Created
July 27, 2020 03:22
-
-
Save mkfink/b12456543bba7e2905319af3331b9756 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| //generate undefines: | |
| //grep "#define" ../Tasmota/tasmota/my_user_config.h | grep -v _MY_USER_CONFIG_H_ | sed 's/[\/ ]*#define \([A-Za-z_0-9]*\).*/#undef \1/' | sort | uniq | tee -a blank_defines.h | |
| //Config for living_room_dimmer_lightswitch generated on 2020-07-25 22:32:05.096272 | |
| #ifndef _USER_CONFIG_OVERRIDE_H_ | |
| #define _USER_CONFIG_OVERRIDE_H_ | |
| /*********************************************************************************************\ | |
| * SECTION 0 | |
| * - Undefine everything first | |
| \*********************************************************************************************/ | |
| #undef APP_BLINKCOUNT | |
| #undef APP_BLINKTIME | |
| #undef APP_DISABLE_POWERCYCLE | |
| #undef APP_ENABLE_LEDLINK | |
| #undef APP_FLASH_CYCLE | |
| #undef APP_LEDMASK | |
| #undef APP_LEDSTATE | |
| #undef APP_NORMAL_SLEEP | |
| #undef APP_NO_RELAY_SCAN | |
| #undef APP_POWERON_STATE | |
| #undef APP_PULSETIME | |
| #undef APP_SLEEP | |
| #undef APP_TIMEZONE | |
| #undef BOOT_LOOP_OFFSET | |
| #undef BUZZER_ENABLE | |
| #undef CALC_RESOLUTION | |
| #undef CFG_HOLDER | |
| #undef CO2_HIGH | |
| #undef CO2_LOW | |
| #undef COLOR_BACKGROUND | |
| #undef COLOR_BUTTON | |
| #undef COLOR_BUTTON_HOVER | |
| #undef COLOR_BUTTON_RESET | |
| #undef COLOR_BUTTON_RESET_HOVER | |
| #undef COLOR_BUTTON_SAVE | |
| #undef COLOR_BUTTON_SAVE_HOVER | |
| #undef COLOR_BUTTON_TEXT | |
| #undef COLOR_CONSOLE | |
| #undef COLOR_CONSOLE_TEXT | |
| #undef COLOR_FORM | |
| #undef COLOR_INPUT | |
| #undef COLOR_INPUT_TEXT | |
| #undef COLOR_TEXT | |
| #undef COLOR_TEXT_SUCCESS | |
| #undef COLOR_TEXT_WARNING | |
| #undef COLOR_TIMER_TAB_BACKGROUND | |
| #undef COLOR_TIMER_TAB_TEXT | |
| #undef COLOR_TITLE_TEXT | |
| #undef CORS_DOMAIN | |
| #undef COUNTER_RESET | |
| #undef DDS2382_SPEED | |
| #undef DDSU666_SPEED | |
| #undef DEBUG_TASMOTA_CORE | |
| #undef DEBUG_TASMOTA_DRIVER | |
| #undef DEBUG_TASMOTA_SENSOR | |
| #undef DEEPSLEEP_BOOTCOUNT | |
| #undef DEVICE_GROUPS_ADDRESS | |
| #undef DEVICE_GROUPS_PORT | |
| #undef DOMOTICZ_IN_TOPIC | |
| #undef DOMOTICZ_OUT_TOPIC | |
| #undef DOMOTICZ_UPDATE_TIMER | |
| #undef DS18X20_PULL_UP | |
| #undef EMULATION | |
| #undef ENERGY_DDS2382_MODE | |
| #undef ENERGY_HARDWARE_TOTALS | |
| #undef ENERGY_RESOLUTION | |
| #undef ENERGY_VOLTAGE_ALWAYS | |
| #undef EXS_MCU_CMNDS | |
| #undef FIRMWARE_DISPLAYS | |
| #undef FIRMWARE_IR | |
| #undef FIRMWARE_IR_CUSTOM | |
| #undef FIRMWARE_KNX_NO_EMULATION | |
| #undef FIRMWARE_LITE | |
| #undef FIRMWARE_MINIMAL | |
| #undef FIRMWARE_SENSORS | |
| #undef FRIENDLY_NAME | |
| #undef GUI_SHOW_HOSTNAME | |
| #undef HASS_AS_LIGHT | |
| #undef HOME_ASSISTANT_DISCOVERY_ENABLE | |
| #undef HOME_ASSISTANT_DISCOVERY_PREFIX | |
| #undef HUMIDITY_RESOLUTION | |
| #undef IR_ADD_RAW_DATA | |
| #undef IR_DATA_RADIX | |
| #undef IR_RCV_BUFFER_SIZE | |
| #undef IR_RCV_MIN_UNKNOWN_SIZE | |
| #undef IR_RCV_TIMEOUT | |
| #undef KEY_DEBOUNCE_TIME | |
| #undef KEY_DISABLE_MULTIPRESS | |
| #undef KEY_HOLD_TIME | |
| #undef KEY_ONLY_SINGLE_PRESS | |
| #undef KEY_SWAP_DOUBLE_PRESS | |
| #undef KNX_ENABLED | |
| #undef KNX_ENHANCED | |
| #undef LATITUDE | |
| #undef LE01MR_ADDR | |
| #undef LE01MR_SPEED | |
| #undef LIGHT_ALEXA_CT_RANGE | |
| #undef LIGHT_CHANNEL_MODE | |
| #undef LIGHT_CLOCK_DIRECTION | |
| #undef LIGHT_COLOR_RADIX | |
| #undef LIGHT_MODE | |
| #undef LIGHT_PAIRS_CO2 | |
| #undef LIGHT_POWER_CONTROL | |
| #undef LIGHT_PWM_CT_MODE | |
| #undef LIGHT_SLIDER_POWER | |
| #undef LONGITUDE | |
| #undef MAX31865_PTD_BIAS | |
| #undef MAX31865_PTD_RES | |
| #undef MAX31865_PTD_WIRES | |
| #undef MAX31865_REF_RES | |
| #undef MDNS_ENABLED | |
| #undef MGS_SENSOR_ADDR | |
| #undef MODULE | |
| #undef MP3_VOLUME | |
| #undef MQTT_APPEND_TIMEZONE | |
| #undef MQTT_BUTTON_RETAIN | |
| #undef MQTT_BUTTON_SWITCH_FORCE_LOCAL | |
| #undef MQTT_BUTTON_TOPIC | |
| #undef MQTT_CLEAN_SESSION | |
| #undef MQTT_CLIENT_ID | |
| #undef MQTT_CMND_HOLD | |
| #undef MQTT_CMND_TOGGLE | |
| #undef MQTT_FINGERPRINT1 | |
| #undef MQTT_FINGERPRINT2 | |
| #undef MQTT_FULLTOPIC | |
| #undef MQTT_GROUPTOPIC_FORMAT | |
| #undef MQTT_GRPTOPIC | |
| #undef MQTT_HOST | |
| #undef MQTT_HOST_DISCOVERY | |
| #undef MQTT_INDEX_SEPARATOR | |
| #undef MQTT_LOG_LEVEL | |
