Teensy 4.1 Testing

gistfile1.txt

#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include "USBHost_t36.h"
#include "LoRa_E32.h"


#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 32 // OLED display height, in pixels
#define HWSERIAL Serial1


// LoRa_E32 e32ttl100(&HWSERIAL, 13, 11, 12);
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, 4);

void setup()
{
  Wire.begin();
  HWSERIAL.begin(9600);

  while (!Serial); // Wait for USB Serial

  if (!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) { // Address 0x3C for 128x64
    Serial.println(F("SSD1306 allocation failed"));
    for (;;);
  }

  //  e32ttl100.begin();

  //  Serial.println("Fetching Uplink Settings");
  //  ResponseStructContainer c;
  //  c = e32ttl100.getConfiguration();
  //  Configuration configuration = *(Configuration*) c.data;
  //  Serial.println(c.status.getResponseDescription());
  //  Serial.println(c.status.code);
  //  Serial.println(configuration.SPED.getUARTBaudRate());

  delay(1000); // wait a sec
  display.clearDisplay();

  Serial.println("Booting finished");
}


void loop()
{
  if (Serial.available() > 0) {
    // read the incoming byte:
    String input = Serial.readString();

    Serial.println("Received:");
    Serial.println(input);

    HWSERIAL.println(input);

    display.clearDisplay();
    display.setTextSize(1); // legt die Schriftgöße fest
    display.setTextColor(WHITE);
    display.setCursor(0, 2);
    display.println(input); //Textzeile ausgeben
    display.display();
  }

  if (HWSERIAL.available() > 0) {
    // read the incoming byte:
    char input = HWSERIAL.read();
    HWSERIAL.print(input);

    Serial.println("Received via Uplink:");
    Serial.println(input);

    display.clearDisplay();
    display.setTextSize(1); // legt die Schriftgöße fest
    display.setTextColor(WHITE);
    display.setCursor(0, 2);
    display.println(input); //Textzeile ausgeben
    display.display();
  }
}