Created
November 29, 2019 18:28
-
-
Save mkoistinen/c7c75f8b56a51e5fba059f0c44e136e6 to your computer and use it in GitHub Desktop.
NinjaFlex Settings for Prusa MK3S
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # generated by PrusaSlicer 2.1.0+ on 2019-11-29 at 18:25:13 UTC | |
| bed_temperature = 60 | |
| bridge_fan_speed = 30 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) | |
| compatible_prints = | |
| compatible_prints_condition = | |
| cooling = 0 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1.3 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FF3232 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 52.36 | |
| filament_density = 1.24 | |
| filament_deretract_speed = nil | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 7.5 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_retract_before_travel = nil | |
| filament_retract_before_wipe = nil | |
| filament_retract_layer_change = nil | |
| filament_retract_length = nil | |
| filament_retract_lift = nil | |
| filament_retract_lift_above = nil | |
| filament_retract_lift_below = nil | |
| filament_retract_restart_extra = nil | |
| filament_retract_speed = nil | |
| filament_settings_id = "NinjaFLex (EXPERIMENTAL)" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = FLEX | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| filament_wipe = nil | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 237 | |
| inherits = Generic PLA | |
| max_fan_speed = 80 | |
| min_fan_speed = 30 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode" | |
| temperature = 237 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Source: https://www.reddit.com/user/Mre64/