E241 - Fix extraneous whitespace around keywords.
            E242 - Remove extraneous whitespace around operator.
            E251 - Remove whitespace around parameter '=' sign.
            E261 - Fix spacing before comment hash.
            E262 - Fix spacing after comment hash.
            E271 - Fix extraneous whitespace around keywords.
            E272 - Fix extraneous whitespace around keywords.
            E273 - Fix extraneous whitespace around keywords.
            E274 - Fix extraneous whitespace around keywords.
            E301 - Add missing blank line.
            E302 - Add missing 2 blank lines.
            E303 - Remove extra blank lines.
            E304 - Remove blank line following function decorator.
            E401 - Put imports on separate lines.
            E501 - Try to make lines fit within --max-line-length characters.
            E502 - Remove extraneous escape of newline.
            E701 - Put colon-separated compound statement on separate lines.
            E702 - Put semicolon-separated compound statement on separate lines.
            E703 - Put semicolon-separated compound statement on separate lines.
            E711 - Fix comparison with None.
            E712 - Fix comparison with boolean.
            W191 - Reindent all lines.
            W291 - Remove trailing whitespace.
            W293 - Remove trailing whitespace on blank line.
            W391 - Remove trailing blank lines.
            E26  - Format block comments.
            W6   - Fix various deprecated code (via lib2to3).
            W602 - Fix deprecated form of raising exception.
    */

    /*
        Autoformat files on save

        This option is disabled by default, AutoPEP8 is really slow and it get
        the file buffer read only while its working in the background.

        Use this at your own risk.
    */
    "auto_formatting": false,

    /*
        Timeout for the autoformatting tool before fail

        Note: Take into account that depending on the size of the file you
        want to autoformat, this can take a while.
    */
    "auto_formatting_timeout": 1,  // seconds

    /*
        Enable unsafe changes:
            https://github.com/hhatto/autopep8#more-advanced-usage

        Set it as 0 if you are unsure here.
    */
    "aggressive": 0,

    /*
        Do not fix the errors listed here:
        Note: By default we ignore E309 as this is not pep8 but it does
        conflict with pep257 D211.
    */
    "autoformat_ignore":
    [
        "E309"
    ],

    /*
        Fix only the errors listed here:
    */
    "autoformat_select":
    [
    ],

    /*
        Set the threshold limit for McCabe complexity checker.
    */
    "mccabe_threshold": 7,

    /*
        Set to false to disable Anaconda linting entirely.
    */
    "anaconda_linting": true,

    /*
        Sets the linting behaviour for anaconda:

        "always" - Linting works always even while you are writing (in the background)
        "load-save" - Linting works in file load and save only
        "save-only" - Linting works in file save only
    */
    "anaconda_linting_behaviour": "always",

    /*
        The minimum delay in seconds (fractional seconds are okay) before
        a linter is run when the "anaconda_linting" setting is true. This allows
        you to have background linting active, but defer the actual linting
        until you are idle. When this value is greater than the built in linting delay,
        errors are erased when the file is modified, since the assumption is
        you don't want to see errors while you type (unless the option
        anaconda_linter_persistent is true).
    */
    "anaconda_linter_delay": 0.5,

    /*
        If true, anaconda does not remove lint marks while you type.
    */
    "anaconda_linter_persistent": false,

    // If true, anaconda draws gutter marks on line with errors.
    "anaconda_gutter_marks": true,

    /*

        If anaconda_gutter_marks is true, this determines what theme is used.
        Theme 'basic' only adds dots and circles to gutter.

        Other available themes are 'alpha', 'bright', 'dark', 'hard', "retina"
        (for retina displays) and 'simple'. To see icons that will be used for
        each theme check gutter_icon_themes folder in Anaconda package.
    */
    "anaconda_gutter_theme": "basic",

    /*
        If 'outline' (default), anaconda will outline error lines.
        If 'fill', anaconda will fill the lines.
        If 'solid_underline', anaconda will draw a solid underline below regions.
        If 'stippled_underline', anaconda will draw a stippled underline below regions.
        If 'squiggly_underline', anaconda will draw a squiggly underline below regions.
        If 'none', anaconda will not draw anything on error lines.
    */
    "anaconda_linter_mark_style": "squiggly_underline",

    /*
        If this is set to false, anaconda will not underline errors.
    */
    "anaconda_linter_underlines": true,

    /*
        If this is set to true, anaconda will show errors inline.
    */
    "anaconda_linter_phantoms": false,

    /*
        This determines what theme is phantoms used.
    */
    "anaconda_linter_phantoms_theme": "phantom",

    /*
        This determines what template is phantoms used.
    */
    "anaconda_linter_phantoms_template": "default",

    /*
        If anaconda_linter_show_errors_on_save is set to true, anaconda
        will show a list of errors when you save the file.

        This is disabled by default.
    */
    "anaconda_linter_show_errors_on_save": false,

    /*
        Use PyLint instead of PyFlakes and PEP-8

        **** WARNING ****

        - If you set this value as true, PyFlakes and pep8 will not be used.
        - PyLint does *NOT* support linting buffers that are not already saved in
          the file system.

        **** WARNING ****
    */
    "use_pylint": false,

    // Set this to false to turn pep8 checking off completely.
    "pep8": true,

    /*
        If set, the given file will be used as configuration for pep8.

        **** WARNING ****

        - If this option is set to something other than false,
          pep8_ignore and pep8_max_line_length will be silently ignored.

        **** WARNING ****
    */
    "pep8_rcfile": false,

    /*
        A list of pep8 error numbers to ignore.
        The list of error codes is in this file:
            https://pycodestyle.readthedocs.io/en/latest/intro.html#error-codes.
        Search for "Ennn:", where nnn is a 3-digit number.
        E309 is ignored by default as it conflicts with pep257 E211
    */
    "pep8_ignore":
    [
        "E309"
    ],

    // Maximum line length for pep8
    "pep8_max_line_length": 110,

    /*
        You can override the level of PEP8 errors altering this mapping.
        WARNING: Be careful with this option, the only valid error level values
        are:

            * E for errors (reduced to Warning by default)
            * W for warnings (reduced to Violation by default)
            * V for convention violations

        If you set a value that is not listed here, anaconda will ignore your
        setting
    */
    "pep8_error_levels": {"E": "W", "W": "V", "V": "V"},

    // Set this to true to turn pep257 checking on.
    "pep257": false,

    /*
        A list of pep257 error numbers to ignore.

        The list can be found here: http://www.pydocstyle.org/en/2.1.1/error_codes.html

        D209: Multi-line docstring should end with 1 blank line is ignored by
        default as this rule has been deprecated.

        D203: 1 blank line before class docstring is ignored by default, as
        this rule has been deprecated.
    */
    "pep257_ignore":
    [
        "D203",
        "D209"
    ],

    /*
        You can ignore some of the "undefined name xxx" errors (comes
        in handy if you work with post-processors, globals/builtins
        available only at runtime, etc.). You can control what names
        will be ignored with the user setting "pyflakes_ignore".

        Example:

        "pyflakes_ignore":
            [
                "some_custom_builtin_o_mine",
                "A_GLOBAL_CONSTANT"
            ],
    */
    "pyflakes_ignore":
    [
    ],

    /*
        Specific error types to ignore for pyflakes.
        (Uncomment to ignore the below error types.)
    */
    "pyflakes_explicit_ignore":
    [
        // "Redefined",
        // "UnusedImport",
        // "UndefinedName",
        // "UndefinedLocal",
        // "UnusedVariable,",
        // "UndefinedExport",
        // "DuplicateArgument",
        // "RedefinedWhileUnused"
    ],

    /*
        If set, the given file will be used as configuration for PyLint.

        **** WARNING ****

            - If this option is set to something different than false,
              pylint_ignore will be silently ignored

        **** WARNING ****
    */
    "pylint_rcfile": false,

    /*
        You can ignore specific PyLint error codes using this configuration.

        We strongly suggest that you better configure your pylintrc file to
        determine which type of error is important to you.
    */
    "pylint_ignore":
    [
        // "0201"
    ],

    /*
        Ordinarily pyflakes will issue a warning when 'from foo import *'
        is used; this is ignored by default.

        If you want to see this warning, set this option to false.
    */
    "pyflakes_ignore_import_*": true,

    /*
        Set the following option to true if you want anaconda to check
        the validity of your imports when the linting process is fired.

        WARNING: take into account that anaconda compiles and import the
        modules in the JsonServer memory segment in order to check this
    */
    "validate_imports": false,

    /*
    	MyPy

    	Set the following option to true to enable MyPy checker.
    */
    "mypy": false,

    /*
        Set the following variable to set MyPy MYPYPATH.
     */
    "mypy_mypypath": "",

    /*
    	MyPy Silent Imports

    	If true, mypy will not follow imports to .py files.
    */
    "mypy_silent_imports": false,

    /*
    	MyPy Almost Silent

		Same as Silent Imports, but report the imports as errors.
    */
    "mypy_almost_silent": false,

    /*
        MyPy suppress stub warnings

        Suppress stub warnings when silent_imports is not used.
     */
    "mypy_suppress_stub_warnings": true,

