Radxa ROCK3 OpenWrt boot log

gistfile1.txt

U-Boot SPL 2022.07-rc2-OpenWrt-r0-7cf6786 (May 30 2022 - 19:50:37 +0000)
Trying to boot from MMC1
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-13�-gcda1658bc-dirty:xsf
NOTICE:  BL31: Built : 14:19:26, Jun  1 2021
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    pmu v1 is valid
INFO:    dfs DDR fsp_param[0].freq_mhz= 1560MHz
INFO:    dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO:    dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO:    dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask> 0
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0xa00000
INFO:    SPSR = 0x3c9


U-Boot 2022.07-rc2-OpenWrt-r0-7cf6786 (May 30 2022 - 19:50:37 +0000) OpenWrt

Model: Radxa ROCK3 Model A
DRAM:  rockchip_sdram_size fdc20208 10000af1
rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0
SDRAM base=0, size=100000000
3.7 GiB
Core:  279 devices, 21 uclasses, devicetree: separate
MMC:   mmc@fe2b0000: 1, mmc@fe310000: 0
Loading Environment from nowhere... OK
In:    serial@fe660000
Out:   serial@fe660000
Err:   serial@fe660000
Model: Radxa ROCK3 Model A
can't get vref-supply: -2
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net:   No ethernet found.
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
352 bytes read in 2 ms (171.9 KiB/s)
## Executing script at 00c00000
55809 bytes read in 7 ms (7.6 MiB/s)
16881672 bytes read in 1400 ms (11.5 MiB/s)
Moving Image from 0x2080000 to 0x2200000, end=32f0000
## Flattened Device Tree blob at 0a100000
   Booting using the fdt blob at 0xa100000
   Loading Device Tree to 00000000edeef000, end 00000000edeffa00 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.18 (runner@fv-az36-646) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r0-7cf6786) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP PREEMPT Mon May 30 19:50:37 2022
[    0.000000] Machine model: Radxa ROCK3 Model A
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000efffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] cma: Reserved 8 MiB at 0x00000000ef000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 18 pages/cpu s34664 r8192 d30872 u73728
[    0.000000] pcpu-alloc: s34664 r8192 d30872 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: patching kernel code
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 967176
[    0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio32,0xfe660000 root=PARTUUID=5452574f-02 rw rootwait
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 3828608K/3930112K available (9536K kernel code, 2406K rwdata, 2612K rodata, 1792K init, 797K bss, 93312K reserved, 8192K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 320 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: MBI range [296:319]
[    0.000000] GICv3: Using MBI frame 0x00000000fd410000
[    0.000000] Root IRQ handler: gi�h�
[    0.000000] 
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] random: get_random_bytes called from ���k��l+0x3e0/0x524 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001452] Console: colour dummy device 80x25
[    0.001941] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.002952] pid_max: default: 32768 minimum: 301
[    0.003620] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.004374] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.006800] cblist_init_generic: Setting adjustable number of callback queues.
[    0.007520] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.008222] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.009030] rcu: Hierarchical SRCU implementation.
[    0.009797] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.011354] smp: Bringing up secondary CPUs ...
[    0.012410] Detected VIPT I-cache on CPU1
[    0.012455] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[    0.012512] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.013213] Detected VIPT I-cache on CPU2
[    0.013253] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[    0.013295] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.014021] Detected VIPT I-cache on CPU3
[    0.014059] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[    0.014098] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.014200] smp: Brought up 1 node, 4 CPUs
[    0.019756] SMP: Total of 4 processors activated.
[    0.020220] CPU features: detected: 32-bit EL0 Support
[    0.020724] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.021566] CPU features: detected: Common not Private translations
[    0.022218] CPU features: detected: CRC32 instructions
[    0.022729] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023291] CPU features: detected: Privileged Access Never
[    0.023836] CPU features: detected: RAS Extension Support
[    0.024366] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.025371] CPU: All CPU(s) started at EL2
[    0.037182] KASLR disabled due to lack of seed
[    0.037768] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.038764] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.039820] pinctrl core: initialized pinctrl subsystem
[    0.041461] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.043801] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.044797] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.045832] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.048395] thermal_sys: Registered thermal governor 'step_wise'
[    0.048406] thermal_sys: Registered thermal governor 'power_allocator'
[    0.049478] cpuidle: using governor menu
[    0.050620] ASID allocator initialised with 65536 entries
[    0.051314] Serial: AMBA PL011 UART driver
[    0.062807] platform fe0a0000.hdmi: Fixing up cyclic dependency with fe040000.vop
[    0.077726] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
[    0.078946] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
[    0.080132] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
[    0.081419] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
[    0.082588] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
[    0.086278] platform hdmi-con: Fixing up cyclic dependency with fe0a0000.hdmi
[    0.097940] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.098615] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.099275] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.099960] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.106103] iommu: Default domain type: Translated 
[    0.106599] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.107488] SCSI subsystem initialized
[    0.108132] libata version 3.00 loaded.
[    0.108356] usbcore: registered new interface driver usbfs
[    0.108945] usbcore: registered new interface driver hub
[    0.109505] usbcore: registered new device driver usb
[    0.110375] pps_core: LinuxPPS API ver. 1 registered
[    0.110868] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.111772] PTP clock support registered
[    0.112601] ARM FF-A: FFA_VERSION returned not supported
[    0.113287] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16
[    0.114147] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    0.114854] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    0.117133] clocksource: Switched to clocksource arch_sys_counter
[    0.117980] VFS: Disk quotas dquot_6.6.0
[    0.118422] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.123094] NET: Registered PF_INET protocol family
[    0.123863] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.126818] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.127762] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.128802] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.130009] TCP: Hash tables configured (established 32768 bind 32768)
[    0.130771] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.131512] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.132425] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.133012] PCI: CLS 0 bytes, default 64
[    0.134748] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.141926] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.142506] ntfs: driver 2.1.32 [Flags: R/W].
[    0.143166] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.145634] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.146544] io scheduler mq-deadline registered
[    0.155799] rockchip-snps-pcie3-phy fe8c0000.phy: failed to find rockchip,pipe_grf regmap
[    0.158281] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.159686] rockchip-dw-pcie 3c0000000.pcie: bifurcation: false
[    0.160474] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges:
[    0.161257] rockchip-dw-pcie 3c0000000.pcie:       IO 0x0301000000..0x03010fffff -> 0x0001000000
[    0.162136] rockchip-dw-pcie 3c0000000.pcie:      MEM 0x0301100000..0x033fffffff -> 0x0002000000
[    0.163114] rockchip-dw-pcie 3c0000000.pcie: iATU unroll: enabled
[    0.163716] rockchip-dw-pcie 3c0000000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[    1.269374] rockchip-dw-pcie 3c0000000.pcie: Phy link never came up
[    1.270125] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00
[    1.270816] pci_bus 0000:00: root bus resource [bus 00-0f]
[    1.271364] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0x1000000-0x10fffff])
[    1.272287] pci_bus 0000:00: root bus resource [mem 0x301100000-0x33fffffff] (bus address [0x02000000-0x40efffff])
[    1.273374] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400
[    1.273997] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    1.274729] pci 0000:00:00.0: supports D1 D2
[    1.275154] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.280627] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
[    1.286091] pci 0000:00:00.0: BAR 6: assigned [mem 0x301100000-0x30110ffff pref]
[    1.286830] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    1.288955] pcieport 0000:00:00.0: PME: Signaling with IRQ 57
[    1.289948] pcieport 0000:00:00.0: AER: enabled with IRQ 57
[    1.291263] rockchip-dw-pcie 3c0800000.pcie: bifurcation: false
[    1.292049] rockchip-dw-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges:
[    1.292801] rockchip-dw-pcie 3c0800000.pcie:       IO 0x0381000000..0x03810fffff -> 0x0001000000
[    1.293719] rockchip-dw-pcie 3c0800000.pcie:      MEM 0x0381100000..0x03bfffffff -> 0x0002000000
[    1.303761] rockchip-dw-pcie 3c0800000.pcie: iATU unroll: enabled
[    1.304366] rockchip-dw-pcie 3c0800000.pcie: Detected iATU regions: 8 outbound, 8 inbound
[    2.413359] rockchip-dw-pcie 3c0800000.pcie: Phy link never came up
[    2.414105] rockchip-dw-pcie 3c0800000.pcie: PCI host bridge to bus 0002:20
[    2.414797] pci_bus 0002:20: root bus resource [bus 20-2f]
[    2.415345] pci_bus 0002:20: root bus resource [io  0x100000-0x1fffff] (bus address [0x1000000-0x10fffff])
[    2.416293] pci_bus 0002:20: root bus resource [mem 0x381100000-0x3bfffffff] (bus address [0x02000000-0x40efffff])
[    2.417373] pci 0002:20:00.0: [1d87:3566] type 01 class 0x060400
[    2.417983] pci 0002:20:00.0: reg 0x10: [mem 0x00000000-0x3fffffff]
[    2.418608] pci 0002:20:00.0: reg 0x14: [mem 0x00000000-0x3fffffff]
[    2.419232] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    2.419966] pci 0002:20:00.0: supports D1 D2
[    2.420390] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
[    2.425816] pci 0002:20:00.0: Primary bus is hard wired to 0
[    2.426384] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    2.431655] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
[    2.432339] pci 0002:20:00.0: BAR 0: no space for [mem size 0x40000000]
[    2.432995] pci 0002:20:00.0: BAR 0: failed to assign [mem size 0x40000000]
[    2.433705] pci 0002:20:00.0: BAR 1: no space for [mem size 0x40000000]
[    2.434359] pci 0002:20:00.0: BAR 1: failed to assign [mem size 0x40000000]
[    2.435048] pci 0002:20:00.0: BAR 6: assigned [mem 0x381100000-0x38110ffff pref]
[    2.435779] pci 0002:20:00.0: PCI bridge to [bus 21]
[    2.437872] pcieport 0002:20:00.0: PME: Signaling with IRQ 58
[    2.438784] pcieport 0002:20:00.0: AER: enabled with IRQ 58
[    2.442992] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.443750] dma-pl330 fe530000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.446742] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.447493] dma-pl330 fe550000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.449433] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
[    2.451743] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.454043] printk: console [ttyS2] disabled
[    2.454532] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 42, base_baud = 1500000) is a 16550A
[    2.455660] printk: console [ttyS2] enabled
[    2.456446] printk: bootconsole [uart8250] disabled
[    2.460170] rockchip-vop2 fe040000.vop: Adding to iommu group 0
[    2.464003] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    2.472193] brd: module loaded
[    2.476294] loop: module loaded
[    2.476594] mtip32xx Version 1.3.1
[    2.478429] SPI driver spidev has no spi_device_id for siliconlabs,si3210
[    2.481495] spi-nor spi4.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[    2.482121] spi-nor: probe of spi4.0 failed with error -2
[    2.484327] igb: Intel(R) Gigabit Ethernet Network Driver
[    2.484813] igb: Copyright (c) 2007-2014 Intel Corporation.
[    2.485410] Intel(R) 2.5G Ethernet Linux Driver
[    2.485816] Copyright(c) 2018 Intel Corporation.
[    2.487288] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
[    2.488026] rk_gmac-dwmac fe010000.ethernet: no regulator found
[    2.488557] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
[    2.489213] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f).
[    2.489721] rk_gmac-dwmac fe010000.ethernet: RX delay(0x26).
[    2.490230] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
[    2.490817] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
[    2.496369] rk_gmac-dwmac fe010000.ethernet: init for RGMII
[    2.497188] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    2.497828] rk_gmac-dwmac fe010000.ethernet: 	DWMAC4/5
[    2.498290] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
[    2.498950] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
[    2.499608] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
[    2.500228] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
[    2.500795] rk_gmac-dwmac fe010000.ethernet: TSO supported
[    2.501309] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.502024] rk_gmac-dwmac fe010000.ethernet: device MAC address 00:00:00:00:00:00
[    2.502688] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10)
[    2.503321] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
[    2.503852] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width
[    2.641713] dwc3 fcc00000.usb: Configuration mismatch. dr_mode forced to host
[    2.648383] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.648973] ehci-platform: EHCI generic platform driver
[    2.651765] ehci-platform fd800000.usb: EHCI Host Controller
[    2.652291] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
[    2.653099] ehci-platform fd800000.usb: irq 20, io mem 0xfd800000
[    2.669163] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[    2.670245] hub 1-0:1.0: USB hub found
[    2.670616] hub 1-0:1.0: 1 port detected
[    2.673607] ehci-platform fd880000.usb: EHCI Host Controller
[    2.674131] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
[    2.674940] ehci-platform fd880000.usb: irq 22, io mem 0xfd880000
[    2.689164] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
[    2.690185] hub 2-0:1.0: USB hub found
[    2.690559] hub 2-0:1.0: 1 port detected
[    2.691530] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.692105] ohci-platform: OHCI generic platform driver
[    2.692824] ohci-platform fd840000.usb: Generic Platform OHCI controller
[    2.693484] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
[    2.694285] ohci-platform fd840000.usb: irq 21, io mem 0xfd840000
[    2.757648] hub 3-0:1.0: USB hub found
[    2.758019] hub 3-0:1.0: 1 port detected
[    2.758920] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
[    2.759531] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
[    2.760317] ohci-platform fd8c0000.usb: irq 23, io mem 0xfd8c0000
[    2.821655] hub 4-0:1.0: USB hub found
[    2.822029] hub 4-0:1.0: 1 port detected
[    2.823601] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    2.824112] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[    2.824927] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    2.825846] xhci-hcd xhci-hcd.0.auto: irq 18, io mem 0xfcc00000
[    2.827017] hub 5-0:1.0: USB hub found
[    2.827390] hub 5-0:1.0: 1 port detected
[    2.828079] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    2.828580] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[    2.829303] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    2.829951] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.831116] hub 6-0:1.0: USB hub found
[    2.831487] hub 6-0:1.0: 1 port detected
[    2.832326] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.832836] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[    2.833675] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    2.834561] xhci-hcd xhci-hcd.1.auto: irq 19, io mem 0xfd000000
[    2.835713] hub 7-0:1.0: USB hub found
[    2.836085] hub 7-0:1.0: 1 port detected
[    2.836749] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    2.837272] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[    2.837960] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    2.838615] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.839779] hub 8-0:1.0: USB hub found
[    2.840150] hub 8-0:1.0: 1 port detected
[    2.840994] usbcore: registered new interface driver usb-storage
[    2.841854] mousedev: PS/2 mouse device common for all mice
[    2.842682] i2c_dev: i2c /dev entries driver
[    2.845057] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
[    2.852497] rk808 0-0020: chip id: 0x8090
[    2.885819] random: fast init done
[    2.925161] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    2.927700] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    2.928275] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    2.991790] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
[    3.003730] rk808-rtc rk808-rtc: registered as rtc0
[    3.006828] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:00:08 UTC (1501923608)
[    3.012084] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active.
[    3.013564] sdhci: Secure Digital Host Controller Interface driver
[    3.014118] sdhci: Copyright(c) Pierre Ossman
[    3.014505] Synopsys Designware Multimedia Card Interface Driver
[    3.015434] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.016259] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
[    3.016917] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
[    3.017541] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
[    3.018103] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 37,32 bit host data width,256 deep fifo
[    3.019278] ledtrig-cpu: registered to indicate activity on CPUs
[    3.019513] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
[    3.020211] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    3.020892] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    3.021664] usbcore: registered new interface driver usbhid
[    3.022164] usbhid: USB HID core driver
[    3.024443] NET: Registered PF_INET6 protocol family
[    3.026153] Segment Routing with IPv6
[    3.026519] In-situ OAM (IOAM) with IPv6
[    3.026933] NET: Registered PF_PACKET protocol family
[    3.027572] 8021q: 802.1Q VLAN Support v1.8
[    3.033765] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[    3.047808] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
[    3.069023] Stack Depot allocating hash table with kvmalloc
[    3.073817] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffff8000089d1900)
[    3.078782] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    3.080185] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[    3.081245] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffff8000089d58d8)
[    3.082445] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[    3.086459] hub 1-1:1.0: USB hub found
[    3.086976] hub 1-1:1.0: 4 ports detected
[    3.090469] dw-apb-uart fe660000.serial: forbid DMA for kernel console
[    3.091150] Waiting for root device PARTUUID=5452574f-02...
[    3.128585] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000000Hz, actual 50000000HZ div = 0)
[    3.149824] dwmmc_rockchip fe2b0000.mmc: Successfully tuned phase to 342
[    3.150438] mmc0: new ultra high speed SDR50 SDHC card at address e624
[    3.151890] mmcblk0: mmc0:e624 SB16G 14.8 GiB 
[    3.155409]  mmcblk0: p1 p2
[    3.167087] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[    3.169941] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Quota mode: none.
[    3.170709] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    3.172016] Freeing unused kernel memory: 1792K
[    3.201191] Run /sbin/init as init process
[    3.201565]   with arguments:
[    3.201569]     /sbin/init
[    3.201573]   with environment:
[    3.201576]     HOME=/
[    3.201580]     TERM=linux
[    3.267739] init: Console is alive
[    3.455891] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.464521] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.470327] init: - preinit -
[    3.647338] random: jshn: uninitialized urandom read (4 bytes read)
[    3.849197] usb 8-1: new SuperSpeed USB device number 2 using xhci-hcd
[    3.874192] random: procd: uninitialized urandom read (4 bytes read)
[    5.421149] random: crng init done
[    5.593169] rk_gmac-dwmac fe010000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[    5.625310] rk_gmac-dwmac fe010000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[    5.636819] dwmac4: Master AXI performs any burst length
[    5.637341] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features support found
[    5.638036] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[    5.638971] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock
[    5.640114] rk_gmac-dwmac fe010000.ethernet eth0: configuring for phy/rgmii link mode
[    9.742020] mount_root: mounting /dev/root
[    9.744276] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[    9.745051] mount_root: loading kmods from internal overlay
[    9.763182] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    9.764670] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    9.882709] block: attempting to load /etc/config/fstab
[    9.884771] block: extroot: not configured
[    9.939274] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Quota mode: none.
[    9.947065] urandom-seed: Seeding with /etc/urandom.seed
[    9.971527] procd: - early -
[   10.553332] procd: - ubus -
[   10.606122] procd: - init -
[   10.794780] urngd: v1.0.2 started.
[   10.833296] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.851243] tun: Universal TUN/TAP device driver, 1.6
[   10.857925] l2tp_core: L2TP core driver, V2.0
[   10.859449] l2tp_netlink: L2TP netlink interface
[   10.866184] gre: GRE over IPv4 demultiplexor driver
[   10.868057] ip_gre: GRE over IPv4 tunneling driver
[   10.918050] cryptodev: driver 1.12 loaded.
[   10.922187] GACT probability on
[   10.923716] Mirror/redirect action on
[   10.932395] u32 classifier
[   10.932663]     input device check on
[   10.932989]     Actions configured
[   10.982588] usbcore: registered new interface driver r8152
[   11.002273] xt_time: kernel timezone is -0000
[   11.003840] usbcore: registered new interface driver cdc_ether
[   11.006236] usbcore: registered new interface driver cdc_ncm
[   11.027600] PPP generic driver version 2.4.2
[   11.029185] PPP MPPE Compression module registered
[   11.030754] NET: Registered PF_PPPOX protocol family
[   11.032919] PPTP driver version 0.8.5
[   11.036836] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   11.037591] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   11.046116] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.049215] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.158802] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
[   11.225729] r8152 8-1:1.0: load rtl8153a-3 v2 02/07/20 successfully
[   11.254283] r8152 8-1:1.0 eth1: v1.12.12
[   14.309198] rk_gmac-dwmac fe010000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[   14.361379] rk_gmac-dwmac fe010000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   14.372894] dwmac4: Master AXI performs any burst length
[   14.373411] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features support found
[   14.374107] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   14.375059] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock
[   14.375661] rk_gmac-dwmac fe010000.ethernet eth0: configuring for phy/rgmii link mode
[   14.402309] br-lan: port 1(eth0) entered blocking state
[   14.402815] br-lan: port 1(eth0) entered disabled state
[   14.403618] device eth0 entered promiscuous mode
[   17.472397] rk_gmac-dwmac fe010000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   17.473262] br-lan: port 1(eth0) entered blocking state
[   17.473736] br-lan: port 1(eth0) entered forwarding state
[   17.474534] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   17.511920] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   17.513024] r8152 8-1:1.0 eth1: carrier on



BusyBox v1.35.0 (2022-05-30 19:50:37 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OxenWrt SNAPSHOT, r0-7cf6786
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:/#