dmesg fastboot Pixel3a

fastboot oem dmesg
(bootloader) UEFI Start     [  725] SEC
(bootloader) ASLR        : On
(bootloader) DEP         : Off
(bootloader) Timer Delta : +0 mS
(bootloader) RAM Entry 0 : Base 0x0000000080000000  Size 0x0000000080000
(bootloader) 000
(bootloader) RAM Entry 1 : Base 0x0000000100000000  Size 0x000000007E2C0
(bootloader) 000
(bootloader) UEFI Ver    : 5.0.210923.BOOT.XF.2.1-00134-SDM710LZB-2
(bootloader) Build Info  : 64b Sep 23 2021 02:48:51
(bootloader) Boot Device : eMMC
(bootloader) PROD Mode   : TRUE
(bootloader) Retail      : TRUE
(bootloader) PM0: 27, PM1: 26,
(bootloader) OEMPanel_PowerUp
(bootloader) DisplayDxe: Resolution 1080x2220 (1 intf)
(bootloader) DSI read: address: 0x0A, readback: 0x9C, uRetryCount: 1
(bootloader) OEMPanel_SetBacklightLevel: percentage 38, brightness code
(bootloader) 0x187
(bootloader) APC1 IDDQ WC 0 , L2:6, CPU[0]:52, CPU[1]:52
(bootloader)  APC1 Total 110
(bootloader) LoadSys  TIME 0ms
(bootloader) ISENSE TOTAL TIME 0ms
(bootloader) ERROR - DALSYS_GetDALPropertyHandleStr() failed!
(bootloader) GPI tgt info initialization failed!
(bootloader) -----------------------------
(bootloader) Platform Init  [ 1315] BDS
(bootloader) Platform   : OEM
(bootloader) Chip Name  : SDM670
(bootloader) Chip Ver   : 1.1
(bootloader) Core 0 Freq: 1708 MHz
(bootloader) -----------------------------
(bootloader) smem_get_addr: SMEM get addr failed! smem_type=105UEFI Tota
(bootloader) l : 603 ms
(bootloader) POST Time      [ 1328] OS Loader
(bootloader) Error: liblpc: unable to open partition
(bootloader) PinCtrl:23 type 3 val 0
(bootloader) PinCtrl:4 type 3 val 0
(bootloader) ABL version: b4s4-0.4-7758097
(bootloader) ABL build time: Sep 23 2021 02:47:47
(bootloader) Reset REASON 2
(bootloader) Error: liblpc: unable to open partition
(bootloader) PinCtrl:23 type 3 val 0
(bootloader) PinCtrl:4 type 3 val 0
(bootloader) Error: liblpc: unable to open partition
(bootloader) PinCtrl:23 type 3 val 0
(bootloader) PinCtrl:4 type 3 val 0
(bootloader) Enter reason of bootloader mode: reboot bootloader
(bootloader) qusb2_1: tune1: 103
(bootloader) qusb2_1: hstx: 5
(bootloader) PLL1 locked: 5
(bootloader) usb_lane: 1
(bootloader) ssusb_phy_init_timeout: 0
(bootloader) InitSSUSBPhy: Init SSUSBPhy Enable Error
(bootloader) Fastboot device connected
(bootloader) OEMPanel_SetBacklightLevel: percentage 20, brightness code
(bootloader) 0xCF
(bootloader) OEMPanel_SetBacklightLevel: percentage 38, brightness code
(bootloader) 0x187
(bootloader) AcceptCmd:oem dmesg
OKAY [  0.159s]
Finished. Total time: 0.159s