| #undef MQTT_LWT_MESSAGE | |
| #undef MQTT_NO_HOLD_RETAIN | |
| #undef MQTT_NO_RETAIN | |
| #undef MQTT_PASS | |
| #undef MQTT_PORT | |
| #undef MQTT_POWER_FORMAT | |
| #undef MQTT_POWER_RETAIN | |
| #undef MQTT_RESULT_COMMAND | |
| #undef MQTT_SENSOR_RETAIN | |
| #undef MQTT_STATUS_OFF | |
| #undef MQTT_STATUS_ON | |
| #undef MQTT_SWITCH_RETAIN | |
| #undef MQTT_SWITCH_TOPIC | |
| #undef MQTT_TELE_RETAIN | |
| #undef MQTT_TOPIC | |
| #undef MQTT_TUYA_RECEIVED | |
| #undef MQTT_USE | |
| #undef MQTT_USER | |
| #undef MTX_ADDRESS1 | |
| #undef MTX_ADDRESS2 | |
| #undef MTX_ADDRESS3 | |
| #undef MTX_ADDRESS4 | |
| #undef MTX_ADDRESS5 | |
| #undef MTX_ADDRESS6 | |
| #undef MTX_ADDRESS7 | |
| #undef MTX_ADDRESS8 | |
| #undef MY_LANGUAGE | |
| #undef NTP_SERVER1 | |
| #undef NTP_SERVER2 | |
| #undef NTP_SERVER3 | |
| #undef OTA_COMPATIBILITY | |
| #undef OTA_URL | |
| #undef PCF8574_INVERT_PORTS | |
| #undef PMS_MODEL_PMS3003 | |
| #undef PRESSURE_CONVERSION | |
| #undef PRESSURE_RESOLUTION | |
| #undef PROJECT | |
| #undef PUB_PREFIX | |
| #undef PUB_PREFIX2 | |
| #undef PWM_MAX_SLEEP | |
| #undef RF_DATA_RADIX | |
| #undef ROTARY_V1 | |
| #undef SAVE_DATA | |
| #undef SAVE_STATE | |
| #undef SDM120_SPEED | |
| #undef SDM630_SPEED | |
| #undef SERIAL_LOG_LEVEL | |
| #undef SEVENSEG_ADDRESS1 | |
| #undef SHUTTER_SUPPORT | |
| #undef SOLAXX1_PV2 | |
| #undef SOLAXX1_SPEED | |
| #undef STARTING_OFFSET | |
| #undef STA_PASS1 | |
| #undef STA_PASS2 | |
| #undef STA_SSID1 | |
| #undef STA_SSID2 | |
| #undef SUB_PREFIX | |
| #undef SUNRISE_DAWN_ANGLE | |
| #undef SUPPORT_IF_STATEMENT | |
| #undef SUPPORT_MQTT_EVENT | |
| #undef SWITCH_DEBOUNCE_TIME | |
| #undef SWITCH_MODE | |
| #undef SYS_LOG_HOST | |
| #undef SYS_LOG_LEVEL | |
| #undef SYS_LOG_PORT | |
| #undef TELE_ON_POWER | |
| #undef TELE_PERIOD | |
| #undef TEMP_CONVERSION | |
| #undef TEMP_RESOLUTION | |
| #undef THERMOSTAT_CONTROLLER_OUTPUTS | |
| #undef THERMOSTAT_DUTYCYCLE_AUTOTUNE | |
| #undef THERMOSTAT_PEAKNUMBER_AUTOTUNE | |
| #undef THERMOSTAT_PROP_BAND | |
| #undef THERMOSTAT_RELAY_NUMBER | |
| #undef THERMOSTAT_SENSOR_NAME | |
| #undef THERMOSTAT_SWITCH_NUMBER | |
| #undef THERMOSTAT_TEMP_BAND_NO_PEAK_DET | |
| #undef THERMOSTAT_TEMP_FROST_PROTECT | |
| #undef THERMOSTAT_TEMP_HYSTERESIS | |
| #undef THERMOSTAT_TEMP_INIT | |
| #undef THERMOSTAT_TEMP_PI_RAMPUP_ACC_E | |
| #undef THERMOSTAT_TEMP_RAMPUP_DELTA_IN | |
| #undef THERMOSTAT_TEMP_RAMPUP_DELTA_OUT | |
| #undef THERMOSTAT_TEMP_RESET_ANTI_WINDUP | |
| #undef THERMOSTAT_TEMP_SENS_NUMBER | |
| #undef THERMOSTAT_TIME_ALLOW_RAMPUP | |
| #undef THERMOSTAT_TIME_MANUAL_TO_AUTO | |
| #undef THERMOSTAT_TIME_MAX_ACTION | |
| #undef THERMOSTAT_TIME_MAX_AUTOTUNE | |
| #undef THERMOSTAT_TIME_MAX_OUTPUT_INCONSIST | |
| #undef THERMOSTAT_TIME_MIN_ACTION | |
| #undef THERMOSTAT_TIME_MIN_TURNOFF_ACTION | |
| #undef THERMOSTAT_TIME_OUTPUT_DELAY | |
| #undef THERMOSTAT_TIME_PI_CYCLE | |
| #undef THERMOSTAT_TIME_RAMPUP_CYCLE | |
| #undef THERMOSTAT_TIME_RAMPUP_MAX | |
| #undef THERMOSTAT_TIME_RESET | |
| #undef THERMOSTAT_TIME_SENS_LOST | |
| #undef THERMOSTAT_TIME_STD_DEV_PEAK_DET_OK | |
| #undef TIMERS_ENABLED | |
| #undef TIME_DST_DAY | |
| #undef TIME_DST_HEMISPHERE | |
| #undef TIME_DST_HOUR | |
| #undef TIME_DST_MONTH | |
| #undef TIME_DST_OFFSET | |
| #undef TIME_DST_WEEK | |
| #undef TIME_STD_DAY | |
| #undef TIME_STD_HEMISPHERE | |
| #undef TIME_STD_HOUR | |
| #undef TIME_STD_MONTH | |
| #undef TIME_STD_OFFSET | |
| #undef TIME_STD_WEEK | |
| #undef TUYA_DIMMER_ID | |
| #undef TUYA_SETOPTION_20 | |
| #undef USE_4K_RSA | |
| #undef USE_A4988_STEPPER | |
| #undef USE_ADC_VCC | |
| #undef USE_ADE7953 | |
| #undef USE_ADS1115 | |
| #undef USE_AHT1x | |
| #undef USE_ALECTO_V2 | |
| #undef USE_APDS9960 | |
| #undef USE_APDS9960_COLOR | |
| #undef USE_APDS9960_GESTURE | |
| #undef USE_APDS9960_PROXIMITY | |
| #undef USE_APDS9960_STARTMODE | |
| #undef USE_ARDUINO_OTA | |
| #undef USE_ARILUX_RF | |
| #undef USE_ARMTRONIX_DIMMERS | |
| #undef USE_AS3935 | |
| #undef USE_AZ7798 | |
| #undef USE_BH1750 | |
| #undef USE_BME680 | |
| #undef USE_BMP | |
| #undef USE_BUZZER | |
| #undef USE_CCS811 | |
| #undef USE_CHIRP | |
| #undef USE_CONFIG_OVERRIDE | |
| #undef USE_COUNTER | |
| #undef USE_DDS2382 | |
| #undef USE_DDSU666 | |
| #undef USE_DEBUG_DRIVER | |
| #undef USE_DEEPSLEEP | |
| #undef USE_DEVICE_GROUPS | |
| #undef USE_DEVICE_GROUPS_SEND | |
