John Orford mmport80

## destructuring.md

      
              1 file
            
          
              31 forks
            
          
              20 comments
            
          
              265 stars
            
          
                yang-wei
                / destructuring.md
            
            
              Last active
              February 20, 2024 04:40
            
              
                Elm Destructuring (or Pattern Matching) cheatsheet
              
          
Should be work with 0.18

Destructuring(or pattern matching) is a way used to extract data from a data structure(tuple, list, record) that mirros the construction. Compare to other languages, Elm support much less destructuring but let's see what it got !
Tuple

myTuple = ("A", "B", "C")
myNestedTuple = ("A", "B", "C", ("X", "Y", "Z"))

  
## netcat
For development it may be useful to be able to replay TCP traffic (e.g. HTTP). The dump can be created using WireShark or tcpdump:
$ tcpdump -s 0 port http -i en0 -w dump.pcap

To generate data files that can be replayed through netcat we use tcptrace:
$ tcptrace -e input.pcapng

Finally replay the HTTP traffic using netcat to host 192.168.1.1 port 80
$ cat a2b_contents.dat | nc -v 192.168.1.1 80

If you need to replay the raw network traffic, we need to do some massaging using tcpprep and tcprewrite before using tcpreplay to replay the raw packages. Note that due to limitation of tcprewrite this will not replay any traffic to the network: http://tcpreplay.synfin.net/wiki/FAQ#Doestcpreplaysupportsendingtraffictoaserver.
	For development it may be useful to be able to replay TCP traffic (e.g. HTTP). The dump can be created using WireShark or tcpdump:
	$ tcpdump -s 0 port http -i en0 -w dump.pcap

	To generate data files that can be replayed through netcat we use tcptrace:
	$ tcptrace -e input.pcapng

	Finally replay the HTTP traffic using netcat to host 192.168.1.1 port 80
	$ cat a2b_contents.dat \| nc -v 192.168.1.1 80

	If you need to replay the raw network traffic, we need to do some massaging using tcpprep and tcprewrite before using tcpreplay to replay the raw packages. Note that due to limitation of tcprewrite this will not replay any traffic to the network: http://tcpreplay.synfin.net/wiki/FAQ#Doestcpreplaysupportsendingtraffictoaserver.