-
-
Save mschiu77/e74ec084cc925643add845fa4dc31ab6 to your computer and use it in GitHub Desktop.
RAID bus controller PCI
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
0000:45:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID Tri-Mode SAS3516 [1000:0014] (rev 01) | |
Subsystem: LSI Logic / Symbios Logic MegaRAID Tri-Mode SAS3516 [1000:9460] | |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ | |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0, Cache Line Size: 32 bytes | |
Interrupt: pin A routed to IRQ 68 | |
NUMA node: 0 | |
Region 0: Memory at 93f00000 (64-bit, prefetchable) [size=1M] | |
Region 2: Memory at 93e00000 (64-bit, prefetchable) [size=1M] | |
Region 4: Memory at 93d00000 (32-bit, prefetchable) [size=1M] | |
Region 5: I/O ports at 7000 [size=256] | |
Expansion ROM at 96000000 [disabled] [size=1M] | |
Capabilities: [40] Power Management version 3 | |
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | |
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- | |
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ | |
Address: 0000000000000000 Data: 0000 | |
Masking: 00000000 Pending: 00000000 | |
Capabilities: [70] Express (v2) Endpoint, MSI 00 | |
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us | |
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W | |
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- | |
MaxPayload 256 bytes, MaxReadReq 512 bytes | |
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- | |
LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency L0s unlimited, L1 <64us | |
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ | |
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ | |
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | |
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported | |
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled | |
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- | |
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- | |
Compliance De-emphasis: -6dB | |
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+ | |
EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest- | |
Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- | |
Vector table: BAR=0 offset=00002000 | |
PBA: BAR=0 offset=00003000 | |
Capabilities: [100 v2] Advanced Error Reporting | |
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- | |
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- | |
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- | |
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ | |
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ | |
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- | |
Capabilities: [148 v1] Power Budgeting <?> | |
Capabilities: [158 v1] Alternative Routing-ID Interpretation (ARI) | |
ARICap: MFVC- ACS-, Next Function: 0 | |
ARICtl: MFVC- ACS-, Function Group: 0 | |
Capabilities: [168 v1] #19 | |
Capabilities: [254 v1] #16 | |
Capabilities: [284 v1] Vendor Specific Information: ID=0002 Rev=1 Len=100 <?> | |
Capabilities: [384 v1] Vendor Specific Information: ID=0001 Rev=1 Len=038 <?> | |
Capabilities: [3bc v1] #15 | |
Kernel driver in use: megaraid_sas | |
Kernel modules: megaraid_sas |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment