Synner_ET

#include <EasyTransfer.h>
#define LENGTH_OF_ARRAY(x)((sizeof(x) / sizeof(x[0])))

//create object
EasyTransfer ET;

struct SEND_DATA_STRUCTURE {
 //put your variable definitions here for the data you want to send
 //THIS MUST BE EXACTLY THE SAME ON THE OTHER ARDUINO
 int arraydata[5];
};

//give a name to the group of data
SEND_DATA_STRUCTURE mydata;

void setup() {
 Serial1.begin(57600);
 //start the library, pass in the data details and the name of the serial port. Can be Serial, Serial1, Serial2, etc.
 ET.begin(details(mydata), &Serial1);
}

void loop() {
 //this is how you access the variables. [name of the group].[variable name]
  int arraydata[] = {0x31,0x32,0x33,0x34,0x35};
  memcpy(mydata.arraydata, arraydata, sizeof(arraydata));
 //send the data
 ET.sendData();
 //  Serial.println(mydata.arraydata[2], HEX);
 for (uint8_t channel = 0; channel < LENGTH_OF_ARRAY(arraydata); channel++) {
  Serial.print("arraydata[");
  Serial.print(channel);
  Serial.print("]=");
  Serial.print(arraydata[channel], HEX);
  Serial.print(", mydata.arraydata[");
  Serial.print(channel);
  Serial.print("]=");
  Serial.println(mydata.arraydata[channel], HEX);
  delay(1000);
 }
}