    /*
    	MyPy py2

    	Use Python 2 mode.
    */
    "mypy_py2": false,

    /*
    	MyPy Disallow Untyped Calls

    	Disallow calling functions without type annotations from
    	functions with type annotations.
    */
    "mypy_disallow_untyped_calls": false,

    /*
    	MyPy Disallow Untyped Defs

    	Disallow defining functions without type annotations or
    	with incomplete type annotations.
    */
    "mypy_disallow_untyped_defs": false,

	/*
		MyPy Check Untyped Defs

		Type check the interior of functions without type annotations.
	*/
	"mypy_check_untyped_defs": false,

    /*
        MyPy Fast Parser

        Enable the experimental fast parser module of MyPy. In practice
        this seems to be slower, however is required for support of some
        recent syntax changes in Python.
    */
    "mypy_fast_parser": false,

	/*
		MyPy Custom Typing

		Use a custom typing module. Uncomment to enable.
	*/
	// "mypy_custom_typing": "",

    /*
        Debug and development options

        Use those options only for debugging and development purposes, they can
        and will slowdown your Sublime Text

        anconda_debug can be set as: false or profiler

        If this is set as profiler, Anaconda will run a profiler on autocomplete
        and print its results in the Sublime Text console.

        NOTE: cProfile can't be imported in all the platforms, at least not in
        Linux, this is an already reported bug:

            http://www.sublimetext.com/forum/viewtopic.php?f=3&t=13698
            https://github.com/SublimeText/Issues/issues/127

    */
    "anaconda_debug": false,

    /*
        Anaconda test runner related configuration.

        The anaconda's test runner is originally a contribution by NorthIsUp
            https://github.com/NorthIsUp

        Run Twisted's trial based test suite under a virtualenv project:

            // this is your <ProjectName>.sublime-project file
            "settings": {
                "python_interpreter": "~/.virtualenvs/project_name",
                "test_command": "trial",
                "test_virtualenv": "~/.virtualenvs/project_name",
                "test_project_path": "project_src"
            }

        Run Django project tests using nose2 with a virtualenv:

            // this is your <ProjectName>.sublime-project file
            "settings": {
                "python_interpreter": "~/.virtualenvs/django_project_name",
                "test_command": "./manage.py test --settings=tests.settings --noinput"
            }
    */

    /*
        Theme to use in the output panel.

        Uncomment the line below to override the default tests runner
        output, by default the theme is PythonConsoleDark.hidden-tmTheme
        NOTE: The file specified here **MUST** exists in `Packages/Anaconda`
    */
    //"test_runner_theme": "PythonConsoleDark.hidden-tmTheme",

    /*
        Uncomment the line below to execute any command before try to execute
        your test suite. (if you need to run more than one command, just use a
        list of commands ["cmd1", "cmd2", ...])

    */
    // "test_before_command": "",

    /*
        Command to execute tests with. nosetests by default
    */
    "test_command": "nosetests",

    /*
        Uncomment the line below to execute any command after execute
        your test suite.
    */
    //"test_after_command": "",

    /*
        This is the delimiter between the module and the class.
    */
    "test_delimeter": ":",

    /*
        This is the delimiter between the class and the method.
    */
    "test_method_delimeter": ".",

    /*
        Whether to include full path of the test file/method.
    */
    "test_include_full_path": true,

    /*
        Uncomment the line below to enable filepath-based test runner
        patterns like those required for py.test.
    */
    // "test_filepath_patterns": true,

    /* Uncomment the line below to use a virtualenv for your tests */
    //"test_virtualenv": ""

    /*
        Uncomment the line below to add a top level path when you ask
        anaconda to run all your project tests.

        Note: this is need for example to can run tests with `twisted's trial`
    */
    // "test_project_path": "./"

    /*
    	Set this option to true if you get warnings about anaconda not
    	being able to connect to your localhost on ST3 startup but it
    	works normally after closing the error message.

