Skip to content

Instantly share code, notes, and snippets.

@missing233

missing233/993-bnx2x_warpcore_8727_2_5g_sgmii_txfault-510.patch

Created February 19, 2024 03:45
Show Gist options
  • Save missing233/2017e17c5000aae4d76d5a7f31bb6ad9 to your computer and use it in GitHub Desktop.
Save missing233/2017e17c5000aae4d76d5a7f31bb6ad9 to your computer and use it in GitHub Desktop.
Download ZIP
openwrt/target/linux/x86/patches-5.15/
Raw
993-bnx2x_warpcore_8727_2_5g_sgmii_txfault-510.patch
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1592,6 +1592,7 @@ struct bnx2x {
uint num_ethernet_queues;
uint num_cnic_queues;
int disable_tpa;
+ int mask_tx_fault;
u32 rx_mode;
#define BNX2X_RX_MODE_NONE 0
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -151,6 +151,7 @@ typedef int (*read_sfp_module_eeprom_fun
#define SFP_EEPROM_CON_TYPE_ADDR 0x2
#define SFP_EEPROM_CON_TYPE_VAL_UNKNOWN 0x0
+ #define SFP_EEPROM_CON_TYPE_VAL_SC 0x1
#define SFP_EEPROM_CON_TYPE_VAL_LC 0x7
#define SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21
#define SFP_EEPROM_CON_TYPE_VAL_RJ45 0x22
@@ -4210,6 +4211,16 @@ static void bnx2x_warpcore_set_sgmii_spe
0x1000);
DP(NETIF_MSG_LINK, "set SGMII AUTONEG\n");
} else {
+ /* Note that 2.5G works only when used with 1G advertisment */
+ if (fiber_mode && (phy->req_line_speed == SPEED_2500) &&
+ (phy->speed_cap_mask &
+ (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))) {
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_SERDESDIGITAL_MISC1,
+ 0x6010);
+ }
+
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16);
val16 &= 0xcebf;
@@ -4220,6 +4231,7 @@ static void bnx2x_warpcore_set_sgmii_spe
val16 |= 0x2000;
break;
case SPEED_1000:
+ case SPEED_2500:
val16 |= 0x0040;
break;
default:
@@ -8172,6 +8184,7 @@ static int bnx2x_get_edc_mode(struct bnx
break;
}
case SFP_EEPROM_CON_TYPE_VAL_UNKNOWN:
+ case SFP_EEPROM_CON_TYPE_VAL_SC:
case SFP_EEPROM_CON_TYPE_VAL_LC:
case SFP_EEPROM_CON_TYPE_VAL_RJ45:
check_limiting_mode = 1;
@@ -8182,7 +8195,8 @@ static int bnx2x_get_edc_mode(struct bnx
(val[SFP_EEPROM_1G_COMP_CODE_ADDR] != 0)) {
DP(NETIF_MSG_LINK, "1G SFP module detected\n");
phy->media_type = ETH_PHY_SFP_1G_FIBER;
- if (phy->req_line_speed != SPEED_1000) {
+ if ((phy->req_line_speed != SPEED_1000) &&
+ (phy->req_line_speed != SPEED_2500)) {
u8 gport = params->port;
phy->req_line_speed = SPEED_1000;
if (!CHIP_IS_E1x(bp)) {
@@ -9236,6 +9250,7 @@ static void bnx2x_8727_config_speed(stru
u16 tmp1, val;
/* Set option 1G speed */
if ((phy->req_line_speed == SPEED_1000) ||
+ (phy->req_line_speed == SPEED_2500) ||
(phy->media_type == ETH_PHY_SFP_1G_FIBER)) {
DP(NETIF_MSG_LINK, "Setting 1G force\n");
bnx2x_cl45_write(bp, phy,
@@ -9245,6 +9260,22 @@ static void bnx2x_8727_config_speed(stru
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, &tmp1);
DP(NETIF_MSG_LINK, "1.7 = 0x%x\n", tmp1);
+ if ((phy->req_line_speed == SPEED_2500) &&
+ (phy->speed_cap_mask &
+ (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))) {
+ bnx2x_cl45_read_and_write(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8727_MISC_CTRL2,
+ ~(1<<5));
+ bnx2x_cl45_write(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8727_MISC_CTRL1, 0x0010);
+ } else {
+ bnx2x_cl45_write(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8727_MISC_CTRL1, 0x001C);
+ }
/* Power down the XAUI until link is up in case of dual-media
* and 1G
*/
@@ -9266,7 +9297,7 @@ static void bnx2x_8727_config_speed(stru
DP(NETIF_MSG_LINK, "Setting 1G clause37\n");
bnx2x_cl45_write(bp, phy,
- MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL, 0);
+ MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL2, 0);
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1300);
} else {
@@ -9274,9 +9305,12 @@ static void bnx2x_8727_config_speed(stru
* registers although it is default
*/
bnx2x_cl45_write(bp, phy,
- MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL,
+ MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL2,
0x0020);
bnx2x_cl45_write(bp, phy,
+ MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL1,
+ 0x001C);
+ bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x0100);
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040);
@@ -9565,6 +9599,11 @@ static u8 bnx2x_8727_read_status(struct
vars->line_speed = SPEED_10000;
DP(NETIF_MSG_LINK, "port %x: External link up in 10G\n",
params->port);
+ } else if ((link_status & (1<<1)) && (!(link_status & (1<<14)))) {
+ link_up = 1;
+ vars->line_speed = SPEED_2500;
+ DP(NETIF_MSG_LINK, "port %x: External link up in 2.5G\n",
+ params->port);
} else if ((link_status & (1<<0)) && (!(link_status & (1<<13)))) {
link_up = 1;
vars->line_speed = SPEED_1000;
@@ -9596,7 +9635,8 @@ static u8 bnx2x_8727_read_status(struct
}
if ((DUAL_MEDIA(params)) &&
- (phy->req_line_speed == SPEED_1000)) {
+ ((phy->req_line_speed == SPEED_1000) ||
+ (phy->req_line_speed == SPEED_2500))) {
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8727_PCS_GP, &val1);
@@ -11720,6 +11760,7 @@ static const struct bnx2x_phy phy_warpco
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_1000baseKX_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_10000baseKR_Full |
SUPPORTED_20000baseKR2_Full |
@@ -11906,6 +11947,7 @@ static const struct bnx2x_phy phy_8727 =
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
.supported = (SUPPORTED_10000baseT_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
@@ -12253,6 +12295,7 @@ static int bnx2x_populate_int_phy(struct
break;
case PORT_HW_CFG_NET_SERDES_IF_SFI:
phy->supported &= (SUPPORTED_1000baseT_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
@@ -13937,7 +13980,8 @@ void bnx2x_period_func(struct link_param
& PORT_HW_CFG_NET_SERDES_IF_MASK) ==
PORT_HW_CFG_NET_SERDES_IF_SFI) {
if (bnx2x_is_sfp_module_plugged(phy, params)) {
- bnx2x_sfp_tx_fault_detection(phy, params, vars);
+ if(!((params->port + 1) & bp->mask_tx_fault))
+ bnx2x_sfp_tx_fault_detection(phy, params, vars);
} else if (vars->link_status &
LINK_STATUS_SFP_TX_FAULT) {
/* Clean trail, interrupt corrects the leds */
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -113,6 +113,10 @@ static int disable_tpa;
module_param(disable_tpa, int, 0444);
MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature");
+static int mask_tx_fault;
+module_param(mask_tx_fault, int, 0444);
+MODULE_PARM_DESC(mask_tx_fault, " Mask SFP TX fault detection");
+
static int int_mode;
module_param(int_mode, int, 0444);
MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X "
@@ -12389,6 +12393,8 @@ static int bnx2x_init_bp(struct bnx2x *b
if (BP_NOMCP(bp) && (func == 0))
dev_err(&bp->pdev->dev, "MCP disabled, must load devices in order!\n");
+ bp->mask_tx_fault = mask_tx_fault;
+
bp->disable_tpa = disable_tpa;
bp->disable_tpa |= !!IS_MF_STORAGE_ONLY(bp);
/* Reduce memory usage in kdump environment by disabling TPA */
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -7169,7 +7169,8 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_PMA_REG_8727_PCS_GP 0xc842
#define MDIO_PMA_REG_8727_OPT_CFG_REG 0xc8e4
-#define MDIO_AN_REG_8727_MISC_CTRL 0x8309
+#define MDIO_AN_REG_8727_MISC_CTRL1 0x8308
+#define MDIO_AN_REG_8727_MISC_CTRL2 0x8309
#define MDIO_PMA_REG_8073_CHIP_REV 0xc801
#define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820
Raw
993-bnx2x_warpcore_8727_2_5g_sgmii_txfault-515.patch
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1592,6 +1592,7 @@ struct bnx2x {
uint num_ethernet_queues;
uint num_cnic_queues;
int disable_tpa;
+ int mask_tx_fault;
u32 rx_mode;
#define BNX2X_RX_MODE_NONE 0
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -151,6 +151,7 @@ typedef int (*read_sfp_module_eeprom_fun
#define SFP_EEPROM_CON_TYPE_ADDR 0x2
#define SFP_EEPROM_CON_TYPE_VAL_UNKNOWN 0x0
+ #define SFP_EEPROM_CON_TYPE_VAL_SC 0x1
#define SFP_EEPROM_CON_TYPE_VAL_LC 0x7
#define SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21
#define SFP_EEPROM_CON_TYPE_VAL_RJ45 0x22
@@ -4210,6 +4211,16 @@ static void bnx2x_warpcore_set_sgmii_spe
0x1000);
DP(NETIF_MSG_LINK, "set SGMII AUTONEG\n");
} else {
+ /* Note that 2.5G works only when used with 1G advertisment */
+ if (fiber_mode && (phy->req_line_speed == SPEED_2500) &&
+ (phy->speed_cap_mask &
+ (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))) {
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_SERDESDIGITAL_MISC1,
+ 0x6010);
+ }
+
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16);
val16 &= 0xcebf;
@@ -4220,6 +4231,7 @@ static void bnx2x_warpcore_set_sgmii_spe
val16 |= 0x2000;
break;
case SPEED_1000:
+ case SPEED_2500:
val16 |= 0x0040;
break;
default:
@@ -8172,6 +8184,7 @@ static int bnx2x_get_edc_mode(struct bnx
break;
}
case SFP_EEPROM_CON_TYPE_VAL_UNKNOWN:
+ case SFP_EEPROM_CON_TYPE_VAL_SC:
case SFP_EEPROM_CON_TYPE_VAL_LC:
case SFP_EEPROM_CON_TYPE_VAL_RJ45:
check_limiting_mode = 1;
@@ -8182,7 +8195,8 @@ static int bnx2x_get_edc_mode(struct bnx
(val[SFP_EEPROM_1G_COMP_CODE_ADDR] != 0)) {
DP(NETIF_MSG_LINK, "1G SFP module detected\n");
phy->media_type = ETH_PHY_SFP_1G_FIBER;
- if (phy->req_line_speed != SPEED_1000) {
+ if ((phy->req_line_speed != SPEED_1000) &&
+ (phy->req_line_speed != SPEED_2500)) {
u8 gport = params->port;
phy->req_line_speed = SPEED_1000;
if (!CHIP_IS_E1x(bp)) {
@@ -8342,7 +8356,7 @@ static int bnx2x_wait_for_sfp_module_ini
* some phys type ( e.g. JDSU )
*/
- for (timeout = 0; timeout < 60; timeout++) {
+ for (timeout = 0; timeout < 1800; timeout++) {
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
rc = bnx2x_warpcore_read_sfp_module_eeprom(
phy, params, I2C_DEV_ADDR_A0, 1, 1, &val,
@@ -9236,6 +9250,7 @@ static void bnx2x_8727_config_speed(stru
u16 tmp1, val;
/* Set option 1G speed */
if ((phy->req_line_speed == SPEED_1000) ||
+ (phy->req_line_speed == SPEED_2500) ||
(phy->media_type == ETH_PHY_SFP_1G_FIBER)) {
DP(NETIF_MSG_LINK, "Setting 1G force\n");
bnx2x_cl45_write(bp, phy,
@@ -9245,6 +9260,22 @@ static void bnx2x_8727_config_speed(stru
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, &tmp1);
DP(NETIF_MSG_LINK, "1.7 = 0x%x\n", tmp1);
+ if ((phy->req_line_speed == SPEED_2500) &&
+ (phy->speed_cap_mask &
+ (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))) {
+ bnx2x_cl45_read_and_write(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8727_MISC_CTRL2,
+ ~(1<<5));
+ bnx2x_cl45_write(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8727_MISC_CTRL1, 0x0010);
+ } else {
+ bnx2x_cl45_write(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_8727_MISC_CTRL1, 0x001C);
+ }
/* Power down the XAUI until link is up in case of dual-media
* and 1G
*/
@@ -9266,7 +9297,7 @@ static void bnx2x_8727_config_speed(stru
DP(NETIF_MSG_LINK, "Setting 1G clause37\n");
bnx2x_cl45_write(bp, phy,
- MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL, 0);
+ MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL2, 0);
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1300);
} else {
@@ -9274,9 +9305,12 @@ static void bnx2x_8727_config_speed(stru
* registers although it is default
*/
bnx2x_cl45_write(bp, phy,
- MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL,
+ MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL2,
0x0020);
bnx2x_cl45_write(bp, phy,
+ MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL1,
+ 0x001C);
+ bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x0100);
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040);
@@ -9565,6 +9599,11 @@ static u8 bnx2x_8727_read_status(struct
vars->line_speed = SPEED_10000;
DP(NETIF_MSG_LINK, "port %x: External link up in 10G\n",
params->port);
+ } else if ((link_status & (1<<1)) && (!(link_status & (1<<14)))) {
+ link_up = 1;
+ vars->line_speed = SPEED_2500;
+ DP(NETIF_MSG_LINK, "port %x: External link up in 2.5G\n",
+ params->port);
} else if ((link_status & (1<<0)) && (!(link_status & (1<<13)))) {
link_up = 1;
vars->line_speed = SPEED_1000;
@@ -9596,7 +9635,8 @@ static u8 bnx2x_8727_read_status(struct
}
if ((DUAL_MEDIA(params)) &&
- (phy->req_line_speed == SPEED_1000)) {
+ ((phy->req_line_speed == SPEED_1000) ||
+ (phy->req_line_speed == SPEED_2500))) {
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8727_PCS_GP, &val1);
@@ -11720,6 +11760,7 @@ static const struct bnx2x_phy phy_warpco
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_1000baseKX_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_10000baseKR_Full |
SUPPORTED_20000baseKR2_Full |
@@ -11906,6 +11947,7 @@ static const struct bnx2x_phy phy_8727 =
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
.supported = (SUPPORTED_10000baseT_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
@@ -12253,6 +12295,7 @@ static int bnx2x_populate_int_phy(struct
break;
case PORT_HW_CFG_NET_SERDES_IF_SFI:
phy->supported &= (SUPPORTED_1000baseT_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
@@ -13937,7 +13980,8 @@ void bnx2x_period_func(struct link_param
& PORT_HW_CFG_NET_SERDES_IF_MASK) ==
PORT_HW_CFG_NET_SERDES_IF_SFI) {
if (bnx2x_is_sfp_module_plugged(phy, params)) {
- bnx2x_sfp_tx_fault_detection(phy, params, vars);
+ if(!((params->port + 1) & bp->mask_tx_fault))
+ bnx2x_sfp_tx_fault_detection(phy, params, vars);
} else if (vars->link_status &
LINK_STATUS_SFP_TX_FAULT) {
/* Clean trail, interrupt corrects the leds */
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -113,6 +113,10 @@ static int disable_tpa;
module_param(disable_tpa, int, 0444);
MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature");
+static int mask_tx_fault;
+module_param(mask_tx_fault, int, 0444);
+MODULE_PARM_DESC(mask_tx_fault, " Mask SFP TX fault detection");
+
static int int_mode;
module_param(int_mode, int, 0444);
MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X "
@@ -12336,6 +12340,8 @@ static int bnx2x_init_bp(struct bnx2x *b
if (BP_NOMCP(bp) && (func == 0))
dev_err(&bp->pdev->dev, "MCP disabled, must load devices in order!\n");
+ bp->mask_tx_fault = mask_tx_fault;
+
bp->disable_tpa = disable_tpa;
bp->disable_tpa |= !!IS_MF_STORAGE_ONLY(bp);
/* Reduce memory usage in kdump environment by disabling TPA */
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -7169,7 +7169,8 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_PMA_REG_8727_PCS_GP 0xc842
#define MDIO_PMA_REG_8727_OPT_CFG_REG 0xc8e4
-#define MDIO_AN_REG_8727_MISC_CTRL 0x8309
+#define MDIO_AN_REG_8727_MISC_CTRL1 0x8308
+#define MDIO_AN_REG_8727_MISC_CTRL2 0x8309
#define MDIO_PMA_REG_8073_CHIP_REV 0xc801
#define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment