mkresin

CONFIG_OF_OVERLAY=y
CONFIG_OF_CONFIGFS=y

mount x /sys/kernel/config -t configfs
mkdir /sys/kernel/config/device-tree/overlays/foo

cp /boot/overlays/uart1.dtbo /lib/firmware/
echo uart1.dtbo > /sys/kernel/config/device-tree/overlay/foo/path

mkresin

#!/bin/bash

CPUS=9

function build {
	cat << EOF > .config
CONFIG_TARGET_${TARGET}=y
CONFIG_TARGET_MULTI_PROFILE=y
CONFIG_TARGET_ALL_PROFILES=y
CONFIG_TARGET_PER_DEVICE_ROOTFS=y

mkresin

#!/bin/bash

CPUS=9

function build {
	cat << EOF > .config
CONFIG_TARGET_${TARGET}=y
CONFIG_TARGET_MULTI_PROFILE=y
CONFIG_TARGET_ALL_PROFILES=y
CONFIG_TARGET_PER_DEVICE_ROOTFS=y

mkresin

Please use ```git commit --amend``` to add changes to your commit. Use ```git push --force``` to overwrite your github repository/branch. The PR will afterwards update automatically. Please don't close this PR and open a new one.

---

Please include  <[dt-bindings/gpio/gpio.h](http://lxr.free-electrons.com/source/include/dt-bindings/gpio/gpio.h?v=4.4)> here as well and keep alphabetical order..

Use the GPIO_ACTIVE_LOW and GPIO_ACTIVE_HIGH macros afterwards in stead of 1 and 0 in the gpio parameters.

Check the recent [ramips board additions](https://github.com/lede-project/source/commits/master/target/linux/ramips) for examples.

mkresin

#!/bin/sh

# Copyright (C) 2017 Mathias Kresin
#
# This is free software, licensed under the GNU General Public License v2.
#
# Test a range of pin, a single pin or all pins of either a specific GPIO
# controller or on all GPIO controller
#
# Usage:

mkresin

#!/bin/bash

TARGET="*"
WITHPREPARE=1

# compile a target and copy the directory build_dir/target-*/linux-*/linux-4.4.30/scripts/dtc/
# to your LEDE base directory
DTC=./dtc/dtc

for i in "$@"; do

mkresin

#!/bin/bash

set -e

CPUS=9
PLATFORM="$1"
PLATFORMDIR="target/linux/$PLATFORM"

function build {
	cat << EOF > .config

mkresin

diff --git a/arch/mips/lantiq/Makefile b/arch/lantiq/lantiq/Makefile
--- a/arch/mips/lantiq/Makefile
+++ b/arch/mips/lantiq/Makefile
@@ -8,5 +8,7 @@

 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o

+obj-$(CONFIG_DEBUG_FS) += bootrom.o
+
 obj-$(CONFIG_SOC_TYPE_XWAY) += xway/