action_before_build.target.mk

# This file is generated by gyp; do not edit.

TOOLSET := target
TARGET := action_before_build
### Generated for copy rule.
$(obj)/gen/libmapboxgl.a: TOOLSET := $(TOOLSET)
$(obj)/gen/libmapboxgl.a: $(srcdir)/vendor/mapbox-gl-native/build/Release/libmapboxgl.a FORCE_DO_CMD
	$(call do_cmd,copy)

all_deps += $(obj)/gen/libmapboxgl.a
binding_gyp_action_before_build_target_copies = $(obj)/gen/libmapboxgl.a

### Rules for final target.
# Build our special outputs first.
$(obj).target/action_before_build.stamp: | $(binding_gyp_action_before_build_target_copies)

# Preserve order dependency of special output on deps.
$(binding_gyp_action_before_build_target_copies): | $(obj).target/make_mbgl.stamp

$(obj).target/action_before_build.stamp: TOOLSET := $(TOOLSET)
$(obj).target/action_before_build.stamp: $(obj).target/make_mbgl.stamp FORCE_DO_CMD
	$(call do_cmd,touch)

all_deps += $(obj).target/action_before_build.stamp
# Add target alias
.PHONY: action_before_build
action_before_build: $(obj).target/action_before_build.stamp

# Add target alias to "all" target.
.PHONY: all
all: action_before_build

binding.Makefile

# This file is generated by gyp; do not edit.

export builddir_name ?= ./build/.
.PHONY: all
all:
	$(MAKE) make_mbgl action_before_build mapbox-gl-native action_after_build

config.gypi

# Do not edit. File was generated by node-gyp's "configure" step
{
  "target_defaults": {
    "cflags": [],
    "default_configuration": "Release",
    "defines": [],
    "include_dirs": [],
    "libraries": []
  },
  "variables": {
    "clang": 1,
    "host_arch": "x64",
    "node_install_npm": "true",
    "node_prefix": "/",
    "node_shared_cares": "false",
    "node_shared_http_parser": "false",
    "node_shared_libuv": "false",
    "node_shared_openssl": "false",
    "node_shared_v8": "false",
    "node_shared_zlib": "false",
    "node_tag": "",
    "node_unsafe_optimizations": 0,
    "node_use_dtrace": "true",
    "node_use_etw": "false",
    "node_use_openssl": "true",
    "node_use_perfctr": "false",
    "python": "/usr/bin/python",
    "target_arch": "x64",
    "v8_enable_gdbjit": 0,
    "v8_no_strict_aliasing": 1,
    "v8_use_snapshot": "false",
    "want_separate_host_toolset": 0,
    "nodedir": "/Users/mikemorris/.node-gyp/0.10.30",
    "copy_dev_lib": "true",
    "standalone_static_library": 1
  }
}

make_mbgl.target.mk

# This file is generated by gyp; do not edit.

TOOLSET := target
TARGET := make_mbgl
### Rules for action "make_mbgl":
quiet_cmd_binding_gyp_make_mbgl_target_make_mbgl = ACTION binding_gyp_make_mbgl_target_make_mbgl $@
cmd_binding_gyp_make_mbgl_target_make_mbgl = LD_LIBRARY_PATH=$(builddir)/lib.host:$(builddir)/lib.target:$$LD_LIBRARY_PATH; export LD_LIBRARY_PATH; cd $(srcdir)/.; mkdir -p vendor/mapbox-gl-native/build/Release; ./scripts/make_mbgl.sh

vendor/mapbox-gl-native/build/Release/libmapboxgl.a: obj := $(abs_obj)
vendor/mapbox-gl-native/build/Release/libmapboxgl.a: builddir := $(abs_builddir)
vendor/mapbox-gl-native/build/Release/libmapboxgl.a: export BUILT_PRODUCTS_DIR := ${abs_builddir}
vendor/mapbox-gl-native/build/Release/libmapboxgl.a: export CONFIGURATION := ${BUILDTYPE}
vendor/mapbox-gl-native/build/Release/libmapboxgl.a: export PRODUCT_NAME := make_mbgl
vendor/mapbox-gl-native/build/Release/libmapboxgl.a: export SDKROOT := 
vendor/mapbox-gl-native/build/Release/libmapboxgl.a: export SRCROOT := ${abs_srcdir}/
vendor/mapbox-gl-native/build/Release/libmapboxgl.a: export SOURCE_ROOT := ${SRCROOT}
vendor/mapbox-gl-native/build/Release/libmapboxgl.a: export TARGET_BUILD_DIR := ${abs_builddir}
vendor/mapbox-gl-native/build/Release/libmapboxgl.a: export TEMP_DIR := ${TMPDIR}
vendor/mapbox-gl-native/build/Release/libmapboxgl.a: TOOLSET := $(TOOLSET)
vendor/mapbox-gl-native/build/Release/libmapboxgl.a: $(srcdir)/vendor/mapbox-gl-native FORCE_DO_CMD
	$(call do_cmd,binding_gyp_make_mbgl_target_make_mbgl)

all_deps += vendor/mapbox-gl-native/build/Release/libmapboxgl.a
action_binding_gyp_make_mbgl_target_make_mbgl_outputs := vendor/mapbox-gl-native/build/Release/libmapboxgl.a


### Rules for final target.
# Build our special outputs first.
$(obj).target/make_mbgl.stamp: | $(action_binding_gyp_make_mbgl_target_make_mbgl_outputs)

# Preserve order dependency of special output on deps.
$(action_binding_gyp_make_mbgl_target_make_mbgl_outputs): | 

$(obj).target/make_mbgl.stamp: TOOLSET := $(TOOLSET)
$(obj).target/make_mbgl.stamp:  FORCE_DO_CMD
	$(call do_cmd,touch)

all_deps += $(obj).target/make_mbgl.stamp
# Add target alias
.PHONY: make_mbgl
make_mbgl: $(obj).target/make_mbgl.stamp

# Add target alias to "all" target.
.PHONY: all
all: make_mbgl

Makefile

# We borrow heavily from the kernel build setup, though we are simpler since
# we don't have Kconfig tweaking settings on us.

# The implicit make rules have it looking for RCS files, among other things.
# We instead explicitly write all the rules we care about.
# It's even quicker (saves ~200ms) to pass -r on the command line.
MAKEFLAGS=-r

# The source directory tree.
srcdir := ..
abs_srcdir := $(abspath $(srcdir))

# The name of the builddir.
builddir_name ?= .

# The V=1 flag on command line makes us verbosely print command lines.
ifdef V
  quiet=
else
  quiet=quiet_
endif

# Specify BUILDTYPE=Release on the command line for a release build.
BUILDTYPE ?= Release

# Directory all our build output goes into.
# Note that this must be two directories beneath src/ for unit tests to pass,
# as they reach into the src/ directory for data with relative paths.
builddir ?= $(builddir_name)/$(BUILDTYPE)
abs_builddir := $(abspath $(builddir))
depsdir := $(builddir)/.deps

# Object output directory.
obj := $(builddir)/obj
abs_obj := $(abspath $(obj))

# We build up a list of every single one of the targets so we can slurp in the
# generated dependency rule Makefiles in one pass.
all_deps :=



CC.target ?= $(CC)
CFLAGS.target ?= $(CFLAGS)
CXX.target ?= $(CXX)
CXXFLAGS.target ?= $(CXXFLAGS)
LINK.target ?= $(LINK)
LDFLAGS.target ?= $(LDFLAGS)
AR.target ?= $(AR)

# C++ apps need to be linked with g++.
#
# Note: flock is used to seralize linking. Linking is a memory-intensive
# process so running parallel links can often lead to thrashing.  To disable
# the serialization, override LINK via an envrionment variable as follows:
#
#   export LINK=g++
#
# This will allow make to invoke N linker processes as specified in -jN.
LINK ?= ./gyp-mac-tool flock $(builddir)/linker.lock $(CXX.target)

# TODO(evan): move all cross-compilation logic to gyp-time so we don't need
# to replicate this environment fallback in make as well.
CC.host ?= gcc
CFLAGS.host ?=
CXX.host ?= g++
CXXFLAGS.host ?=
LINK.host ?= $(CXX.host)
LDFLAGS.host ?=
AR.host ?= ar

# Define a dir function that can handle spaces.
# http://www.gnu.org/software/make/manual/make.html#Syntax-of-Functions
# "leading spaces cannot appear in the text of the first argument as written.
# These characters can be put into the argument value by variable substitution."
empty :=
space := $(empty) $(empty)

# http://stackoverflow.com/questions/1189781/using-make-dir-or-notdir-on-a-path-with-spaces
replace_spaces = $(subst $(space),?,$1)
unreplace_spaces = $(subst ?,$(space),$1)
dirx = $(call unreplace_spaces,$(dir $(call replace_spaces,$1)))

# Flags to make gcc output dependency info.  Note that you need to be
# careful here to use the flags that ccache and distcc can understand.
# We write to a dep file on the side first and then rename at the end
# so we can't end up with a broken dep file.
depfile = $(depsdir)/$(call replace_spaces,$@).d
DEPFLAGS = -MMD -MF $(depfile).raw

# We have to fixup the deps output in a few ways.
# (1) the file output should mention the proper .o file.
# ccache or distcc lose the path to the target, so we convert a rule of
# the form:
#   foobar.o: DEP1 DEP2
# into
#   path/to/foobar.o: DEP1 DEP2
# (2) we want missing files not to cause us to fail to build.
# We want to rewrite
#   foobar.o: DEP1 DEP2 \
#               DEP3
# to
#   DEP1:
#   DEP2:
#   DEP3:
# so if the files are missing, they're just considered phony rules.
# We have to do some pretty insane escaping to get those backslashes
# and dollar signs past make, the shell, and sed at the same time.
# Doesn't work with spaces, but that's fine: .d files have spaces in
# their names replaced with other characters.
define fixup_dep
# The depfile may not exist if the input file didn't have any #includes.
touch $(depfile).raw
# Fixup path as in (1).
sed -e "s|^$(notdir $@)|$@|" $(depfile).raw >> $(depfile)
# Add extra rules as in (2).
# We remove slashes and replace spaces with new lines;
# remove blank lines;
# delete the first line and append a colon to the remaining lines.
sed -e 's|\\||' -e 'y| |\n|' $(depfile).raw |\
  grep -v '^$$'                             |\
  sed -e 1d -e 's|$$|:|'                     \
    >> $(depfile)
rm $(depfile).raw
endef

# Command definitions:
# - cmd_foo is the actual command to run;
# - quiet_cmd_foo is the brief-output summary of the command.

quiet_cmd_cc = CC($(TOOLSET)) $@
cmd_cc = $(CC.$(TOOLSET)) $(GYP_CFLAGS) $(DEPFLAGS) $(CFLAGS.$(TOOLSET)) -c -o $@ $<

quiet_cmd_cxx = CXX($(TOOLSET)) $@
cmd_cxx = $(CXX.$(TOOLSET)) $(GYP_CXXFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c -o $@ $<

quiet_cmd_objc = CXX($(TOOLSET)) $@
cmd_objc = $(CC.$(TOOLSET)) $(GYP_OBJCFLAGS) $(DEPFLAGS) -c -o $@ $<

quiet_cmd_objcxx = CXX($(TOOLSET)) $@
cmd_objcxx = $(CXX.$(TOOLSET)) $(GYP_OBJCXXFLAGS) $(DEPFLAGS) -c -o $@ $<

# Commands for precompiled header files.
quiet_cmd_pch_c = CXX($(TOOLSET)) $@
cmd_pch_c = $(CC.$(TOOLSET)) $(GYP_PCH_CFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c -o $@ $<
quiet_cmd_pch_cc = CXX($(TOOLSET)) $@
cmd_pch_cc = $(CC.$(TOOLSET)) $(GYP_PCH_CXXFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c -o $@ $<
quiet_cmd_pch_m = CXX($(TOOLSET)) $@
cmd_pch_m = $(CC.$(TOOLSET)) $(GYP_PCH_OBJCFLAGS) $(DEPFLAGS) -c -o $@ $<
quiet_cmd_pch_mm = CXX($(TOOLSET)) $@
cmd_pch_mm = $(CC.$(TOOLSET)) $(GYP_PCH_OBJCXXFLAGS) $(DEPFLAGS) -c -o $@ $<

# gyp-mac-tool is written next to the root Makefile by gyp.
# Use $(4) for the command, since $(2) and $(3) are used as flag by do_cmd
# already.
quiet_cmd_mac_tool = MACTOOL $(4) $<
cmd_mac_tool = ./gyp-mac-tool $(4) $< "$@"

quiet_cmd_mac_package_framework = PACKAGE FRAMEWORK $@
cmd_mac_package_framework = ./gyp-mac-tool package-framework "$@" $(4)

quiet_cmd_infoplist = INFOPLIST $@
cmd_infoplist = $(CC.$(TOOLSET)) -E -P -Wno-trigraphs -x c $(INFOPLIST_DEFINES) "$<" -o "$@"

quiet_cmd_touch = TOUCH $@
cmd_touch = touch $@

quiet_cmd_copy = COPY $@
# send stderr to /dev/null to ignore messages when linking directories.
cmd_copy = rm -rf "$@" && cp -af "$<" "$@"

quiet_cmd_alink = LIBTOOL-STATIC $@
cmd_alink = rm -f $@ && ./gyp-mac-tool filter-libtool libtool $(GYP_LIBTOOLFLAGS) -static -o $@ $(filter %.o,$^)

quiet_cmd_link = LINK($(TOOLSET)) $@
cmd_link = $(LINK.$(TOOLSET)) $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o "$@" $(LD_INPUTS) $(LIBS)

quiet_cmd_solink = SOLINK($(TOOLSET)) $@
cmd_solink = $(LINK.$(TOOLSET)) -shared $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o "$@" $(LD_INPUTS) $(LIBS)

quiet_cmd_solink_module = SOLINK_MODULE($(TOOLSET)) $@
cmd_solink_module = $(LINK.$(TOOLSET)) -bundle $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o $@ $(filter-out FORCE_DO_CMD, $^) $(LIBS)


# Define an escape_quotes function to escape single quotes.
# This allows us to handle quotes properly as long as we always use
# use single quotes and escape_quotes.
escape_quotes = $(subst ','\'',$(1))
# This comment is here just to include a ' to unconfuse syntax highlighting.
# Define an escape_vars function to escape '$' variable syntax.
# This allows us to read/write command lines with shell variables (e.g.
# $LD_LIBRARY_PATH), without triggering make substitution.
escape_vars = $(subst $$,$$$$,$(1))
# Helper that expands to a shell command to echo a string exactly as it is in
# make. This uses printf instead of echo because printf's behaviour with respect
# to escape sequences is more portable than echo's across different shells
# (e.g., dash, bash).
exact_echo = printf '%s\n' '$(call escape_quotes,$(1))'

# Helper to compare the command we're about to run against the command
# we logged the last time we ran the command.  Produces an empty
# string (false) when the commands match.
# Tricky point: Make has no string-equality test function.
# The kernel uses the following, but it seems like it would have false
# positives, where one string reordered its arguments.
#   arg_check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \
#                       $(filter-out $(cmd_$@), $(cmd_$(1))))
# We instead substitute each for the empty string into the other, and
# say they're equal if both substitutions produce the empty string.
# .d files contain ? instead of spaces, take that into account.
command_changed = $(or $(subst $(cmd_$(1)),,$(cmd_$(call replace_spaces,$@))),\
                       $(subst $(cmd_$(call replace_spaces,$@)),,$(cmd_$(1))))

# Helper that is non-empty when a prerequisite changes.
# Normally make does this implicitly, but we force rules to always run
# so we can check their command lines.
#   $? -- new prerequisites
#   $| -- order-only dependencies
prereq_changed = $(filter-out FORCE_DO_CMD,$(filter-out $|,$?))

# Helper that executes all postbuilds until one fails.
define do_postbuilds
  @E=0;\
  for p in $(POSTBUILDS); do\
    eval $$p;\
    E=$$?;\
    if [ $$E -ne 0 ]; then\
      break;\
    fi;\
  done;\
  if [ $$E -ne 0 ]; then\
    rm -rf "$@";\
    exit $$E;\
  fi
endef

# do_cmd: run a command via the above cmd_foo names, if necessary.
# Should always run for a given target to handle command-line changes.
# Second argument, if non-zero, makes it do asm/C/C++ dependency munging.
# Third argument, if non-zero, makes it do POSTBUILDS processing.
# Note: We intentionally do NOT call dirx for depfile, since it contains ? for
# spaces already and dirx strips the ? characters.
define do_cmd
$(if $(or $(command_changed),$(prereq_changed)),
  @$(call exact_echo,  $($(quiet)cmd_$(1)))
  @mkdir -p "$(call dirx,$@)" "$(dir $(depfile))"
  $(if $(findstring flock,$(word 2,$(cmd_$1))),
    @$(cmd_$(1))
    @echo "  $(quiet_cmd_$(1)): Finished",
    @$(cmd_$(1))
  )
  @$(call exact_echo,$(call escape_vars,cmd_$(call replace_spaces,$@) := $(cmd_$(1)))) > $(depfile)
  @$(if $(2),$(fixup_dep))
  $(if $(and $(3), $(POSTBUILDS)),
    $(call do_postbuilds)
  )
)
endef

# Declare the "all" target first so it is the default,
# even though we don't have the deps yet.
.PHONY: all
all:

# make looks for ways to re-generate included makefiles, but in our case, we
# don't have a direct way. Explicitly telling make that it has nothing to do
# for them makes it go faster.
%.d: ;

# Use FORCE_DO_CMD to force a target to run.  Should be coupled with
# do_cmd.
.PHONY: FORCE_DO_CMD
FORCE_DO_CMD:

TOOLSET := target
# Suffix rules, putting all outputs into $(obj).
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.c FORCE_DO_CMD
	@$(call do_cmd,cc,1)
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cc FORCE_DO_CMD
	@$(call do_cmd,cxx,1)
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cpp FORCE_DO_CMD
	@$(call do_cmd,cxx,1)
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cxx FORCE_DO_CMD
	@$(call do_cmd,cxx,1)
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.m FORCE_DO_CMD
	@$(call do_cmd,objc,1)
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.mm FORCE_DO_CMD
	@$(call do_cmd,objcxx,1)
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.S FORCE_DO_CMD
	@$(call do_cmd,cc,1)
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.s FORCE_DO_CMD
	@$(call do_cmd,cc,1)

# Try building from generated source, too.
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.c FORCE_DO_CMD
	@$(call do_cmd,cc,1)
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cc FORCE_DO_CMD
	@$(call do_cmd,cxx,1)
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cpp FORCE_DO_CMD
	@$(call do_cmd,cxx,1)
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cxx FORCE_DO_CMD
	@$(call do_cmd,cxx,1)
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.m FORCE_DO_CMD
	@$(call do_cmd,objc,1)
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.mm FORCE_DO_CMD
	@$(call do_cmd,objcxx,1)
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.S FORCE_DO_CMD
	@$(call do_cmd,cc,1)
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.s FORCE_DO_CMD
	@$(call do_cmd,cc,1)

$(obj).$(TOOLSET)/%.o: $(obj)/%.c FORCE_DO_CMD
	@$(call do_cmd,cc,1)
$(obj).$(TOOLSET)/%.o: $(obj)/%.cc FORCE_DO_CMD
	@$(call do_cmd,cxx,1)
$(obj).$(TOOLSET)/%.o: $(obj)/%.cpp FORCE_DO_CMD
	@$(call do_cmd,cxx,1)
$(obj).$(TOOLSET)/%.o: $(obj)/%.cxx FORCE_DO_CMD
	@$(call do_cmd,cxx,1)
$(obj).$(TOOLSET)/%.o: $(obj)/%.m FORCE_DO_CMD
	@$(call do_cmd,objc,1)
$(obj).$(TOOLSET)/%.o: $(obj)/%.mm FORCE_DO_CMD
	@$(call do_cmd,objcxx,1)
$(obj).$(TOOLSET)/%.o: $(obj)/%.S FORCE_DO_CMD
	@$(call do_cmd,cc,1)
$(obj).$(TOOLSET)/%.o: $(obj)/%.s FORCE_DO_CMD
	@$(call do_cmd,cc,1)


ifeq ($(strip $(foreach prefix,$(NO_LOAD),\
    $(findstring $(join ^,$(prefix)),\
                 $(join ^,action_after_build.target.mk)))),)
  include action_after_build.target.mk
endif
ifeq ($(strip $(foreach prefix,$(NO_LOAD),\
    $(findstring $(join ^,$(prefix)),\
                 $(join ^,action_before_build.target.mk)))),)
  include action_before_build.target.mk
endif
ifeq ($(strip $(foreach prefix,$(NO_LOAD),\
    $(findstring $(join ^,$(prefix)),\
                 $(join ^,make_mbgl.target.mk)))),)
  include make_mbgl.target.mk
endif
ifeq ($(strip $(foreach prefix,$(NO_LOAD),\
    $(findstring $(join ^,$(prefix)),\
                 $(join ^,mapbox-gl-native.target.mk)))),)
  include mapbox-gl-native.target.mk
endif

quiet_cmd_regen_makefile = ACTION Regenerating $@
cmd_regen_makefile = cd $(srcdir); /Users/mikemorris/.nvm/v0.10.30/lib/node_modules/node-gyp/gyp/gyp_main.py -fmake --ignore-environment "--toplevel-dir=." -I/Users/mikemorris/gyp/node-mapbox-gl-native/build/config.gypi -I/Users/mikemorris/.nvm/v0.10.30/lib/node_modules/node-gyp/addon.gypi -I/Users/mikemorris/.node-gyp/0.10.30/common.gypi "--depth=." "-Goutput_dir=." "--generator-output=build" "-Dlibrary=shared_library" "-Dvisibility=default" "-Dnode_root_dir=/Users/mikemorris/.node-gyp/0.10.30" "-Dmodule_root_dir=/Users/mikemorris/gyp/node-mapbox-gl-native" binding.gyp
Makefile: $(srcdir)/../../.nvm/v0.10.30/lib/node_modules/node-gyp/addon.gypi $(srcdir)/../../.node-gyp/0.10.30/common.gypi $(srcdir)/build/config.gypi $(srcdir)/binding.gyp
	$(call do_cmd,regen_makefile)

# "all" is a concatenation of the "all" targets from all the included
# sub-makefiles. This is just here to clarify.
all:

# Add in dependency-tracking rules.  $(all_deps) is the list of every single
# target in our tree. Only consider the ones with .d (dependency) info:
d_files := $(wildcard $(foreach f,$(all_deps),$(depsdir)/$(f).d))
ifneq ($(d_files),)
  include $(d_files)
endif

mapbox-gl-native.target.mk

# This file is generated by gyp; do not edit.

TOOLSET := target
TARGET := mapbox-gl-native
DEFS_Debug := \
	'-D_DARWIN_USE_64_BIT_INODE=1' \
	'-D_LARGEFILE_SOURCE' \
	'-D_FILE_OFFSET_BITS=64' \
	'-DBUILDING_NODE_EXTENSION' \
	'-DDEBUG' \
	'-D_DEBUG'

# Flags passed to all source files.
CFLAGS_Debug := \
	-O0 \
	-gdwarf-2 \
	-mmacosx-version-min=10.8 \
	-arch x86_64 \
	-Wall \
	-Wendif-labels \
	-W \
	-Wno-unused-parameter

# Flags passed to only C files.
CFLAGS_C_Debug := \
	-fno-strict-aliasing

# Flags passed to only C++ files.
CFLAGS_CC_Debug := \
	-fno-threadsafe-statics \
	-Wshadow \
	-std=c++11 \
	-stdlib=libc++ \
	-Wno-unused-variable

# Flags passed to only ObjC files.
CFLAGS_OBJC_Debug :=

# Flags passed to only ObjC++ files.
CFLAGS_OBJCC_Debug :=

INCS_Debug := \
	-I/Users/mikemorris/.node-gyp/0.10.30/src \
	-I/Users/mikemorris/.node-gyp/0.10.30/deps/uv/include \
	-I/Users/mikemorris/.node-gyp/0.10.30/deps/v8/include \
	-I$(srcdir)/include \
	-I$(srcdir)/vendor/mapbox-gl-native/include \
	-I$(srcdir)/vendor/mapbox-gl-native/common \
	-I$(srcdir)/node_modules/nan

DEFS_Release := \
	'-D_DARWIN_USE_64_BIT_INODE=1' \
	'-D_LARGEFILE_SOURCE' \
	'-D_FILE_OFFSET_BITS=64' \
	'-DBUILDING_NODE_EXTENSION'

# Flags passed to all source files.
CFLAGS_Release := \
	-Os \
	-gdwarf-2 \
	-mmacosx-version-min=10.8 \
	-arch x86_64 \
	-Wall \
	-Wendif-labels \
	-W \
	-Wno-unused-parameter

# Flags passed to only C files.
CFLAGS_C_Release := \
	-fno-strict-aliasing

# Flags passed to only C++ files.
CFLAGS_CC_Release := \
	-fno-threadsafe-statics \
	-Wshadow \
	-std=c++11 \
	-stdlib=libc++ \
	-Wno-unused-variable

# Flags passed to only ObjC files.
CFLAGS_OBJC_Release :=

# Flags passed to only ObjC++ files.
CFLAGS_OBJCC_Release :=

INCS_Release := \
	-I/Users/mikemorris/.node-gyp/0.10.30/src \
	-I/Users/mikemorris/.node-gyp/0.10.30/deps/uv/include \
	-I/Users/mikemorris/.node-gyp/0.10.30/deps/v8/include \
	-I$(srcdir)/include \
	-I$(srcdir)/vendor/mapbox-gl-native/include \
	-I$(srcdir)/vendor/mapbox-gl-native/common \
	-I$(srcdir)/node_modules/nan

OBJS := \
	$(obj).target/$(TARGET)/src/node_mbgl.o \
	$(obj).target/$(TARGET)/src/render_tile.o \
	$(obj).target/$(TARGET)/src/tile_worker.o \
	$(obj).target/$(TARGET)/vendor/mapbox-gl-native/common/headless_view.o

# Add to the list of files we specially track dependencies for.
all_deps += $(OBJS)

# Make sure our dependencies are built before any of us.
$(OBJS): | $(obj).target/action_before_build.stamp $(obj).target/make_mbgl.stamp

# CFLAGS et al overrides must be target-local.
# See "Target-specific Variable Values" in the GNU Make manual.
$(OBJS): TOOLSET := $(TOOLSET)
$(OBJS): GYP_CFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE))  $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_C_$(BUILDTYPE))
$(OBJS): GYP_CXXFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE))  $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_CC_$(BUILDTYPE))
$(OBJS): GYP_OBJCFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE))  $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_C_$(BUILDTYPE)) $(CFLAGS_OBJC_$(BUILDTYPE))
$(OBJS): GYP_OBJCXXFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE))  $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_CC_$(BUILDTYPE)) $(CFLAGS_OBJCC_$(BUILDTYPE))

# Suffix rules, putting all outputs into $(obj).

$(obj).$(TOOLSET)/$(TARGET)/%.o: $(srcdir)/%.cpp FORCE_DO_CMD
	@$(call do_cmd,cxx,1)

# Try building from generated source, too.

$(obj).$(TOOLSET)/$(TARGET)/%.o: $(obj).$(TOOLSET)/%.cpp FORCE_DO_CMD
	@$(call do_cmd,cxx,1)

$(obj).$(TOOLSET)/$(TARGET)/%.o: $(obj)/%.cpp FORCE_DO_CMD
	@$(call do_cmd,cxx,1)

# End of this set of suffix rules
### Rules for final target.
LDFLAGS_Debug := \
	-Wl,-search_paths_first \
	-mmacosx-version-min=10.8 \
	-arch x86_64 \
	-L$(builddir)

LIBTOOLFLAGS_Debug := \
	-Wl,-search_paths_first

LDFLAGS_Release := \
	-Wl,-search_paths_first \
	-mmacosx-version-min=10.8 \
	-arch x86_64 \
	-L$(builddir)

LIBTOOLFLAGS_Release := \
	-Wl,-search_paths_first

LIBS := \
	-undefined dynamic_lookup \
	$(obj)/gen/libmapboxgl.a

$(builddir)/mapbox-gl-native.node: GYP_LDFLAGS := $(LDFLAGS_$(BUILDTYPE))
$(builddir)/mapbox-gl-native.node: LIBS := $(LIBS)
$(builddir)/mapbox-gl-native.node: GYP_LIBTOOLFLAGS := $(LIBTOOLFLAGS_$(BUILDTYPE))
$(builddir)/mapbox-gl-native.node: TOOLSET := $(TOOLSET)
$(builddir)/mapbox-gl-native.node: $(OBJS) FORCE_DO_CMD
	$(call do_cmd,solink_module)

all_deps += $(builddir)/mapbox-gl-native.node
# Add target alias
.PHONY: mapbox-gl-native
mapbox-gl-native: $(builddir)/mapbox-gl-native.node

# Short alias for building this executable.
.PHONY: mapbox-gl-native.node
mapbox-gl-native.node: $(builddir)/mapbox-gl-native.node

# Add executable to "all" target.
.PHONY: all
all: $(builddir)/mapbox-gl-native.node