The pi will fail to boot without the nofail option. Arch linux wiki recommended options
Forward a safe port to the static IP of the pi, for SSH and jellyfin
sudo apt install mosh
ssh -L 8080:localhost:9091 -p 50022 pi@sub.domain.tld # transmission
Visit localhost:8080 in browser
ffmpeg -i input.mp4 -c:v libx264 -pix_fmt yuv420p output.mp4
It appears the BT709 pixel format causes stuttering issues with playback.
See this issue
| # @mngyuan: for hardware accel for jellyfin | |
| gpu_mem=320 | |
| # @mngyuan: CRT output | |
| sdtv_mode=0 | |
| sdtv_aspect=1 | |
| enable_tvout=1 |
| # Configuration file for ddclient generated by debconf | |
| # | |
| # /etc/ddclient.conf | |
| protocol=dyndns2 | |
| use=web | |
| server=domains.google.com | |
| ssl=yes | |
| login=********* | |
| password='*********' | |
| sub.domain.tld |
| # A sample configuration for dhcpcd. | |
| # See dhcpcd.conf(5) for details. | |
| # Allow users of this group to interact with dhcpcd via the control socket. | |
| #controlgroup wheel | |
| # Inform the DHCP server of our hostname for DDNS. | |
| hostname | |
| # Use the hardware address of the interface for the Client ID. | |
| clientid | |
| # or | |
| # Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361. | |
| # Some non-RFC compliant DHCP servers do not reply with this set. | |
| # In this case, comment out duid and enable clientid above. | |
| #duid | |
| # Persist interface configuration when dhcpcd exits. | |
| persistent | |
| # Rapid commit support. | |
| # Safe to enable by default because it requires the equivalent option set | |
| # on the server to actually work. | |
| option rapid_commit | |
| # A list of options to request from the DHCP server. | |
| option domain_name_servers, domain_name, domain_search, host_name | |
| option classless_static_routes | |
| # Respect the network MTU. This is applied to DHCP routes. | |
| option interface_mtu | |
| # Most distributions have NTP support. | |
| #option ntp_servers | |
| # A ServerID is required by RFC2131. | |
| require dhcp_server_identifier | |
| # Generate SLAAC address using the Hardware Address of the interface | |
| #slaac hwaddr | |
| # OR generate Stable Private IPv6 Addresses based from the DUID | |
| slaac private | |
| # Example static IP configuration: | |
| #interface eth0 | |
| #static ip_address=192.168.0.10/24 | |
| #static ip6_address=fd51:42f8:caae:d92e::ff/64 | |
| #static routers=192.168.0.1 | |
| #static domain_name_servers=192.168.0.1 8.8.8.8 fd51:42f8:caae:d92e::1 | |
| # It is possible to fall back to a static IP if DHCP fails: | |
| # define static profile | |
| #profile static_eth0 | |
| #static ip_address=192.168.1.23/24 | |
| #static routers=192.168.1.1 | |
| #static domain_name_servers=192.168.1.1 | |
| # fallback to static profile on eth0 | |
| #interface eth0 | |
| #fallback static_eth0 | |
| interface wlan0 | |
| static ip_address=192.168.0.201/24 | |
| static routers=192.168.0.1 | |
| static domain_name_servers=1.1.1.1 |
| proc /proc proc defaults 0 0 | |
| PARTUUID=08bdd715-01 /boot vfat defaults 0 2 | |
| PARTUUID=08bdd715-02 / ext4 defaults,noatime 0 1 | |
| UUID=632D-628B /mnt/externaldrv exfat defaults,auto,users,rw,nofail,x-systemd.device-timeout=1 0 0 | |
| # a swapfile is not a swap partition, no line here | |
| # use dphys-swapfile swap[on|off] for that |