Created
December 22, 2022 15:17
-
-
Save mntmn/7d18cba485572bf0690267f37647cacb to your computer and use it in GitHub Desktop.
problem with imx8mp and qca9377 (sdio)
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [ 104.713390] ath10k_sdio mmc1:0001:1: qca9377 hw1.1 sdio target 0x05020001 chip_id 0x00000000 sub 0000:0000 | |
| [ 104.723320] ath10k_sdio mmc1:0001:1: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0 | |
| [ 104.732089] ath10k_sdio mmc1:0001:1: firmware ver WLAN.TF.1.1.1-00061-QCATFSWPZ-1 api 5 features ignore-otp crc32 7746e551 | |
| [ 104.907190] ath10k_sdio mmc1:0001:1: failed to fetch board data for bus=sdio,vendor=0271,device=0701,subsystem-vendor=0000,subsystem-device=0000 from ath10k/QCA9377/hw1.0/board-2.bin | |
| [ 104.924956] ath10k_sdio mmc1:0001:1: board_file api 1 bmi_id N/A crc32 544289f7 | |
| [ 106.030654] ath10k_sdio mmc1:0001:1: htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 | |
| [ 116.190436] mmc1: Timeout waiting for hardware interrupt. | |
| [ 116.195927] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== | |
| [ 116.202448] mmc1: sdhci: Sys addr: 0x44ed4000 | Version: 0x00000002 | |
| [ 116.208968] mmc1: sdhci: Blk size: 0x00000100 | Blk cnt: 0x0000001f | |
| [ 116.215487] mmc1: sdhci: Argument: 0x1c10e81f | Trn mode: 0x00000033 | |
| [ 116.222009] mmc1: sdhci: Present: 0x01f8820e | Host ctl: 0x00000013 | |
| [ 116.228528] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 | |
| [ 116.235047] mmc1: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f | |
| [ 116.241566] mmc1: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 | |
| [ 116.248085] mmc1: sdhci: Int enab: 0x117f110b | Sig enab: 0x117f110b | |
| [ 116.254605] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502 | |
| [ 116.261124] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000b407 | |
| [ 116.267643] mmc1: sdhci: Cmd: 0x0000353a | Max curr: 0x00ffffff | |
| [ 116.274161] mmc1: sdhci: Resp[0]: 0x00001000 | Resp[1]: 0x00000000 | |
| [ 116.280680] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
| [ 116.287199] mmc1: sdhci: Host ctl2: 0x00000088 | |
| [ 116.291698] mmc1: sdhci: ADMA Err: 0x00000003 | ADMA Ptr: 0x44a13204 | |
| [ 116.298217] mmc1: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ========= | |
| [ 116.305876] mmc1: sdhci-esdhc-imx: cmd debug status: 0x3100 | |
| [ 116.311606] mmc1: sdhci-esdhc-imx: data debug status: 0x32a0 | |
| [ 116.317422] mmc1: sdhci-esdhc-imx: trans debug status: 0x33a1 | |
| [ 116.323326] mmc1: sdhci-esdhc-imx: dma debug status: 0x3400 | |
| [ 116.329055] mmc1: sdhci-esdhc-imx: adma debug status: 0x35b4 | |
| [ 116.334872] mmc1: sdhci-esdhc-imx: fifo debug status: 0x3680 | |
| [ 116.340688] mmc1: sdhci-esdhc-imx: async fifo debug status: 0x3750 | |
| [ 116.347031] mmc1: sdhci: ============================================ | |
| [ 116.353763] ath10k_sdio mmc1:0001:1: failed to read from address 0x874: -110 | |
| [ 116.360942] ath10k_sdio mmc1:0001:1: failed to read from mbox window data address: -110 | |
| [ 116.361008] ath10k_sdio mmc1:0001:1: failed to read from address 0x868: -110 | |
| [ 116.368966] ath10k_sdio mmc1:0001:1: failed to read calibration data: -110 | |
| [ 116.376049] ath10k_sdio mmc1:0001:1: failed to read fifo/chip control register: -110 | |
| [ 116.391042] ath10k_sdio mmc1:0001:1: failed to write to address 0x1c7ec: -110 | |
| [ 116.398265] ath10k_sdio mmc1:0001:1: failed to write skb to 0x1c7ec asynchronously: -110 | |
| [ 116.406533] ath10k_sdio mmc1:0001:1: failed to write to address 0x1c7e8: -110 | |
| [ 116.413759] ath10k_sdio mmc1:0001:1: failed to write skb to 0x1c7e8 asynchronously: -110 | |
| [ 116.422006] ath10k_sdio mmc1:0001:1: failed to read from address 0x868: -110 | |
| [ 117.551846] mmc1: queuing unknown CIS tuple 0x01 [d9 01 ff] (3 bytes) | |
| [ 117.566277] mmc1: queuing unknown CIS tuple 0x1a [01 01 00 02 07] (5 bytes) | |
| [ 117.576739] mmc1: queuing unknown CIS tuple 0x1b [c1 41 30 30 ff ff 32 00] (8 bytes) | |
| [ 117.585268] mmc1: queuing unknown CIS tuple 0x14 [] (0 bytes) | |
| [ 117.604106] ath: EEPROM regdomain: 0x0 | |
| [ 117.604113] ath: EEPROM indicates default country code should be used | |
| [ 117.604117] ath: doing EEPROM country->regdmn map search | |
| [ 117.604121] ath: country maps to regdmn code: 0x3a | |
| [ 117.604125] ath: Country alpha2 being used: US | |
| [ 117.604128] ath: Regpair used: 0x3a | |
| [ 128.990532] mmc1: Timeout waiting for hardware interrupt. | |
| [ 128.996026] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== | |
| [ 129.002546] mmc1: sdhci: Sys addr: 0x4c9e2000 | Version: 0x00000002 | |
| [ 129.009067] mmc1: sdhci: Blk size: 0x00000100 | Blk cnt: 0x0000001f | |
| [ 129.015587] mmc1: sdhci: Argument: 0x1c10e81f | Trn mode: 0x00000033 | |
| [ 129.022106] mmc1: sdhci: Present: 0x01f8820e | Host ctl: 0x00000013 | |
| [ 129.028626] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 | |
| [ 129.035145] mmc1: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f | |
| [ 129.041664] mmc1: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 | |
| [ 129.051725] mmc1: sdhci: Int enab: 0x117f110b | Sig enab: 0x117f110b | |
| [ 129.061756] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502 | |
| [ 129.071784] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000b407 | |
| [ 129.081761] mmc1: sdhci: Cmd: 0x0000353a | Max curr: 0x00ffffff | |
| [ 129.091667] mmc1: sdhci: Resp[0]: 0x00001000 | Resp[1]: 0x00000000 | |
| [ 129.101547] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
| [ 129.111392] mmc1: sdhci: Host ctl2: 0x00000088 | |
| [ 129.119212] mmc1: sdhci: ADMA Err: 0x00000003 | ADMA Ptr: 0x44a13204 | |
| [ 129.129049] mmc1: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ========= | |
| [ 129.140035] mmc1: sdhci-esdhc-imx: cmd debug status: 0x3100 | |
| [ 129.149063] mmc1: sdhci-esdhc-imx: data debug status: 0x32a0 | |
| [ 129.158112] mmc1: sdhci-esdhc-imx: trans debug status: 0x33a1 | |
| [ 129.167185] mmc1: sdhci-esdhc-imx: dma debug status: 0x3400 | |
| [ 129.176045] mmc1: sdhci-esdhc-imx: adma debug status: 0x35b4 | |
| [ 129.184940] mmc1: sdhci-esdhc-imx: fifo debug status: 0x3680 | |
| [ 129.193710] mmc1: sdhci-esdhc-imx: async fifo debug status: 0x3750 | |
| [ 129.202904] mmc1: sdhci: ============================================ | |
| [ 129.212309] ath10k_warn: 8 callbacks suppressed | |
| [ 129.212319] ath10k_sdio mmc1:0001:1: failed to read from address 0x874: -110 | |
| [ 129.227869] ath10k_sdio mmc1:0001:1: failed to read from mbox window data address: -110 | |
| [ 129.227949] ath10k_sdio mmc1:0001:1: failed to read from address 0x868: -110 | |
| [ 129.235890] ath10k_sdio mmc1:0001:1: failed to read calibration data: -110 | |
| [ 129.242946] ath10k_sdio mmc1:0001:1: failed to read fifo/chip control register: -110 | |
| [ 129.265384] ath10k_sdio mmc1:0001:1: failed to write to address 0x1c7ec: -110 | |
| [ 129.274498] ath10k_sdio mmc1:0001:1: failed to write skb to 0x1c7ec asynchronously: -110 | |
| [ 129.284660] ath10k_sdio mmc1:0001:1: failed to write to address 0x1c7e8: -110 | |
| [ 129.293808] ath10k_sdio mmc1:0001:1: failed to write skb to 0x1c7e8 asynchronously: -110 | |
| [ 129.303984] ath10k_sdio mmc1:0001:1: failed to read from address 0x868: -110 | |
| [ 130.415974] mmc1: queuing unknown CIS tuple 0x01 [d9 01 ff] (3 bytes) | |
| [ 130.433429] mmc1: queuing unknown CIS tuple 0x1a [01 01 00 02 07] (5 bytes) | |
| [ 130.446842] mmc1: queuing unknown CIS tuple 0x1b [c1 41 30 30 ff ff 32 00] (8 bytes) | |
| [ 130.457549] mmc1: queuing unknown CIS tuple 0x14 [] (0 bytes) | |
| [ 134.640623] wlan0: authenticate with 50:e6:36:5c:49:ff | |
| [ 134.648213] wlan0: 80 MHz not supported, disabling VHT | |
| [ 134.689320] wlan0: send auth to 50:e6:36:5c:49:ff (try 1/3) | |
| [ 134.711368] wlan0: authenticated | |
| [ 134.718630] wlan0: associate with 50:e6:36:5c:49:ff (try 1/3) | |
| [ 134.734498] wlan0: RX AssocResp from 50:e6:36:5c:49:ff (capab=0x1431 status=0 aid=135) | |
| [ 134.747602] wlan0: associated | |
| [ 134.799458] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 50:e6:36:5c:49:ff | |
| [ 138.757808] wlan0: deauthenticated from 50:e6:36:5c:49:ff (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) | |
| [ 141.708857] wlan0: authenticate with 48:5d:35:8d:55:12 | |
| [ 141.748962] wlan0: send auth to 48:5d:35:8d:55:12 (try 1/3) | |
| [ 141.840514] wlan0: authenticate with 48:5d:35:8d:55:12 | |
| [ 141.848948] wlan0: send auth to 48:5d:35:8d:55:12 (try 1/3) | |
| [ 141.872692] wlan0: authenticated | |
| [ 141.882674] wlan0: associate with 48:5d:35:8d:55:12 (try 1/3) | |
| [ 141.898215] wlan0: RX AssocResp from 48:5d:35:8d:55:12 (capab=0x1511 status=0 aid=2) | |
| [ 141.911543] wlan0: associated | |
| [ 141.951446] wlan0: Limiting TX power to 20 (23 - 3) dBm as advertised by 48:5d:35:8d:55:12 | |
| [ 145.008514] wlan0: deauthenticated from 48:5d:35:8d:55:12 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) | |
| [ 160.366498] wlan0: authenticate with 48:5d:35:8d:55:12 | |
| [ 160.406316] wlan0: send auth to 48:5d:35:8d:55:12 (try 1/3) | |
| [ 160.496588] wlan0: authenticate with 48:5d:35:8d:55:12 | |
| [ 160.505294] wlan0: send auth to 48:5d:35:8d:55:12 (try 1/3) | |
| [ 160.528997] wlan0: authenticated | |
| [ 160.542802] wlan0: associate with 48:5d:35:8d:55:12 (try 1/3) | |
| [ 160.559986] wlan0: RX AssocResp from 48:5d:35:8d:55:12 (capab=0x1511 status=0 aid=2) | |
| [ 160.574117] wlan0: associated | |
| [ 160.588807] wlan0: Limiting TX power to 20 (23 - 3) dBm as advertised by 48:5d:35:8d:55:12 | |
| [ 163.671888] wlan0: deauthenticated from 48:5d:35:8d:55:12 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) | |
| [ 168.976078] wlan0: authenticate with 48:5d:35:8d:55:12 | |
| [ 169.015857] wlan0: send auth to 48:5d:35:8d:55:12 (try 1/3) | |
| [ 169.144755] wlan0: authenticate with 48:5d:35:8d:55:12 | |
| [ 169.153514] wlan0: send auth to 48:5d:35:8d:55:12 (try 1/3) | |
| [ 169.189032] wlan0: authenticated | |
| [ 169.198875] wlan0: associate with 48:5d:35:8d:55:12 (try 1/3) | |
| [ 169.216260] wlan0: RX AssocResp from 48:5d:35:8d:55:12 (capab=0x1511 status=0 aid=2) | |
| [ 169.230407] wlan0: associated | |
| [ 169.292746] wlan0: Limiting TX power to 20 (23 - 3) dBm as advertised by 48:5d:35:8d:55:12 | |
| [ 172.328291] wlan0: deauthenticated from 48:5d:35:8d:55:12 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) | |
| [ 177.424461] wlan0: authenticate with 48:5d:35:8d:55:12 | |
| [ 177.466513] wlan0: send auth to 48:5d:35:8d:55:12 (try 1/3) | |
| [ 177.590209] wlan0: authenticate with 48:5d:35:8d:55:12 | |
| [ 177.599196] wlan0: send auth to 48:5d:35:8d:55:12 (try 1/3) | |
| [ 177.640314] wlan0: authenticated | |
| [ 177.650781] wlan0: associate with 48:5d:35:8d:55:12 (try 1/3) | |
| [ 177.668649] wlan0: RX AssocResp from 48:5d:35:8d:55:12 (capab=0x1511 status=0 aid=2) | |
| [ 177.683538] wlan0: associated | |
| [ 177.691465] wlan0: Limiting TX power to 20 (23 - 3) dBm as advertised by 48:5d:35:8d:55:12 | |
| [ 180.780338] wlan0: deauthenticated from 48:5d:35:8d:55:12 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) | |
| [ 185.900906] wlan0: authenticate with 50:e6:36:5c:49:ff | |
| [ 185.908718] wlan0: 80 MHz not supported, disabling VHT | |
| [ 185.949853] wlan0: send auth to 50:e6:36:5c:49:ff (try 1/3) | |
| [ 185.962439] wlan0: authenticated | |
| [ 185.970831] wlan0: associate with 50:e6:36:5c:49:ff (try 1/3) | |
| [ 185.986722] wlan0: RX AssocResp from 50:e6:36:5c:49:ff (capab=0x1431 status=0 aid=135) | |
| [ 186.001296] wlan0: associated | |
| [ 186.007722] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 50:e6:36:5c:49:ff | |
| [ 190.005637] wlan0: deauthenticated from 50:e6:36:5c:49:ff (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) | |
| [ 497.939677] wlan0: authenticate with a2:e6:36:5c:49:ff | |
| [ 497.948992] wlan0: 80 MHz not supported, disabling VHT | |
| [ 497.991063] wlan0: send auth to a2:e6:36:5c:49:ff (try 1/3) | |
| [ 498.008342] wlan0: authenticated | |
| [ 498.017191] wlan0: associate with a2:e6:36:5c:49:ff (try 1/3) | |
| [ 498.093544] wlan0: RX AssocResp from a2:e6:36:5c:49:ff (capab=0x1431 status=0 aid=135) | |
| [ 498.108868] wlan0: associated | |
| [ 508.118246] wlan0: deauthenticating from a2:e6:36:5c:49:ff by local choice (Reason: 3=DEAUTH_LEAVING) | |
| [ 508.129172] mmc1: Timeout waiting for hardware interrupt. | |
| [ 508.141219] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== | |
| [ 508.151798] mmc1: sdhci: Sys addr: 0x470b28d0 | Version: 0x00000002 | |
| [ 508.162357] mmc1: sdhci: Blk size: 0x0000002c | Blk cnt: 0x00000001 | |
| [ 508.172915] mmc1: sdhci: Argument: 0x1410002c | Trn mode: 0x00000013 | |
| [ 508.183466] mmc1: sdhci: Present: 0x01d88a0a | Host ctl: 0x00000013 | |
| [ 508.194009] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 | |
| [ 508.204530] mmc1: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f | |
| [ 508.215042] mmc1: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 | |
| [ 508.225538] mmc1: sdhci: Int enab: 0x117f100b | Sig enab: 0x117f100b | |
| [ 508.236029] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502 | |
| [ 508.246515] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000b407 | |
| [ 508.256968] mmc1: sdhci: Cmd: 0x0000353a | Max curr: 0x00ffffff | |
| [ 508.267389] mmc1: sdhci: Resp[0]: 0x00001000 | Resp[1]: 0x00000000 | |
| [ 508.277766] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
| [ 508.288077] mmc1: sdhci: Host ctl2: 0x00000088 | |
| [ 508.296364] mmc1: sdhci: ADMA Err: 0x00000007 | ADMA Ptr: 0x44a13200 | |
| [ 508.306667] mmc1: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ========= | |
| [ 508.318127] mmc1: sdhci-esdhc-imx: cmd debug status: 0x3100 | |
| [ 508.327663] mmc1: sdhci-esdhc-imx: data debug status: 0x3200 | |
| [ 508.337274] mmc1: sdhci-esdhc-imx: trans debug status: 0x3300 | |
| [ 508.346938] mmc1: sdhci-esdhc-imx: dma debug status: 0x3400 | |
| [ 508.356391] mmc1: sdhci-esdhc-imx: adma debug status: 0x35b4 | |
| [ 508.365886] mmc1: sdhci-esdhc-imx: fifo debug status: 0x3610 | |
| [ 508.375316] mmc1: sdhci-esdhc-imx: async fifo debug status: 0x3751 | |
| [ 508.385264] mmc1: sdhci: ============================================ | |
| [ 508.395500] ath10k_warn: 8 callbacks suppressed | |
| [ 508.395515] ath10k_sdio mmc1:0001:1: failed to read from address 0x800: -110 | |
| [ 508.413558] ath10k_sdio mmc1:0001:1: read int status fail, start recovery | |
| [ 508.422911] ath10k_sdio mmc1:0001:1: failed to process pending SDIO interrupts: -110 | |
| [ 508.445370] ath10k_sdio mmc1:0001:1: failed to flush transmit queue (skip 1 ar-state 1): 1250 | |
| [ 518.625250] mmc1: Timeout waiting for hardware interrupt. | |
| [ 518.634387] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== | |
| [ 518.644494] mmc1: sdhci: Sys addr: 0x44ed2000 | Version: 0x00000002 | |
| [ 518.654598] mmc1: sdhci: Blk size: 0x00000100 | Blk cnt: 0x0000001f | |
| [ 518.664688] mmc1: sdhci: Argument: 0x1c10e81f | Trn mode: 0x00000033 | |
| [ 518.674768] mmc1: sdhci: Present: 0x01f8820e | Host ctl: 0x00000013 | |
| [ 518.684836] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 | |
| [ 518.694895] mmc1: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f | |
| [ 518.704913] mmc1: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 | |
| [ 518.714890] mmc1: sdhci: Int enab: 0x117f110b | Sig enab: 0x117f110b | |
| [ 518.724829] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502 | |
| [ 518.734730] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000b407 | |
| [ 518.744621] mmc1: sdhci: Cmd: 0x0000353a | Max curr: 0x00ffffff | |
| [ 518.754502] mmc1: sdhci: Resp[0]: 0x00001000 | Resp[1]: 0x00000000 | |
| [ 518.764374] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
| [ 518.774213] mmc1: sdhci: Host ctl2: 0x00000088 | |
| [ 518.782028] mmc1: sdhci: ADMA Err: 0x00000003 | ADMA Ptr: 0x44a13204 | |
| [ 518.791834] mmc1: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ========= | |
| [ 518.802778] mmc1: sdhci-esdhc-imx: cmd debug status: 0x3100 | |
| [ 518.811763] mmc1: sdhci-esdhc-imx: data debug status: 0x32a0 | |
| [ 518.820790] mmc1: sdhci-esdhc-imx: trans debug status: 0x33a1 | |
| [ 518.829896] mmc1: sdhci-esdhc-imx: dma debug status: 0x3400 | |
| [ 518.838817] mmc1: sdhci-esdhc-imx: adma debug status: 0x35b4 | |
| [ 518.847811] mmc1: sdhci-esdhc-imx: fifo debug status: 0x3680 | |
| [ 518.856775] mmc1: sdhci-esdhc-imx: async fifo debug status: 0x3750 | |
| [ 518.866234] mmc1: sdhci: ============================================ | |
| [ 518.875982] ath10k_sdio mmc1:0001:1: failed to read from address 0x874: -110 | |
| [ 518.886360] ath10k_sdio mmc1:0001:1: failed to read from mbox window data address: -110 | |
| [ 518.886454] ath10k_sdio mmc1:0001:1: failed to read from address 0x868: -110 | |
| [ 518.894426] ath10k_sdio mmc1:0001:1: failed to read calibration data: -110 | |
| [ 518.901469] ath10k_sdio mmc1:0001:1: failed to read fifo/chip control register: -110 | |
| [ 518.924574] ath10k_sdio mmc1:0001:1: failed to write to address 0x1c7ec: -110 | |
| [ 518.933858] ath10k_sdio mmc1:0001:1: failed to write skb to 0x1c7ec asynchronously: -110 | |
| [ 518.944157] ath10k_sdio mmc1:0001:1: failed to write to address 0x828: -110 | |
| [ 518.953239] ath10k_sdio mmc1:0001:1: failed to write skb to 0x828 asynchronously: -110 | |
| [ 518.963311] ath10k_sdio mmc1:0001:1: failed to read from address 0x868: -110 | |
| [ 519.118639] mmc1: queuing unknown CIS tuple 0x01 [d9 01 ff] (3 bytes) | |
| [ 519.136064] mmc1: queuing unknown CIS tuple 0x1a [01 01 00 02 07] (5 bytes) | |
| [ 519.149527] mmc1: queuing unknown CIS tuple 0x1b [c1 41 30 30 ff ff 32 00] (8 bytes) | |
| [ 519.159980] mmc1: queuing unknown CIS tuple 0x14 [] (0 bytes) | |
| [ 519.180822] ieee80211 phy0: Hardware restart was requested | |
| [ 529.377337] mmc1: Timeout waiting for hardware interrupt. | |
| [ 529.385789] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== | |
| [ 529.395245] mmc1: sdhci: Sys addr: 0x42c4be80 | Version: 0x00000002 | |
| [ 529.404717] mmc1: sdhci: Blk size: 0x00000004 | Blk cnt: 0x00000001 | |
| [ 529.413179] mmc1: sdhci: Argument: 0x1410d004 | Trn mode: 0x00000013 | |
| [ 529.421632] mmc1: sdhci: Present: 0x01f8820e | Host ctl: 0x00000013 | |
| [ 529.430084] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 | |
| [ 529.438535] mmc1: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f | |
| [ 529.446983] mmc1: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 | |
| [ 529.455439] mmc1: sdhci: Int enab: 0x117f100b | Sig enab: 0x117f100b | |
| [ 529.463895] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502 | |
| [ 529.472351] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000b407 | |
| [ 529.480789] mmc1: sdhci: Cmd: 0x0000353a | Max curr: 0x00ffffff | |
| [ 529.489215] mmc1: sdhci: Resp[0]: 0x00001200 | Resp[1]: 0x00000000 | |
| [ 529.497644] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 | |
| [ 529.506060] mmc1: sdhci: Host ctl2: 0x00000088 | |
| [ 529.512469] mmc1: sdhci: ADMA Err: 0x00000003 | ADMA Ptr: 0x44a13204 | |
| [ 529.520897] mmc1: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ========= | |
| [ 529.530492] mmc1: sdhci-esdhc-imx: cmd debug status: 0x3100 | |
| [ 529.538172] mmc1: sdhci-esdhc-imx: data debug status: 0x32a0 | |
| [ 529.545927] mmc1: sdhci-esdhc-imx: trans debug status: 0x33a1 | |
| [ 529.553751] mmc1: sdhci-esdhc-imx: dma debug status: 0x3400 | |
| [ 529.561384] mmc1: sdhci-esdhc-imx: adma debug status: 0x35b4 | |
| [ 529.569095] mmc1: sdhci-esdhc-imx: fifo debug status: 0x3680 | |
| [ 529.576783] mmc1: sdhci-esdhc-imx: async fifo debug status: 0x3750 | |
| [ 529.584987] mmc1: sdhci: ============================================ | |
| [ 529.593384] ath10k_warn: 18 callbacks suppressed | |
| [ 529.593392] ath10k_sdio mmc1:0001:1: failed to read from address 0x868: -110 | |
| [ 529.609059] ath10k_sdio mmc1:0001:1: failed to read fifo/chip control register: -110 | |
| [ 529.618891] ath10k_sdio mmc1:0001:1: failed to write to address 0x1c7e4: -84 | |
| [ 529.627978] ath10k_sdio mmc1:0001:1: failed to write skb to 0x1c7e4 asynchronously: -84 | |
| [ 530.792715] ath10k_sdio mmc1:0001:1: hif read32 not supported | |
| [ 530.801483] ath10k_sdio mmc1:0001:1: hif read32 not supported | |
| [ 530.810242] ath10k_sdio mmc1:0001:1: hif read32 not supported | |
| [ 530.818966] ath10k_sdio mmc1:0001:1: failed to set coverage class: expected integer microsecond value in register | |
| [ 530.845931] ath10k_sdio mmc1:0001:1: device successfully recovered | |
| [ 533.735121] wlan0: authenticate with 50:e6:36:5c:49:ff | |
| [ 533.743964] wlan0: 80 MHz not supported, disabling VHT | |
| [ 533.785248] wlan0: send auth to 50:e6:36:5c:49:ff (try 1/3) | |
| [ 533.799585] wlan0: authenticated | |
| [ 533.813494] wlan0: associate with 50:e6:36:5c:49:ff (try 1/3) | |
| [ 533.830524] wlan0: RX AssocResp from 50:e6:36:5c:49:ff (capab=0x1431 status=0 aid=135) | |
| [ 533.845689] wlan0: associated | |
| [ 533.856767] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 50:e6:36:5c:49:ff | |
| [ 537.860712] wlan0: deauthenticated from 50:e6:36:5c:49:ff (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) | |
| [ 545.739256] wlan0: authenticate with 48:5d:35:8d:55:12 | |
| [ 545.779544] wlan0: send auth to 48:5d:35:8d:55:12 (try 1/3) | |
| [ 545.874712] wlan0: authenticate with 48:5d:35:8d:55:12 | |
| [ 545.883215] wlan0: send auth to 48:5d:35:8d:55:12 (try 1/3) | |
| [ 545.907746] wlan0: authenticated | |
| [ 545.917486] wlan0: associate with 48:5d:35:8d:55:12 (try 1/3) | |
| [ 545.934239] wlan0: RX AssocResp from 48:5d:35:8d:55:12 (capab=0x1511 status=0 aid=2) | |
| [ 545.949353] wlan0: associated | |
| [ 546.025407] wlan0: Limiting TX power to 20 (23 - 3) dBm as advertised by 48:5d:35:8d:55:12 | |
| [ 549.043525] wlan0: deauthenticated from 48:5d:35:8d:55:12 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment