FreeBSD11-dmesg-NUC5I3RYH

Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p1 #0 r306420: Thu Sep 29 01:43:23 UTC 2016
    root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT(efifb): resolution 800x600
CPU: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (2095.20-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306d4  Family=0x6  Model=0x3d  Stepping=4
  Features=0xbfebfbff
  Features2=0x7ffafbbf
  AMD Features=0x2c100800
  AMD Features2=0x121
  Structured Extended Features=0x21c27ab
  XSAVE Features=0x1
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8123432960 (7747 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: 
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
ioapic0  irqs 0-39 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8101c950, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
cryptosoft0:  on motherboard
acpi0:  on motherboard
acpi0: Power Button (fixed)
cpu0:  on acpi0
cpu1:  on acpi0
cpu2:  on acpi0
cpu3:  on acpi0
hpet0:  iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0:  port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0:  port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0:  port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x4
pci0:  on pcib0
vgapci0:  port 0x2000-0x203f mem 0xa9000000-0xa9ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0:  mem 0xaa134000-0xaa137fff irq 16 at device 3.0 on pci0
xhci0:  mem 0xaa120000-0xaa12ffff irq 21 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0:  at device 22.0 (no driver attached)
em0:  port 0x2080-0x209f mem 0xaa100000-0xaa11ffff,0xaa13b000-0xaa13bfff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: f4:4d:30:62:75:81
em0: netmap queues/slots: TX 1/1024, RX 1/1024
hdac1:  mem 0xaa130000-0xaa133fff irq 22 at device 27.0 on pci0
pcib1:  irq 16 at device 28.0 on pci0
pci1:  on pcib1
pcib2:  irq 19 at device 28.3 on pci0
pci2:  on pcib2
pci2:  at device 0.0 (no driver attached)
ehci0:  mem 0xaa13a000-0xaa13a3ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
isab0:  at device 31.0 on pci0
isa0:  on isab0
ahci0:  port 0x20d0-0x20d7,0x20c0-0x20c3,0x20b0-0x20b7,0x20a0-0x20a3,0x2060-0x207f mem 0xaa139000-0xaa1397ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich3:  at channel 3 on ahci0
acpi_button0:  on acpi0
acpi_button1:  on acpi0
acpi_tz0:  on acpi0
acpi_tz1:  on acpi0
orm0:  at iomem 0xd0000-0xd0fff on isa0
atkbdc0:  at port 0x60,0x64 on isa0
atkbd0:  irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0:  on cpu0
est1:  on cpu1
est2:  on cpu2
est3:  on cpu3
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0:  at cad 0 on hdac0
hdaa0:  at nid 1 on hdacc0
pcm0:  at nid 3 on hdaa0
hdacc1:  at cad 0 on hdac1
hdaa1:  at nid 1 on hdacc1
pcm1:  at nid 33 and 25 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1:  at usbus1
uhub1:  on usbus1
ada0 at ahcich3 bus 0 scbus0 target 0 lun 0
ada0:  ACS-2 ATA SATA 3.x device
ada0: Serial Number S24ANX0H808430T
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 2095202252 Hz quality 1000
Trying to mount root from ufs:/dev/ada0p2 [rw]...