| #undef USE_DGR_LIGHT_SEQUENCE | |
| #undef USE_DHT | |
| #undef USE_DHT12 | |
| #undef USE_DISCOVERY | |
| #undef USE_DISPLAY | |
| #undef USE_DISPLAY_EPAPER_29 | |
| #undef USE_DISPLAY_EPAPER_42 | |
| #undef USE_DISPLAY_ILI9341 | |
| #undef USE_DISPLAY_ILI9488 | |
| #undef USE_DISPLAY_LCD | |
| #undef USE_DISPLAY_MATRIX | |
| #undef USE_DISPLAY_MODES1TO5 | |
| #undef USE_DISPLAY_RA8876 | |
| #undef USE_DISPLAY_SEVENSEG | |
| #undef USE_DISPLAY_SH1106 | |
| #undef USE_DISPLAY_SSD1306 | |
| #undef USE_DISPLAY_SSD1351 | |
| #undef USE_DOMOTICZ | |
| #undef USE_DS1624 | |
| #undef USE_DS18x20 | |
| #undef USE_DS3231 | |
| #undef USE_ELECTRIQ_MOODL | |
| #undef USE_EMULATION_HUE | |
| #undef USE_EMULATION_WEMO | |
| #undef USE_ENERGY_MARGIN_DETECTION | |
| #undef USE_ENERGY_POWER_LIMIT | |
| #undef USE_EXPRESSION | |
| #undef USE_EXS_DIMMER | |
| #undef USE_FLOG | |
| #undef USE_GPS | |
| #undef USE_HDC1080 | |
| #undef USE_HIH6 | |
| #undef USE_HM10 | |
| #undef USE_HOME_ASSISTANT | |
| #undef USE_HOTPLUG | |
| #undef USE_HPMA | |
| #undef USE_HRE | |
| #undef USE_HRXL | |
| #undef USE_HTU | |
| #undef USE_HX711 | |
| #undef USE_HX711_GUI | |
| #undef USE_I2C | |
| #undef USE_IAQ | |
| #undef USE_IBEACON | |
| #undef USE_INA219 | |
| #undef USE_INA226 | |
| #undef USE_IR_RECEIVE | |
| #undef USE_IR_REMOTE | |
| #undef USE_IR_SEND_NEC | |
| #undef USE_IR_SEND_RC5 | |
| #undef USE_IR_SEND_RC6 | |
| #undef USE_JAVASCRIPT_ES6 | |
| #undef USE_KEELOQ | |
| #undef USE_KNX | |
| #undef USE_KNX_WEB_MENU | |
| #undef USE_LE01MR | |
| #undef USE_LIGHT_PALETTE | |
| #undef USE_LM75AD | |
| #undef USE_MAX31855 | |
| #undef USE_MAX31865 | |
| #undef USE_MAX44009 | |
| #undef USE_MCP230xx | |
| #undef USE_MCP230xx_ADDR | |
| #undef USE_MCP230xx_DISPLAYOUTPUT | |
| #undef USE_MCP230xx_OUTPUT | |
| #undef USE_MCP39F501 | |
| #undef USE_MGC3130 | |
| #undef USE_MGS | |
| #undef USE_MHZ19 | |
| #undef USE_MIBLE | |
| #undef USE_MI_ESP32 | |
| #undef USE_MLX90614 | |
| #undef USE_MP3_PLAYER | |
| #undef USE_MPR121 | |
| #undef USE_MPU6050 | |
| #undef USE_MPU6050_DMP | |
| #undef USE_MQTT_AWS_IOT | |
| #undef USE_MQTT_TLS | |
| #undef USE_MQTT_TLS_CA_CERT | |
| #undef USE_MQTT_TLS_FORCE_EC_CIPHER | |
| #undef USE_MY92X1 | |
| #undef USE_NOVA_SDS | |
| #undef USE_NRF24 | |
| #undef USE_OPENTHERM | |
| #undef USE_PAJ7620 | |
| #undef USE_PCA9685 | |
| #undef USE_PCA9685_ADDR | |
| #undef USE_PCA9685_FREQ | |
| #undef USE_PCF8574 | |
| #undef USE_PING | |
| #undef USE_PMS5003 | |
| #undef USE_PN532_CAUSE_EVENTS | |
| #undef USE_PN532_DATA_FUNCTION | |
| #undef USE_PN532_DATA_RAW | |
| #undef USE_PN532_HSU | |
| #undef USE_PS_16_DZ | |
| #undef USE_PWM_DIMMER | |
| #undef USE_PWM_DIMMER_REMOTE | |
| #undef USE_PZEM004T | |
| #undef USE_PZEM_AC | |
| #undef USE_PZEM_DC | |
| #undef USE_RC_SWITCH | |
| #undef USE_RDM6300 | |
| #undef USE_RF_FLASH | |
| #undef USE_RF_SENSOR | |
| #undef USE_RTC_ADDR | |
| #undef USE_RULES | |
| #undef USE_RULES_COMPRESSION | |
| #undef USE_SCD30 | |
| #undef USE_SCRIPT | |
| #undef USE_SCRIPT_FATFS | |
| #undef USE_SDM120 | |
| #undef USE_SDM630 | |
| #undef USE_SENSEAIR | |
| #undef USE_SERIAL_BRIDGE | |
| #undef USE_SGP30 | |
| #undef USE_SHT | |
| #undef USE_SHT3X | |
| #undef USE_SHUTTER | |
| #undef USE_SI1145 | |
| #undef USE_SM16716 | |
| #undef USE_SM2135 | |
| #undef USE_SOLAX_X1 | |
| #undef USE_SONOFF_D1 | |
| #undef USE_SONOFF_IFAN | |
| #undef USE_SONOFF_L1 | |
| #undef USE_SONOFF_RF | |
| #undef USE_SONOFF_SC | |
| #undef USE_SPI | |
| #undef USE_SPS30 | |
| #undef USE_SR04 | |
| #undef USE_SUNRISE | |
| #undef USE_TASMOTA_SLAVE | |
| #undef USE_TASMOTA_SLAVE_FLASH_SPEED | |
| #undef USE_TASMOTA_SLAVE_SERIAL_SPEED | |
| #undef USE_THEO_V2 | |
| #undef USE_THERMOSTAT | |
| #undef USE_TIMERS | |
| #undef USE_TIMERS_WEB | |
| #undef USE_TM1638 | |
| #undef USE_TSL2561 | |
| #undef USE_TSL2591 | |
| #undef USE_TUYA_MCU | |
| #undef USE_TUYA_TIME | |
| #undef USE_TX20_WIND_SENSOR | |
| #undef USE_TX23_WIND_SENSOR | |
| #undef USE_VEML6070 | |
| #undef USE_VEML6070_RSET | |
| #undef USE_VEML6070_SHOW_RAW | |
| #undef USE_VL53L0X | |
| #undef USE_WEBSEND_RESPONSE | |
| #undef USE_WEBSERVER | |
| #undef USE_WEMOS_MOTOR_V1 | |
| #undef USE_WINDMETER | |
| #undef USE_WS2812 | |
| #undef USE_WS2812_CTYPE | |
| #undef USE_WS2812_DMA | |
| #undef USE_WS2812_HARDWARE | |
| #undef USE_ZIGBEE | |
| #undef USE_ZIGBEE_CHANNEL | |
| #undef USE_ZIGBEE_COALESCE_ATTR_TIMER | |
| #undef USE_ZIGBEE_EXTPANID | |
| #undef USE_ZIGBEE_PANID | |
| #undef USE_ZIGBEE_PRECFGKEY_H | |
| #undef USE_ZIGBEE_PRECFGKEY_L | |
| #undef W1_PARASITE_POWER | |
| #undef WEBSERVER_ADVERTISE | |
| #undef WEB_LOG_LEVEL | |
| #undef WEB_PASSWORD | |
| #undef WEB_PORT | |
| #undef WEB_SERVER | |
| #undef WEB_USERNAME | |
| #undef WEMOS_MOTOR_V1_ADDR | |
| #undef WEMOS_MOTOR_V1_FREQ | |
| #undef WIFI_AP_PASSPHRASE | |
| #undef WIFI_ARP_INTERVAL | |
| #undef WIFI_CONFIG_TOOL | |
| #undef WIFI_DNS | |
| #undef WIFI_GATEWAY | |
| #undef WIFI_IP_ADDRESS | |
| #undef WIFI_SCAN_AT_RESTART | |
| #undef WIFI_SCAN_REGULARLY | |
| #undef WIFI_SOFT_AP_CHANNEL | |
| #undef WIFI_SUBNETMASK | |
| #undef WS2812_LEDS | |
| #undef ZIGBEE_FRIENDLY_NAMES | |
| // force the compiler to show a warning to confirm that this file is inlcuded | |
| #warning "**** user_config_override.h: Using Settings from this File ****" | |
| /*********************************************************************************************\ | |
| * SECTION 1 | |
| * - After initial load any change here only take effect if CFG_HOLDER is changed too | |
| \*********************************************************************************************/ | |
| // -- Project ------------------------------------- | |
| #define PROJECT "tasmota" // PROJECT is used as the default topic delimiter | |
| // If not selected the default will be SONOFF_BASIC | |
| //#define MODULE SONOFF_BASIC // [Module] Select default model from tasmota_template.h | |
| #define SAVE_DATA 1 // [SaveData] Save changed parameters to Flash (0 = disable, 1 - 3600 seconds) | |
| #define SAVE_STATE false // [SetOption0] Save changed power state to Flash (false = disable, true = enable) | |
| #define BOOT_LOOP_OFFSET 1 // [SetOption36] Number of boot loops before starting restoring defaults (0 = disable, 1..200 = boot loops offset) | |
| // -- Wifi ---------------------------------------- | |
| #define WIFI_IP_ADDRESS "0.0.0.0" // [IpAddress1] Set to 0.0.0.0 for using DHCP or enter a static IP address | |
| #define WIFI_GATEWAY "" // [IpAddress2] If not using DHCP set Gateway IP address | |
| #define WIFI_SUBNETMASK "" // [IpAddress3] If not using DHCP set Network mask | |
| #define WIFI_DNS "" // [IpAddress4] If not using DHCP set DNS IP address (might be equal to WIFI_GATEWAY) | |
| #define WIFI_AP_PASSPHRASE "" // AccessPoint passphrase. For WPA2 min 8 char, for open use "" (max 63 char). | |
| #define WIFI_CONFIG_TOOL WIFI_RETRY // [WifiConfig] Default tool if wifi fails to connect (default option: 4 - WIFI_RETRY) | |
| // (WIFI_RESTART, WIFI_MANAGER, WIFI_RETRY, WIFI_WAIT, WIFI_SERIAL, WIFI_MANAGER_RESET_ONLY) | |
| // The configuration can be changed after first setup using WifiConfig 0, 2, 4, 5, 6 and 7. | |
| #define WIFI_ARP_INTERVAL 0 // [SetOption41] Send gratuitous ARP interval | |
| #define WIFI_SCAN_AT_RESTART true // [SetOption56] Scan wifi network at restart for configured AP's | |
| #define WIFI_SCAN_REGULARLY true // [SetOption57] Scan wifi network every 44 minutes for configured AP's | |
| // -- Syslog -------------------------------------- | |
| #define SYS_LOG_HOST "" // [LogHost] (Linux) syslog host | |
| #define SYS_LOG_PORT 514 // [LogPort] default syslog UDP port | |
| #define SYS_LOG_LEVEL LOG_LEVEL_NONE // [SysLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE) | |
| #define SERIAL_LOG_LEVEL LOG_LEVEL_INFO // [SerialLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE) | |
| #define WEB_LOG_LEVEL LOG_LEVEL_INFO // [WebLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE) | |
| #define MQTT_LOG_LEVEL LOG_LEVEL_NONE // [MqttLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE) | |
| // -- Ota ----------------------------------------- | |
| #define OTA_URL "" // [OtaUrl] | |
| #define OTA_COMPATIBILITY false // [SetOption78] Disable OTA compatibility check | |
| // -- MQTT ---------------------------------------- | |
| #define MQTT_USE true // [SetOption3] Select default MQTT use (false = Off, true = On) | |
| #define MQTT_FINGERPRINT1 "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00" // [MqttFingerprint1] | |
| #define MQTT_FINGERPRINT2 "A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07" // [MqttFingerprint2] | |
| #define MQTT_PORT 1883 // [MqttPort] MQTT port (10123 on CloudMQTT) | |
| #define MQTT_USER "DVES_USER" // [MqttUser] MQTT user | |
| #define MQTT_PASS "DVES_PASS" // [MqttPassword] MQTT password | |
| #define MQTT_BUTTON_RETAIN false // [ButtonRetain] Button may send retain flag (false = off, true = on) | |
| #define MQTT_POWER_RETAIN false // [PowerRetain] Power status message may send retain flag (false = off, true = on) | |
| #define MQTT_SWITCH_RETAIN false // [SwitchRetain] Switch may send retain flag (false = off, true = on) | |
| #define MQTT_SENSOR_RETAIN false // [SensorRetain] Sensor may send retain flag (false = off, true = on) | |
| #define MQTT_NO_HOLD_RETAIN false // [SetOption62] Disable retain flag on HOLD messages | |
| //#define MQTT_NO_RETAIN // Disable all retain flags (including LWT!) if unsupported by broker (eg Losant) | |
| #define MQTT_STATUS_OFF "OFF" // [StateText1] Command or Status result when turned off (needs to be a string like "0" or "Off") | |
| #define MQTT_STATUS_ON "ON" // [StateText2] Command or Status result when turned on (needs to be a string like "1" or "On") | |
| #define MQTT_CMND_TOGGLE "TOGGLE" // [StateText3] Command to send when toggling (needs to be a string like "2" or "Toggle") | |
| #define MQTT_CMND_HOLD "HOLD" // [StateText4] Command to send when button is kept down for over KEY_HOLD_TIME * 0.1 seconds (needs to be a string like "HOLD") | |
| // %prefix% token options | |
| #define SUB_PREFIX "cmnd" // [Prefix1] Tasmota devices subscribe to %prefix%/%topic% being SUB_PREFIX/MQTT_TOPIC and SUB_PREFIX/MQTT_GRPTOPIC | |
| #define PUB_PREFIX "stat" // [Prefix2] Tasmota devices publish to %prefix%/%topic% being PUB_PREFIX/MQTT_TOPIC | |
| #define PUB_PREFIX2 "tele" // [Prefix3] Tasmota devices publish telemetry data to %prefix%/%topic% being PUB_PREFIX2/MQTT_TOPIC/UPTIME, POWER and TIME | |
| // May be named the same as PUB_PREFIX | |
| // %topic% token options (also ButtonTopic and SwitchTopic) | |
| #define MQTT_GROUPTOPIC_FORMAT false // [SetOption75] GroupTopic replaces %topic% (false) or fixed topic cmnd/grouptopic (true) | |
| #define MQTT_BUTTON_TOPIC "0" // [ButtonTopic] MQTT button topic, "0" = same as MQTT_TOPIC, set to 'PROJECT "_BTN_%06X"' for unique topic including device MAC address | |
| #define MQTT_SWITCH_TOPIC "0" // [SwitchTopic] MQTT button topic, "0" = same as MQTT_TOPIC, set to 'PROJECT "_SW_%06X"' for unique topic including device MAC address | |
| #define MQTT_CLIENT_ID "DVES_%06X" // [MqttClient] Also fall back topic using Chip Id = last 6 characters of MAC address | |
| // -- MQTT - Telemetry ---------------------------- | |
| #define TELE_PERIOD 300 // [TelePeriod] Telemetry (0 = disable, 10 - 3600 seconds) | |
| #define TELE_ON_POWER false // [SetOption59] send tele/STATE together with stat/RESULT (false = Disable, true = Enable) | |
| // -- MQTT - Domoticz ----------------------------- | |
| #define DOMOTICZ_UPDATE_TIMER 0 // [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds) | |
| // -- MQTT - Home Assistant Discovery ------------- | |
| #define HOME_ASSISTANT_DISCOVERY_ENABLE false // [SetOption19] Home Assistant Discovery (false = Disable, true = Enable) | |
| #define HASS_AS_LIGHT false // [SetOption30] Enforce HAss autodiscovery as light | |
| // -- MQTT - Options ------------------------------ | |
| #define MQTT_RESULT_COMMAND false // [SetOption4] Switch between MQTT RESULT or COMMAND | |
| #define MQTT_LWT_MESSAGE false // [SetOption10] Switch between MQTT LWT OFFLINE or empty message | |
| #define MQTT_POWER_FORMAT false // [SetOption26] Switch between POWER or POWER1 for single power devices | |
| #define MQTT_APPEND_TIMEZONE false // [SetOption52] Append timezone to JSON time | |
| #define MQTT_BUTTON_SWITCH_FORCE_LOCAL false // [SetOption61] Force local operation when button/switch topic is set (false = off, true = on) | |
| #define MQTT_INDEX_SEPARATOR false // [SetOption64] Enable "_" instead of "-" as sensor index separator | |
| #define MQTT_TUYA_RECEIVED false // [SetOption66] Enable TuyaMcuReceived messages over Mqtt | |
| // -- HTTP ---------------------------------------- | |
| #define WEB_SERVER 2 // [WebServer] Web server (0 = Off, 1 = Start as User, 2 = Start as Admin) | |
| #define WEB_PASSWORD "" // [WebPassword] Web server Admin mode Password for WEB_USERNAME (empty string = Disable) | |
| #define EMULATION EMUL_NONE // [Emulation] Select Belkin WeMo (single relay/light) or Hue Bridge emulation (multi relay/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE) | |
| #define CORS_DOMAIN "" // [Cors] CORS Domain for preflight requests | |
| // -- HTTP Options -------------------------------- | |
| #define GUI_SHOW_HOSTNAME false // [SetOption53] Show hostname and IP address in GUI main menu | |
| // Dark theme | |
| #define COLOR_TEXT "#eaeaea" // [WebColor1] Global text color - Very light gray | |
| #define COLOR_BACKGROUND "#252525" // [WebColor2] Global background color - Very dark gray (mostly black) | |
| #define COLOR_FORM "#4f4f4f" // [WebColor3] Form background color - Very dark gray | |
| #define COLOR_INPUT_TEXT "#000" // [WebColor4] Input text color - Black | |
| #define COLOR_INPUT "#ddd" // [WebColor5] Input background color - Very light gray | |
| #define COLOR_CONSOLE_TEXT "#65c115" // [WebColor6] Console text color - Strong Green | |
| #define COLOR_CONSOLE "#1f1f1f" // [WebColor7] Console background color - Very dark gray (mostly black) | |
| #define COLOR_TEXT_WARNING "#ff5661" // [WebColor8] Warning text color - Brick Red | |
| #define COLOR_TEXT_SUCCESS "#008000" // [WebColor9] Success text color - Dark lime green | |
| #define COLOR_BUTTON_TEXT "#faffff" // [WebColor10] Button text color - Very pale (mostly white) cyan | |
| #define COLOR_BUTTON "#1fa3ec" // [WebColor11] Button color - Vivid blue | |
| #define COLOR_BUTTON_HOVER "#0e70a4" // [WebColor12] Button color when hovered over - Dark blue | |
| #define COLOR_BUTTON_RESET "#d43535" // [WebColor13] Restart/Reset/Delete button color - Strong red | |
| #define COLOR_BUTTON_RESET_HOVER "#931f1f" // [WebColor14] Restart/Reset/Delete button color when hovered over - Dark red | |
| #define COLOR_BUTTON_SAVE "#47c266" // [WebColor15] Save button color - Moderate lime green | |
| #define COLOR_BUTTON_SAVE_HOVER "#5aaf6f" // [WebColor16] Save button color when hovered over - Dark moderate lime green | |
| #define COLOR_TIMER_TAB_TEXT "#faffff" // [WebColor17] Config timer tab text color - Very pale (mostly white) cyan. | |
| #define COLOR_TIMER_TAB_BACKGROUND "#999" // [WebColor18] Config timer tab background color - Dark gray | |
| #define COLOR_TITLE_TEXT "#eaeaea" // [WebColor19] Title text color - Very light gray | |
| // -- KNX ----------------------------------------- | |
| #define KNX_ENABLED false // [Knx_Enabled] Enable KNX protocol | |
| #define KNX_ENHANCED false // [Knx_Enhanced] Enable KNX Enhanced Mode | |
| // -- mDNS ---------------------------------------- | |
| #define MDNS_ENABLED false // [SetOption55] Use mDNS (false = Disable, true = Enable) | |
| // -- Time - Up to three NTP servers in your region | |
| // #define NTP_SERVER1 "pool.ntp.org" // [NtpServer1] Select first NTP server by name or IP address (129.250.35.250) | |
| #define NTP_SERVER2 "nl.pool.ntp.org" // [NtpServer2] Select second NTP server by name or IP address (5.39.184.5) | |
| #define NTP_SERVER3 "0.nl.pool.ntp.org" // [NtpServer3] Select third NTP server by name or IP address (93.94.224.67) | |
| // -- Time - Start Daylight Saving Time and timezone offset from UTC in minutes | |
| #define TIME_DST_HEMISPHERE North // [TimeDst] Hemisphere (0 or North, 1 or South) | |
| #define TIME_DST_WEEK Second // Week of month (0 or Last, 1 or First, 2 or Second, 3 or Third, 4 or Fourth) | |
| #define TIME_DST_DAY Sun // Day of week (1 or Sun, 2 or Mon, 3 or Tue, 4 or Wed, 5 or Thu, 6 or Fri, 7 or Sat) | |
| #define TIME_DST_MONTH Mar // Month (1 or Jan, 2 or Feb, 3 or Mar, 4 or Apr, 5 or May, 6 or Jun, 7 or Jul, 8 or Aug, 9 or Sep, 10 or Oct, 11 or Nov, 12 or Dec) | |
| #define TIME_DST_HOUR 2 // Hour (0 to 23) | |
| #define TIME_DST_OFFSET -240 // Offset from UTC in minutes (-780 to +780) | |
| // -- Time - Start Standard Time and timezone offset from UTC in minutes | |
| #define TIME_STD_HEMISPHERE North // [TimeStd] Hemisphere (0 or North, 1 or South) | |
| #define TIME_STD_WEEK First // Week of month (0 or Last, 1 or First, 2 or Second, 3 or Third, 4 or Fourth) | |
| #define TIME_STD_DAY Sun // Day of week (1 or Sun, 2 or Mon, 3 or Tue, 4 or Wed, 5 or Thu, 6 or Fri, 7 or Sat) | |
| #define TIME_STD_MONTH Nov // Month (1 or Jan, 2 or Feb, 3 or Mar, 4 or Apr, 5 or May, 6 or Jun, 7 or Jul, 8 or Aug, 9 or Sep, 10 or Oct, 11 or Nov, 12 or Dec) | |
| #define TIME_STD_HOUR 3 // Hour (0 to 23) | |
| #define TIME_STD_OFFSET -300 // Offset from UTC in minutes (-780 to +780) | |
| // -- Application --------------------------------- | |
| #define APP_TIMEZONE 99 // [Timezone] +1 hour (Amsterdam) (-13 .. 14 = hours from UTC, 99 = use TIME_DST/TIME_STD) | |
| #define APP_LEDSTATE LED_POWER // [LedState] Function of led | |
| // (LED_OFF, LED_POWER, LED_MQTTSUB, LED_POWER_MQTTSUB, LED_MQTTPUB, LED_POWER_MQTTPUB, LED_MQTT, LED_POWER_MQTT) | |
| #define APP_LEDMASK 0xFFFF // [LedMask] Assign Relay to Power led (0xFFFF is default) | |
| #define APP_ENABLE_LEDLINK false // [SetOption31] Enable link led blinking | |
| #define APP_PULSETIME 0 // [PulseTime] Time in 0.1 Sec to turn off power for relay 1 (0 = disabled) | |
| // #define APP_POWERON_STATE POWER_ALL_SAVED // [PowerOnState] Power On Relay state | |
| // (POWER_ALL_OFF, POWER_ALL_ON, POWER_ALL_SAVED_TOGGLE, POWER_ALL_SAVED, POWER_ALL_ALWAYS_ON, POWER_ALL_OFF_PULSETIME_ON) | |
| #define APP_BLINKTIME 10 // [BlinkTime] Time in 0.1 Sec to blink/toggle power for relay 1 | |
| #define APP_BLINKCOUNT 10 // [BlinkCount] Number of blinks (0 = 32000) | |
| #define APP_NORMAL_SLEEP false // [SetOption60] Enable normal sleep instead of dynamic sleep | |
| #define APP_SLEEP 0 // [Sleep] Sleep time to lower energy consumption (0 = Off, 1 - 250 mSec), | |
| #define PWM_MAX_SLEEP 10 // Sleep will be lowered to this value when light is on, to avoid flickering | |
| #define KEY_DEBOUNCE_TIME 50 // [ButtonDebounce] Number of mSeconds button press debounce time | |
| #define KEY_HOLD_TIME 40 // [SetOption32] Number of 0.1 seconds to hold Button or external Pushbutton before sending HOLD message | |
| #define KEY_DISABLE_MULTIPRESS false // [SetOption1] Disable button multipress | |
| #define KEY_SWAP_DOUBLE_PRESS false // [SetOption11] Swap button single and double press functionality | |
| #define KEY_ONLY_SINGLE_PRESS false // [SetOption13] Enable only single press to speed up button press recognition | |
| #define SWITCH_DEBOUNCE_TIME 50 // [SwitchDebounce] Number of mSeconds switch press debounce time | |
| #define SWITCH_MODE TOGGLE // [SwitchMode] TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON, PUSHBUTTON_INV, PUSHBUTTONHOLD, PUSHBUTTONHOLD_INV, PUSHBUTTON_TOGGLE, TOGGLEMULTI, FOLLOWMULTI, FOLLOWMULTI_INV (the wall switch state) | |
| #define TEMP_CONVERSION false // [SetOption8] Return temperature in (false = Celsius or true = Fahrenheit) | |
| #define PRESSURE_CONVERSION false // [SetOption24] Return pressure in (false = hPa or true = mmHg) | |
| #define TEMP_RESOLUTION 1 // [TempRes] Maximum number of decimals (0 - 3) showing sensor Temperature | |
| #define HUMIDITY_RESOLUTION 1 // [HumRes] Maximum number of decimals (0 - 3) showing sensor Humidity | |
| #define PRESSURE_RESOLUTION 1 // [PressRes] Maximum number of decimals (0 - 3) showing sensor Pressure | |
| #define ENERGY_RESOLUTION 3 // [EnergyRes] Maximum number of decimals (0 - 5) showing energy usage in kWh | |
| #define CALC_RESOLUTION 3 // [CalcRes] Maximum number of decimals (0 - 7) used in commands ADD, SUB, MULT and SCALE | |
| #define APP_FLASH_CYCLE false // [SetOption12] Switch between dynamic or fixed slot flash save location | |
| #define APP_NO_RELAY_SCAN false // [SetOption63] Don't scan relay power state at restart | |
| #define APP_DISABLE_POWERCYCLE false // [SetOption65] Disable fast power cycle detection for device reset | |
| #define DEEPSLEEP_BOOTCOUNT false // [SetOption76] Enable incrementing bootcount when deepsleep is enabled | |
| // -- Lights -------------------------------------- | |
| #define WS2812_LEDS 30 // [Pixels] Number of WS2812 LEDs to start with (max is 512) | |
| #define LIGHT_MODE true // [SetOption15] Switch between commands PWM or COLOR/DIMMER/CT/CHANNEL | |
| #define LIGHT_CLOCK_DIRECTION false // [SetOption16] Switch WS2812 clock between clockwise or counter-clockwise | |
| #define LIGHT_COLOR_RADIX false // [SetOption17] Switch between decimal or hexadecimal color output (false = hexadecimal, true = decimal) | |
| #define LIGHT_PAIRS_CO2 false // [SetOption18] Enable Pair light signal with CO2 sensor | |
| #define LIGHT_POWER_CONTROL false // [SetOption20] Enable power control in relation to Dimmer/Color/Ct changes | |
| #define LIGHT_CHANNEL_MODE false // [SetOption68] Enable multi-channels PWM instead of Color PWM | |
| #define LIGHT_SLIDER_POWER false // [SetOption77] Do not power off if slider moved to far left | |
| #define LIGHT_ALEXA_CT_RANGE false // [SetOption82] Reduced CT range for Alexa | |
| #define LIGHT_PWM_CT_MODE false // [SetOption92] Set PWM Mode from regular PWM to ColorTemp control (Xiaomi Philips ...) a.k.a. module 48 mode | |
| // -- Energy -------------------------------------- | |
| #define ENERGY_VOLTAGE_ALWAYS false // [SetOption21] Enable show voltage even if powered off | |
| #define ENERGY_DDS2382_MODE false // [SetOption71] Enable DDS2382 different Modbus registers for Active Energy (#6531) | |
| #define ENERGY_HARDWARE_TOTALS false // [SetOption72] Enable hardware energy total counter as reference (#6561) | |
| // -- Other Options ------------------------------- | |
| #define TIMERS_ENABLED false // [Timers] Enable Timers | |
| #define RF_DATA_RADIX false // [SetOption28] RF receive data format (false = hexadecimal, true = decimal) | |
| #define IR_DATA_RADIX false // [SetOption29] IR receive data format (false = hexadecimal, true = decimal) | |
| #define TUYA_SETOPTION_20 false // [SetOption54] Apply SetOption20 settings to Tuya device | |
| #define IR_ADD_RAW_DATA false // [SetOption58] Add IR Raw data to JSON message | |
| #define BUZZER_ENABLE false // [SetOption67] Enable buzzer when available | |
| #define DS18X20_PULL_UP false // [SetOption74] Enable internal pullup for single DS18x20 sensor | |
| #define COUNTER_RESET false // [SetOption79] Enable resetting of counters after telemetry was sent | |
| #define SHUTTER_SUPPORT false // [SetOption80] Enable shutter support | |
| #define PCF8574_INVERT_PORTS false // [SetOption81] Invert all ports on PCF8574 devices | |
| #define ZIGBEE_FRIENDLY_NAMES false // [SetOption83] Enable Zigbee FriendlyNames instead of ShortAddresses when possible | |
| /*********************************************************************************************\ | |
| * END OF SECTION 1 | |
| * | |
| * SECTION 2 | |
| * - Enable a feature by removing both // in front of it | |
| * - Disable a feature by preceding it with // | |
| \*********************************************************************************************/ | |
| // -- MQTT ---------------------------------------- | |
| #define MQTT_TELE_RETAIN 0 // Tele messages may send retain flag (0 = off, 1 = on) | |
| #define MQTT_CLEAN_SESSION 1 // Mqtt clean session connection (0 = No clean session, 1 = Clean session (default)) | |
| // -- HTTP ---------------------------------------- | |
| #define USE_WEBSERVER // Enable web server and Wifi Manager (+66k code, +8k mem) | |
| #define WEB_PORT 80 // Web server Port for User and Admin mode | |
| #define WEB_USERNAME "admin" // Web server Admin mode user name | |
| // -- Rules or Script ---------------------------- | |
| // Select none or only one of the below defines USE_RULES or USE_SCRIPT | |
| #define USE_RULES // Add support for rules (+8k code) | |
| #define USE_RULES_COMPRESSION // Compresses rules in Flash at about ~50% (+3.3k code) | |
| //#define USE_SCRIPT // Add support for script (+17k code) | |
| //#define USE_SCRIPT_FATFS 4 // Script: Add FAT FileSystem Support | |
| #define USE_EXPRESSION // Add support for expression evaluation in rules (+3k2 code, +64 bytes mem) | |
| #define SUPPORT_IF_STATEMENT // Add support for IF statement in rules (+4k2 code, -332 bytes mem) | |
| #define SUPPORT_MQTT_EVENT // Support trigger event with MQTT subscriptions (+3k5 code) | |
| /*********************************************************************************************\ | |
| * SECTION 3 | |
| * - Template to be filled in per device | |
| \*********************************************************************************************/ | |
| #define CFG_HOLDER 31483 | |
| #define MODULE TUYA_DIMMER | |
| #define MQTT_GRPTOPIC "" | |
| #define MQTT_FULLTOPIC "%prefix%/living-room/%topic%" | |
| #define MQTT_TOPIC "lightswitch" | |
| #define FRIENDLY_NAME "Living Room Dimmer Lightswitch" | |
| #define STA_SSID1 "XXXXXXXXX" | |
| #define STA_PASS1 "XXXXXXXXX" | |
| #define STA_SSID2 "" | |
| #define STA_PASS2 "" | |
| #define MQTT_HOST "XXXXXXXXX" | |
| #define NTP_SERVER1 "nl.pool.ntp.org" | |
| #define LATITUDE XXXXXXXX | |
| #define LONGITUDE XXXXXXXXX | |
| #define APP_POWERON_STATE 3 | |
| #define USE_TUYA_MCU | |
| #define TUYA_DIMMER_ID 0 | |
| #define LIGHT_POWER_CONTROL 1 | |
| #define TUYA_SETOPTION_20 1 | |
| #endif // _USER_CONFIG_OVERRIDE_H_ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment