gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.19.0 (marvin@martian) (gcc-11 (Ubuntu 11.2.0-19ubuntu1) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP PREEMPT Thu Aug 4 13:50:40 EDT 2022
[    0.000000] Machine model: FriendlyElec NanoPi R5S
[    0.000000] efi: UEFI not found.
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] cma: Reserved 16 MiB at 0x000000007ea00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 29 pages/cpu s80568 r8192 d30024 u118784
[    0.000000] pcpu-alloc: s80568 r8192 d30024 u118784 alloc=29*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: patching kernel code
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 515592
[    0.000000] Kernel command line: earlyprintk console=tty1 console=ttyS2,115200n8 console=both rw root=PARTUUID=7a8752b3-3155-4eef-9c63-7b6b7f5fa402 rootwait rootfstype=ext4 fsck.repair=yes loglevel=1 net.ifnames=0 init=/sbin/init
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1997496K/2095104K available (16768K kernel code, 2998K rwdata, 5240K rodata, 6400K init, 861K bss, 81224K reserved, 16384K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 52952 entries in 207 pages
[    0.000000] ftrace: allocated 207 pages with 6 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 320 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: MBI range [296:319]
[    0.000000] GICv3: Using MBI frame 0x00000000fd410000
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000761] Console: colour dummy device 80x25
[    0.000814] printk: console [tty1] enabled
[    0.000874] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.000896] pid_max: default: 32768 minimum: 301
[    0.001037] LSM: Security Framework initializing
[    0.001199] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.001229] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.003975] cblist_init_generic: Setting adjustable number of callback queues.
[    0.004003] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.004187] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.004385] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.004800] rcu: Hierarchical SRCU implementation.
[    0.004811] rcu: 	Max phase no-delay instances is 1000.
[    0.006263] EFI services will not be available.
[    0.007271] smp: Bringing up secondary CPUs ...
[    0.008420] Detected VIPT I-cache on CPU1
[    0.008473] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[    0.008537] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.009769] Detected VIPT I-cache on CPU2
[    0.009817] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[    0.009865] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.011074] Detected VIPT I-cache on CPU3
[    0.011117] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[    0.011162] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.011328] smp: Brought up 1 node, 4 CPUs
[    0.011353] SMP: Total of 4 processors activated.
[    0.011363] CPU features: detected: 32-bit EL0 Support
[    0.011370] CPU features: detected: 32-bit EL1 Support
[    0.011379] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.011387] CPU features: detected: Common not Private translations
[    0.011393] CPU features: detected: CRC32 instructions
[    0.011402] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.011409] CPU features: detected: LSE atomic instructions
[    0.011416] CPU features: detected: Privileged Access Never
[    0.011422] CPU features: detected: RAS Extension Support
[    0.011431] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.047935] CPU: All CPU(s) started at EL2
[    0.050756] devtmpfs: initialized
[    0.064993] Registered cp15_barrier emulation handler
[    0.065022] Registered setend emulation handler
[    0.065042] KASLR disabled due to lack of seed
[    0.065316] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.065346] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.066112] pinctrl core: initialized pinctrl subsystem
[    0.066579] regulator-dummy: no parameters, enabled
[    0.067207] DMI not present or invalid.
[    0.068089] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.070095] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.070718] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.071316] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.071449] audit: initializing netlink subsys (disabled)
[    0.071765] audit: type=2000 audit(0.069:1): state=initialized audit_enabled=0 res=1
[    0.073924] thermal_sys: Registered thermal governor 'fair_share'
[    0.073938] thermal_sys: Registered thermal governor 'step_wise'
[    0.073946] thermal_sys: Registered thermal governor 'user_space'
[    0.073955] thermal_sys: Registered thermal governor 'power_allocator'
[    0.074719] cpuidle: using governor menu
[    0.075063] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.075276] ASID allocator initialised with 65536 entries
[    0.075294] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
[    0.075305] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB
[    0.075313] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[    0.075322] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB
[    0.092149] platform fe0a0000.hdmi: Fixing up cyclic dependency with fe040000.vop
[    0.115960] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
[    0.116958] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
[    0.117923] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
[    0.118843] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
[    0.119764] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
[    0.129402] platform hdmi-con: Fixing up cyclic dependency with fe0a0000.hdmi
[    0.154283] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.154309] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.154319] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.154330] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.156536] ACPI: Interpreter disabled.
[    0.157266] vdd_usbc: 5000 mV, enabled
[    0.157495] reg-fixed-voltage vdd-usbc: vdd_usbc supplying 5000000uV
[    0.157735] vcc3v3_sys: will resolve supply early: vin
[    0.157752] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
[    0.157775] vcc3v3_sys: supplied by vdd_usbc
[    0.157790] vdd_usbc: could not add device link regulator.2: -ENOENT
[    0.157872] vcc3v3_sys: 3300 mV, enabled
[    0.158074] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
[    0.158302] vcc5v0_sys: will resolve supply early: vin
[    0.158317] reg-fixed-voltage vcc5v0-sys: Looking up vin-supply from device tree
[    0.158338] vcc5v0_sys: supplied by vdd_usbc
[    0.158357] vdd_usbc: could not add device link regulator.3: -ENOENT
[    0.158445] vcc5v0_sys: 5000 mV, enabled
[    0.158665] reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
[    0.158896] pcie30_avdd0v9: will resolve supply early: vin
[    0.158912] reg-fixed-voltage pcie30-avdd0v9: Looking up vin-supply from device tree
[    0.158932] pcie30_avdd0v9: supplied by vcc3v3_sys
[    0.158947] vcc3v3_sys: could not add device link regulator.4: -ENOENT
[    0.159027] pcie30_avdd0v9: 900 mV, enabled
[    0.159231] reg-fixed-voltage pcie30-avdd0v9: pcie30_avdd0v9 supplying 900000uV
[    0.159491] pcie30_avdd1v8: will resolve supply early: vin
[    0.159507] reg-fixed-voltage pcie30-avdd1v8: Looking up vin-supply from device tree
[    0.159527] pcie30_avdd1v8: supplied by vcc3v3_sys
[    0.159542] vcc3v3_sys: could not add device link regulator.5: -ENOENT
[    0.159629] pcie30_avdd1v8: 1800 mV, enabled
[    0.159833] reg-fixed-voltage pcie30-avdd1v8: pcie30_avdd1v8 supplying 1800000uV
[    0.160110] vcc3v3_pcie: 3300 mV, disabled
[    0.160334] reg-fixed-voltage vcc3v3-pcie-regulator: Looking up vin-supply from device tree
[    0.160364] reg-fixed-voltage vcc3v3-pcie-regulator: Supply for vcc3v3_pcie (vin) resolved to itself
[    0.160377] vcc3v3_pcie: supplied by regulator-dummy
[    0.160466] reg-fixed-voltage vcc3v3-pcie-regulator: vcc3v3_pcie supplying 3300000uV
[    0.160724] vcc3v3_ngff: 3300 mV, disabled
[    0.160930] reg-fixed-voltage vcc3v3-ngff-regulator: Looking up vin-supply from device tree
[    0.160957] vcc3v3_ngff: supplied by vcc3v3_pcie
[    0.161042] reg-fixed-voltage vcc3v3-ngff-regulator: vcc3v3_ngff supplying 3300000uV
[    0.161280] vcc5v0_usb: will resolve supply early: vin
[    0.161295] reg-fixed-voltage vcc5v0_usb: Looking up vin-supply from device tree
[    0.161313] vcc5v0_usb: supplied by vdd_usbc
[    0.161328] vdd_usbc: could not add device link regulator.8: -ENOENT
[    0.161429] vcc5v0_usb: 5000 mV, enabled
[    0.161633] reg-fixed-voltage vcc5v0_usb: vcc5v0_usb supplying 5000000uV
[    0.162016] vcc5v0_usb_host: 5000 mV, disabled
[    0.162234] reg-fixed-voltage vcc5v0-usb-host: Looking up vin-supply from device tree
[    0.162264] vcc5v0_usb_host: supplied by vcc5v0_usb
[    0.162351] reg-fixed-voltage vcc5v0-usb-host: vcc5v0_usb_host supplying 5000000uV
[    0.162584] vcc5v0_sysp: will resolve supply early: vin
[    0.162599] reg-fixed-voltage vcc5v0-sysp: Looking up vin-supply from device tree
[    0.162619] vcc5v0_sysp: supplied by vcc3v3_sys
[    0.162634] vcc3v3_sys: could not add device link regulator.10: -ENOENT
[    0.162714] vcc5v0_sysp: 5000 mV, enabled
[    0.162969] reg-fixed-voltage vcc5v0-sysp: vcc5v0_sysp supplying 5000000uV
[    0.163305] vcc5v0_usb_otg: 5000 mV, disabled
[    0.163522] reg-fixed-voltage vcc5v0-usb-otg: Looking up vin-supply from device tree
[    0.163551] vcc5v0_usb_otg: supplied by vcc5v0_usb
[    0.163640] reg-fixed-voltage vcc5v0-usb-otg: vcc5v0_usb_otg supplying 5000000uV
[    0.164378] iommu: Default domain type: Translated 
[    0.164390] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.164928] SCSI subsystem initialized
[    0.164988] libata version 3.00 loaded.
[    0.165276] usbcore: registered new interface driver usbfs
[    0.165348] usbcore: registered new interface driver hub
[    0.165413] usbcore: registered new device driver usb
[    0.165896] mc: Linux media interface: v0.10
[    0.165976] videodev: Linux video capture interface: v2.00
[    0.166155] pps_core: LinuxPPS API ver. 1 registered
[    0.166166] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.166194] PTP clock support registered
[    0.167012] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16
[    0.167290] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    0.167374] arm-scmi firmware:scmi: Malformed reply - real_sz:8  calc_sz:4  (loop_num_ret:1)
[    0.167392] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    0.168580] Advanced Linux Sound Architecture Driver Initialized.
[    0.169619] Bluetooth: Core ver 2.22
[    0.169677] NET: Registered PF_BLUETOOTH protocol family
[    0.169687] Bluetooth: HCI device and connection manager initialized
[    0.169708] Bluetooth: HCI socket layer initialized
[    0.169723] Bluetooth: L2CAP socket layer initialized
[    0.169762] Bluetooth: SCO socket layer initialized
[    0.169794] NetLabel: Initializing
[    0.169801] NetLabel:  domain hash size = 128
[    0.169810] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.169901] NetLabel:  unlabeled traffic allowed by default
[    0.170965] clocksource: Switched to clocksource arch_sys_counter
[    0.171513] VFS: Disk quotas dquot_6.6.0
[    0.171594] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.171779] FS-Cache: Loaded
[    0.172095] pnp: PnP ACPI: disabled
[    0.188452] NET: Registered PF_INET protocol family
[    0.188754] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.191297] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.191433] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.191461] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.191610] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.192078] TCP: Hash tables configured (established 16384 bind 16384)
[    0.192287] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.192412] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.192867] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.193741] RPC: Registered named UNIX socket transport module.
[    0.193754] RPC: Registered udp transport module.
[    0.193762] RPC: Registered tcp transport module.
[    0.193769] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.193785] PCI: CLS 0 bytes, default 64
[    0.194160] Trying to unpack rootfs image as initramfs...
[    0.202379] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
[    0.203599] kvm [1]: IPA Size Limit: 40 bits
[    0.203639] kvm [1]: GICv3: no GICV resource entry
[    0.203650] kvm [1]: disabling GICv2 emulation
[    0.203679] kvm [1]: GIC system register CPU interface enabled
[    0.203919] kvm [1]: vgic interrupt IRQ9
[    0.204171] kvm [1]: VHE mode initialized successfully
[    0.562115] Freeing initrd memory: 7972K
[    1.287038] Initialise system trusted keyrings
[    1.287527] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    1.296211] zbud: loaded
[    1.298387] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.299694] NFS: Registering the id_resolver key type
[    1.299746] Key type id_resolver registered
[    1.299756] Key type id_legacy registered
[    1.299881] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.299905] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.300240] fuse: init (API version 7.36)
[    1.355189] Key type asymmetric registered
[    1.355204] Asymmetric key parser 'x509' registered
[    1.355283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.355649] io scheduler mq-deadline registered
[    1.355662] io scheduler kyber registered
[    1.355822] io scheduler bfq registered
[    1.361052] phy phy-fe8a0000.usb2phy.0: Looking up phy-supply from device tree
[    1.361113] vcc5v0_usb_host: could not add device link phy-fe8a0000.usb2phy.0: -ENOENT
[    1.361423] phy phy-fe8a0000.usb2phy.1: Looking up phy-supply from device tree
[    1.361568] vcc5v0_usb_otg: could not add device link phy-fe8a0000.usb2phy.1: -ENOENT
[    1.363802] phy phy-fe8b0000.usb2phy.2: Looking up phy-supply from device tree
[    1.363830] phy phy-fe8b0000.usb2phy.2: Looking up phy-supply property in node /usb2phy@fe8b0000/host-port failed
[    1.364008] phy phy-fe8b0000.usb2phy.3: Looking up phy-supply from device tree
[    1.364026] phy phy-fe8b0000.usb2phy.3: Looking up phy-supply property in node /usb2phy@fe8b0000/otg-port failed
[    1.366013] phy phy-fe830000.phy.4: Looking up phy-supply from device tree
[    1.366040] phy phy-fe830000.phy.4: Looking up phy-supply property in node /phy@fe830000 failed
[    1.366708] phy phy-fe840000.phy.5: Looking up phy-supply from device tree
[    1.366729] phy phy-fe840000.phy.5: Looking up phy-supply property in node /phy@fe840000 failed
[    1.367496] phy phy-fe820000.phy.6: Looking up phy-supply from device tree
[    1.367516] phy phy-fe820000.phy.6: Looking up phy-supply property in node /phy@fe820000 failed
[    1.368895] rockchip-snps-pcie3-phy fe8c0000.phy: failed to find rockchip,pipe_grf regmap
[    1.368931] phy phy-fe8c0000.phy.7: Looking up phy-supply from device tree
[    1.368947] phy phy-fe8c0000.phy.7: Looking up phy-supply property in node /phy@fe8c0000 failed
[    1.378442] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.378470] dma-pl330 fe530000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.382126] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.382147] dma-pl330 fe550000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    1.383516] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
[    1.383914] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    1.388563] printk: console [ttyS2] disabled
[    1.388665] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 29, base_baud = 1500000) is a 16550A
[    1.389231] printk: console [ttyS2] enabled
[    1.394127] rockchip-vop2 fe040000.vop: Adding to iommu group 0
[    1.405946] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.413300] brd: module loaded
[    1.423747] loop: module loaded
[    1.424212] lkdtm: No crash points registered, enable through debugfs
[    1.431245] rk_gmac-dwmac fe2a0000.ethernet: IRQ eth_lpi not found
[    1.431806] rk_gmac-dwmac fe2a0000.ethernet: Looking up phy-supply from device tree
[    1.431847] rk_gmac-dwmac fe2a0000.ethernet: Looking up phy-supply property in node /ethernet@fe2a0000 failed
[    1.431903] rk_gmac-dwmac fe2a0000.ethernet: no regulator found
[    1.431917] rk_gmac-dwmac fe2a0000.ethernet: clock input or output? (output).
[    1.431931] rk_gmac-dwmac fe2a0000.ethernet: TX delay(0x3c).
[    1.431945] rk_gmac-dwmac fe2a0000.ethernet: RX delay(0x2f).
[    1.431965] rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no).
[    1.437070] rk_gmac-dwmac fe2a0000.ethernet: init for RGMII
[    1.437475] rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    1.437500] rk_gmac-dwmac fe2a0000.ethernet: 	DWMAC4/5
[    1.437515] rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register supported
[    1.437526] rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine supported
[    1.437536] rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported
[    1.437545] rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported
[    1.437680] rk_gmac-dwmac fe2a0000.ethernet: TSO supported
[    1.437694] rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.437725] rk_gmac-dwmac fe2a0000.ethernet: device MAC address d6:e3:67:3f:a4:ac
[    1.437745] rk_gmac-dwmac fe2a0000.ethernet: Enabled RFS Flow TC (entries=10)
[    1.437760] rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled
[    1.437772] rk_gmac-dwmac fe2a0000.ethernet: Using 32 bits DMA width
[    1.589962] PPP generic driver version 2.4.2
[    1.590355] usbcore: registered new interface driver asix
[    1.590441] usbcore: registered new interface driver ax88179_178a
[    1.590502] usbcore: registered new interface driver cdc_ether
[    1.590561] usbcore: registered new interface driver rndis_host
[    1.590644] usbcore: registered new interface driver qmi_wwan
[    1.599703] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.599750] ehci-pci: EHCI PCI platform driver
[    1.599826] ehci-platform: EHCI generic platform driver
[    1.600305] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.600340] ohci-platform: OHCI generic platform driver
[    1.601891] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.601940] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    1.602138] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    1.602232] xhci-hcd xhci-hcd.0.auto: irq 34, io mem 0xfcc00000
[    1.602561] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.602582] ehci-platform fd800000.usb: EHCI Host Controller
[    1.602589] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    1.602599] ohci-platform fd840000.usb: Generic Platform OHCI controller
[    1.602621] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    1.602635] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 3
[    1.602638] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 4
[    1.602703] ehci-platform fd880000.usb: EHCI Host Controller
[    1.602804] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
[    1.602809] ehci-platform fd800000.usb: irq 36, io mem 0xfd800000
[    1.602847] ohci-platform fd840000.usb: irq 38, io mem 0xfd840000
[    1.602957] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[    1.602978] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.602992] usb usb1: Product: xHCI Host Controller
[    1.603003] usb usb1: Manufacturer: Linux 5.19.0 xhci-hcd
[    1.603014] usb usb1: SerialNumber: xhci-hcd.0.auto
[    1.603896] hub 1-0:1.0: USB hub found
[    1.603971] hub 1-0:1.0: 1 port detected
[    1.604709] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.604959] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
[    1.604979] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.604993] usb usb2: Product: xHCI Host Controller
[    1.605003] usb usb2: Manufacturer: Linux 5.19.0 xhci-hcd
[    1.605014] usb usb2: SerialNumber: xhci-hcd.0.auto
[    1.605788] hub 2-0:1.0: USB hub found
[    1.605854] hub 2-0:1.0: 1 port detected
[    1.606448] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 5
[    1.606467] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 6
[    1.606644] ehci-platform fd880000.usb: irq 37, io mem 0xfd880000
[    1.606684] ohci-platform fd8c0000.usb: irq 39, io mem 0xfd8c0000
[    1.606719] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.606762] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[    1.606955] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    1.607035] xhci-hcd xhci-hcd.1.auto: irq 35, io mem 0xfd000000
[    1.607373] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.607404] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[    1.607430] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    1.607796] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[    1.607816] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.607830] usb usb7: Product: xHCI Host Controller
[    1.607841] usb usb7: Manufacturer: Linux 5.19.0 xhci-hcd
[    1.607853] usb usb7: SerialNumber: xhci-hcd.1.auto
[    1.608634] hub 7-0:1.0: USB hub found
[    1.608700] hub 7-0:1.0: 1 port detected
[    1.609372] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.609625] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
[    1.609646] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.609660] usb usb8: Product: xHCI Host Controller
[    1.609670] usb usb8: Manufacturer: Linux 5.19.0 xhci-hcd
[    1.609682] usb usb8: SerialNumber: xhci-hcd.1.auto
[    1.610411] hub 8-0:1.0: USB hub found
[    1.610474] hub 8-0:1.0: 1 port detected
[    1.611245] usbcore: registered new interface driver cdc_acm
[    1.611258] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.611341] usbcore: registered new interface driver cdc_wdm
[    1.611735] usbcore: registered new interface driver uas
[    1.611869] usbcore: registered new interface driver usb-storage
[    1.612008] usbcore: registered new interface driver usbserial_generic
[    1.612051] usbserial: USB Serial support registered for generic
[    1.612136] usbcore: registered new interface driver ch341
[    1.612179] usbserial: USB Serial support registered for ch341-uart
[    1.612261] usbcore: registered new interface driver cp210x
[    1.612300] usbserial: USB Serial support registered for cp210x
[    1.612395] usbcore: registered new interface driver ftdi_sio
[    1.612434] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.612598] usbcore: registered new interface driver option
[    1.612637] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.612845] usbcore: registered new interface driver pl2303
[    1.612891] usbserial: USB Serial support registered for pl2303
[    1.612976] usbcore: registered new interface driver qcserial
[    1.613016] usbserial: USB Serial support registered for Qualcomm USB modem
[    1.613713] mousedev: PS/2 mouse device common for all mice
[    1.614374] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[    1.614994] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[    1.615015] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.615028] usb usb3: Product: EHCI Host Controller
[    1.615039] usb usb3: Manufacturer: Linux 5.19.0 ehci_hcd
[    1.615049] usb usb3: SerialNumber: fd800000.usb
[    1.615267] i2c_dev: i2c /dev entries driver
[    1.615902] hub 3-0:1.0: USB hub found
[    1.616001] hub 3-0:1.0: 1 port detected
[    1.617849] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
[    1.619344] vdd_cpu: will resolve supply early: vin
[    1.619363] fan53555-regulator 0-001c: Looking up vin-supply from device tree
[    1.619499] vdd_cpu: supplied by vcc5v0_sys
[    1.619518] vcc5v0_sys: could not add device link regulator.12: -ENOENT
[    1.622507] vdd_cpu: 800 <--> 1150 mV at 900 mV, enabled
[    1.626666] rk808 0-0020: chip id: 0x8090
[    1.627708] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
[    1.628316] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[    1.628338] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.628352] usb usb5: Product: EHCI Host Controller
[    1.628363] usb usb5: Manufacturer: Linux 5.19.0 ehci_hcd
[    1.628374] usb usb5: SerialNumber: fd880000.usb
[    1.629217] hub 5-0:1.0: USB hub found
[    1.629305] hub 5-0:1.0: 1 port detected
[    1.661982] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[    1.662007] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.662023] usb usb4: Product: Generic Platform OHCI controller
[    1.662034] usb usb4: Manufacturer: Linux 5.19.0 ohci_hcd
[    1.662047] usb usb4: SerialNumber: fd840000.usb
[    1.662926] hub 4-0:1.0: USB hub found
[    1.662993] hub 4-0:1.0: 1 port detected
[    1.665286] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[    1.665308] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.665323] usb usb6: Product: Generic Platform OHCI controller
[    1.665335] usb usb6: Manufacturer: Linux 5.19.0 ohci_hcd
[    1.665346] usb usb6: SerialNumber: fd8c0000.usb
[    1.666102] hub 6-0:1.0: USB hub found
[    1.666166] hub 6-0:1.0: 1 port detected
[    1.672285] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.672330] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.674760] vdd_logic: will resolve supply early: vcc1
[    1.674782] rk808 0-0020: Looking up vcc1-supply from device tree
[    1.674923] vdd_logic: supplied by vcc3v3_sys
[    1.674943] vcc3v3_sys: could not add device link regulator.13: -ENOENT
[    1.678805] vdd_logic: 500 <--> 1350 mV at 900 mV, enabled
[    1.681993] vdd_gpu: will resolve supply early: vcc2
[    1.682013] rk808 0-0020: Looking up vcc2-supply from device tree
[    1.682035] vdd_gpu: supplied by vcc3v3_sys
[    1.682052] vcc3v3_sys: could not add device link regulator.14: -ENOENT
[    1.685861] vdd_gpu: 500 <--> 1350 mV at 900 mV, enabled
[    1.687676] vcc_ddr: will resolve supply early: vcc3
[    1.687695] rk808 0-0020: Looking up vcc3-supply from device tree
[    1.687719] vcc_ddr: supplied by vcc3v3_sys
[    1.687736] vcc3v3_sys: could not add device link regulator.15: -ENOENT
[    1.690569] vcc_ddr: at 500 mV, enabled
[    1.694336] vdd_npu: 500 <--> 1350 mV at 900 mV, disabled
[    1.695089] rk808 0-0020: Looking up vcc4-supply from device tree
[    1.695117] vdd_npu: supplied by vcc3v3_sys
[    1.696665] vcc_1v8: will resolve supply early: vcc9
[    1.696686] rk808 0-0020: Looking up vcc9-supply from device tree
[    1.696707] vcc_1v8: supplied by vcc3v3_sys
[    1.696722] vcc3v3_sys: could not add device link regulator.17: -ENOENT
[    1.699122] vcc_1v8: 1800 mV, enabled
[    1.700981] vdda0v9_image: will resolve supply early: vcc5
[    1.700999] rk808 0-0020: Looking up vcc5-supply from device tree
[    1.701022] vdda0v9_image: supplied by vcc3v3_sys
[    1.701038] vcc3v3_sys: could not add device link regulator.18: -ENOENT
[    1.703957] vdda0v9_image: 900 mV, enabled
[    1.706148] vdda_0v9: will resolve supply early: vcc5
[    1.706167] rk808 0-0020: Looking up vcc5-supply from device tree
[    1.706189] vdda_0v9: supplied by vcc3v3_sys
[    1.706205] vcc3v3_sys: could not add device link regulator.19: -ENOENT
[    1.709151] vdda_0v9: 900 mV, enabled
[    1.711457] vdda0v9_pmu: will resolve supply early: vcc5
[    1.711477] rk808 0-0020: Looking up vcc5-supply from device tree
[    1.711498] vdda0v9_pmu: supplied by vcc3v3_sys
[    1.711515] vcc3v3_sys: could not add device link regulator.20: -ENOENT
[    1.714925] vdda0v9_pmu: 900 mV, enabled
[    1.716762] vccio_acodec: will resolve supply early: vcc6
[    1.716781] rk808 0-0020: Looking up vcc6-supply from device tree
[    1.716803] vccio_acodec: supplied by vcc3v3_sys
[    1.716820] vcc3v3_sys: could not add device link regulator.21: -ENOENT
[    1.719765] vccio_acodec: 3300 mV, enabled
[    1.722949] vccio_sd: 1800 <--> 3300 mV at 3300 mV, enabled
[    1.723694] rk808 0-0020: Looking up vcc6-supply from device tree
[    1.723719] vccio_sd: supplied by vcc3v3_sys
[    1.725393] vcc3v3_pmu: will resolve supply early: vcc6
[    1.725413] rk808 0-0020: Looking up vcc6-supply from device tree
[    1.725434] vcc3v3_pmu: supplied by vcc3v3_sys
[    1.725452] vcc3v3_sys: could not add device link regulator.23: -ENOENT
[    1.728858] vcc3v3_pmu: 3300 mV, enabled
[    1.731088] vcca_1v8: will resolve supply early: vcc7
[    1.731107] rk808 0-0020: Looking up vcc7-supply from device tree
[    1.731131] vcca_1v8: supplied by vcc3v3_sys
[    1.731147] vcc3v3_sys: could not add device link regulator.24: -ENOENT
[    1.734069] vcca_1v8: 1800 mV, enabled
[    1.736404] vcca1v8_pmu: will resolve supply early: vcc7
[    1.736423] rk808 0-0020: Looking up vcc7-supply from device tree
[    1.736445] vcca1v8_pmu: supplied by vcc3v3_sys
[    1.736461] vcc3v3_sys: could not add device link regulator.25: -ENOENT
[    1.739872] vcca1v8_pmu: 1800 mV, enabled
[    1.741725] vcca1v8_image: will resolve supply early: vcc7
[    1.741744] rk808 0-0020: Looking up vcc7-supply from device tree
[    1.741765] vcca1v8_image: supplied by vcc3v3_sys
[    1.741781] vcc3v3_sys: could not add device link regulator.26: -ENOENT
[    1.744728] vcca1v8_image: 1800 mV, enabled
[    1.746459] vcc_3v3: will resolve supply early: vcc9
[    1.746478] rk808 0-0020: Looking up vcc9-supply from device tree
[    1.746500] vcc_3v3: supplied by vcc3v3_sys
[    1.746517] vcc3v3_sys: could not add device link regulator.27: -ENOENT
[    1.748431] vcc_3v3: at 3300 mV, enabled
[    1.749651] vcc3v3_sd: will resolve supply early: vcc8
[    1.749670] rk808 0-0020: Looking up vcc8-supply from device tree
[    1.749691] vcc3v3_sd: supplied by vcc3v3_sys
[    1.749708] vcc3v3_sys: could not add device link regulator.28: -ENOENT
[    1.751644] vcc3v3_sd: at 3300 mV, enabled
[    1.758367] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
[    1.771004] rk808-rtc rk808-rtc: registered as rtc0
[    1.773766] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:05:19 UTC (1501923919)
[    1.777700] IR NEC protocol handler initialized
[    1.779351] __power_supply_register: Expected proper parent device for 'test_ac'
[    1.779740] __power_supply_register: Expected proper parent device for 'test_battery'
[    1.780437] __power_supply_register: Expected proper parent device for 'test_usb'
[    1.785604] device-mapper: uevent: version 1.0.3
[    1.786063] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com
[    1.786546] cpu cpu0: Looking up cpu-supply from device tree
[    1.793910] sdhci: Secure Digital Host Controller Interface driver
[    1.793922] sdhci: Copyright(c) Pierre Ossman
[    1.793925] Synopsys Designware Multimedia Card Interface Driver
[    1.794417] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.795077] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
[    1.795110] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
[    1.795119] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
[    1.795172] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 69,32 bit host data width,256 deep fifo
[    1.795228] dwmmc_rockchip fe2b0000.mmc: Looking up vmmc-supply from device tree
[    1.795323] sdhci-dwcmshc fe310000.mmc: Looking up vmmc-supply from device tree
[    1.795332] sdhci-dwcmshc fe310000.mmc: Looking up vmmc-supply property in node /mmc@fe310000 failed
[    1.795377] sdhci-dwcmshc fe310000.mmc: Looking up vqmmc-supply from device tree
[    1.795383] sdhci-dwcmshc fe310000.mmc: Looking up vqmmc-supply property in node /mmc@fe310000 failed
[    1.795886] dwmmc_rockchip fe2b0000.mmc: Looking up vqmmc-supply from device tree
[    1.796251] ledtrig-cpu: registered to indicate activity on CPUs
[    1.796276] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    1.796422] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    1.796751] hid: raw HID events driver (C) Jiri Kosina
[    1.797100] usbcore: registered new interface driver usbhid
[    1.797106] usbhid: USB HID core driver
[    1.797954] rockchip-saradc fe720000.saradc: Looking up vref-supply from device tree
[    1.800141] optee: probing for conduit method.
[    1.800151] optee: api uid mismatch
[    1.800154] optee: probe of firmware:optee failed with error -22
[    1.804186] Initializing XFRM netlink socket
[    1.804208] IPsec XFRM device driver
[    1.804588] NET: Registered PF_INET6 protocol family
[    1.805484] Segment Routing with IPv6
[    1.805516] In-situ OAM (IOAM) with IPv6
[    1.807118] bpfilter: Loaded bpfilter_umh pid 85
[    1.807712] NET: Registered PF_PACKET protocol family
[    1.807880] Bluetooth: RFCOMM TTY layer initialized
[    1.807892] Bluetooth: RFCOMM socket layer initialized
[    1.807912] Bluetooth: RFCOMM ver 1.11
[    1.807922] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.807931] Bluetooth: HIDP socket layer initialized
[    1.807994] Key type dns_resolver registered
[    1.808685] registered taskstats version 1
[    1.808706] Loading compiled-in X.509 certificates
[    1.809740] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[    1.821325] Loaded X.509 cert 'Build time autogenerated kernel key: b34b9ba39a2923b192d1756a1547360bbdff69ab'
[    1.821636] zswap: loaded using pool lzo/zbud
[    1.826854] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
[    1.858804] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply from device tree
[    1.859894] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio2-supply from device tree
[    1.860864] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio1-supply from device tree
[    1.861887] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply from device tree
[    1.861896] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply property in node /syscon@fdc20000/io-domains failed
[    1.861939] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio3-supply from device tree
[    1.862502] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio4-supply from device tree
[    1.863525] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio5-supply from device tree
[    1.864121] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio6-supply from device tree
[    1.865089] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio7-supply from device tree
[    1.866545] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffffc00916dd58)
[    1.866598] dwhdmi-rockchip fe0a0000.hdmi: Looking up avdd-0v9-supply from device tree
[    1.867181] dwhdmi-rockchip fe0a0000.hdmi: Looking up avdd-1v8-supply from device tree
[    1.867847] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.868397] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.869262] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffffffc0091725d0)
[    1.869673] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[    1.869757] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    1.869832] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    1.875354] ALSA device list:
[    1.875368]   #0: HDMI
[    1.876518] vccio_sd: ramp_delay not set
[    1.881037] mmc1: new HS200 MMC card at address 0001
[    1.881448] Freeing unused kernel memory: 6400K
[    1.882115] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
[    1.884076] mmcblk1boot0: mmc1:0001 8GTF4R 4.00 MiB 
[    1.885569] mmcblk1boot1: mmc1:0001 8GTF4R 4.00 MiB 
[    1.886803] mmcblk1rpmb: mmc1:0001 8GTF4R 512 KiB, chardev (239:0)
[    1.900507] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[    1.907724] Run /init as init process
[    1.907730]   with arguments:
[    1.907734]     /init
[    1.907738]   with environment:
[    1.907748]     HOME=/
[    1.907751]     TERM=linux
[    1.914628] dwmmc_rockchip fe2b0000.mmc: Successfully tuned phase to 270
[    1.914663] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[    1.915480] mmcblk0: mmc0:aaaa SC32G 29.7 GiB 
[    1.922906]  mmcblk0: p1
[    2.347811] rtc-hym8563 5-0051: no valid clock/calendar values available
[    2.348513] rtc-hym8563 5-0051: registered as rtc1
[    2.584313] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none.
[    2.889565] systemd[1]: System time before build time, advancing clock.
[    2.960359] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    2.960918] systemd[1]: Detected architecture arm64.
[    2.965317] systemd[1]: Set hostname to <nanopir5s>.
[    3.028174] dw-apb-uart fe660000.serial: forbid DMA for kernel console
[    3.295186] systemd[1]: /etc/systemd/system/rc-local.service:11: Support for option SysVStartPriority= has been removed and it is ignored
[    3.322437] systemd[1]: Queued start job for default target Graphical Interface.
[   12.050959] random: crng init done
[   12.053503] systemd[1]: Created slice system-getty.slice.
[   12.055081] systemd[1]: Created slice system-modprobe.slice.
[   12.056317] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   12.057378] systemd[1]: Created slice User and Session Slice.
[   12.057905] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   12.058306] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   12.059084] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   12.059337] systemd[1]: Reached target Local Encrypted Volumes.
[   12.059606] systemd[1]: Reached target Paths.
[   12.059772] systemd[1]: Reached target Remote File Systems.
[   12.059922] systemd[1]: Reached target Slices.
[   12.060081] systemd[1]: Reached target Swap.
[   12.060736] systemd[1]: Listening on Syslog Socket.
[   12.061367] systemd[1]: Listening on fsck to fsckd communication Socket.
[   12.061742] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   12.062448] systemd[1]: Listening on Journal Audit Socket.
[   12.063020] systemd[1]: Listening on Journal Socket (/dev/log).
[   12.063658] systemd[1]: Listening on Journal Socket.
[   12.068055] systemd[1]: Listening on udev Control Socket.
[   12.068746] systemd[1]: Listening on udev Kernel Socket.
[   12.071963] systemd[1]: Mounting Huge Pages File System...
[   12.075655] systemd[1]: Mounting POSIX Message Queue File System...
[   12.079799] systemd[1]: Mounting Kernel Debug File System...
[   12.083773] systemd[1]: Mounting Kernel Trace File System...
[   12.089216] systemd[1]: Starting Restore / save the current clock...
[   12.094015] systemd[1]: Starting Set the console keyboard layout...
[   12.098328] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   12.103986] systemd[1]: Starting Load Kernel Module configfs...
[   12.108648] systemd[1]: Starting Load Kernel Module drm...
[   12.113013] systemd[1]: Starting Load Kernel Module fuse...
[   12.117182] systemd[1]: Started Nameserver information manager.
[   12.118265] systemd[1]: Reached target Network (Pre).
[   12.125136] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   12.125326] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   12.132105] systemd[1]: Starting Journal Service...
[   12.139990] systemd[1]: Starting Load Kernel Modules...
[   12.145215] systemd[1]: Starting Remount Root and Kernel File Systems...
[   12.151316] systemd[1]: Starting Coldplug All udev Devices...
[   12.159941] systemd[1]: Mounted Huge Pages File System.
[   12.160919] systemd[1]: Mounted POSIX Message Queue File System.
[   12.161897] systemd[1]: Mounted Kernel Debug File System.
[   12.162862] systemd[1]: Mounted Kernel Trace File System.
[   12.165148] systemd[1]: Finished Restore / save the current clock.
[   12.167405] systemd[1]: Finished Create list of static device nodes for the current kernel.
[   12.169495] systemd[1]: modprobe@configfs.service: Succeeded.
[   12.171031] systemd[1]: Finished Load Kernel Module configfs.
[   12.173055] systemd[1]: modprobe@drm.service: Succeeded.
[   12.174513] systemd[1]: Finished Load Kernel Module drm.
[   12.176498] systemd[1]: modprobe@fuse.service: Succeeded.
[   12.177748] systemd[1]: Finished Load Kernel Module fuse.
[   12.178433] EXT4-fs (mmcblk0p1): re-mounted. Quota mode: none.
[   12.185155] systemd[1]: Finished Load Kernel Modules.
[   12.187111] systemd[1]: Finished Remount Root and Kernel File Systems.
[   12.191555] systemd[1]: Mounting FUSE Control File System...
[   12.201356] systemd[1]: Mounting Kernel Configuration File System...
[   12.210392] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   12.210650] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[   12.214161] systemd[1]: Starting Load/Save Random Seed...
[   12.218404] systemd[1]: Starting Apply Kernel Variables...
[   12.222753] systemd[1]: Starting Create System Users...
[   12.227242] systemd[1]: Mounted FUSE Control File System.
[   12.228140] systemd[1]: Mounted Kernel Configuration File System.
[   12.289134] systemd[1]: Finished Load/Save Random Seed.
[   12.291365] systemd[1]: Finished Apply Kernel Variables.
[   12.293302] systemd[1]: Finished Create System Users.
[   12.294057] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[   12.297800] systemd[1]: Starting Create Static Device Nodes in /dev...
[   12.344083] systemd[1]: Finished Create Static Device Nodes in /dev.
[   12.350104] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[   12.388946] systemd[1]: Finished Set the console keyboard layout.
[   12.389682] systemd[1]: Reached target Local File Systems (Pre).
[   12.393749] systemd[1]: Mounting /tmp...
[   12.405601] systemd[1]: Mounted /tmp.
[   12.406223] systemd[1]: Reached target Local File Systems.
[   12.409859] systemd[1]: Starting Set console font and keymap...
[   12.410442] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[   12.410646] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[   12.411856] systemd[1]: Started Journal Service.
[   12.447218] systemd-journald[278]: Received client request to flush runtime journal.
[   13.133952] zram: Added device: zram0
[   13.230490] zram0: detected capacity change from 0 to 2097152
[   13.298137] Adding 1048572k swap on /dev/zram0.  Priority:100 extents:1 across:1048572k SSFS
[   13.371835] panfrost fde60000.gpu: clock rate = 594000000
[   13.371874] panfrost fde60000.gpu: bus_clock rate = 500000000
[   13.371940] panfrost fde60000.gpu: Looking up mali-supply from device tree
[   13.396799] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0
[   13.396821] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400
[   13.396828] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7
[   13.396835] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
[   13.428235] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1
[   13.977750] rk_gmac-dwmac fe2a0000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=33)
[   13.986252] rk_gmac-dwmac fe2a0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   13.994380] dwmac4: Master AXI performs any burst length
[   13.994417] rk_gmac-dwmac fe2a0000.ethernet eth0: No Safety Features support found
[   13.994449] rk_gmac-dwmac fe2a0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   13.994776] rk_gmac-dwmac fe2a0000.ethernet eth0: registered PTP clock
[   13.995500] rk_gmac-dwmac fe2a0000.ethernet eth0: configuring for phy/rgmii link mode
[   16.590696] rk_gmac-dwmac fe2a0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   16.590743] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready