modjo756

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by xf86-video-sunxifb configure 0.3.1, which was
generated by GNU Autoconf 2.68.  Invocation command line was

  $ ./configure --prefix=/usr

## --------- ##
## Platform. ##

modjo756

MACHINE ??= 'udooneo'
DISTRO ?= 'poky'
PACKAGE_CLASSES ?= "package_rpm"
EXTRA_IMAGE_FEATURES = "debug-tweaks"
USER_CLASSES ?= "buildstats image-mklibs"
PATCHRESOLVE = "noop"
BB_DISKMON_DIRS = "\
    STOPTASKS,${TMPDIR},1G,100K \
    STOPTASKS,${DL_DIR},1G,100K \
    STOPTASKS,${SSTATE_DIR},1G,100K \

modjo756

require qt5.inc
require qt5-git.inc

# There are no LGPLv3-only licensed files in this component.
# There are no GPLv2 licensed files in this component.
LICENSE = "GFDL-1.3 & BSD & (LGPL-2.1 & The-Qt-Company-Qt-LGPL-Exception-1.1 | LGPL-3.0)"
LIC_FILES_CHKSUM = " \
    file://LICENSE.LGPLv3;md5=b8c75190712063cde04e1f41b6fdad98 \
    file://LICENSE.GPLv3;md5=40f9bf30e783ddc201497165dfb32afb \
    file://LICENSE.FDL;md5=f70ee9a6c44ae8917586fea34dff0ab5 \

modjo756

require qt5.inc
require qt5-git.inc

LICENSE = "GFDL-1.3 & BSD & LGPL-3.0"
LIC_FILES_CHKSUM = " \
    file://LICENSE.LGPLv3;md5=8ba7f2099d17d636d5fcc8303bb17587 \
    file://LICENSE.GPLv3;md5=40f9bf30e783ddc201497165dfb32afb \
    file://LICENSE.FDL;md5=6d9f2a9af4c8b8c3c769f6cc1b6aaf7e \
"

modjo756

#ifndef QCAN_H
#define QCAN_H

#include <QObject>
#include <QtSerialBus>

typedef struct //CAN message struct

       {
            quint16 i_length; // --> size of packet

modjo756

#include "qcan.h"
#include <QDebug>
#include <QProcess>

QCan::QCan(QObject *parent) : QObject(parent), m_canDevice(Q_NULLPTR)
{
    m_sCan=structCan();
}

QCan::~QCan()

modjo756

#ifndef NEOSENSORSREGISTERS_H
#define NEOSENSORSREGISTERS_H

//This file contains all the registers used by fxos8700cq and fxas2100c"""

#define GYRO                 0x01
#define ACC                  0x02
#define MAG                  0x03

#define I2C_AM_ADDRESS 0x1e	// I2C accelerometer/magnetometer address

modjo756

DEBUG: Executing shell function do_compile
NOTE: make -j 4 MAKEFLAGS=-j 4 OE_QMAKE_COMPILER=arm-poky-linux-gnueabi-gcc  -march=armv7-a -marm -mfpu=neon  -mfloat-abi=hard -mcpu=cortex-a9 --sysroot=/home/mls/udoo-community-bsp/SA62/tmp/sysroots/secosbca62 OE_QMAKE_CC=arm-poky-linux-gnueabi-gcc  -march=armv7-a -marm -mfpu=neon  -mfloat-abi=hard -mcpu=cortex-a9 --sysroot=/home/mls/udoo-community-bsp/SA62/tmp/sysroots/secosbca62 OE_QMAKE_CXX=arm-poky-linux-gnueabi-g++  -march=armv7-a -marm -mfpu=neon  -mfloat-abi=hard -mcpu=cortex-a9 --sysroot=/home/mls/udoo-community-bsp/SA62/tmp/sysroots/secosbca62 OE_QMAKE_CFLAGS= -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/mls/udoo-community-bsp/SA62/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/qtquickcontrols2/5.6.1+gitAUTOINC+fec1a78618-r0=/usr/src/debug/qtquickcontrols2/5.6.1+gitAUTOINC+fec1a78618-r0 -fdebug-prefix-map=/home/mls/udoo-community-bsp/SA62/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/mls/udoo-community-bsp/SA62/tmp/sysroots/secosb

modjo756

--- git.orig/arch/arm/boot/dts/imx6qdl-seco_SBC_A62.dtsi	2016-10-03 10:53:07.000000000 +0200
+++ git/arch/arm/boot/dts/imx6qdl-seco_SBC_A62.dtsi	2016-10-06 13:42:01.499875220 +0200
@@ -24,11 +24,16 @@
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc1;
 		mmc3 = &usdhc4;
+		spi0 = &ecspi2;
 	};
 
 	memory {

modjo756

U-Boot SPL 2016.07+fslc+ge6b4241 (Nov 10 2016 - 17:21:53)
Trying to boot from MMC1


U-Boot 2016.07+fslc+ge6b4241 (Nov 10 2016 - 17:21:53 +0100)

CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: WDOG
Board: Seco SBC-A62-J-QUAD
       Watchdog enabled