Created
March 25, 2024 19:07
-
-
Save mrnuke/225375c1cd144d9aa7cb632e5e9fd78f to your computer and use it in GitHub Desktop.
ip95xx-clock-fail-messages
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 3.951518] qca_ssdk: loading out-of-tree module taints kernel. | |
[ 3.959438] ssdk_dt_parse_interrupt[912]:INFO:intr-gpio does not exist | |
[ 3.959891] ssdk_dt_parse_led[1231]:INFO:current dts led_source_num is 0 | |
[ 3.965067] ssdk_clock_rate_set_and_enable[61]:INFO:UNIPHY 1 is not available on this SKU! | |
[ 3.971764] ssdk_clock_rate_set_and_enable[61]:INFO:UNIPHY 1 is not available on this SKU! | |
[ 3.981561] ------------[ cut here ]------------ | |
[ 3.988025] nss_cc_port5_rx_clk status stuck at 'off' | |
[ 3.988047] WARNING: CPU: 0 PID: 463 at drivers/clk/qcom/clk-branch.c:87 clk_branch_toggle+0x140/0x150 | |
[ 3.997751] Modules linked in: qca_ssdk(O+) | |
[ 4.006949] CPU: 0 PID: 463 Comm: udevd Tainted: G O 6.8.1 #112 | |
[ 4.011030] Hardware name: TP_Link BE550 (DT) | |
[ 4.018320] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 4.022835] pc : clk_branch_toggle+0x140/0x150 | |
[ 4.029605] lr : clk_branch_toggle+0x140/0x150 | |
[ 4.034119] sp : ffffffc08351b680 | |
[ 4.038544] x29: ffffffc08351b680 x28: 0000000000000001 x27: ffffffc079a2dbb8 | |
[ 4.041934] x26: ffffffc0799cbd18 x25: 0000000000000000 x24: 0000000000000001 | |
[ 4.049051] x23: ffffffc08094b618 x22: 0000000000000001 x21: ffffffc081864f60 | |
[ 4.056170] x20: ffffffc08043243c x19: 0000000000000000 x18: fffffffffffc27e7 | |
[ 4.063287] x17: 6c62616c69617661 x16: 20746f6e20736920 x15: 0000000000000006 | |
[ 4.070406] x14: ffffffc0817d6c28 x13: 000000000000009b x12: 000000000000009b | |
[ 4.077524] x11: 00000000ffffffea x10: ffffffc08182ec28 x9 : 0000000000000001 | |
[ 4.084641] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001 | |
[ 4.091760] x5 : ffffff803fd75490 x4 : 0000000000000000 x3 : 0000000000000027 | |
[ 4.098878] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000029 | |
[ 4.105995] Call trace: | |
[ 4.113110] clk_branch_toggle+0x140/0x150 | |
[ 4.115368] clk_branch2_enable+0x1c/0x28 | |
[ 4.119534] clk_core_enable+0x6c/0xac | |
[ 4.123613] clk_enable+0x28/0x54 | |
[ 4.127259] ssdk_uniphy_clock_enable.part.0+0x13c/0x180 [qca_ssdk] | |
[ 4.130648] ssdk_uniphy_clock_enable+0x38/0x90 [qca_ssdk] | |
[ 4.136723] ssdk_ppe_uniphy_clock_init.part.0+0xdc/0xe0 [qca_ssdk] | |
[ 4.142279] ssdk_gcc_clock_init+0x98/0x1d8 [qca_ssdk] | |
[ 4.148442] ssdk_plat_init+0x1c4/0x22c [qca_ssdk] | |
[ 4.153649] regi_init+0x190/0x1000 [qca_ssdk] | |
[ 4.158424] do_one_initcall+0x68/0x1f4 | |
[ 4.162849] do_init_module+0x58/0x1d8 | |
[ 4.166583] load_module+0x1b28/0x1bcc | |
[ 4.170401] init_module_from_file+0x74/0x98 | |
[ 4.174135] __arm64_sys_finit_module+0x13c/0x2fc | |
[ 4.178563] invoke_syscall.constprop.0+0x5c/0x104 | |
[ 4.183163] do_el0_svc+0x40/0xc8 | |
[ 4.187850] el0_svc+0x28/0x98 | |
[ 4.191234] el0t_64_sync_handler+0x120/0x12c | |
[ 4.194188] el0t_64_sync+0x178/0x17c | |
[ 4.198615] ---[ end trace 0000000000000000 ]--- | |
[ 4.202297] ssdk_uniphy_clock_enable[256]:ERROR:clock enable fail! | |
[ 4.207279] ------------[ cut here ]------------ | |
[ 4.212939] nss_cc_port5_tx_clk status stuck at 'off' | |
[ 4.212960] WARNING: CPU: 0 PID: 463 at drivers/clk/qcom/clk-branch.c:87 clk_branch_toggle+0x140/0x150 | |
[ 4.222665] Modules linked in: qca_ssdk(O+) | |
[ 4.231863] CPU: 0 PID: 463 Comm: udevd Tainted: G W O 6.8.1 #112 | |
[ 4.235943] Hardware name: TP_Link BE550 (DT) | |
[ 4.243233] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 4.247749] pc : clk_branch_toggle+0x140/0x150 | |
[ 4.254517] lr : clk_branch_toggle+0x140/0x150 | |
[ 4.259031] sp : ffffffc08351b680 | |
[ 4.263457] x29: ffffffc08351b680 x28: 0000000000000001 x27: ffffffc079a2dbb8 | |
[ 4.266847] x26: ffffffc0799cbd18 x25: 0000000000000000 x24: 0000000000000001 | |
[ 4.273964] x23: ffffffc08094b600 x22: 0000000000000001 x21: ffffffc081864f20 | |
[ 4.281082] x20: ffffffc08043243c x19: 0000000000000000 x18: fffffffffffc3177 | |
[ 4.288200] x17: 6c62616c69617661 x16: 20746f6e20736920 x15: 0000000000000006 | |
[ 4.295319] x14: ffffffc0817d6c28 x13: 00000000000000c6 x12: 00000000000000c6 | |
[ 4.302437] x11: 00000000ffffffea x10: ffffffc08182ec28 x9 : 0000000000000001 | |
[ 4.309555] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001 | |
[ 4.316673] x5 : ffffff803fd75490 x4 : 0000000000000000 x3 : 0000000000000027 | |
[ 4.323791] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000029 | |
[ 4.330910] Call trace: | |
[ 4.338021] clk_branch_toggle+0x140/0x150 | |
[ 4.340280] clk_branch2_enable+0x1c/0x28 | |
[ 4.344447] clk_core_enable+0x6c/0xac | |
[ 4.348527] clk_enable+0x28/0x54 | |
[ 4.352172] ssdk_uniphy_clock_enable.part.0+0x13c/0x180 [qca_ssdk] | |
[ 4.355560] ssdk_uniphy_clock_enable+0x38/0x90 [qca_ssdk] | |
[ 4.361636] ssdk_ppe_uniphy_clock_init.part.0+0xdc/0xe0 [qca_ssdk] | |
[ 4.367192] ssdk_gcc_clock_init+0x98/0x1d8 [qca_ssdk] | |
[ 4.373354] ssdk_plat_init+0x1c4/0x22c [qca_ssdk] | |
[ 4.378564] regi_init+0x190/0x1000 [qca_ssdk] | |
[ 4.383337] do_one_initcall+0x68/0x1f4 | |
[ 4.387762] do_init_module+0x58/0x1d8 | |
[ 4.391495] load_module+0x1b28/0x1bcc | |
[ 4.395315] init_module_from_file+0x74/0x98 | |
[ 4.399049] __arm64_sys_finit_module+0x13c/0x2fc | |
[ 4.403476] invoke_syscall.constprop.0+0x5c/0x104 | |
[ 4.408076] do_el0_svc+0x40/0xc8 | |
[ 4.412762] el0_svc+0x28/0x98 | |
[ 4.416147] el0t_64_sync_handler+0x120/0x12c | |
[ 4.419101] el0t_64_sync+0x178/0x17c | |
[ 4.423526] ---[ end trace 0000000000000000 ]--- | |
[ 4.427194] ssdk_uniphy_clock_enable[256]:ERROR:clock enable fail! | |
[ 4.432361] ------------[ cut here ]------------ | |
[ 4.437852] nss_cc_uniphy_port5_rx_clk status stuck at 'off' | |
[ 4.437870] WARNING: CPU: 0 PID: 463 at drivers/clk/qcom/clk-branch.c:87 clk_branch_toggle+0x140/0x150 | |
[ 4.448272] Modules linked in: qca_ssdk(O+) | |
[ 4.457382] CPU: 0 PID: 463 Comm: udevd Tainted: G W O 6.8.1 #112 | |
[ 4.461464] Hardware name: TP_Link BE550 (DT) | |
[ 4.468754] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 4.473270] pc : clk_branch_toggle+0x140/0x150 | |
[ 4.480037] lr : clk_branch_toggle+0x140/0x150 | |
[ 4.484552] sp : ffffffc08351b680 | |
[ 4.488977] x29: ffffffc08351b680 x28: 0000000000000001 x27: ffffffc079a2dbb8 | |
[ 4.492367] x26: ffffffc0799cbd18 x25: 0000000000000000 x24: 0000000000000001 | |
[ 4.499485] x23: ffffffc08094b170 x22: 0000000000000001 x21: ffffffc0818644a0 | |
[ 4.506604] x20: ffffffc08043243c x19: 0000000000000000 x18: fffffffffffc3b0f | |
[ 4.513721] x17: 6c62616c69617661 x16: 20746f6e20736920 x15: 0000000000000006 | |
[ 4.520839] x14: ffffffc0817d6c28 x13: 00000000000000f1 x12: 00000000000000f1 | |
[ 4.527957] x11: 00000000ffffffea x10: ffffffc08182ec28 x9 : 0000000000000001 | |
[ 4.535076] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001 | |
[ 4.542193] x5 : ffffff803fd75490 x4 : 0000000000000000 x3 : 0000000000000027 | |
[ 4.549311] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000030 | |
[ 4.556429] Call trace: | |
[ 4.563543] clk_branch_toggle+0x140/0x150 | |
[ 4.565802] clk_branch2_enable+0x1c/0x28 | |
[ 4.569968] clk_core_enable+0x6c/0xac | |
[ 4.574047] clk_enable+0x28/0x54 | |
[ 4.577692] ssdk_uniphy_clock_enable.part.0+0x13c/0x180 [qca_ssdk] | |
[ 4.581081] ssdk_uniphy_clock_enable+0x38/0x90 [qca_ssdk] | |
[ 4.587156] ssdk_ppe_uniphy_clock_init.part.0+0xdc/0xe0 [qca_ssdk] | |
[ 4.592713] ssdk_gcc_clock_init+0x98/0x1d8 [qca_ssdk] | |
[ 4.598875] ssdk_plat_init+0x1c4/0x22c [qca_ssdk] | |
[ 4.604084] regi_init+0x190/0x1000 [qca_ssdk] | |
[ 4.608858] do_one_initcall+0x68/0x1f4 | |
[ 4.613283] do_init_module+0x58/0x1d8 | |
[ 4.617017] load_module+0x1b28/0x1bcc | |
[ 4.620836] init_module_from_file+0x74/0x98 | |
[ 4.624569] __arm64_sys_finit_module+0x13c/0x2fc | |
[ 4.628997] invoke_syscall.constprop.0+0x5c/0x104 | |
[ 4.633597] do_el0_svc+0x40/0xc8 | |
[ 4.638284] el0_svc+0x28/0x98 | |
[ 4.641668] el0t_64_sync_handler+0x120/0x12c | |
[ 4.644622] el0t_64_sync+0x178/0x17c | |
[ 4.649047] ---[ end trace 0000000000000000 ]--- | |
[ 4.652711] ssdk_uniphy_clock_enable[256]:ERROR:clock enable fail! | |
[ 4.657703] ------------[ cut here ]------------ | |
[ 4.663371] nss_cc_uniphy_port5_tx_clk status stuck at 'off' | |
[ 4.663390] WARNING: CPU: 0 PID: 463 at drivers/clk/qcom/clk-branch.c:87 clk_branch_toggle+0x140/0x150 | |
[ 4.673793] Modules linked in: qca_ssdk(O+) | |
[ 4.682903] CPU: 0 PID: 463 Comm: udevd Tainted: G W O 6.8.1 #112 | |
[ 4.686985] Hardware name: TP_Link BE550 (DT) | |
[ 4.694274] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 4.698791] pc : clk_branch_toggle+0x140/0x150 | |
[ 4.705559] lr : clk_branch_toggle+0x140/0x150 | |
[ 4.710073] sp : ffffffc08351b680 | |
[ 4.714499] x29: ffffffc08351b680 x28: 0000000000000001 x27: ffffffc079a2dbb8 | |
[ 4.717888] x26: ffffffc0799cbd18 x25: 0000000000000000 x24: 0000000000000001 | |
[ 4.725005] x23: ffffffc08094b150 x22: 0000000000000001 x21: ffffffc081864460 | |
[ 4.732124] x20: ffffffc08043243c x19: 0000000000000000 x18: fffffffffffc44a7 | |
[ 4.739243] x17: 6c62616c69617661 x16: 20746f6e20736920 x15: 0000000000000006 | |
[ 4.746360] x14: ffffffc0817d6c28 x13: 000000000000011c x12: 000000000000011c | |
[ 4.753478] x11: 00000000ffffffea x10: ffffffc08182ec28 x9 : 0000000000000001 | |
[ 4.760596] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001 | |
[ 4.767714] x5 : ffffff803fd75490 x4 : 0000000000000000 x3 : 0000000000000027 | |
[ 4.774833] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000030 | |
[ 4.781951] Call trace: | |
[ 4.789063] clk_branch_toggle+0x140/0x150 | |
[ 4.791322] clk_branch2_enable+0x1c/0x28 | |
[ 4.795489] clk_core_enable+0x6c/0xac | |
[ 4.799568] clk_enable+0x28/0x54 | |
[ 4.803214] ssdk_uniphy_clock_enable.part.0+0x13c/0x180 [qca_ssdk] | |
[ 4.806603] ssdk_uniphy_clock_enable+0x38/0x90 [qca_ssdk] | |
[ 4.812678] ssdk_ppe_uniphy_clock_init.part.0+0xdc/0xe0 [qca_ssdk] | |
[ 4.818234] ssdk_gcc_clock_init+0x98/0x1d8 [qca_ssdk] | |
[ 4.824396] ssdk_plat_init+0x1c4/0x22c [qca_ssdk] | |
[ 4.829604] regi_init+0x190/0x1000 [qca_ssdk] | |
[ 4.834378] do_one_initcall+0x68/0x1f4 | |
[ 4.838804] do_init_module+0x58/0x1d8 | |
[ 4.842537] load_module+0x1b28/0x1bcc | |
[ 4.846356] init_module_from_file+0x74/0x98 | |
[ 4.850089] __arm64_sys_finit_module+0x13c/0x2fc | |
[ 4.854517] invoke_syscall.constprop.0+0x5c/0x104 | |
[ 4.859118] do_el0_svc+0x40/0xc8 | |
[ 4.863804] el0_svc+0x28/0x98 | |
[ 4.867189] el0t_64_sync_handler+0x120/0x12c | |
[ 4.870142] el0t_64_sync+0x178/0x17c | |
[ 4.874568] ---[ end trace 0000000000000000 ]--- | |
[ 4.878229] ssdk_uniphy_clock_enable[256]:ERROR:clock enable fail! | |
[ 4.883031] ssdk_uniphy_port5_clock_source_set[1071]:ERROR:set parent fail! | |
[ 4.888915] ssdk_uniphy_port5_clock_source_set[1071]:ERROR:set parent fail! | |
[ 4.897106] qcom_wdt b017000.watchdog: failed to get input clock | |
[ 4.902907] qcom_wdt b017000.watchdog: failed to get input clock | |
[ 5.136488] qca_appe_tdm_hw_init[302]:INFO:appe scheduler tdm mode =1 | |
[ 5.136520] qca_appe_tdm_hw_init[344]:INFO:appe tdm setup num=100 | |
[ 5.346232] ssdk_uniphy_raw_clock_set[1040]:ERROR:set parent fail! | |
[ 5.346262] ssdk_uniphy_raw_clock_set[1040]:ERROR:set parent fail! | |
[ 5.711200] qca_hppe_interface_mode_init[1475]:INFO:appe interface mode initialization | |
[ 6.044263] qca_appe_portctrl_hw_init[412]:INFO:appe portctrl initialization | |
[ 6.046944] qca_appe_rss_hash_hw_init[600]:INFO:appe rss hash initialization: hash_seed 0xdd289266 | |
[ 6.050377] regi_init[3595]:INFO:Initializing APPE Done!! | |
[ 6.059197] regi_init[3662]:INFO:qca-ssdk module init succeeded! | |
[ 6.071118] qcom_wdt b017000.watchdog: failed to get input clock | |
[ 6.084607] GMAC1(ffffff8001eb48c0) Invalid MAC@ - using 2e:27:6f:36:55:a6 | |
[ 6.084680] (unnamed net_device) (uninitialized): netif_napi_add_weight() called with weight 128 | |
[ 6.092112] qcom_wdt b017000.watchdog: failed to get input clock | |
[ 6.092744] GMAC2(ffffff8000a7d8c0) Invalid MAC@ - using 32:9d:61:a6:3b:ef | |
[ 6.099532] qcom_wdt b017000.watchdog: failed to get input clock | |
[ 6.106296] GMAC3(ffffff80065678c0) Invalid MAC@ - using de:e1:12:70:47:d1 | |
[ 6.112321] qcom_wdt b017000.watchdog: failed to get input clock | |
[ 6.119316] GMAC4(ffffff80065628c0) Invalid MAC@ - using ee:f7:47:23:a2:3f | |
[ 6.125022] qcom_wdt b017000.watchdog: failed to get input clock | |
[ 6.132035] GMAC6(ffffff80065778c0) Invalid MAC@ - using fe:7b:01:dd:35:d5 | |
[ 6.137867] qcom_wdt b017000.watchdog: failed to get input clock | |
[ 6.216334] ********************************************************** | |
[ 6.216355] * NSS Data Plane driver | |
[ 6.216432] qcom_wdt b017000.watchdog: failed to get input clock | |
[ 6.221736] ********************************************************** | |
[ 16.474416] qcom_wdt b017000.watchdog: failed to get input clock | |
[ 16.474495] platform b017000.watchdog: deferred probe pending: (reason unknown) | |
[ 1666.234301] nss-dp 3a508000.dp3 eth2: PHY Link up speed: 1000 | |
[ 1667.274229] _adpt_hppe_instance0_mode_get[2281]:ERROR:when the port_interface_mode of port 3 is 0, mode0:21 cannot be supported | |
[ 1667.275300] ------------[ cut here ]------------ | |
[ 1667.284512] nss_cc_port3_rx_clk_src: can't find a configuration for rate 125000000 | |
[ 1667.289379] WARNING: CPU: 1 PID: 512 at drivers/clk/qcom/clk-rcg2.c:311 __clk_rcg2_select_conf+0x180/0x190 | |
[ 1667.296741] Modules linked in: qca_nss_dp(O) qca_nss_ppe(O) qca_ssdk(O) | |
[ 1667.306375] CPU: 1 PID: 512 Comm: kworker/1:0 Tainted: G W O 6.8.1 #112 | |
[ 1667.312886] Hardware name: TP_Link BE550 (DT) | |
[ 1667.320869] Workqueue: events qca_mac_sw_sync_work_task [qca_ssdk] | |
[ 1667.325210] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 1667.331286] pc : __clk_rcg2_select_conf+0x180/0x190 | |
[ 1667.338142] lr : __clk_rcg2_select_conf+0x180/0x190 | |
[ 1667.343003] sp : ffffffc0834eb890 | |
[ 1667.347864] x29: ffffffc0834eb890 x28: 0000000007735940 x27: ffffffc0808231a4 | |
[ 1667.351339] x26: ffffffc08094be88 x25: 0000000000000000 x24: 0000000000000000 | |
[ 1667.358458] x23: ffffffc0834eb970 x22: ffffffc080823138 x21: 0000000007735940 | |
[ 1667.365576] x20: ffffffc0818663c8 x19: 0000000000000002 x18: ffffffffffffffff | |
[ 1667.372694] x17: 3532312065746172 x16: 20726f66206e6f69 x15: 746172756769666e | |
[ 1667.379811] x14: ffffffc0817d6c28 x13: 0000000000000169 x12: 0000000000000169 | |
[ 1667.386930] x11: 00000000ffffffea x10: ffffffc08182ec28 x9 : 0000000000000001 | |
[ 1667.394048] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001 | |
[ 1667.401166] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 | |
[ 1667.408285] x2 : ffffff803fd8a1d0 x1 : ffffffbfbe6ed000 x0 : 0000000000000046 | |
[ 1667.415402] Call trace: | |
[ 1667.422516] __clk_rcg2_select_conf+0x180/0x190 | |
[ 1667.424775] clk_rcg2_fm_determine_rate+0x54/0x12c | |
[ 1667.429288] clk_core_determine_round_nolock+0x58/0xe4 | |
[ 1667.434149] clk_hw_round_rate+0x3c/0xac | |
[ 1667.439270] clk_divider_bestdiv+0x104/0x580 | |
[ 1667.443350] divider_round_rate_parent+0x60/0x90 | |
[ 1667.447604] div_round_rate+0x48/0x5c | |
[ 1667.452204] clk_core_determine_round_nolock+0xa8/0xe4 | |
[ 1667.455765] clk_core_round_rate_nolock+0x34/0xa0 | |
[ 1667.460798] clk_core_round_rate_nolock+0x8c/0xa0 | |
[ 1667.465572] clk_core_set_rate_nolock+0x40/0x254 | |
[ 1667.470261] clk_set_rate+0x38/0x14c | |
[ 1667.474947] ssdk_uniphy_clock_rate_set+0x114/0x1cc [qca_ssdk] | |
[ 1667.478508] ssdk_port_speed_clock_set+0x124/0x1c8 [qca_ssdk] | |
[ 1667.484150] adpt_hppe_sgmii_speed_clock_set+0x48/0x6c [qca_ssdk] | |
[ 1667.489967] adpt_hppe_gcc_port_speed_clock_set+0xdc/0x1d0 [qca_ssdk] | |
[ 1667.496043] qca_hppe_mac_sw_sync_task+0x528/0x9cc [qca_ssdk] | |
[ 1667.502466] qca_mac_sw_sync_work_task+0x44/0x78 [qca_ssdk] | |
[ 1667.508195] process_one_work+0x158/0x2a8 | |
[ 1667.513575] worker_thread+0x2b4/0x494 | |
[ 1667.517743] kthread+0xdc/0xe0 | |
[ 1667.521388] ret_from_fork+0x10/0x20 | |
[ 1667.524427] ---[ end trace 0000000000000000 ]--- | |
[ 1667.529229] ------------[ cut here ]------------ | |
[ 1667.532760] nss_cc_port3_tx_clk_src: can't find a configuration for rate 125000000 | |
[ 1667.537388] WARNING: CPU: 1 PID: 512 at drivers/clk/qcom/clk-rcg2.c:311 __clk_rcg2_select_conf+0x180/0x190 | |
[ 1667.544745] Modules linked in: qca_nss_dp(O) qca_nss_ppe(O) qca_ssdk(O) | |
[ 1667.554377] CPU: 1 PID: 512 Comm: kworker/1:0 Tainted: G W O 6.8.1 #112 | |
[ 1667.560889] Hardware name: TP_Link BE550 (DT) | |
[ 1667.568872] Workqueue: events qca_mac_sw_sync_work_task [qca_ssdk] | |
[ 1667.573214] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 1667.579291] pc : __clk_rcg2_select_conf+0x180/0x190 | |
[ 1667.586145] lr : __clk_rcg2_select_conf+0x180/0x190 | |
[ 1667.591006] sp : ffffffc0834eb890 | |
[ 1667.595867] x29: ffffffc0834eb890 x28: 0000000007735940 x27: ffffffc0808230dc | |
[ 1667.599343] x26: ffffffc08094be70 x25: 0000000000000000 x24: 0000000000000000 | |
[ 1667.606462] x23: ffffffc0834eb970 x22: ffffffc080823070 x21: 0000000007735940 | |
[ 1667.613578] x20: ffffffc081866370 x19: 0000000000000002 x18: ffffffffffffffff | |
[ 1667.620697] x17: 3532312065746172 x16: 20726f66206e6f69 x15: 746172756769666e | |
[ 1667.627815] x14: ffffffc0817d6c28 x13: 0000000000000196 x12: 0000000000000196 | |
[ 1667.634933] x11: 00000000ffffffea x10: ffffffc08182ec28 x9 : 0000000000000001 | |
[ 1667.642051] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : c0000000ffffefff | |
[ 1667.649169] x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : ffffffc0834eb690 | |
[ 1667.656287] x2 : ffffffc0817d6b68 x1 : ffffffc0817d6b68 x0 : 0000000000000046 | |
[ 1667.663406] Call trace: | |
[ 1667.670519] __clk_rcg2_select_conf+0x180/0x190 | |
[ 1667.672778] clk_rcg2_fm_determine_rate+0x54/0x12c | |
[ 1667.677291] clk_core_determine_round_nolock+0x58/0xe4 | |
[ 1667.682153] clk_hw_round_rate+0x3c/0xac | |
[ 1667.687273] clk_divider_bestdiv+0x104/0x580 | |
[ 1667.691354] divider_round_rate_parent+0x60/0x90 | |
[ 1667.695608] div_round_rate+0x48/0x5c | |
[ 1667.700207] clk_core_determine_round_nolock+0xa8/0xe4 | |
[ 1667.703767] clk_core_round_rate_nolock+0x34/0xa0 | |
[ 1667.708802] clk_core_round_rate_nolock+0x8c/0xa0 | |
[ 1667.713577] clk_core_set_rate_nolock+0x40/0x254 | |
[ 1667.718264] clk_set_rate+0x38/0x14c | |
[ 1667.722950] ssdk_uniphy_clock_rate_set+0x114/0x1cc [qca_ssdk] | |
[ 1667.726512] ssdk_port_speed_clock_set+0x134/0x1c8 [qca_ssdk] | |
[ 1667.732154] adpt_hppe_sgmii_speed_clock_set+0x48/0x6c [qca_ssdk] | |
[ 1667.737970] adpt_hppe_gcc_port_speed_clock_set+0xdc/0x1d0 [qca_ssdk] | |
[ 1667.744048] qca_hppe_mac_sw_sync_task+0x528/0x9cc [qca_ssdk] | |
[ 1667.750471] qca_mac_sw_sync_work_task+0x44/0x78 [qca_ssdk] | |
[ 1667.756198] process_one_work+0x158/0x2a8 | |
[ 1667.761580] worker_thread+0x2b4/0x494 | |
[ 1667.765745] kthread+0xdc/0xe0 | |
[ 1667.769391] ret_from_fork+0x10/0x20 | |
[ 1667.772429] ---[ end trace 0000000000000000 ]--- |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment