Last active
January 7, 2022 05:41
-
-
Save mikejr83/6eb5cae9bff0883106e6812fc6ec1bde to your computer and use it in GitHub Desktop.
Start and End g-code for JGMaker Artist-D (for Cura)
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
G91 ;Relative positioning | |
G1 E-2 F2700 ;Retract a bit | |
G1 E-2 Z0.2 F2400 ;Retract and raise Z | |
G1 X5 Y5 F3000 ;Wipe out | |
G1 Z10 ;Raise Z more | |
G90 ;Absolute positionning | |
G28 X; Move extruders out of print area | |
G1 Y{machine_depth} ;Present print | |
M106 S0 ;Turn-off fan | |
M104 S0 ;Turn-off hotend | |
M140 S0 ;Turn-off bed | |
M84 X Y E ;Disable all steppers but Z |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
M140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature | |
M104 S{material_print_temperature_layer_0} ; Set Extruder temperature | |
G28 ;Home | |
M190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature | |
G1 Z15.0 F6000 ;Move the platform down 15mm | |
;Prime the extruder | |
G92 E0 ; Reset Extruder | |
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed | |
G1 X10 Y20 Z0.3 F5000.0 ; Move to start position | |
M109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature | |
G1 X10 Y200.0 Z0.2 F1500.0 E15 ; Draw the first line | |
G1 X10.3 Y200.0 Z0.2 F5000.0 ; Move to side a little | |
G1 X10.3 Y20 Z0.2 F1500.0 E30 ; Draw the second line | |
G92 E0 ; Reset Extruder | |
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed | |
G1 X14 Y20 Z0.2 F5000.0 ; Move over to prevent blob squish |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I love this Start sequence, the only thing I would add to the END is to move the Y to only 250 so it doesn't block the controls and I would move it a bit slower than the default travel move which can be jarring....
Oh Yes, I am trying to figure out how to play a short "I'm done "tune, but am not having luck with the M300 commands...