    	NOTE: Ignoring errors may be dangerous.
     */

     /* Parameters to include after test_command specific to testing scope */
     "test_params": {
        "current_file_tests": "",
        "current_test": "",
        "project_tests": ""
    },
	"swallow_startup_errors": false,

    /*
        If this is set to true, anaconda will unload plugins that
        make it malfunction interfering with it
    */
    "auto_unload_conflictive_plugins": true
}

// vim: set ft=javascript:

LSP.sublime-settings

{
	"clients":
	{
		"ruby":
		{
			"command":
			[
				"/home/mihir/.rbenv/shims/solargraph",
				"socket"
			],
			"enabled": true,
			"languageId": "ruby",
			"scopes":
			[
				"source.ruby",
				"source.ruby.rails"
			],
			"syntaxes":
			[
				"Packages/Ruby/Ruby.sublime-syntax",
				"Packages/Rails/Ruby on Rails.sublime-syntax",
				"Packages/Rails/HTML (Rails).sublime-syntax"
			],
			"tcp_port": 7658,
			"initialize_timeout": 30,
		}
	}
}

Package%20Control.sublime-settings

{
	"bootstrapped": true,
	"in_process_packages":
	[
	],
	"installed_packages":
	[
		"A File Icon",
		"Agila Theme",
		"Alignment",
		"ayu",
		"Babel",
		"BracketHighlighter",
		"Emmet",
		"Git",
		"GitGutter",
		"JavaScript Enhancements",
		"LSP",
		"Package Control",
		"RuboCop",
		"Seti_UI",
		"SideBarEnhancements",
		"SublimeCodeIntel",
		"SublimeLinter",
		"SublimeLinter-eslint",
		"SublimeLinter-rubocop",
		"Sync Settings",
		"TerminalView",
		"Tomorrow Night Italics Color Scheme",
		"Zeal"
	]
}

Preferences.sublime-settings

{
	"color_scheme": "Packages/Color Scheme - Default/Monokai.sublime-color-scheme",
	"default_encoding": "UTF-8",
	"default_line_ending": "unix",
	"ensure_newline_at_eof_on_save": true,
	"folder_exclude_patterns":
	[
		".svn",
		".git",
		".hg",
		"CVS",
		"node_modules",
		".yarn",
		"tmp"
	],
	"font_size": 12,
	"ignored_packages":
	[
		"Vintage"
	],
	"linters":
	{
		"rubocop":
		{
			"use_bundle_exec": true
		}
	},
	"rulers":
	[
		80
	],
	"tab_size": 2,
	"theme": "ayu-mirage.sublime-theme",
	"translate_tabs_to_spaces": true,
	"trim_trailing_white_space_on_save": true,
	"word_wrap": "true"
}

RuboCop.sublime-settings

{
  // Here you can provide your own command line
  // which is used to run rubocop. The path will be
  // replaced by the file or folder which needs
  // to be checked.
  //
  // If check_for_rvm or check_for_rbenv is enabled,
  // it will be prefixed with a call to rvm or rbenv.
  // If none of them are enabled, the command will be
  // executed without any additions.
  "rubocop_command": "",

  // If you want use RVM to run RuboCop, just
  // set this to true.
  //
  // Note: If check_for_rvm and check_for_rbenv are both enabled,
  // the plugin will use RVM.
  "check_for_rvm": false,

  // The path to RVM's rvm-auto-ruby binary
  "rvm_auto_ruby_path":  "~/.rvm/bin/rvm-auto-ruby",

  // If you want to use rbenv to run RuboCop, just
  // set this to true.
  //
  // Note: If check_for_rvm and check_for_rbenv are both enabled,
  // the plugin will use RVM.
  "check_for_rbenv": true,

  // The path to rbenv's binary
  "rbenv_path":  "~/.rbenv/shims/rubocop",

  // If you want issues to be marked automatically inside the view
  // set this to true.
  //
  // Attention ST2 users: Using that functionality consumes a bit
  // of time, so ST2 might be a bit unresponsive when saving. As soon
  // as you encounter performance problems during saving a ruby file you
  // should set this to false.
  "mark_issues_in_view": true,

  // Auto correct feature warning message
  "show_auto_correct_warning": true,

  // Optional general config file for rubocop.
  "rubocop_config_file": ""
}

sublime-settings-sync

Zeal.sublime-settings

{
  /**
   *  Zeal executable path.
   *  For Linux: /usr/bin/zeal
   *  For Windows: c:\\Program Files\\Zeal\\zeal.exe
   */
  "zeal_command": "/usr/bin/zeal",

  /**
   *  Sort mapping results.
   */
  "mapping_sort" : true,

  /**
   * Language mapping.
   */
  "language_mapping": {
    "HTML": {"lang": "html", "zeal_lang": "html"},
    "JavaScript": {"lang": "javascript", "zeal_lang": "javascript"},
    "CSS": {"lang": "css", "zeal_lang": "css"},
    "PHP": {"lang": "php", "zeal_lang": "php"},
    "Python": {"lang": "python", "zeal_lang": "python"},
    // "Ruby": {"lang": "ruby", "zeal_lang":"ruby"}
    "Ruby": {"lang": "ruby", "zeal_lang": "ruby,rails"},
  }
}