Created
December 29, 2017 04:23
-
-
Save murac/0cccf40e4bc7a9adf11a18214ecb1246 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
########## SMART status report for da0 drive (Western Digital Red: WD-WCC4E4LL9PKN) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 182 178 021 Pre-fail Always - 7875 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 85 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 10999 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 85 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 83 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 178 | |
194 Temperature_Celsius 0x0022 117 104 000 Old_age Always - 35 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68WT0N0 | |
Serial Number: WD-WCC4E4LL9PKN | |
LU WWN Device Id: 5 0014ee 20d522024 | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:19 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (51120) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 512) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x703d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 182 178 021 - 7875 | |
4 Start_Stop_Count -O--CK 100 100 000 - 85 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 085 085 000 - 10999 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 85 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 83 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 178 | |
194 Temperature_Celsius -O---K 117 104 000 - 35 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log | |
0xb7 GPL,SL VS 39 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 10994 - | |
# 2 Short offline Completed without error 00% 10930 - | |
# 3 Extended offline Completed without error 00% 10843 - | |
# 4 Short offline Completed without error 00% 10763 - | |
# 5 Extended offline Completed without error 00% 10575 - | |
# 6 Short offline Completed without error 00% 10495 - | |
# 7 Short offline Completed without error 00% 10279 - | |
# 8 Extended offline Completed without error 00% 10191 - | |
# 9 Short offline Completed without error 00% 10111 - | |
#10 Short offline Completed without error 00% 9943 - | |
#11 Extended offline Completed without error 00% 9856 - | |
#12 Short offline Completed without error 00% 9775 - | |
#13 Short offline Completed without error 00% 9534 - | |
#14 Extended offline Completed without error 00% 9447 - | |
#15 Short offline Completed without error 00% 9221 - | |
#16 Extended offline Completed without error 00% 9134 - | |
#17 Short offline Completed without error 00% 9053 - | |
#18 Short offline Completed without error 00% 8838 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 35 Celsius | |
Power Cycle Min/Max Temperature: 26/37 Celsius | |
Lifetime Min/Max Temperature: 20/48 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (389) | |
Index Estimated Time Temperature Celsius | |
390 2017-12-28 15:23 36 ***************** | |
... ..( 19 skipped). .. ***************** | |
410 2017-12-28 15:43 36 ***************** | |
411 2017-12-28 15:44 35 **************** | |
412 2017-12-28 15:45 31 ************ | |
... ..( 30 skipped). .. ************ | |
443 2017-12-28 16:16 31 ************ | |
444 2017-12-28 16:17 30 *********** | |
... ..(169 skipped). .. *********** | |
136 2017-12-28 19:07 30 *********** | |
137 2017-12-28 19:08 31 ************ | |
... ..( 3 skipped). .. ************ | |
141 2017-12-28 19:12 31 ************ | |
142 2017-12-28 19:13 32 ************* | |
... ..( 10 skipped). .. ************* | |
153 2017-12-28 19:24 32 ************* | |
154 2017-12-28 19:25 33 ************** | |
... ..( 7 skipped). .. ************** | |
162 2017-12-28 19:33 33 ************** | |
163 2017-12-28 19:34 34 *************** | |
... ..( 10 skipped). .. *************** | |
174 2017-12-28 19:45 34 *************** | |
175 2017-12-28 19:46 35 **************** | |
... ..( 52 skipped). .. **************** | |
228 2017-12-28 20:39 35 **************** | |
229 2017-12-28 20:40 36 ***************** | |
... ..(139 skipped). .. ***************** | |
369 2017-12-28 23:00 36 ***************** | |
370 2017-12-28 23:01 35 **************** | |
... ..( 7 skipped). .. **************** | |
378 2017-12-28 23:09 35 **************** | |
379 2017-12-28 23:10 36 ***************** | |
... ..( 9 skipped). .. ***************** | |
389 2017-12-28 23:20 36 ***************** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP/SMART Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306952 Vendor specific | |
########## SMART status report for da1 drive (Western Digital Red: WD-WCC4E3TEFJ0V) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 6 | |
3 Spin_Up_Time 0x0027 185 178 021 Pre-fail Always - 7741 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 85 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 10999 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 85 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 83 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 178 | |
194 Temperature_Celsius 0x0022 117 103 000 Old_age Always - 35 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68WT0N0 | |
Serial Number: WD-WCC4E3TEFJ0V | |
LU WWN Device Id: 5 0014ee 20d40947a | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:19 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (52560) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 526) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x703d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 6 | |
3 Spin_Up_Time POS--K 185 178 021 - 7741 | |
4 Start_Stop_Count -O--CK 100 100 000 - 85 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 085 085 000 - 10999 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 85 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 83 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 178 | |
194 Temperature_Celsius -O---K 117 103 000 - 35 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log | |
0xb7 GPL,SL VS 39 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 10994 - | |
# 2 Short offline Completed without error 00% 10931 - | |
# 3 Extended offline Completed without error 00% 10844 - | |
# 4 Short offline Completed without error 00% 10763 - | |
# 5 Extended offline Completed without error 00% 10575 - | |
# 6 Short offline Completed without error 00% 10495 - | |
# 7 Short offline Completed without error 00% 10279 - | |
# 8 Extended offline Completed without error 00% 10192 - | |
# 9 Short offline Completed without error 00% 10111 - | |
#10 Short offline Completed without error 00% 9943 - | |
#11 Extended offline Completed without error 00% 9857 - | |
#12 Short offline Completed without error 00% 9775 - | |
#13 Short offline Completed without error 00% 9534 - | |
#14 Extended offline Completed without error 00% 9447 - | |
#15 Short offline Completed without error 00% 9221 - | |
#16 Extended offline Completed without error 00% 9134 - | |
#17 Short offline Completed without error 00% 9054 - | |
#18 Short offline Completed without error 00% 8838 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 35 Celsius | |
Power Cycle Min/Max Temperature: 27/37 Celsius | |
Lifetime Min/Max Temperature: 3/49 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (396) | |
Index Estimated Time Temperature Celsius | |
397 2017-12-28 15:23 36 ***************** | |
... ..( 17 skipped). .. ***************** | |
415 2017-12-28 15:41 36 ***************** | |
416 2017-12-28 15:42 35 **************** | |
417 2017-12-28 15:43 35 **************** | |
418 2017-12-28 15:44 35 **************** | |
419 2017-12-28 15:45 31 ************ | |
... ..( 77 skipped). .. ************ | |
19 2017-12-28 17:03 31 ************ | |
20 2017-12-28 17:04 30 *********** | |
... ..(122 skipped). .. *********** | |
143 2017-12-28 19:07 30 *********** | |
144 2017-12-28 19:08 31 ************ | |
... ..( 3 skipped). .. ************ | |
148 2017-12-28 19:12 31 ************ | |
149 2017-12-28 19:13 32 ************* | |
... ..( 10 skipped). .. ************* | |
160 2017-12-28 19:24 32 ************* | |
161 2017-12-28 19:25 33 ************** | |
... ..( 6 skipped). .. ************** | |
168 2017-12-28 19:32 33 ************** | |
169 2017-12-28 19:33 34 *************** | |
... ..( 9 skipped). .. *************** | |
179 2017-12-28 19:43 34 *************** | |
180 2017-12-28 19:44 35 **************** | |
... ..( 55 skipped). .. **************** | |
236 2017-12-28 20:40 35 **************** | |
237 2017-12-28 20:41 36 ***************** | |
... ..(100 skipped). .. ***************** | |
338 2017-12-28 22:22 36 ***************** | |
339 2017-12-28 22:23 35 **************** | |
... ..( 3 skipped). .. **************** | |
343 2017-12-28 22:27 35 **************** | |
344 2017-12-28 22:28 36 ***************** | |
... ..( 26 skipped). .. ***************** | |
371 2017-12-28 22:55 36 ***************** | |
372 2017-12-28 22:56 35 **************** | |
... ..( 13 skipped). .. **************** | |
386 2017-12-28 23:10 35 **************** | |
387 2017-12-28 23:11 36 ***************** | |
... ..( 8 skipped). .. ***************** | |
396 2017-12-28 23:20 36 ***************** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP/SMART Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306953 Vendor specific | |
########## SMART status report for da2 drive (Western Digital Red: WD-WCC4E4RXR8LH) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 185 180 021 Pre-fail Always - 7725 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 85 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 10999 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 85 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 83 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 173 | |
194 Temperature_Celsius 0x0022 117 103 000 Old_age Always - 35 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68WT0N0 | |
Serial Number: WD-WCC4E4RXR8LH | |
LU WWN Device Id: 5 0014ee 262a751d6 | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:19 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (52020) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 520) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x703d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 185 180 021 - 7725 | |
4 Start_Stop_Count -O--CK 100 100 000 - 85 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 085 085 000 - 10999 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 85 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 83 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 173 | |
194 Temperature_Celsius -O---K 117 103 000 - 35 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log | |
0xb7 GPL,SL VS 39 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 10994 - | |
# 2 Short offline Completed without error 00% 10931 - | |
# 3 Extended offline Completed without error 00% 10843 - | |
# 4 Short offline Completed without error 00% 10763 - | |
# 5 Extended offline Completed without error 00% 10575 - | |
# 6 Short offline Completed without error 00% 10495 - | |
# 7 Short offline Completed without error 00% 10279 - | |
# 8 Extended offline Completed without error 00% 10191 - | |
# 9 Short offline Completed without error 00% 10111 - | |
#10 Short offline Completed without error 00% 9943 - | |
#11 Extended offline Completed without error 00% 9856 - | |
#12 Short offline Completed without error 00% 9775 - | |
#13 Short offline Completed without error 00% 9534 - | |
#14 Extended offline Completed without error 00% 9447 - | |
#15 Short offline Completed without error 00% 9221 - | |
#16 Extended offline Completed without error 00% 9134 - | |
#17 Short offline Completed without error 00% 9054 - | |
#18 Short offline Completed without error 00% 8838 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 35 Celsius | |
Power Cycle Min/Max Temperature: 27/36 Celsius | |
Lifetime Min/Max Temperature: 3/49 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (393) | |
Index Estimated Time Temperature Celsius | |
394 2017-12-28 15:23 35 **************** | |
... ..( 20 skipped). .. **************** | |
415 2017-12-28 15:44 35 **************** | |
416 2017-12-28 15:45 30 *********** | |
... ..(202 skipped). .. *********** | |
141 2017-12-28 19:08 30 *********** | |
142 2017-12-28 19:09 31 ************ | |
... ..( 4 skipped). .. ************ | |
147 2017-12-28 19:14 31 ************ | |
148 2017-12-28 19:15 32 ************* | |
... ..( 9 skipped). .. ************* | |
158 2017-12-28 19:25 32 ************* | |
159 2017-12-28 19:26 33 ************** | |
... ..( 9 skipped). .. ************** | |
169 2017-12-28 19:36 33 ************** | |
170 2017-12-28 19:37 34 *************** | |
... ..( 10 skipped). .. *************** | |
181 2017-12-28 19:48 34 *************** | |
182 2017-12-28 19:49 35 **************** | |
... ..(210 skipped). .. **************** | |
393 2017-12-28 23:20 35 **************** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP/SMART Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306928 Vendor specific | |
########## SMART status report for da3 drive (Western Digital Red: WD-WCC4E3TEFCJX) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 53 | |
3 Spin_Up_Time 0x0027 185 180 021 Pre-fail Always - 7725 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 85 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 10998 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 85 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 83 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 176 | |
194 Temperature_Celsius 0x0022 120 105 000 Old_age Always - 32 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 4 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68WT0N0 | |
Serial Number: WD-WCC4E3TEFCJX | |
LU WWN Device Id: 5 0014ee 2b7eccc0b | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:19 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (52380) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 524) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x703d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 53 | |
3 Spin_Up_Time POS--K 185 180 021 - 7725 | |
4 Start_Stop_Count -O--CK 100 100 000 - 85 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 085 085 000 - 10998 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 85 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 83 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 176 | |
194 Temperature_Celsius -O---K 120 105 000 - 32 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 4 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log | |
0xb7 GPL,SL VS 39 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
Device Error Count: 25 (device log contains only the most recent 24 errors) | |
CR = Command Register | |
FEATR = Features Register | |
COUNT = Count (was: Sector Count) Register | |
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 | |
LH = LBA High (was: Cylinder High) Register ] LBA | |
LM = LBA Mid (was: Cylinder Low) Register ] Register | |
LL = LBA Low (was: Sector Number) Register ] | |
DV = Device (was: Device/Head) Register | |
DC = Device Control Register | |
ER = Error register | |
ST = Status register | |
Powered_Up_Time is measured from power on, and printed as | |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
Error 25 [0] occurred at disk power-on lifetime: 10986 hours (457 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
40 -- 51 00 00 00 00 09 52 cb a8 40 00 Error: UNC at LBA = 0x0952cba8 = 156421032 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 01 00 00 38 00 00 09 52 d5 40 40 00 14d+14:36:36.432 READ FPDMA QUEUED | |
60 01 00 00 30 00 00 09 52 d4 40 40 00 14d+14:36:36.432 READ FPDMA QUEUED | |
60 01 00 00 28 00 00 09 52 d3 40 40 00 14d+14:36:36.432 READ FPDMA QUEUED | |
60 01 00 00 20 00 00 09 52 d2 40 40 00 14d+14:36:36.432 READ FPDMA QUEUED | |
60 01 00 00 18 00 00 09 52 d1 40 40 00 14d+14:36:36.432 READ FPDMA QUEUED | |
Error 24 [23] occurred at disk power-on lifetime: 10986 hours (457 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
40 -- 51 00 00 00 00 09 52 33 d8 40 00 Error: WP at LBA = 0x095233d8 = 156382168 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
61 00 40 00 28 00 00 2c 00 52 88 40 00 14d+14:36:25.310 WRITE FPDMA QUEUED | |
61 00 40 00 20 00 00 2c 00 52 c8 40 00 14d+14:36:25.310 WRITE FPDMA QUEUED | |
60 00 80 00 18 00 00 09 52 35 d8 40 00 14d+14:36:25.310 READ FPDMA QUEUED | |
60 01 00 00 10 00 00 09 52 34 d8 40 00 14d+14:36:25.309 READ FPDMA QUEUED | |
60 01 00 00 08 00 00 09 52 33 d8 40 00 14d+14:36:25.309 READ FPDMA QUEUED | |
Error 23 [22] occurred at disk power-on lifetime: 10986 hours (457 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
40 -- 51 00 00 00 00 09 52 32 70 40 00 Error: WP at LBA = 0x09523270 = 156381808 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
61 00 40 00 30 00 00 2c 00 52 88 40 00 14d+14:36:21.953 WRITE FPDMA QUEUED | |
61 00 40 00 00 00 00 2c 00 52 c8 40 00 14d+14:36:21.953 WRITE FPDMA QUEUED | |
60 00 80 00 28 00 00 09 52 35 d8 40 00 14d+14:36:21.556 READ FPDMA QUEUED | |
60 01 00 00 20 00 00 09 52 34 d8 40 00 14d+14:36:21.556 READ FPDMA QUEUED | |
60 01 00 00 18 00 00 09 52 33 d8 40 00 14d+14:36:21.556 READ FPDMA QUEUED | |
Error 22 [21] occurred at disk power-on lifetime: 10986 hours (457 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
40 -- 51 00 00 00 00 09 50 29 c0 40 00 Error: UNC at LBA = 0x095029c0 = 156248512 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 10 00 58 00 01 d1 c0 bc 90 40 00 14d+14:36:11.237 READ FPDMA QUEUED | |
60 00 10 00 50 00 01 d1 c0 ba 90 40 00 14d+14:36:11.237 READ FPDMA QUEUED | |
60 00 10 00 48 00 00 00 40 02 90 40 00 14d+14:36:11.237 READ FPDMA QUEUED | |
60 00 80 00 40 00 00 09 50 2f 18 40 00 14d+14:36:11.237 READ FPDMA QUEUED | |
60 01 00 00 38 00 00 09 50 2e 18 40 00 14d+14:36:11.237 READ FPDMA QUEUED | |
Error 21 [20] occurred at disk power-on lifetime: 10986 hours (457 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
40 -- 51 00 00 00 00 09 50 27 f0 40 00 Error: UNC at LBA = 0x095027f0 = 156248048 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 10 00 70 00 01 d1 c0 bc 90 40 00 14d+14:36:07.317 READ FPDMA QUEUED | |
60 00 10 00 68 00 01 d1 c0 ba 90 40 00 14d+14:36:07.317 READ FPDMA QUEUED | |
60 00 10 00 60 00 00 00 40 02 90 40 00 14d+14:36:07.317 READ FPDMA QUEUED | |
60 00 80 00 58 00 00 09 50 2f 18 40 00 14d+14:36:07.317 READ FPDMA QUEUED | |
60 01 00 00 50 00 00 09 50 2e 18 40 00 14d+14:36:07.317 READ FPDMA QUEUED | |
Error 20 [19] occurred at disk power-on lifetime: 10986 hours (457 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
40 -- 51 00 00 00 00 09 50 24 30 40 00 Error: UNC at LBA = 0x09502430 = 156247088 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 c8 00 40 00 00 09 50 2b 50 40 00 14d+14:36:03.575 READ FPDMA QUEUED | |
60 01 00 00 38 00 00 09 50 2a 50 40 00 14d+14:36:03.575 READ FPDMA QUEUED | |
60 01 00 00 30 00 00 09 50 29 50 40 00 14d+14:36:03.575 READ FPDMA QUEUED | |
60 01 00 00 28 00 00 09 50 28 50 40 00 14d+14:36:03.575 READ FPDMA QUEUED | |
60 01 00 00 20 00 00 09 50 27 50 40 00 14d+14:36:03.575 READ FPDMA QUEUED | |
Error 19 [18] occurred at disk power-on lifetime: 10986 hours (457 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
40 -- 51 00 00 00 00 09 50 16 08 40 00 Error: UNC at LBA = 0x09501608 = 156243464 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 c0 00 08 00 00 09 50 16 d8 40 00 14d+14:35:59.821 READ FPDMA QUEUED | |
60 01 00 00 00 00 00 09 50 15 d8 40 00 14d+14:35:59.821 READ FPDMA QUEUED | |
ea 00 00 00 00 00 00 00 00 00 00 40 00 14d+14:35:59.821 FLUSH CACHE EXT | |
ea 00 00 00 00 00 00 00 00 00 00 40 00 14d+14:35:59.821 FLUSH CACHE EXT | |
ea 00 00 00 00 00 00 00 00 00 00 40 00 14d+14:35:59.821 FLUSH CACHE EXT | |
Error 18 [17] occurred at disk power-on lifetime: 10986 hours (457 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
40 -- 51 00 00 00 00 09 50 13 58 40 00 Error: WP at LBA = 0x09501358 = 156242776 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
61 00 40 00 48 00 00 2b ff f8 d0 40 00 14d+14:35:56.406 WRITE FPDMA QUEUED | |
61 00 40 00 40 00 00 2b ff f8 90 40 00 14d+14:35:56.406 WRITE FPDMA QUEUED | |
61 00 10 00 38 00 00 2b ff f8 80 40 00 14d+14:35:56.405 WRITE FPDMA QUEUED | |
61 00 40 00 30 00 00 2b ff f8 40 40 00 14d+14:35:56.405 WRITE FPDMA QUEUED | |
60 00 c0 00 28 00 00 09 50 16 d8 40 00 14d+14:35:56.405 READ FPDMA QUEUED | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 10994 - | |
# 2 Short offline Completed without error 00% 10930 - | |
# 3 Extended offline Completed without error 00% 10843 - | |
# 4 Short offline Completed without error 00% 10763 - | |
# 5 Extended offline Completed without error 00% 10759 - | |
# 6 Extended offline Completed without error 00% 10714 - | |
# 7 Extended offline Completed: read failure 90% 10565 32332392 | |
# 8 Short offline Completed without error 00% 10495 - | |
# 9 Short offline Completed without error 00% 10279 - | |
#10 Extended offline Completed without error 00% 10191 - | |
#11 Short offline Completed without error 00% 10111 - | |
#12 Short offline Completed without error 00% 9943 - | |
#13 Extended offline Completed without error 00% 9856 - | |
#14 Short offline Completed without error 00% 9775 - | |
#15 Short offline Completed without error 00% 9534 - | |
#16 Extended offline Completed without error 00% 9447 - | |
#17 Short offline Completed without error 00% 9221 - | |
#18 Extended offline Completed without error 00% 9134 - | |
1 of 1 failed self-tests are outdated by newer successful extended offline self-test # 3 | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 32 Celsius | |
Power Cycle Min/Max Temperature: 26/35 Celsius | |
Lifetime Min/Max Temperature: 20/47 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (382) | |
Index Estimated Time Temperature Celsius | |
383 2017-12-28 15:23 32 ************* | |
... ..( 20 skipped). .. ************* | |
404 2017-12-28 15:44 32 ************* | |
405 2017-12-28 15:45 29 ********** | |
... ..(206 skipped). .. ********** | |
134 2017-12-28 19:12 29 ********** | |
135 2017-12-28 19:13 30 *********** | |
... ..( 3 skipped). .. *********** | |
139 2017-12-28 19:17 30 *********** | |
140 2017-12-28 19:18 31 ************ | |
... ..( 13 skipped). .. ************ | |
154 2017-12-28 19:32 31 ************ | |
155 2017-12-28 19:33 32 ************* | |
... ..(226 skipped). .. ************* | |
382 2017-12-28 23:20 32 ************* | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP/SMART Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306933 Vendor specific | |
########## SMART status report for da4 drive (Western Digital Red: WD-WCC4E4RXRSAP) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 25 | |
3 Spin_Up_Time 0x0027 182 177 021 Pre-fail Always - 7875 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 85 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 10998 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 85 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 83 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 174 | |
194 Temperature_Celsius 0x0022 120 106 000 Old_age Always - 32 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 3 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68WT0N0 | |
Serial Number: WD-WCC4E4RXRSAP | |
LU WWN Device Id: 5 0014ee 2b7fd20cf | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:20 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (52560) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 526) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x703d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 25 | |
3 Spin_Up_Time POS--K 182 177 021 - 7875 | |
4 Start_Stop_Count -O--CK 100 100 000 - 85 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 085 085 000 - 10998 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 85 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 83 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 174 | |
194 Temperature_Celsius -O---K 120 106 000 - 32 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 3 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log | |
0xb7 GPL,SL VS 39 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
Device Error Count: 2 | |
CR = Command Register | |
FEATR = Features Register | |
COUNT = Count (was: Sector Count) Register | |
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 | |
LH = LBA High (was: Cylinder High) Register ] LBA | |
LM = LBA Mid (was: Cylinder Low) Register ] Register | |
LL = LBA Low (was: Sector Number) Register ] | |
DV = Device (was: Device/Head) Register | |
DC = Device Control Register | |
ER = Error register | |
ST = Status register | |
Powered_Up_Time is measured from power on, and printed as | |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
Error 2 [1] occurred at disk power-on lifetime: 10986 hours (457 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
40 -- 51 00 00 00 00 09 13 36 b8 40 00 Error: UNC at LBA = 0x091336b8 = 152254136 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 10 00 58 00 01 d1 c0 bc 90 40 00 14d+14:35:04.769 READ FPDMA QUEUED | |
60 00 10 00 10 00 01 d1 c0 ba 90 40 00 14d+14:35:04.769 READ FPDMA QUEUED | |
60 00 10 00 50 00 00 00 40 02 90 40 00 14d+14:35:04.769 READ FPDMA QUEUED | |
60 01 00 00 48 00 00 09 13 3c 40 40 00 14d+14:35:04.769 READ FPDMA QUEUED | |
60 01 00 00 40 00 00 09 13 3b 40 40 00 14d+14:35:04.769 READ FPDMA QUEUED | |
Error 1 [0] occurred at disk power-on lifetime: 10986 hours (457 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
40 -- 51 00 00 00 00 09 13 34 f8 40 00 Error: UNC at LBA = 0x091334f8 = 152253688 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
60 00 40 00 10 00 00 09 13 35 00 40 00 14d+14:35:01.001 READ FPDMA QUEUED | |
60 01 00 00 08 00 00 09 13 34 00 40 00 14d+14:35:01.000 READ FPDMA QUEUED | |
60 01 00 00 00 00 00 09 13 33 00 40 00 14d+14:35:01.000 READ FPDMA QUEUED | |
60 00 c0 00 08 00 00 09 13 09 00 40 00 14d+14:35:00.999 READ FPDMA QUEUED | |
60 01 00 00 00 00 00 09 13 08 00 40 00 14d+14:35:00.999 READ FPDMA QUEUED | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 10994 - | |
# 2 Short offline Completed without error 00% 10930 - | |
# 3 Extended offline Completed without error 00% 10843 - | |
# 4 Short offline Completed without error 00% 10763 - | |
# 5 Extended offline Completed without error 00% 10575 - | |
# 6 Short offline Completed without error 00% 10495 - | |
# 7 Short offline Completed without error 00% 10279 - | |
# 8 Extended offline Completed without error 00% 10191 - | |
# 9 Short offline Completed without error 00% 10111 - | |
#10 Short offline Completed without error 00% 9943 - | |
#11 Extended offline Completed without error 00% 9856 - | |
#12 Short offline Completed without error 00% 9775 - | |
#13 Short offline Completed without error 00% 9534 - | |
#14 Extended offline Completed without error 00% 9447 - | |
#15 Short offline Completed without error 00% 9221 - | |
#16 Extended offline Completed without error 00% 9134 - | |
#17 Short offline Completed without error 00% 9053 - | |
#18 Short offline Completed without error 00% 8838 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 32 Celsius | |
Power Cycle Min/Max Temperature: 26/34 Celsius | |
Lifetime Min/Max Temperature: 3/46 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (384) | |
Index Estimated Time Temperature Celsius | |
385 2017-12-28 15:23 32 ************* | |
... ..( 20 skipped). .. ************* | |
406 2017-12-28 15:44 32 ************* | |
407 2017-12-28 15:45 29 ********** | |
... ..(209 skipped). .. ********** | |
139 2017-12-28 19:15 29 ********** | |
140 2017-12-28 19:16 30 *********** | |
... ..( 4 skipped). .. *********** | |
145 2017-12-28 19:21 30 *********** | |
146 2017-12-28 19:22 31 ************ | |
... ..( 17 skipped). .. ************ | |
164 2017-12-28 19:40 31 ************ | |
165 2017-12-28 19:41 32 ************* | |
... ..(218 skipped). .. ************* | |
384 2017-12-28 23:20 32 ************* | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP/SMART Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306928 Vendor specific | |
########## SMART status report for da5 drive (Western Digital Red: WD-WCC4E4AH9KJ1) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1 | |
3 Spin_Up_Time 0x0027 183 176 021 Pre-fail Always - 7841 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 85 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 10998 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 85 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 83 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 248 | |
194 Temperature_Celsius 0x0022 122 110 000 Old_age Always - 30 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68WT0N0 | |
Serial Number: WD-WCC4E4AH9KJ1 | |
LU WWN Device Id: 5 0014ee 262a75858 | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:20 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (52680) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 527) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x703d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 | |
3 Spin_Up_Time POS--K 183 176 021 - 7841 | |
4 Start_Stop_Count -O--CK 100 100 000 - 85 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 085 085 000 - 10998 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 85 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 83 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 248 | |
194 Temperature_Celsius -O---K 122 110 000 - 30 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log | |
0xb7 GPL,SL VS 39 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 10994 - | |
# 2 Short offline Completed without error 00% 10930 - | |
# 3 Extended offline Completed without error 00% 10843 - | |
# 4 Short offline Completed without error 00% 10762 - | |
# 5 Extended offline Completed without error 00% 10575 - | |
# 6 Short offline Completed without error 00% 10494 - | |
# 7 Short offline Completed without error 00% 10278 - | |
# 8 Extended offline Completed without error 00% 10191 - | |
# 9 Short offline Completed without error 00% 10111 - | |
#10 Short offline Completed without error 00% 9943 - | |
#11 Extended offline Completed without error 00% 9856 - | |
#12 Short offline Completed without error 00% 9775 - | |
#13 Short offline Completed without error 00% 9534 - | |
#14 Extended offline Completed without error 00% 9447 - | |
#15 Short offline Completed without error 00% 9221 - | |
#16 Extended offline Completed without error 00% 9134 - | |
#17 Short offline Completed without error 00% 9053 - | |
#18 Short offline Completed without error 00% 8837 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 30 Celsius | |
Power Cycle Min/Max Temperature: 25/32 Celsius | |
Lifetime Min/Max Temperature: 19/42 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (369) | |
Index Estimated Time Temperature Celsius | |
370 2017-12-28 15:23 30 *********** | |
... ..( 20 skipped). .. *********** | |
391 2017-12-28 15:44 30 *********** | |
392 2017-12-28 15:45 27 ******** | |
... ..(182 skipped). .. ******** | |
97 2017-12-28 18:48 27 ******** | |
98 2017-12-28 18:49 26 ******* | |
... ..( 10 skipped). .. ******* | |
109 2017-12-28 19:00 26 ******* | |
110 2017-12-28 19:01 27 ******** | |
... ..( 6 skipped). .. ******** | |
117 2017-12-28 19:08 27 ******** | |
118 2017-12-28 19:09 28 ********* | |
... ..( 8 skipped). .. ********* | |
127 2017-12-28 19:18 28 ********* | |
128 2017-12-28 19:19 29 ********** | |
... ..( 13 skipped). .. ********** | |
142 2017-12-28 19:33 29 ********** | |
143 2017-12-28 19:34 30 *********** | |
... ..( 11 skipped). .. *********** | |
155 2017-12-28 19:46 30 *********** | |
156 2017-12-28 19:47 31 ************ | |
... ..( 8 skipped). .. ************ | |
165 2017-12-28 19:56 31 ************ | |
166 2017-12-28 19:57 30 *********** | |
... ..( 17 skipped). .. *********** | |
184 2017-12-28 20:15 30 *********** | |
185 2017-12-28 20:16 31 ************ | |
... ..( 9 skipped). .. ************ | |
195 2017-12-28 20:26 31 ************ | |
196 2017-12-28 20:27 30 *********** | |
... ..( 14 skipped). .. *********** | |
211 2017-12-28 20:42 30 *********** | |
212 2017-12-28 20:43 31 ************ | |
... ..( 10 skipped). .. ************ | |
223 2017-12-28 20:54 31 ************ | |
224 2017-12-28 20:55 30 *********** | |
... ..( 17 skipped). .. *********** | |
242 2017-12-28 21:13 30 *********** | |
243 2017-12-28 21:14 31 ************ | |
... ..( 14 skipped). .. ************ | |
258 2017-12-28 21:29 31 ************ | |
259 2017-12-28 21:30 30 *********** | |
... ..( 23 skipped). .. *********** | |
283 2017-12-28 21:54 30 *********** | |
284 2017-12-28 21:55 31 ************ | |
... ..( 5 skipped). .. ************ | |
290 2017-12-28 22:01 31 ************ | |
291 2017-12-28 22:02 30 *********** | |
... ..( 77 skipped). .. *********** | |
369 2017-12-28 23:20 30 *********** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP/SMART Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306943 Vendor specific | |
########## SMART status report for da6 drive (Western Digital Red: WD-WCC4EDUYF75U) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 185 179 021 Pre-fail Always - 7733 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 109 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 23885 | |
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 94 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 454 | |
194 Temperature_Celsius 0x0022 115 102 000 Old_age Always - 37 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68WT0N0 | |
Serial Number: WD-WCC4EDUYF75U | |
LU WWN Device Id: 5 0014ee 2b57ef5cc | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:20 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (51840) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 518) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x703d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 185 179 021 - 7733 | |
4 Start_Stop_Count -O--CK 100 100 000 - 109 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 068 068 000 - 23885 | |
10 Spin_Retry_Count -O--CK 100 100 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 100 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 109 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 94 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 454 | |
194 Temperature_Celsius -O---K 115 102 000 - 37 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 23880 - | |
# 2 Short offline Completed without error 00% 23817 - | |
# 3 Extended offline Completed without error 00% 23735 - | |
# 4 Short offline Completed without error 00% 23649 - | |
# 5 Extended offline Completed without error 00% 23463 - | |
# 6 Short offline Completed without error 00% 23382 - | |
# 7 Short offline Completed without error 00% 23166 - | |
# 8 Extended offline Completed without error 00% 23080 - | |
# 9 Short offline Completed without error 00% 22999 - | |
#10 Short offline Completed without error 00% 22831 - | |
#11 Extended offline Completed without error 00% 22744 - | |
#12 Short offline Completed without error 00% 22663 - | |
#13 Short offline Completed without error 00% 22422 - | |
#14 Extended offline Completed without error 00% 22335 - | |
#15 Short offline Completed without error 00% 22109 - | |
#16 Extended offline Completed without error 00% 22022 - | |
#17 Short offline Completed without error 00% 21941 - | |
#18 Short offline Completed without error 00% 21725 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 37 Celsius | |
Power Cycle Min/Max Temperature: 26/38 Celsius | |
Lifetime Min/Max Temperature: 19/50 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (56) | |
Index Estimated Time Temperature Celsius | |
57 2017-12-28 15:23 37 ****************** | |
... ..( 92 skipped). .. ****************** | |
150 2017-12-28 16:56 37 ****************** | |
151 2017-12-28 16:57 32 ************* | |
... ..(209 skipped). .. ************* | |
361 2017-12-28 20:27 32 ************* | |
362 2017-12-28 20:28 33 ************** | |
... ..( 4 skipped). .. ************** | |
367 2017-12-28 20:33 33 ************** | |
368 2017-12-28 20:34 34 *************** | |
... ..( 5 skipped). .. *************** | |
374 2017-12-28 20:40 34 *************** | |
375 2017-12-28 20:41 35 **************** | |
... ..( 7 skipped). .. **************** | |
383 2017-12-28 20:49 35 **************** | |
384 2017-12-28 20:50 36 ***************** | |
... ..( 10 skipped). .. ***************** | |
395 2017-12-28 21:01 36 ***************** | |
396 2017-12-28 21:02 37 ****************** | |
... ..(137 skipped). .. ****************** | |
56 2017-12-28 23:20 37 ****************** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP/SMART Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306908 Vendor specific | |
########## SMART status report for da7 drive (Western Digital Red: WD-WCC4EKUPSL76) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 186 179 021 Pre-fail Always - 7700 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 110 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 23886 | |
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 110 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 95 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 442 | |
194 Temperature_Celsius 0x0022 115 096 000 Old_age Always - 37 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68WT0N0 | |
Serial Number: WD-WCC4EKUPSL76 | |
LU WWN Device Id: 5 0014ee 20ad39f1c | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:21 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (50760) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 508) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x703d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 186 179 021 - 7700 | |
4 Start_Stop_Count -O--CK 100 100 000 - 110 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 068 068 000 - 23886 | |
10 Spin_Retry_Count -O--CK 100 100 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 100 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 110 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 95 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 442 | |
194 Temperature_Celsius -O---K 115 096 000 - 37 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 23881 - | |
# 2 Short offline Completed without error 00% 23818 - | |
# 3 Extended offline Completed without error 00% 23736 - | |
# 4 Short offline Completed without error 00% 23650 - | |
# 5 Extended offline Completed without error 00% 23464 - | |
# 6 Short offline Completed without error 00% 23383 - | |
# 7 Short offline Completed without error 00% 23167 - | |
# 8 Extended offline Completed without error 00% 23081 - | |
# 9 Short offline Completed without error 00% 23000 - | |
#10 Short offline Completed without error 00% 22832 - | |
#11 Extended offline Completed without error 00% 22745 - | |
#12 Short offline Completed without error 00% 22664 - | |
#13 Short offline Completed without error 00% 22423 - | |
#14 Extended offline Completed without error 00% 22336 - | |
#15 Short offline Completed without error 00% 22110 - | |
#16 Extended offline Completed without error 00% 22023 - | |
#17 Short offline Completed without error 00% 21942 - | |
#18 Short offline Completed without error 00% 21726 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 37 Celsius | |
Power Cycle Min/Max Temperature: 27/38 Celsius | |
Lifetime Min/Max Temperature: 20/56 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (114) | |
Index Estimated Time Temperature Celsius | |
115 2017-12-28 15:23 37 ****************** | |
... ..( 92 skipped). .. ****************** | |
208 2017-12-28 16:56 37 ****************** | |
209 2017-12-28 16:57 32 ************* | |
... ..(208 skipped). .. ************* | |
418 2017-12-28 20:26 32 ************* | |
419 2017-12-28 20:27 33 ************** | |
... ..( 3 skipped). .. ************** | |
423 2017-12-28 20:31 33 ************** | |
424 2017-12-28 20:32 34 *************** | |
... ..( 5 skipped). .. *************** | |
430 2017-12-28 20:38 34 *************** | |
431 2017-12-28 20:39 35 **************** | |
... ..( 6 skipped). .. **************** | |
438 2017-12-28 20:46 35 **************** | |
439 2017-12-28 20:47 36 ***************** | |
... ..( 9 skipped). .. ***************** | |
449 2017-12-28 20:57 36 ***************** | |
450 2017-12-28 20:58 37 ****************** | |
... ..(141 skipped). .. ****************** | |
114 2017-12-28 23:20 37 ****************** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP/SMART Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306963 Vendor specific | |
########## SMART status report for da8 drive (Western Digital Red: WD-WCC4E5PKH3A0) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 179 174 021 Pre-fail Always - 8025 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 110 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 24052 | |
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 110 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 92 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 451 | |
194 Temperature_Celsius 0x0022 115 100 000 Old_age Always - 37 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68WT0N0 | |
Serial Number: WD-WCC4E5PKH3A0 | |
LU WWN Device Id: 5 0014ee 2608e3c7e | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:21 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (52380) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 524) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x703d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 179 174 021 - 8025 | |
4 Start_Stop_Count -O--CK 100 100 000 - 110 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 068 068 000 - 24052 | |
10 Spin_Retry_Count -O--CK 100 100 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 100 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 110 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 92 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 451 | |
194 Temperature_Celsius -O---K 115 100 000 - 37 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 24047 - | |
# 2 Short offline Completed without error 00% 23984 - | |
# 3 Extended offline Completed without error 00% 23902 - | |
# 4 Short offline Completed without error 00% 23816 - | |
# 5 Extended offline Completed without error 00% 23629 - | |
# 6 Short offline Completed without error 00% 23548 - | |
# 7 Short offline Completed without error 00% 23332 - | |
# 8 Extended offline Completed without error 00% 23246 - | |
# 9 Short offline Completed without error 00% 23164 - | |
#10 Short offline Completed without error 00% 22997 - | |
#11 Extended offline Completed without error 00% 22910 - | |
#12 Short offline Completed without error 00% 22829 - | |
#13 Short offline Completed without error 00% 22588 - | |
#14 Extended offline Completed without error 00% 22501 - | |
#15 Short offline Completed without error 00% 22275 - | |
#16 Extended offline Completed without error 00% 22188 - | |
#17 Short offline Completed without error 00% 22107 - | |
#18 Short offline Completed without error 00% 21891 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 37 Celsius | |
Power Cycle Min/Max Temperature: 27/37 Celsius | |
Lifetime Min/Max Temperature: 20/52 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (356) | |
Index Estimated Time Temperature Celsius | |
357 2017-12-28 15:23 37 ****************** | |
... ..(142 skipped). .. ****************** | |
22 2017-12-28 17:46 37 ****************** | |
23 2017-12-28 17:47 32 ************* | |
... ..( 73 skipped). .. ************* | |
97 2017-12-28 19:01 32 ************* | |
98 2017-12-28 19:02 31 ************ | |
... ..(126 skipped). .. ************ | |
225 2017-12-28 21:09 31 ************ | |
226 2017-12-28 21:10 32 ************* | |
... ..( 8 skipped). .. ************* | |
235 2017-12-28 21:19 32 ************* | |
236 2017-12-28 21:20 33 ************** | |
... ..( 4 skipped). .. ************** | |
241 2017-12-28 21:25 33 ************** | |
242 2017-12-28 21:26 34 *************** | |
... ..( 5 skipped). .. *************** | |
248 2017-12-28 21:32 34 *************** | |
249 2017-12-28 21:33 35 **************** | |
... ..( 8 skipped). .. **************** | |
258 2017-12-28 21:42 35 **************** | |
259 2017-12-28 21:43 36 ***************** | |
... ..( 14 skipped). .. ***************** | |
274 2017-12-28 21:58 36 ***************** | |
275 2017-12-28 21:59 37 ****************** | |
... ..( 80 skipped). .. ****************** | |
356 2017-12-28 23:20 37 ****************** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP/SMART Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306934 Vendor specific | |
########## SMART status report for da9 drive (Western Digital Red: WD-WCC4EHJAZ0YF) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 180 176 021 Pre-fail Always - 7966 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 131 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 067 067 000 Old_age Always - 24147 | |
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 131 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 95 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 474 | |
194 Temperature_Celsius 0x0022 116 099 000 Old_age Always - 36 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68WT0N0 | |
Serial Number: WD-WCC4EHJAZ0YF | |
LU WWN Device Id: 5 0014ee 20b0475c6 | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:21 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (52320) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 523) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x703d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 180 176 021 - 7966 | |
4 Start_Stop_Count -O--CK 100 100 000 - 131 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 067 067 000 - 24147 | |
10 Spin_Retry_Count -O--CK 100 100 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 100 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 131 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 95 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 474 | |
194 Temperature_Celsius -O---K 116 099 000 - 36 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 24142 - | |
# 2 Short offline Completed without error 00% 24079 - | |
# 3 Extended offline Completed without error 00% 23997 - | |
# 4 Short offline Completed without error 00% 23911 - | |
# 5 Extended offline Completed without error 00% 23725 - | |
# 6 Short offline Completed without error 00% 23644 - | |
# 7 Short offline Completed without error 00% 23428 - | |
# 8 Extended offline Completed without error 00% 23342 - | |
# 9 Short offline Completed without error 00% 23260 - | |
#10 Short offline Completed without error 00% 23092 - | |
#11 Extended offline Completed without error 00% 23006 - | |
#12 Short offline Completed without error 00% 22925 - | |
#13 Short offline Completed without error 00% 22684 - | |
#14 Extended offline Completed without error 00% 22597 - | |
#15 Short offline Completed without error 00% 22371 - | |
#16 Extended offline Completed without error 00% 22284 - | |
#17 Short offline Completed without error 00% 22203 - | |
#18 Short offline Completed without error 00% 21987 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 36 Celsius | |
Power Cycle Min/Max Temperature: 27/37 Celsius | |
Lifetime Min/Max Temperature: 20/53 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (319) | |
Index Estimated Time Temperature Celsius | |
320 2017-12-28 15:23 37 ****************** | |
... ..( 22 skipped). .. ****************** | |
343 2017-12-28 15:46 37 ****************** | |
344 2017-12-28 15:47 36 ***************** | |
... ..( 10 skipped). .. ***************** | |
355 2017-12-28 15:58 36 ***************** | |
356 2017-12-28 15:59 37 ****************** | |
... ..( 9 skipped). .. ****************** | |
366 2017-12-28 16:09 37 ****************** | |
367 2017-12-28 16:10 36 ***************** | |
... ..( 95 skipped). .. ***************** | |
463 2017-12-28 17:46 36 ***************** | |
464 2017-12-28 17:47 31 ************ | |
... ..(205 skipped). .. ************ | |
192 2017-12-28 21:13 31 ************ | |
193 2017-12-28 21:14 32 ************* | |
... ..( 7 skipped). .. ************* | |
201 2017-12-28 21:22 32 ************* | |
202 2017-12-28 21:23 33 ************** | |
... ..( 5 skipped). .. ************** | |
208 2017-12-28 21:29 33 ************** | |
209 2017-12-28 21:30 34 *************** | |
... ..( 6 skipped). .. *************** | |
216 2017-12-28 21:37 34 *************** | |
217 2017-12-28 21:38 35 **************** | |
... ..( 9 skipped). .. **************** | |
227 2017-12-28 21:48 35 **************** | |
228 2017-12-28 21:49 36 ***************** | |
... ..( 56 skipped). .. ***************** | |
285 2017-12-28 22:46 36 ***************** | |
286 2017-12-28 22:47 37 ****************** | |
... ..( 17 skipped). .. ****************** | |
304 2017-12-28 23:05 37 ****************** | |
305 2017-12-28 23:06 36 ***************** | |
... ..( 10 skipped). .. ***************** | |
316 2017-12-28 23:17 36 ***************** | |
317 2017-12-28 23:18 37 ****************** | |
318 2017-12-28 23:19 37 ****************** | |
319 2017-12-28 23:20 37 ****************** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP/SMART Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306944 Vendor specific | |
########## SMART status report for da10 drive (Western Digital Red: WD-WCC4EKPA0ERE) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 3 | |
3 Spin_Up_Time 0x0027 179 172 021 Pre-fail Always - 8033 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 131 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 067 067 000 Old_age Always - 24147 | |
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 131 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 95 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 475 | |
194 Temperature_Celsius 0x0022 118 096 000 Old_age Always - 34 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68WT0N0 | |
Serial Number: WD-WCC4EKPA0ERE | |
LU WWN Device Id: 5 0014ee 2b5af74ac | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:22 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (52860) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 529) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x703d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 3 | |
3 Spin_Up_Time POS--K 179 172 021 - 8033 | |
4 Start_Stop_Count -O--CK 100 100 000 - 131 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 067 067 000 - 24147 | |
10 Spin_Retry_Count -O--CK 100 100 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 100 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 131 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 95 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 475 | |
194 Temperature_Celsius -O---K 118 096 000 - 34 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 24142 - | |
# 2 Short offline Completed without error 00% 24079 - | |
# 3 Extended offline Completed without error 00% 23997 - | |
# 4 Short offline Completed without error 00% 23911 - | |
# 5 Extended offline Completed without error 00% 23725 - | |
# 6 Short offline Completed without error 00% 23644 - | |
# 7 Short offline Completed without error 00% 23428 - | |
# 8 Extended offline Completed without error 00% 23342 - | |
# 9 Short offline Completed without error 00% 23260 - | |
#10 Short offline Completed without error 00% 23092 - | |
#11 Extended offline Completed without error 00% 23006 - | |
#12 Short offline Completed without error 00% 22925 - | |
#13 Short offline Completed without error 00% 22683 - | |
#14 Extended offline Completed without error 00% 22597 - | |
#15 Short offline Completed without error 00% 22371 - | |
#16 Extended offline Completed without error 00% 22284 - | |
#17 Short offline Completed without error 00% 22203 - | |
#18 Short offline Completed without error 00% 21987 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 34 Celsius | |
Power Cycle Min/Max Temperature: 26/35 Celsius | |
Lifetime Min/Max Temperature: 19/56 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (321) | |
Index Estimated Time Temperature Celsius | |
322 2017-12-28 15:23 34 *************** | |
... ..(142 skipped). .. *************** | |
465 2017-12-28 17:46 34 *************** | |
466 2017-12-28 17:47 30 *********** | |
... ..(183 skipped). .. *********** | |
172 2017-12-28 20:51 30 *********** | |
173 2017-12-28 20:52 29 ********** | |
... ..( 20 skipped). .. ********** | |
194 2017-12-28 21:13 29 ********** | |
195 2017-12-28 21:14 30 *********** | |
... ..( 2 skipped). .. *********** | |
198 2017-12-28 21:17 30 *********** | |
199 2017-12-28 21:18 31 ************ | |
... ..( 3 skipped). .. ************ | |
203 2017-12-28 21:22 31 ************ | |
204 2017-12-28 21:23 32 ************* | |
... ..( 13 skipped). .. ************* | |
218 2017-12-28 21:37 32 ************* | |
219 2017-12-28 21:38 33 ************** | |
... ..( 9 skipped). .. ************** | |
229 2017-12-28 21:48 33 ************** | |
230 2017-12-28 21:49 34 *************** | |
... ..( 90 skipped). .. *************** | |
321 2017-12-28 23:20 34 *************** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP/SMART Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306939 Vendor specific | |
########## SMART status report for da11 drive (Western Digital Red: WD-WCC4EKPA0RTN) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 187 181 021 Pre-fail Always - 7641 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 131 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 067 067 000 Old_age Always - 24147 | |
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 131 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 95 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 468 | |
194 Temperature_Celsius 0x0022 120 101 000 Old_age Always - 32 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68WT0N0 | |
Serial Number: WD-WCC4EKPA0RTN | |
LU WWN Device Id: 5 0014ee 2b5af7c02 | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-2 (minor revision not indicated) | |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:22 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (53940) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 539) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x703d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 187 181 021 - 7641 | |
4 Start_Stop_Count -O--CK 100 100 000 - 131 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 067 067 000 - 24147 | |
10 Spin_Retry_Count -O--CK 100 100 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 100 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 131 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 95 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 468 | |
194 Temperature_Celsius -O---K 120 101 000 - 32 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 24142 - | |
# 2 Short offline Completed without error 00% 24079 - | |
# 3 Extended offline Completed without error 00% 23997 - | |
# 4 Short offline Completed without error 00% 23911 - | |
# 5 Extended offline Completed without error 00% 23725 - | |
# 6 Short offline Completed without error 00% 23644 - | |
# 7 Short offline Completed without error 00% 23428 - | |
# 8 Extended offline Completed without error 00% 23342 - | |
# 9 Short offline Completed without error 00% 23260 - | |
#10 Short offline Completed without error 00% 23092 - | |
#11 Extended offline Completed without error 00% 23007 - | |
#12 Short offline Completed without error 00% 22925 - | |
#13 Short offline Completed without error 00% 22684 - | |
#14 Extended offline Completed without error 00% 22597 - | |
#15 Short offline Completed without error 00% 22371 - | |
#16 Extended offline Completed without error 00% 22284 - | |
#17 Short offline Completed without error 00% 22203 - | |
#18 Short offline Completed without error 00% 21987 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 32 Celsius | |
Power Cycle Min/Max Temperature: 26/33 Celsius | |
Lifetime Min/Max Temperature: 20/51 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (332) | |
Index Estimated Time Temperature Celsius | |
333 2017-12-28 15:23 32 ************* | |
... ..(142 skipped). .. ************* | |
476 2017-12-28 17:46 32 ************* | |
477 2017-12-28 17:47 29 ********** | |
... ..(104 skipped). .. ********** | |
104 2017-12-28 19:32 29 ********** | |
105 2017-12-28 19:33 28 ********* | |
... ..( 96 skipped). .. ********* | |
202 2017-12-28 21:10 28 ********* | |
203 2017-12-28 21:11 29 ********** | |
... ..( 8 skipped). .. ********** | |
212 2017-12-28 21:20 29 ********** | |
213 2017-12-28 21:21 30 *********** | |
... ..( 5 skipped). .. *********** | |
219 2017-12-28 21:27 30 *********** | |
220 2017-12-28 21:28 31 ************ | |
... ..( 7 skipped). .. ************ | |
228 2017-12-28 21:36 31 ************ | |
229 2017-12-28 21:37 32 ************* | |
... ..(102 skipped). .. ************* | |
332 2017-12-28 23:20 32 ************* | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP/SMART Log 0x04) not supported | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306947 Vendor specific | |
########## SMART status report for da12 drive (Western Digital Red: WD-WCC7K4PTPK41) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 186 170 021 Pre-fail Always - 5691 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 31 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5336 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 31 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 29 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 13 | |
194 Temperature_Celsius 0x0022 121 112 000 Old_age Always - 29 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68N32N0 | |
Serial Number: WD-WCC7K4PTPK41 | |
LU WWN Device Id: 5 0014ee 2b95b021a | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Form Factor: 3.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-3 T13/2161-D revision 5 | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:23 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (43560) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 463) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x303d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 186 170 021 - 5691 | |
4 Start_Stop_Count -O--CK 100 100 000 - 31 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 093 093 000 - 5336 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 31 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 29 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 13 | |
194 Temperature_Celsius -O---K 121 112 000 - 29 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x04 GPL,SL R/O 8 Device Statistics log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log | |
0xb7 GPL,SL VS 56 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 5332 - | |
# 2 Extended offline Completed without error 00% 5319 - | |
# 3 Short offline Completed without error 00% 5307 - | |
# 4 Short offline Completed without error 00% 703 - | |
# 5 Extended offline Completed without error 00% 615 - | |
# 6 Short offline Completed without error 00% 536 - | |
# 7 Short offline Completed without error 00% 295 - | |
# 8 Extended offline Completed without error 00% 202 - | |
# 9 Extended offline Completed without error 00% 8 - | |
#10 Conveyance offline Completed without error 00% 0 - | |
#11 Short offline Completed without error 00% 0 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 29 Celsius | |
Power Cycle Min/Max Temperature: 23/30 Celsius | |
Lifetime Min/Max Temperature: 21/38 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/65 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (286) | |
Index Estimated Time Temperature Celsius | |
287 2017-12-28 15:23 29 ********** | |
... ..( 18 skipped). .. ********** | |
306 2017-12-28 15:42 29 ********** | |
307 2017-12-28 15:43 30 *********** | |
... ..( 8 skipped). .. *********** | |
316 2017-12-28 15:52 30 *********** | |
317 2017-12-28 15:53 29 ********** | |
... ..(168 skipped). .. ********** | |
8 2017-12-28 18:42 29 ********** | |
9 2017-12-28 18:43 26 ******* | |
... ..( 78 skipped). .. ******* | |
88 2017-12-28 20:02 26 ******* | |
89 2017-12-28 20:03 25 ****** | |
... ..(121 skipped). .. ****** | |
211 2017-12-28 22:05 25 ****** | |
212 2017-12-28 22:06 26 ******* | |
... ..( 4 skipped). .. ******* | |
217 2017-12-28 22:11 26 ******* | |
218 2017-12-28 22:12 27 ******** | |
... ..( 6 skipped). .. ******** | |
225 2017-12-28 22:19 27 ******** | |
226 2017-12-28 22:20 28 ********* | |
... ..( 9 skipped). .. ********* | |
236 2017-12-28 22:30 28 ********* | |
237 2017-12-28 22:31 29 ********** | |
... ..( 48 skipped). .. ********** | |
286 2017-12-28 23:20 29 ********** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP Log 0x04) | |
Page Offset Size Value Flags Description | |
0x01 ===== = = === == General Statistics (rev 1) == | |
0x01 0x008 4 31 --- Lifetime Power-On Resets | |
0x01 0x010 4 5336 --- Power-on Hours | |
0x01 0x018 6 82975889968 --- Logical Sectors Written | |
0x01 0x020 6 455605218 --- Number of Write Commands | |
0x01 0x028 6 84252812785 --- Logical Sectors Read | |
0x01 0x030 6 436560258 --- Number of Read Commands | |
0x01 0x038 6 2029730816 --- Date and Time TimeStamp | |
0x03 ===== = = === == Rotating Media Statistics (rev 1) == | |
0x03 0x008 4 5316 --- Spindle Motor Power-on Hours | |
0x03 0x010 4 5242 --- Head Flying Hours | |
0x03 0x018 4 43 --- Head Load Events | |
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | |
0x03 0x028 4 0 --- Read Recovery Attempts | |
0x03 0x030 4 0 --- Number of Mechanical Start Failures | |
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors | |
0x03 0x040 4 29 --- Number of High Priority Unload Events | |
0x04 ===== = = === == General Errors Statistics (rev 1) == | |
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | |
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | |
0x05 ===== = = === == Temperature Statistics (rev 1) == | |
0x05 0x008 1 29 --- Current Temperature | |
0x05 0x010 1 27 --- Average Short Term Temperature | |
0x05 0x018 1 26 --- Average Long Term Temperature | |
0x05 0x020 1 38 --- Highest Temperature | |
0x05 0x028 1 21 --- Lowest Temperature | |
0x05 0x030 1 36 --- Highest Average Short Term Temperature | |
0x05 0x038 1 23 --- Lowest Average Short Term Temperature | |
0x05 0x040 1 31 --- Highest Average Long Term Temperature | |
0x05 0x048 1 26 --- Lowest Average Long Term Temperature | |
0x05 0x050 4 0 --- Time in Over-Temperature | |
0x05 0x058 1 65 --- Specified Maximum Operating Temperature | |
0x05 0x060 4 0 --- Time in Under-Temperature | |
0x05 0x068 1 0 --- Specified Minimum Operating Temperature | |
0x06 ===== = = === == Transport Statistics (rev 1) == | |
0x06 0x008 4 49 --- Number of Hardware Resets | |
0x06 0x010 4 0 --- Number of ASR Events | |
0x06 0x018 4 0 --- Number of Interface CRC Errors | |
|||_ C monitored condition met | |
||__ D supports DSN | |
|___ N normalized value | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306844 Vendor specific | |
########## SMART status report for da13 drive (Western Digital Red: WD-WCC7K3NXPR3N) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 186 168 021 Pre-fail Always - 5666 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 31 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5337 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 31 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 29 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 12 | |
194 Temperature_Celsius 0x0022 118 107 000 Old_age Always - 32 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68N32N0 | |
Serial Number: WD-WCC7K3NXPR3N | |
LU WWN Device Id: 5 0014ee 264055199 | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Form Factor: 3.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-3 T13/2161-D revision 5 | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:23 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (44700) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 474) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x303d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 186 168 021 - 5666 | |
4 Start_Stop_Count -O--CK 100 100 000 - 31 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 093 093 000 - 5337 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 31 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 29 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 12 | |
194 Temperature_Celsius -O---K 118 107 000 - 32 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x04 GPL,SL R/O 8 Device Statistics log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log | |
0xb7 GPL,SL VS 56 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 5332 - | |
# 2 Extended offline Completed without error 00% 5319 - | |
# 3 Short offline Completed without error 00% 5307 - | |
# 4 Short offline Completed without error 00% 703 - | |
# 5 Extended offline Completed without error 00% 615 - | |
# 6 Short offline Completed without error 00% 536 - | |
# 7 Short offline Completed without error 00% 295 - | |
# 8 Extended offline Completed without error 00% 202 - | |
# 9 Extended offline Completed without error 00% 8 - | |
#10 Conveyance offline Completed without error 00% 0 - | |
#11 Short offline Completed without error 00% 0 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 32 Celsius | |
Power Cycle Min/Max Temperature: 25/32 Celsius | |
Lifetime Min/Max Temperature: 21/43 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/65 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (283) | |
Index Estimated Time Temperature Celsius | |
284 2017-12-28 15:23 32 ************* | |
... ..(198 skipped). .. ************* | |
5 2017-12-28 18:42 32 ************* | |
6 2017-12-28 18:43 28 ********* | |
... ..(173 skipped). .. ********* | |
180 2017-12-28 21:37 28 ********* | |
181 2017-12-28 21:38 27 ******** | |
... ..( 26 skipped). .. ******** | |
208 2017-12-28 22:05 27 ******** | |
209 2017-12-28 22:06 28 ********* | |
... ..( 4 skipped). .. ********* | |
214 2017-12-28 22:11 28 ********* | |
215 2017-12-28 22:12 29 ********** | |
... ..( 6 skipped). .. ********** | |
222 2017-12-28 22:19 29 ********** | |
223 2017-12-28 22:20 30 *********** | |
... ..( 8 skipped). .. *********** | |
232 2017-12-28 22:29 30 *********** | |
233 2017-12-28 22:30 31 ************ | |
... ..( 10 skipped). .. ************ | |
244 2017-12-28 22:41 31 ************ | |
245 2017-12-28 22:42 32 ************* | |
... ..( 37 skipped). .. ************* | |
283 2017-12-28 23:20 32 ************* | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP Log 0x04) | |
Page Offset Size Value Flags Description | |
0x01 ===== = = === == General Statistics (rev 1) == | |
0x01 0x008 4 31 --- Lifetime Power-On Resets | |
0x01 0x010 4 5337 --- Power-on Hours | |
0x01 0x018 6 82370390240 --- Logical Sectors Written | |
0x01 0x020 6 452643644 --- Number of Write Commands | |
0x01 0x028 6 83379312380 --- Logical Sectors Read | |
0x01 0x030 6 430051785 --- Number of Read Commands | |
0x01 0x038 6 2033330816 --- Date and Time TimeStamp | |
0x03 ===== = = === == Rotating Media Statistics (rev 1) == | |
0x03 0x008 4 5316 --- Spindle Motor Power-on Hours | |
0x03 0x010 4 5244 --- Head Flying Hours | |
0x03 0x018 4 42 --- Head Load Events | |
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | |
0x03 0x028 4 0 --- Read Recovery Attempts | |
0x03 0x030 4 0 --- Number of Mechanical Start Failures | |
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors | |
0x03 0x040 4 29 --- Number of High Priority Unload Events | |
0x04 ===== = = === == General Errors Statistics (rev 1) == | |
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | |
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | |
0x05 ===== = = === == Temperature Statistics (rev 1) == | |
0x05 0x008 1 32 --- Current Temperature | |
0x05 0x010 1 29 --- Average Short Term Temperature | |
0x05 0x018 1 29 --- Average Long Term Temperature | |
0x05 0x020 1 42 --- Highest Temperature | |
0x05 0x028 1 23 --- Lowest Temperature | |
0x05 0x030 1 40 --- Highest Average Short Term Temperature | |
0x05 0x038 1 26 --- Lowest Average Short Term Temperature | |
0x05 0x040 1 34 --- Highest Average Long Term Temperature | |
0x05 0x048 1 29 --- Lowest Average Long Term Temperature | |
0x05 0x050 4 0 --- Time in Over-Temperature | |
0x05 0x058 1 65 --- Specified Maximum Operating Temperature | |
0x05 0x060 4 0 --- Time in Under-Temperature | |
0x05 0x068 1 0 --- Specified Minimum Operating Temperature | |
0x06 ===== = = === == Transport Statistics (rev 1) == | |
0x06 0x008 4 50 --- Number of Hardware Resets | |
0x06 0x010 4 0 --- Number of ASR Events | |
0x06 0x018 4 0 --- Number of Interface CRC Errors | |
|||_ C monitored condition met | |
||__ D supports DSN | |
|___ N normalized value | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306831 Vendor specific | |
########## SMART status report for da14 drive (Western Digital Red: WD-WCC7K4CVDP5X) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 187 169 021 Pre-fail Always - 5633 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 31 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5337 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 31 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 29 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 13 | |
194 Temperature_Celsius 0x0022 116 105 000 Old_age Always - 34 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68N32N0 | |
Serial Number: WD-WCC7K4CVDP5X | |
LU WWN Device Id: 5 0014ee 20eafeeff | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Form Factor: 3.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-3 T13/2161-D revision 5 | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:24 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (45180) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 480) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x303d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 187 169 021 - 5633 | |
4 Start_Stop_Count -O--CK 100 100 000 - 31 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 093 093 000 - 5337 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 31 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 29 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 13 | |
194 Temperature_Celsius -O---K 116 105 000 - 34 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x04 GPL,SL R/O 8 Device Statistics log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log | |
0xb7 GPL,SL VS 56 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 5332 - | |
# 2 Extended offline Completed without error 00% 5319 - | |
# 3 Short offline Completed without error 00% 5307 - | |
# 4 Short offline Completed without error 00% 703 - | |
# 5 Extended offline Completed without error 00% 615 - | |
# 6 Short offline Completed without error 00% 536 - | |
# 7 Short offline Completed without error 00% 295 - | |
# 8 Extended offline Completed without error 00% 202 - | |
# 9 Extended offline Completed without error 00% 8 - | |
#10 Conveyance offline Completed without error 00% 0 - | |
#11 Short offline Completed without error 00% 0 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 34 Celsius | |
Power Cycle Min/Max Temperature: 25/35 Celsius | |
Lifetime Min/Max Temperature: 21/45 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/65 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (291) | |
Index Estimated Time Temperature Celsius | |
292 2017-12-28 15:23 34 *************** | |
... ..(198 skipped). .. *************** | |
13 2017-12-28 18:42 34 *************** | |
14 2017-12-28 18:43 29 ********** | |
... ..(205 skipped). .. ********** | |
220 2017-12-28 22:09 29 ********** | |
221 2017-12-28 22:10 30 *********** | |
... ..( 3 skipped). .. *********** | |
225 2017-12-28 22:14 30 *********** | |
226 2017-12-28 22:15 31 ************ | |
... ..( 7 skipped). .. ************ | |
234 2017-12-28 22:23 31 ************ | |
235 2017-12-28 22:24 32 ************* | |
... ..( 8 skipped). .. ************* | |
244 2017-12-28 22:33 32 ************* | |
245 2017-12-28 22:34 33 ************** | |
... ..( 11 skipped). .. ************** | |
257 2017-12-28 22:46 33 ************** | |
258 2017-12-28 22:47 34 *************** | |
... ..( 32 skipped). .. *************** | |
291 2017-12-28 23:20 34 *************** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP Log 0x04) | |
Page Offset Size Value Flags Description | |
0x01 ===== = = === == General Statistics (rev 1) == | |
0x01 0x008 4 31 --- Lifetime Power-On Resets | |
0x01 0x010 4 5337 --- Power-on Hours | |
0x01 0x018 6 82123307984 --- Logical Sectors Written | |
0x01 0x020 6 452084155 --- Number of Write Commands | |
0x01 0x028 6 83061059342 --- Logical Sectors Read | |
0x01 0x030 6 428675179 --- Number of Read Commands | |
0x01 0x038 6 2033330816 --- Date and Time TimeStamp | |
0x03 ===== = = === == Rotating Media Statistics (rev 1) == | |
0x03 0x008 4 5316 --- Spindle Motor Power-on Hours | |
0x03 0x010 4 5246 --- Head Flying Hours | |
0x03 0x018 4 43 --- Head Load Events | |
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | |
0x03 0x028 4 3 --- Read Recovery Attempts | |
0x03 0x030 4 0 --- Number of Mechanical Start Failures | |
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors | |
0x03 0x040 4 29 --- Number of High Priority Unload Events | |
0x04 ===== = = === == General Errors Statistics (rev 1) == | |
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | |
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | |
0x05 ===== = = === == Temperature Statistics (rev 1) == | |
0x05 0x008 1 34 --- Current Temperature | |
0x05 0x010 1 31 --- Average Short Term Temperature | |
0x05 0x018 1 30 --- Average Long Term Temperature | |
0x05 0x020 1 45 --- Highest Temperature | |
0x05 0x028 1 25 --- Lowest Temperature | |
0x05 0x030 1 43 --- Highest Average Short Term Temperature | |
0x05 0x038 1 27 --- Lowest Average Short Term Temperature | |
0x05 0x040 1 35 --- Highest Average Long Term Temperature | |
0x05 0x048 1 30 --- Lowest Average Long Term Temperature | |
0x05 0x050 4 0 --- Time in Over-Temperature | |
0x05 0x058 1 65 --- Specified Maximum Operating Temperature | |
0x05 0x060 4 0 --- Time in Under-Temperature | |
0x05 0x068 1 0 --- Specified Minimum Operating Temperature | |
0x06 ===== = = === == Transport Statistics (rev 1) == | |
0x06 0x008 4 49 --- Number of Hardware Resets | |
0x06 0x010 4 0 --- Number of ASR Events | |
0x06 0x018 4 0 --- Number of Interface CRC Errors | |
|||_ C monitored condition met | |
||__ D supports DSN | |
|___ N normalized value | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306836 Vendor specific | |
########## SMART status report for da15 drive (Western Digital Red: WD-WCC7K3NXPX9V) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 185 166 021 Pre-fail Always - 5708 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 31 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5336 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 31 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 29 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 13 | |
194 Temperature_Celsius 0x0022 116 103 000 Old_age Always - 34 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68N32N0 | |
Serial Number: WD-WCC7K3NXPX9V | |
LU WWN Device Id: 5 0014ee 264054a40 | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Form Factor: 3.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-3 T13/2161-D revision 5 | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:24 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (46260) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 490) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x303d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 185 166 021 - 5708 | |
4 Start_Stop_Count -O--CK 100 100 000 - 31 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 093 093 000 - 5336 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 31 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 29 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 13 | |
194 Temperature_Celsius -O---K 116 103 000 - 34 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x04 GPL,SL R/O 8 Device Statistics log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log | |
0xb7 GPL,SL VS 56 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 5332 - | |
# 2 Extended offline Completed without error 00% 5319 - | |
# 3 Short offline Completed without error 00% 5307 - | |
# 4 Short offline Completed without error 00% 703 - | |
# 5 Extended offline Completed without error 00% 615 - | |
# 6 Short offline Completed without error 00% 535 - | |
# 7 Short offline Completed without error 00% 295 - | |
# 8 Extended offline Completed without error 00% 203 - | |
# 9 Extended offline Completed without error 00% 8 - | |
#10 Conveyance offline Completed without error 00% 0 - | |
#11 Short offline Completed without error 00% 0 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 34 Celsius | |
Power Cycle Min/Max Temperature: 25/36 Celsius | |
Lifetime Min/Max Temperature: 21/47 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/65 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (283) | |
Index Estimated Time Temperature Celsius | |
284 2017-12-28 15:23 35 **************** | |
... ..(124 skipped). .. **************** | |
409 2017-12-28 17:28 35 **************** | |
410 2017-12-28 17:29 34 *************** | |
... ..( 72 skipped). .. *************** | |
5 2017-12-28 18:42 34 *************** | |
6 2017-12-28 18:43 30 *********** | |
... ..(208 skipped). .. *********** | |
215 2017-12-28 22:12 30 *********** | |
216 2017-12-28 22:13 31 ************ | |
... ..( 5 skipped). .. ************ | |
222 2017-12-28 22:19 31 ************ | |
223 2017-12-28 22:20 32 ************* | |
... ..( 8 skipped). .. ************* | |
232 2017-12-28 22:29 32 ************* | |
233 2017-12-28 22:30 33 ************** | |
... ..( 11 skipped). .. ************** | |
245 2017-12-28 22:42 33 ************** | |
246 2017-12-28 22:43 34 *************** | |
... ..( 33 skipped). .. *************** | |
280 2017-12-28 23:17 34 *************** | |
281 2017-12-28 23:18 35 **************** | |
282 2017-12-28 23:19 35 **************** | |
283 2017-12-28 23:20 35 **************** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP Log 0x04) | |
Page Offset Size Value Flags Description | |
0x01 ===== = = === == General Statistics (rev 1) == | |
0x01 0x008 4 31 --- Lifetime Power-On Resets | |
0x01 0x010 4 5336 --- Power-on Hours | |
0x01 0x018 6 81417813624 --- Logical Sectors Written | |
0x01 0x020 6 448363068 --- Number of Write Commands | |
0x01 0x028 6 82387324545 --- Logical Sectors Read | |
0x01 0x030 6 422727478 --- Number of Read Commands | |
0x01 0x038 6 2029730816 --- Date and Time TimeStamp | |
0x03 ===== = = === == Rotating Media Statistics (rev 1) == | |
0x03 0x008 4 5316 --- Spindle Motor Power-on Hours | |
0x03 0x010 4 5247 --- Head Flying Hours | |
0x03 0x018 4 43 --- Head Load Events | |
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | |
0x03 0x028 4 1 --- Read Recovery Attempts | |
0x03 0x030 4 0 --- Number of Mechanical Start Failures | |
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors | |
0x03 0x040 4 29 --- Number of High Priority Unload Events | |
0x04 ===== = = === == General Errors Statistics (rev 1) == | |
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | |
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | |
0x05 ===== = = === == Temperature Statistics (rev 1) == | |
0x05 0x008 1 34 --- Current Temperature | |
0x05 0x010 1 32 --- Average Short Term Temperature | |
0x05 0x018 1 31 --- Average Long Term Temperature | |
0x05 0x020 1 47 --- Highest Temperature | |
0x05 0x028 1 26 --- Lowest Temperature | |
0x05 0x030 1 44 --- Highest Average Short Term Temperature | |
0x05 0x038 1 28 --- Lowest Average Short Term Temperature | |
0x05 0x040 1 36 --- Highest Average Long Term Temperature | |
0x05 0x048 1 31 --- Lowest Average Long Term Temperature | |
0x05 0x050 4 0 --- Time in Over-Temperature | |
0x05 0x058 1 65 --- Specified Maximum Operating Temperature | |
0x05 0x060 4 0 --- Time in Under-Temperature | |
0x05 0x068 1 0 --- Specified Minimum Operating Temperature | |
0x06 ===== = = === == Transport Statistics (rev 1) == | |
0x06 0x008 4 49 --- Number of Hardware Resets | |
0x06 0x010 4 0 --- Number of ASR Events | |
0x06 0x018 4 0 --- Number of Interface CRC Errors | |
|||_ C monitored condition met | |
||__ D supports DSN | |
|___ N normalized value | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306810 Vendor specific | |
########## SMART status report for da16 drive (Western Digital Red: WD-WCC7K2EC203T) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 188 166 021 Pre-fail Always - 5600 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 31 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5337 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 31 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 29 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 13 | |
194 Temperature_Celsius 0x0022 116 103 000 Old_age Always - 34 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68N32N0 | |
Serial Number: WD-WCC7K2EC203T | |
LU WWN Device Id: 5 0014ee 20eb01ebb | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Form Factor: 3.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-3 T13/2161-D revision 5 | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:25 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (44700) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 474) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x303d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 188 166 021 - 5600 | |
4 Start_Stop_Count -O--CK 100 100 000 - 31 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 093 093 000 - 5337 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 31 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 29 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 13 | |
194 Temperature_Celsius -O---K 116 103 000 - 34 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x04 GPL,SL R/O 8 Device Statistics log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log | |
0xb7 GPL,SL VS 56 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 5332 - | |
# 2 Extended offline Completed without error 00% 5319 - | |
# 3 Short offline Completed without error 00% 5307 - | |
# 4 Short offline Completed without error 00% 703 - | |
# 5 Extended offline Completed without error 00% 615 - | |
# 6 Short offline Completed without error 00% 535 - | |
# 7 Short offline Completed without error 00% 295 - | |
# 8 Extended offline Completed without error 00% 202 - | |
# 9 Extended offline Completed without error 00% 8 - | |
#10 Conveyance offline Completed without error 00% 0 - | |
#11 Short offline Completed without error 00% 0 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 34 Celsius | |
Power Cycle Min/Max Temperature: 25/35 Celsius | |
Lifetime Min/Max Temperature: 21/47 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/65 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (297) | |
Index Estimated Time Temperature Celsius | |
298 2017-12-28 15:23 35 **************** | |
... ..(142 skipped). .. **************** | |
441 2017-12-28 17:46 35 **************** | |
442 2017-12-28 17:47 34 *************** | |
... ..( 54 skipped). .. *************** | |
19 2017-12-28 18:42 34 *************** | |
20 2017-12-28 18:43 30 *********** | |
... ..(208 skipped). .. *********** | |
229 2017-12-28 22:12 30 *********** | |
230 2017-12-28 22:13 31 ************ | |
... ..( 5 skipped). .. ************ | |
236 2017-12-28 22:19 31 ************ | |
237 2017-12-28 22:20 32 ************* | |
... ..( 8 skipped). .. ************* | |
246 2017-12-28 22:29 32 ************* | |
247 2017-12-28 22:30 33 ************** | |
... ..( 11 skipped). .. ************** | |
259 2017-12-28 22:42 33 ************** | |
260 2017-12-28 22:43 34 *************** | |
... ..( 28 skipped). .. *************** | |
289 2017-12-28 23:12 34 *************** | |
290 2017-12-28 23:13 35 **************** | |
... ..( 6 skipped). .. **************** | |
297 2017-12-28 23:20 35 **************** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP Log 0x04) | |
Page Offset Size Value Flags Description | |
0x01 ===== = = === == General Statistics (rev 1) == | |
0x01 0x008 4 31 --- Lifetime Power-On Resets | |
0x01 0x010 4 5337 --- Power-on Hours | |
0x01 0x018 6 82446645400 --- Logical Sectors Written | |
0x01 0x020 6 453644077 --- Number of Write Commands | |
0x01 0x028 6 83438760215 --- Logical Sectors Read | |
0x01 0x030 6 430229560 --- Number of Read Commands | |
0x01 0x038 6 2033330816 --- Date and Time TimeStamp | |
0x03 ===== = = === == Rotating Media Statistics (rev 1) == | |
0x03 0x008 4 5316 --- Spindle Motor Power-on Hours | |
0x03 0x010 4 5245 --- Head Flying Hours | |
0x03 0x018 4 43 --- Head Load Events | |
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | |
0x03 0x028 4 1 --- Read Recovery Attempts | |
0x03 0x030 4 0 --- Number of Mechanical Start Failures | |
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors | |
0x03 0x040 4 29 --- Number of High Priority Unload Events | |
0x04 ===== = = === == General Errors Statistics (rev 1) == | |
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | |
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | |
0x05 ===== = = === == Temperature Statistics (rev 1) == | |
0x05 0x008 1 34 --- Current Temperature | |
0x05 0x010 1 32 --- Average Short Term Temperature | |
0x05 0x018 1 31 --- Average Long Term Temperature | |
0x05 0x020 1 46 --- Highest Temperature | |
0x05 0x028 1 26 --- Lowest Temperature | |
0x05 0x030 1 44 --- Highest Average Short Term Temperature | |
0x05 0x038 1 28 --- Lowest Average Short Term Temperature | |
0x05 0x040 1 36 --- Highest Average Long Term Temperature | |
0x05 0x048 1 31 --- Lowest Average Long Term Temperature | |
0x05 0x050 4 0 --- Time in Over-Temperature | |
0x05 0x058 1 65 --- Specified Maximum Operating Temperature | |
0x05 0x060 4 0 --- Time in Under-Temperature | |
0x05 0x068 1 0 --- Specified Minimum Operating Temperature | |
0x06 ===== = = === == Transport Statistics (rev 1) == | |
0x06 0x008 4 49 --- Number of Hardware Resets | |
0x06 0x010 4 0 --- Number of ASR Events | |
0x06 0x018 4 0 --- Number of Interface CRC Errors | |
|||_ C monitored condition met | |
||__ D supports DSN | |
|___ N normalized value | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306849 Vendor specific | |
########## SMART status report for da17 drive (Western Digital Red: WD-WCC7K2EC2VHV) ########## | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
SMART overall-health self-assessment test result: PASSED | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0027 189 171 021 Pre-fail Always - 5533 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 31 | |
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5337 | |
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 31 | |
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 29 | |
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 13 | |
194 Temperature_Celsius 0x0022 115 105 000 Old_age Always - 35 | |
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
No Errors Logged | |
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.1-STABLE amd64] (local build) | |
=== START OF INFORMATION SECTION === | |
Model Family: Western Digital Red | |
Device Model: WDC WD40EFRX-68N32N0 | |
Serial Number: WD-WCC7K2EC2VHV | |
LU WWN Device Id: 5 0014ee 26405588a | |
Firmware Version: 82.00A82 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 5400 rpm | |
Form Factor: 3.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-3 T13/2161-D revision 5 | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 28 23:20:25 2017 EST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 244) Self-test routine in progress... | |
40% of test remaining. | |
Total time to complete Offline | |
data collection: (44880) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 477) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x303d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 189 171 021 - 5533 | |
4 Start_Stop_Count -O--CK 100 100 000 - 31 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 093 093 000 - 5337 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 31 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 29 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 13 | |
194 Temperature_Celsius -O---K 115 105 000 - 35 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 100 253 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 6 Ext. Comprehensive SMART error log | |
0x04 GPL,SL R/O 8 Device Statistics log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x09 SL R/W 1 Selective self-test log | |
0x10 GPL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log | |
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log | |
0xb7 GPL,SL VS 56 Device vendor specific log | |
0xbd GPL,SL VS 1 Device vendor specific log | |
0xc0 GPL,SL VS 1 Device vendor specific log | |
0xc1 GPL VS 93 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 5332 - | |
# 2 Extended offline Completed without error 00% 5319 - | |
# 3 Short offline Completed without error 00% 5307 - | |
# 4 Short offline Completed without error 00% 703 - | |
# 5 Extended offline Completed without error 00% 615 - | |
# 6 Short offline Completed without error 00% 536 - | |
# 7 Short offline Completed without error 00% 295 - | |
# 8 Extended offline Completed without error 00% 202 - | |
# 9 Extended offline Completed without error 00% 8 - | |
#10 Conveyance offline Completed without error 00% 0 - | |
#11 Short offline Completed without error 00% 0 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: DST executing in background (3) | |
Current Temperature: 35 Celsius | |
Power Cycle Min/Max Temperature: 25/35 Celsius | |
Lifetime Min/Max Temperature: 20/45 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/65 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (293) | |
Index Estimated Time Temperature Celsius | |
294 2017-12-28 15:23 35 **************** | |
... ..(198 skipped). .. **************** | |
15 2017-12-28 18:42 35 **************** | |
16 2017-12-28 18:43 30 *********** | |
... ..(206 skipped). .. *********** | |
223 2017-12-28 22:10 30 *********** | |
224 2017-12-28 22:11 31 ************ | |
... ..( 6 skipped). .. ************ | |
231 2017-12-28 22:18 31 ************ | |
232 2017-12-28 22:19 32 ************* | |
... ..( 8 skipped). .. ************* | |
241 2017-12-28 22:28 32 ************* | |
242 2017-12-28 22:29 33 ************** | |
... ..( 11 skipped). .. ************** | |
254 2017-12-28 22:41 33 ************** | |
255 2017-12-28 22:42 34 *************** | |
... ..( 27 skipped). .. *************** | |
283 2017-12-28 23:10 34 *************** | |
284 2017-12-28 23:11 35 **************** | |
... ..( 8 skipped). .. **************** | |
293 2017-12-28 23:20 35 **************** | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP Log 0x04) | |
Page Offset Size Value Flags Description | |
0x01 ===== = = === == General Statistics (rev 1) == | |
0x01 0x008 4 31 --- Lifetime Power-On Resets | |
0x01 0x010 4 5337 --- Power-on Hours | |
0x01 0x018 6 82291987040 --- Logical Sectors Written | |
0x01 0x020 6 452734005 --- Number of Write Commands | |
0x01 0x028 6 83222792422 --- Logical Sectors Read | |
0x01 0x030 6 429688895 --- Number of Read Commands | |
0x01 0x038 6 2033330816 --- Date and Time TimeStamp | |
0x03 ===== = = === == Rotating Media Statistics (rev 1) == | |
0x03 0x008 4 5316 --- Spindle Motor Power-on Hours | |
0x03 0x010 4 5245 --- Head Flying Hours | |
0x03 0x018 4 43 --- Head Load Events | |
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | |
0x03 0x028 4 1 --- Read Recovery Attempts | |
0x03 0x030 4 0 --- Number of Mechanical Start Failures | |
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors | |
0x03 0x040 4 29 --- Number of High Priority Unload Events | |
0x04 ===== = = === == General Errors Statistics (rev 1) == | |
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | |
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | |
0x05 ===== = = === == Temperature Statistics (rev 1) == | |
0x05 0x008 1 35 --- Current Temperature | |
0x05 0x010 1 32 --- Average Short Term Temperature | |
0x05 0x018 1 31 --- Average Long Term Temperature | |
0x05 0x020 1 45 --- Highest Temperature | |
0x05 0x028 1 26 --- Lowest Temperature | |
0x05 0x030 1 43 --- Highest Average Short Term Temperature | |
0x05 0x038 1 28 --- Lowest Average Short Term Temperature | |
0x05 0x040 1 36 --- Highest Average Long Term Temperature | |
0x05 0x048 1 31 --- Lowest Average Long Term Temperature | |
0x05 0x050 4 0 --- Time in Over-Temperature | |
0x05 0x058 1 65 --- Specified Maximum Operating Temperature | |
0x05 0x060 4 0 --- Time in Under-Temperature | |
0x05 0x068 1 0 --- Specified Minimum Operating Temperature | |
0x06 ===== = = === == Transport Statistics (rev 1) == | |
0x06 0x008 4 49 --- Number of Hardware Resets | |
0x06 0x010 4 0 --- Number of ASR Events | |
0x06 0x018 4 0 --- Number of Interface CRC Errors | |
|||_ C monitored condition met | |
||__ D supports DSN | |
|___ N normalized value | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0008 2 0 Device-to-host non-data FIS retries | |
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC | |
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x8000 4 1306843 Vendor specific |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment