Created
October 27, 2022 13:32
-
-
Save musashino205/0db98d9f99fbacc8a311f65739b72eb7 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
U-Boot 2011.12.46351-1.00.09-svn5722 (Mar 12 2015 - 20:08:54) | |
Board: RTL839x CPU:700MHz LXB:200MHz MEM:400MHz | |
DRAM: 128 MB | |
SPI-F: 1x32 MB | |
Loading 65536B env. variables from offset 0x80000 | |
#### Periphery Devices Init Successfully #### | |
Switch Model: RTL8393M_8218B_8218FB_2SFP (Port Count: 48) | |
Switch Chip: RTL8393M | |
Model Info: 83936802 | |
### RTL8218B config - MAC ID = 0 ### | |
### RTL8218B config - MAC ID = 8 ### | |
### RTL8218B config - MAC ID = 16 ### | |
### RTL8218B config - MAC ID = 24 ### | |
### RTL8218B config - MAC ID = 32 ### | |
### RTL8218FB config - MAC ID = 40 ### | |
PHY[0]: disable EEE | |
PHY[1]: disable EEE | |
PHY[2]: disable EEE | |
PHY[3]: disable EEE | |
PHY[4]: disable EEE | |
PHY[5]: disable EEE | |
RTL839x# # rtk network on | |
Enable network | |
Please wait for PHY init-time ... | |
RTL839x# # tftp 0x81000000 | |
*** Warning: no boot file name; using '0101A8C0.img' | |
Using rtl8390#0 device | |
TFTP from server 192.168.1.111; our IP address is 192.168.1.1 | |
Filename '0101A8C0.img'. | |
Load address: 0x81000000 | |
Loading: ################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
######################### | |
done | |
Bytes transferred = 7041775 (6b72ef hex) | |
RTL839x# # bootm | |
## Booting kernel from Legacy Image at 81000000 ... | |
Image Name: MIPS OpenWrt Linux-5.10.149 | |
Created: 2022-10-26 7:59:38 UTC | |
Image Type: MIPS Linux Kernel Image (gzip compressed) | |
Data Size: 7041711 Bytes = 6.7 MB | |
Load Address: 80000000 | |
Entry Point: 80000400 | |
Verifying Checksum ... OK | |
Uncompressing Kernel Image ... OK | |
Starting kernel ... | |
[ 0.000000] Linux version 5.10.149 (musashino205@TAIHA.NET) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r20877+8-7d6032f310) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Wed Oct 26 07:59:38 2022 | |
[ 0.000000] RTL838X model is ffffffff | |
[ 0.000000] RTL839X model is 83936802 | |
[ 0.000000] SoC Type: RTL8393 | |
[ 0.000000] printk: bootconsole [early0] enabled | |
[ 0.000000] CPU0 revision is: 00019555 (MIPS 34Kc) | |
[ 0.000000] MIPS: machine is Panasonic Switch-M48eG PN28480K | |
[ 0.000000] Initrd not found or empty - disabling initrd | |
[ 0.000000] Using appended Device Tree. | |
[ 0.000000] Detected 1 available secondary CPU(s) | |
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. | |
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes | |
[ 0.000000] Zone ranges: | |
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] | |
[ 0.000000] On node 0 totalpages: 32768 | |
[ 0.000000] Normal zone: 288 pages used for memmap | |
[ 0.000000] Normal zone: 0 pages reserved | |
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7 | |
[ 0.000000] percpu: Embedded 14 pages/cpu s26864 r8192 d22288 u57344 | |
[ 0.000000] pcpu-alloc: s26864 r8192 d22288 u57344 alloc=14*4096 | |
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 | |
[ 0.000000] Kernel command line: console=ttyS0,9600 | |
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) | |
[ 0.000000] Writing ErrCtl register=0005dda6 | |
[ 0.000000] Readback ErrCtl register=0005dda6 | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 112248K/131072K available (6177K kernel code, 613K rwdata, 1296K rodata, 9056K init, 206K bss, 18824K reserved, 0K cma-reserved) | |
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] rcu: Hierarchical RCU implementation. | |
[ 0.000000] Tracing variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
[ 0.000000] NR_IRQS: 256 | |
[ 0.000000] rtl83xx-clk: initialized, CPU 700 MHz, MEM 400 MHz (8 Bit DDR3), LXB 200 MHz | |
[ 0.000000] clocksource: realtek_otto_timer: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 38225208801 ns | |
[ 0.000000] sched_clock: 28 bits at 3125kHz, resolution 320ns, wraps every 42949672800ns | |
[ 0.000000] Calibrating delay loop... 464.48 BogoMIPS (lpj=2322432) | |
[ 0.000000] pid_max: default: 32768 minimum: 301 | |
[ 0.000000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
[ 0.000000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
[ 0.000000] rcu: Hierarchical SRCU implementation. | |
[ 0.000000] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build | |
[ 0.000000] smp: Bringing up secondary CPUs ... | |
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. | |
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes | |
[ 0.000000] CPU1 revision is: 00019555 (MIPS 34Kc) | |
[ 0.000000] Synchronize counters for CPU 1: done. | |
[ 0.000000] smp: Brought up 1 node, 2 CPUs | |
[ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.000000] futex hash table entries: 512 (order: 2, 16384 bytes, linear) | |
[ 0.000000] pinctrl core: initialized pinctrl subsystem | |
[ 0.000000] NET: Registered protocol family 16 | |
[ 0.000000] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.000000] rtl83xx-clk clock-controller: rate setting enabled, CPU 400-850 MHz, MEM 400-400 MHz, LXB 200-200 MHz, OVERCLOCK AT OWN RISK | |
[ 0.000159] clocksource: Switched to clocksource realtek_otto_timer | |
[ 0.085146] NET: Registered protocol family 2 | |
[ 0.141912] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) | |
[ 0.238115] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) | |
[ 0.347260] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
[ 0.447906] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) | |
[ 0.540703] TCP: Hash tables configured (established 1024 bind 1024) | |
[ 0.624666] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) | |
[ 0.710322] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) | |
[ 0.802709] NET: Registered protocol family 1 | |
[ 1.084894] workingset: timestamp_bits=14 max_order=15 bucket_order=1 | |
[ 1.173875] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 1.249549] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
[ 1.388417] pinctrl-single 1b000004.pinmux: 32 pins, size 4 | |
[ 1.461414] pinctrl-single 1b0000e4.pinmux: 32 pins, size 4 | |
[ 1.641766] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled | |
[ 1.727000] printk: console [ttyS0] disabled | |
[ 1.782304] 18002000.uart: ttyS0 at MMIO 0x18002000 (irq = 31, base_baud = 12500000) is a 16550A | |
[ 1.897948] printk: console [ttyS0] enabled | |
[ 1.897948] printk: console [ttyS0] enabled | |
[ 2.007921] printk: bootconsole [early0] disabled | |
[ 2.007921] printk: bootconsole [early0] disabled | |
[ 2.381127] brd: module loaded | |
[ 2.427776] spi-nor spi0.0: mx25l25635e (32768 Kbytes) | |
[ 2.495606] 8 fixed-partitions partitions found on MTD device spi0.0 | |
[ 2.579419] OF: Bad cell count for /soc/spi@1200/flash@0/partitions | |
[ 2.662041] OF: Bad cell count for /soc/spi@1200/flash@0/partitions | |
[ 2.745512] Creating 8 MTD partitions on "spi0.0": | |
[ 2.808770] 0x000000000000-0x000000080000 : "u-boot" | |
[ 2.875609] 0x000000080000-0x000000090000 : "u-boot-env" | |
[ 2.947562] 0x000000090000-0x0000000a0000 : "u-boot-env2" | |
[ 3.022548] 0x0000000a0000-0x000000100000 : "sysinfo" | |
[ 3.090872] 0x000000100000-0x000000e00000 : "fs_reserved" | |
[ 3.164587] 0x000000e00000-0x000001e00000 : "firmware" | |
[ 3.234540] 2 uimage-fw partitions found on MTD device firmware | |
[ 3.312610] Creating 2 MTD partitions on "firmware": | |
[ 3.378153] 0x000000000000-0x000000360000 : "kernel" | |
[ 3.445291] 0x000000360000-0x000001000000 : "rootfs" | |
[ 3.512392] mtd: device 7 (rootfs) set to be root filesystem | |
[ 3.588419] 1 squashfs-split partitions found on MTD device rootfs | |
[ 3.670074] 0x000000690000-0x000001000000 : "rootfs_data" | |
[ 3.743731] 0x000001e00000-0x000001f00000 : "vlog_data" | |
[ 3.814906] 0x000001f00000-0x000002000000 : "elog_data" | |
[ 3.907505] RTL839X Chip-Info: a0016290, version B | |
[ 3.971193] Probing RTL838X eth device pdev: 82174600, dev: 82174610 | |
[ 4.084585] Found SoC ID: 8393: RTL8393, family 8390 | |
[ 4.150303] Using MAC 0000005040101ab6 | |
[ 6.126367] NET: Registered protocol family 10 | |
[ 6.194695] Segment Routing with IPv6 | |
[ 6.243097] NET: Registered protocol family 17 | |
[ 6.302403] 8021q: 802.1Q VLAN Support v1.8 | |
[ 6.360282] pca953x 0-0020: using no AI | |
[ 6.414485] pca953x 0-0075: using no AI | |
[ 6.468632] gpio-470 (portled-sregister-reset): hogged as output/high | |
[ 6.553936] gpio-468 (ext-switch-reset): hogged as output/high | |
[ 6.632558] i2c-gpio i2c-gpio-0: using lines 505 (SDA) and 504 (SCL) | |
[ 6.718273] i2c-gpio i2c-gpio-1: using lines 503 (SDA) and 502 (SCL) | |
[ 6.804308] RTL839X Chip-Info: a0016290, version B | |
[ 8.815158] rtl8393_serdes_probe: id: 48 | |
[ 8.866962] Realtek RTL8393 SERDES rtl838x slave mii-0:30: Detected internal RTL8390 SERDES | |
[ 9.001927] rtl8393_serdes_probe: id: 49 | |
[ 9.053706] Realtek RTL8393 SERDES rtl838x slave mii-0:31: Detected internal RTL8390 SERDES | |
[ 9.196318] rtl83xx_mdio_probe found port 0 | |
[ 9.251463] rtl83xx_mdio_probe port 0 has phandle | |
[ 9.313457] rtl83xx_mdio_probe port -1 has SDS | |
[ 9.371940] rtl83xx_mdio_probe found port 1 | |
[ 9.426966] rtl83xx_mdio_probe port 1 has phandle | |
[ 9.488884] rtl83xx_mdio_probe port -1 has SDS | |
[ 9.547376] rtl83xx_mdio_probe found port 2 | |
[ 9.602411] rtl83xx_mdio_probe port 2 has phandle | |
[ 9.664332] rtl83xx_mdio_probe port -1 has SDS | |
[ 9.722821] rtl83xx_mdio_probe found port 3 | |
[ 9.777955] rtl83xx_mdio_probe port 3 has phandle | |
[ 9.839871] rtl83xx_mdio_probe port -1 has SDS | |
[ 9.898361] rtl83xx_mdio_probe found port 4 | |
[ 9.953367] rtl83xx_mdio_probe port 4 has phandle | |
[ 10.015299] rtl83xx_mdio_probe port -1 has SDS | |
[ 10.073793] rtl83xx_mdio_probe found port 5 | |
[ 10.128826] rtl83xx_mdio_probe port 5 has phandle | |
[ 10.190731] rtl83xx_mdio_probe port -1 has SDS | |
[ 10.249222] rtl83xx_mdio_probe found port 6 | |
[ 10.304246] rtl83xx_mdio_probe port 6 has phandle | |
[ 10.366167] rtl83xx_mdio_probe port -1 has SDS | |
[ 10.424653] rtl83xx_mdio_probe found port 7 | |
[ 10.479697] rtl83xx_mdio_probe port 7 has phandle | |
[ 10.541613] rtl83xx_mdio_probe port -1 has SDS | |
[ 10.600105] rtl83xx_mdio_probe found port 8 | |
[ 10.655222] rtl83xx_mdio_probe port 8 has phandle | |
[ 10.717154] rtl83xx_mdio_probe port -1 has SDS | |
[ 10.775622] rtl83xx_mdio_probe found port 9 | |
[ 10.830664] rtl83xx_mdio_probe port 9 has phandle | |
[ 10.892580] rtl83xx_mdio_probe port -1 has SDS | |
[ 10.951069] rtl83xx_mdio_probe found port 10 | |
[ 11.007245] rtl83xx_mdio_probe port 10 has phandle | |
[ 11.070309] rtl83xx_mdio_probe port -1 has SDS | |
[ 11.128802] rtl83xx_mdio_probe found port 11 | |
[ 11.184978] rtl83xx_mdio_probe port 11 has phandle | |
[ 11.248038] rtl83xx_mdio_probe port -1 has SDS | |
[ 11.306530] rtl83xx_mdio_probe found port 12 | |
[ 11.362699] rtl83xx_mdio_probe port 12 has phandle | |
[ 11.425777] rtl83xx_mdio_probe port -1 has SDS | |
[ 11.484268] rtl83xx_mdio_probe found port 13 | |
[ 11.540444] rtl83xx_mdio_probe port 13 has phandle | |
[ 11.603510] rtl83xx_mdio_probe port -1 has SDS | |
[ 11.662001] rtl83xx_mdio_probe found port 14 | |
[ 11.718278] rtl83xx_mdio_probe port 14 has phandle | |
[ 11.781340] rtl83xx_mdio_probe port -1 has SDS | |
[ 11.839831] rtl83xx_mdio_probe found port 15 | |
[ 11.895984] rtl83xx_mdio_probe port 15 has phandle | |
[ 11.959069] rtl83xx_mdio_probe port -1 has SDS | |
[ 12.017559] rtl83xx_mdio_probe found port 16 | |
[ 12.073713] rtl83xx_mdio_probe port 16 has phandle | |
[ 12.136799] rtl83xx_mdio_probe port -1 has SDS | |
[ 12.195272] rtl83xx_mdio_probe found port 17 | |
[ 12.251462] rtl83xx_mdio_probe port 17 has phandle | |
[ 12.314519] rtl83xx_mdio_probe port -1 has SDS | |
[ 12.373008] rtl83xx_mdio_probe found port 18 | |
[ 12.429183] rtl83xx_mdio_probe port 18 has phandle | |
[ 12.492247] rtl83xx_mdio_probe port -1 has SDS | |
[ 12.550739] rtl83xx_mdio_probe found port 19 | |
[ 12.606913] rtl83xx_mdio_probe port 19 has phandle | |
[ 12.669980] rtl83xx_mdio_probe port -1 has SDS | |
[ 12.728469] rtl83xx_mdio_probe found port 20 | |
[ 12.784638] rtl83xx_mdio_probe port 20 has phandle | |
[ 12.847707] rtl83xx_mdio_probe port -1 has SDS | |
[ 12.906195] rtl83xx_mdio_probe found port 21 | |
[ 12.962367] rtl83xx_mdio_probe port 21 has phandle | |
[ 13.025444] rtl83xx_mdio_probe port -1 has SDS | |
[ 13.083934] rtl83xx_mdio_probe found port 22 | |
[ 13.140112] rtl83xx_mdio_probe port 22 has phandle | |
[ 13.203176] rtl83xx_mdio_probe port -1 has SDS | |
[ 13.261665] rtl83xx_mdio_probe found port 23 | |
[ 13.317847] rtl83xx_mdio_probe port 23 has phandle | |
[ 13.380903] rtl83xx_mdio_probe port -1 has SDS | |
[ 13.439392] rtl83xx_mdio_probe found port 24 | |
[ 13.495548] rtl83xx_mdio_probe port 24 has phandle | |
[ 13.558632] rtl83xx_mdio_probe port -1 has SDS | |
[ 13.617126] rtl83xx_mdio_probe found port 25 | |
[ 13.673380] rtl83xx_mdio_probe port 25 has phandle | |
[ 13.736467] rtl83xx_mdio_probe port -1 has SDS | |
[ 13.794932] rtl83xx_mdio_probe found port 26 | |
[ 13.851122] rtl83xx_mdio_probe port 26 has phandle | |
[ 13.914184] rtl83xx_mdio_probe port -1 has SDS | |
[ 13.972675] rtl83xx_mdio_probe found port 27 | |
[ 14.028850] rtl83xx_mdio_probe port 27 has phandle | |
[ 14.091913] rtl83xx_mdio_probe port -1 has SDS | |
[ 14.150404] rtl83xx_mdio_probe found port 28 | |
[ 14.206591] rtl83xx_mdio_probe port 28 has phandle | |
[ 14.269643] rtl83xx_mdio_probe port -1 has SDS | |
[ 14.328138] rtl83xx_mdio_probe found port 29 | |
[ 14.384312] rtl83xx_mdio_probe port 29 has phandle | |
[ 14.447372] rtl83xx_mdio_probe port -1 has SDS | |
[ 14.505858] rtl83xx_mdio_probe found port 30 | |
[ 14.562049] rtl83xx_mdio_probe port 30 has phandle | |
[ 14.625116] rtl83xx_mdio_probe port -1 has SDS | |
[ 14.683605] rtl83xx_mdio_probe found port 31 | |
[ 14.739885] rtl83xx_mdio_probe port 31 has phandle | |
[ 14.802945] rtl83xx_mdio_probe port -1 has SDS | |
[ 14.861437] rtl83xx_mdio_probe found port 32 | |
[ 14.917717] rtl83xx_mdio_probe port 32 has phandle | |
[ 14.980779] rtl83xx_mdio_probe port -1 has SDS | |
[ 15.039270] rtl83xx_mdio_probe found port 33 | |
[ 15.095423] rtl83xx_mdio_probe port 33 has phandle | |
[ 15.158507] rtl83xx_mdio_probe port -1 has SDS | |
[ 15.217000] rtl83xx_mdio_probe found port 34 | |
[ 15.273260] rtl83xx_mdio_probe port 34 has phandle | |
[ 15.336342] rtl83xx_mdio_probe port -1 has SDS | |
[ 15.394812] rtl83xx_mdio_probe found port 35 | |
[ 15.451004] rtl83xx_mdio_probe port 35 has phandle | |
[ 15.514060] rtl83xx_mdio_probe port -1 has SDS | |
[ 15.572551] rtl83xx_mdio_probe found port 36 | |
[ 15.628729] rtl83xx_mdio_probe port 36 has phandle | |
[ 15.691790] rtl83xx_mdio_probe port -1 has SDS | |
[ 15.750282] rtl83xx_mdio_probe found port 37 | |
[ 15.806456] rtl83xx_mdio_probe port 37 has phandle | |
[ 15.869518] rtl83xx_mdio_probe port -1 has SDS | |
[ 15.928011] rtl83xx_mdio_probe found port 38 | |
[ 15.984180] rtl83xx_mdio_probe port 38 has phandle | |
[ 16.047247] rtl83xx_mdio_probe port -1 has SDS | |
[ 16.105734] rtl83xx_mdio_probe found port 39 | |
[ 16.161925] rtl83xx_mdio_probe port 39 has phandle | |
[ 16.224987] rtl83xx_mdio_probe port -1 has SDS | |
[ 16.283480] rtl83xx_mdio_probe found port 40 | |
[ 16.339758] rtl83xx_mdio_probe port 40 has phandle | |
[ 16.402820] rtl83xx_mdio_probe port -1 has SDS | |
[ 16.461313] rtl83xx_mdio_probe found port 41 | |
[ 16.517598] rtl83xx_mdio_probe port 41 has phandle | |
[ 16.580653] rtl83xx_mdio_probe port -1 has SDS | |
[ 16.639147] rtl83xx_mdio_probe found port 42 | |
[ 16.695402] rtl83xx_mdio_probe port 42 has phandle | |
[ 16.758491] rtl83xx_mdio_probe port -1 has SDS | |
[ 16.816978] rtl83xx_mdio_probe found port 43 | |
[ 16.873130] rtl83xx_mdio_probe port 43 has phandle | |
[ 16.936217] rtl83xx_mdio_probe port -1 has SDS | |
[ 16.994684] rtl83xx_mdio_probe found port 44 | |
[ 17.050873] rtl83xx_mdio_probe port 44 has phandle | |
[ 17.113936] rtl83xx_mdio_probe port -1 has SDS | |
[ 17.172425] rtl83xx_mdio_probe found port 45 | |
[ 17.228603] rtl83xx_mdio_probe port 45 has phandle | |
[ 17.291667] rtl83xx_mdio_probe port -1 has SDS | |
[ 17.350155] rtl83xx_mdio_probe found port 46 | |
[ 17.406331] rtl83xx_mdio_probe port 46 has phandle | |
[ 17.469397] rtl83xx_mdio_probe port -1 has SDS | |
[ 17.527887] rtl83xx_mdio_probe found port 47 | |
[ 17.584069] rtl83xx_mdio_probe port 47 has phandle | |
[ 17.647123] rtl83xx_mdio_probe port -1 has SDS | |
[ 17.705608] rtl83xx_mdio_probe found port 52 | |
[ 17.786683] In rtl83xx_vlan_setup | |
[ 17.830312] UNKNOWN_MC_PMASK: 001fffffffffffff | |
[ 17.888868] VLAN profile 0: L2 learning: 1, UNKN L2MC FLD PMSK 511, UNKN IPMC FLD PMSK 511, UNKN IPv6MC FLD PMSK: 511 | |
[ 17.888879] VLAN profile 0: raw 000001ff, 003fe3ff | |
[ 19.186098] rtl83xx_enable_phy_polling: ffffffffffff | |
[ 20.316148] rtl83xx-switch switch@1b000000 lan1 (uninitialized): PHY [mdio-bus:00] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 20.476195] rtl83xx-switch switch@1b000000 lan2 (uninitialized): PHY [mdio-bus:01] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 20.636211] rtl83xx-switch switch@1b000000 lan3 (uninitialized): PHY [mdio-bus:02] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 20.796212] rtl83xx-switch switch@1b000000 lan4 (uninitialized): PHY [mdio-bus:03] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 20.956224] rtl83xx-switch switch@1b000000 lan5 (uninitialized): PHY [mdio-bus:04] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 21.116200] rtl83xx-switch switch@1b000000 lan6 (uninitialized): PHY [mdio-bus:05] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 21.276235] rtl83xx-switch switch@1b000000 lan7 (uninitialized): PHY [mdio-bus:06] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 21.436205] rtl83xx-switch switch@1b000000 lan8 (uninitialized): PHY [mdio-bus:07] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 21.596204] rtl83xx-switch switch@1b000000 lan9 (uninitialized): PHY [mdio-bus:08] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 21.756173] rtl83xx-switch switch@1b000000 lan10 (uninitialized): PHY [mdio-bus:09] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 21.916200] rtl83xx-switch switch@1b000000 lan11 (uninitialized): PHY [mdio-bus:0a] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 22.076272] rtl83xx-switch switch@1b000000 lan12 (uninitialized): PHY [mdio-bus:0b] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 22.236223] rtl83xx-switch switch@1b000000 lan13 (uninitialized): PHY [mdio-bus:0c] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 22.396206] rtl83xx-switch switch@1b000000 lan14 (uninitialized): PHY [mdio-bus:0d] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 22.556226] rtl83xx-switch switch@1b000000 lan15 (uninitialized): PHY [mdio-bus:0e] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 22.716186] rtl83xx-switch switch@1b000000 lan16 (uninitialized): PHY [mdio-bus:0f] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 22.876258] rtl83xx-switch switch@1b000000 lan17 (uninitialized): PHY [mdio-bus:10] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 23.036210] rtl83xx-switch switch@1b000000 lan18 (uninitialized): PHY [mdio-bus:11] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 23.196204] rtl83xx-switch switch@1b000000 lan19 (uninitialized): PHY [mdio-bus:12] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 23.356182] rtl83xx-switch switch@1b000000 lan20 (uninitialized): PHY [mdio-bus:13] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 23.516196] rtl83xx-switch switch@1b000000 lan21 (uninitialized): PHY [mdio-bus:14] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 23.676234] rtl83xx-switch switch@1b000000 lan22 (uninitialized): PHY [mdio-bus:15] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 23.836203] rtl83xx-switch switch@1b000000 lan23 (uninitialized): PHY [mdio-bus:16] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 23.996184] rtl83xx-switch switch@1b000000 lan24 (uninitialized): PHY [mdio-bus:17] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 24.156217] rtl83xx-switch switch@1b000000 lan25 (uninitialized): PHY [mdio-bus:18] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 24.316204] rtl83xx-switch switch@1b000000 lan26 (uninitialized): PHY [mdio-bus:19] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 24.476205] rtl83xx-switch switch@1b000000 lan27 (uninitialized): PHY [mdio-bus:1a] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 24.636183] rtl83xx-switch switch@1b000000 lan28 (uninitialized): PHY [mdio-bus:1b] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 24.796216] rtl83xx-switch switch@1b000000 lan29 (uninitialized): PHY [mdio-bus:1c] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 24.956200] rtl83xx-switch switch@1b000000 lan30 (uninitialized): PHY [mdio-bus:1d] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 25.116201] rtl83xx-switch switch@1b000000 lan31 (uninitialized): PHY [mdio-bus:1e] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 25.276190] rtl83xx-switch switch@1b000000 lan32 (uninitialized): PHY [mdio-bus:1f] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 25.436216] rtl83xx-switch switch@1b000000 lan33 (uninitialized): PHY [mdio-bus:20] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 25.596234] rtl83xx-switch switch@1b000000 lan34 (uninitialized): PHY [mdio-bus:21] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 25.756204] rtl83xx-switch switch@1b000000 lan35 (uninitialized): PHY [mdio-bus:22] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 25.916183] rtl83xx-switch switch@1b000000 lan36 (uninitialized): PHY [mdio-bus:23] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 26.076215] rtl83xx-switch switch@1b000000 lan37 (uninitialized): PHY [mdio-bus:24] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 26.236204] rtl83xx-switch switch@1b000000 lan38 (uninitialized): PHY [mdio-bus:25] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 26.396217] rtl83xx-switch switch@1b000000 lan39 (uninitialized): PHY [mdio-bus:26] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 26.556181] rtl83xx-switch switch@1b000000 lan40 (uninitialized): PHY [mdio-bus:27] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 26.716298] rtl83xx-switch switch@1b000000 lan41 (uninitialized): PHY [mdio-bus:28] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 26.876200] rtl83xx-switch switch@1b000000 lan42 (uninitialized): PHY [mdio-bus:29] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 27.036219] rtl83xx-switch switch@1b000000 lan43 (uninitialized): PHY [mdio-bus:2a] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 27.196224] rtl83xx-switch switch@1b000000 lan44 (uninitialized): PHY [mdio-bus:2b] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 27.356181] rtl83xx-switch switch@1b000000 lan45 (uninitialized): PHY [mdio-bus:2c] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 27.516223] rtl83xx-switch switch@1b000000 lan46 (uninitialized): PHY [mdio-bus:2d] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 27.676225] rtl83xx-switch switch@1b000000 lan47 (uninitialized): PHY [mdio-bus:2e] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 27.836182] rtl83xx-switch switch@1b000000 lan48 (uninitialized): PHY [mdio-bus:2f] driver [Realtek RTL8218B (external)] (irq=POLL) | |
[ 27.993640] rtl83xx-switch switch@1b000000: configuring for fixed/internal link mode | |
[ 28.096976] DSA: tree 0 setup | |
[ 28.136295] LINK state irq: 20 | |
[ 28.176659] In rtl83xx_setup_qos | |
[ 28.219142] Setting up RTL839X QoS | |
[ 28.263862] RTL839X_PRI_SEL_TBL_CTRL(i): 01112111 | |
[ 28.325778] Current Intprio2queue setting: 00000000 | |
[ 28.389982] QM_PKT2CPU_INTPRI_MAP: 00fac688 | |
[ 28.445182] rtl838x_dbgfs_init called | |
[ 28.563733] Freeing unused kernel memory: 9056K | |
[ 28.623408] This architecture does not have kernel memory protection. | |
[ 28.708357] Run /init as init process | |
[ 28.756495] with arguments: | |
[ 28.795486] /init | |
[ 28.825291] with environment: | |
[ 28.866577] HOME=/ | |
[ 28.897531] TERM=linux | |
[ 28.933284] rtl83xx-switch switch@1b000000: Link is Up - 1Gbps/Full - flow control off | |
[ 29.037828] rtl83xx_fib_event_work_do: FIB4 default rule failed | |
[ 29.746883] init: Console is alive | |
[ 29.792163] init: - watchdog - | |
[ 29.858150] kmodloader: loading kernel modules from /etc/modules-boot.d/* | |
[ 29.954445] kmodloader: done loading kernel modules from /etc/modules-boot.d/* | |
[ 30.066648] init: - preinit - | |
[ 30.392962] random: jshn: uninitialized urandom read (4 bytes read) | |
[ 30.582680] random: jshn: uninitialized urandom read (4 bytes read) | |
[ 32.662367] random: jshn: uninitialized urandom read (4 bytes read) | |
[ 32.818846] random: jshn: uninitialized urandom read (4 bytes read) | |
[ 33.217833] random: jshn: uninitialized urandom read (4 bytes read) | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
sh: out of range | |
[ 34.879656] RESETTING 8390, CPU_PORT 52 | |
[ 35.130256] rtl838x-eth 1b00a300.ethernet eth0: configuring for fixed/internal link mode | |
[ 35.236875] In rtl838x_mac_config, mode 1 | |
[ 35.291578] rtl83xx-switch switch@1b000000 lan1: configuring for phy/qsgmii link mode | |
[ 35.394916] In rtl838x_mac_config, mode 1 | |
[ 35.447763] rtl838x-eth 1b00a300.ethernet eth0: Link is Up - 1Gbps/Full - flow control off | |
[ 35.448019] 8021q: adding VLAN 0 to HW filter on device lan1 | |
[ 35.631838] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
[ 35.714588] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 35.802018] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 35.890621] rtl83xx_fib_event_work_do: FIB4 failed | |
[ 35.953936] rtl83xx_fib_event_work_do: FIB4 failed | |
[ 36.018405] rtl83xx_fib_event_work_do: FIB4 failed | |
[ 36.081730] rtl83xx_fib_event_work_do: FIB4 failed | |
[ 36.148126] random: procd: uninitialized urandom read (4 bytes read) | |
Press the [f] key and hit [enter] to enter failsafe mode | |
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | |
[ 37.966159] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 38.417628] rtl83xx_fib4_del: no such gateway: 0.0.0.0 | |
[ 38.485447] rtl83xx_fib4_del: no such gateway: 0.0.0.0 | |
[ 38.553278] rtl83xx_fib4_del: no such gateway: 0.0.0.0 | |
[ 38.621029] rtl83xx_fib4_del: no such gateway: 0.0.0.0 | |
[ 38.729255] procd: - early - | |
[ 38.767703] procd: - watchdog - | |
[ 40.276257] procd: - watchdog - | |
[ 40.318213] procd: - ubus - | |
[ 40.365168] random: ubusd: uninitialized urandom read (4 bytes read) | |
[ 40.450126] random: ubusd: uninitialized urandom read (4 bytes read) | |
[ 40.534496] random: ubusd: uninitialized urandom read (4 bytes read) | |
[ 40.622450] procd: - init - | |
Please press Enter to activate this console. | |
[ 41.340885] kmodloader: loading kernel modules from /etc/modules.d/* | |
[ 41.430501] i2c /dev entries driver | |
[ 41.486868] i2c i2c-1: Added multiplexed i2c bus 2 | |
[ 41.550519] i2c i2c-1: Added multiplexed i2c bus 3 | |
[ 41.614608] i2c i2c-1: Added multiplexed i2c bus 4 | |
[ 41.678660] i2c i2c-1: Added multiplexed i2c bus 5 | |
[ 41.741871] pca954x 1-0070: registered 4 multiplexed busses for I2C switch pca9545 | |
[ 41.848867] sfp sfp-p45: Host maximum power 1.0W | |
[ 41.913853] sfp sfp-p46: Host maximum power 1.0W | |
[ 41.978745] sfp sfp-p47: Host maximum power 1.0W | |
[ 42.050798] sfp sfp-p48: Host maximum power 1.0W | |
[ 42.121219] gpio-fan gpio-fan: GPIO fan initialized | |
[ 42.191426] GACT probability on | |
[ 42.238144] Mirror/redirect action on | |
[ 42.242056] urngd: v1.0.2 started. | |
[ 42.350354] u32 classifier | |
[ 42.386182] input device check on | |
[ 42.434363] Actions configured | |
[ 42.508165] lm75 0-0048: hwmon1: sensor 'tcn75' | |
[ 42.569821] lm75 0-0049: hwmon2: sensor 'tcn75' | |
[ 42.760694] kmodloader: done loading kernel modules from /etc/modules.d/* | |
[ 42.936410] random: crng init done | |
[ 42.981223] random: 18 urandom warning(s) missed due to ratelimiting | |
[ 48.670966] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 60.562905] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 60.696879] in rtl838x_eth_stop | |
[ 60.738328] rtl838x-eth 1b00a300.ethernet eth0: Link is Down | |
[ 61.484603] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 61.571963] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 61.659247] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 61.746597] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 61.850134] Using MAC 0000005040101ab6 | |
[ 61.900007] RESETTING 8390, CPU_PORT 52 | |
[ 62.216932] rtl838x-eth 1b00a300.ethernet eth0: configuring for fixed/internal link mode | |
[ 62.323626] In rtl838x_mac_config, mode 1 | |
[ 62.376796] In rtl838x_mac_config, mode 1 | |
[ 62.429732] rtl838x-eth 1b00a300.ethernet eth0: Link is Up - 1Gbps/Full - flow control off | |
[ 62.544712] rtl83xx-switch switch@1b000000 lan1: configuring for phy/qsgmii link mode | |
[ 62.696432] 8021q: adding VLAN 0 to HW filter on device lan1 | |
[ 62.773363] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
[ 62.856346] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 62.943800] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 63.086335] switch: port 1(lan1) entered blocking state | |
[ 63.155371] switch: port 1(lan1) entered disabled state | |
[ 63.225308] device lan1 entered promiscuous mode | |
[ 63.286151] device eth0 entered promiscuous mode | |
[ 63.449975] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 63.544692] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 63.725246] rtl83xx-switch switch@1b000000 lan2: configuring for phy/qsgmii link mode | |
[ 63.926167] 8021q: adding VLAN 0 to HW filter on device lan2 | |
[ 64.116626] switch: port 2(lan2) entered blocking state | |
[ 64.185633] switch: port 2(lan2) entered disabled state | |
[ 64.255456] device lan2 entered promiscuous mode | |
[ 64.378206] rtl83xx-switch switch@1b000000 lan3: configuring for phy/qsgmii link mode | |
[ 64.488116] 8021q: adding VLAN 0 to HW filter on device lan3 | |
[ 64.676483] switch: port 3(lan3) entered blocking state | |
[ 64.745447] switch: port 3(lan3) entered disabled state | |
[ 64.815440] device lan3 entered promiscuous mode | |
[ 64.877564] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 64.965126] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 65.076712] rtl83xx-switch switch@1b000000 lan4: configuring for phy/qsgmii link mode | |
[ 65.187190] 8021q: adding VLAN 0 to HW filter on device lan4 | |
[ 65.426298] switch: port 4(lan4) entered blocking state | |
[ 65.495242] switch: port 4(lan4) entered disabled state | |
[ 65.565711] device lan4 entered promiscuous mode | |
[ 65.641183] rtl83xx-switch switch@1b000000 lan5: configuring for phy/qsgmii link mode | |
[ 65.746432] 8021q: adding VLAN 0 to HW filter on device lan5 | |
[ 65.986169] rtl83xx-switch switch@1b000000 lan1: Link is Up - 1Gbps/Full - flow control rx/tx | |
[ 66.106411] switch: port 5(lan5) entered blocking state | |
[ 66.175470] switch: port 5(lan5) entered disabled state | |
[ 66.245121] device lan5 entered promiscuous mode | |
[ 66.307072] switch: port 1(lan1) entered blocking state | |
[ 66.375900] switch: port 1(lan1) entered forwarding state | |
[ 66.448289] IPv6: ADDRCONF(NETDEV_CHANGE): switch: link becomes ready | |
[ 66.534667] IPv6: ADDRCONF(NETDEV_CHANGE): switch.1: link becomes ready | |
[ 66.633141] rtl83xx-switch switch@1b000000 lan6: configuring for phy/qsgmii link mode | |
[ 66.746449] 8021q: adding VLAN 0 to HW filter on device lan6 | |
[ 66.986189] switch: port 6(lan6) entered blocking state | |
[ 67.055026] switch: port 6(lan6) entered disabled state | |
[ 67.124347] device lan6 entered promiscuous mode | |
[ 67.195726] rtl83xx-switch switch@1b000000 lan7: configuring for phy/qsgmii link mode | |
[ 67.306427] 8021q: adding VLAN 0 to HW filter on device lan7 | |
[ 67.536216] switch: port 7(lan7) entered blocking state | |
[ 67.605121] switch: port 7(lan7) entered disabled state | |
[ 67.674512] device lan7 entered promiscuous mode | |
[ 67.746027] rtl83xx-switch switch@1b000000 lan8: configuring for phy/qsgmii link mode | |
[ 67.856432] 8021q: adding VLAN 0 to HW filter on device lan8 | |
[ 68.106195] switch: port 8(lan8) entered blocking state | |
[ 68.175086] switch: port 8(lan8) entered disabled state | |
[ 68.244613] device lan8 entered promiscuous mode | |
[ 68.316248] rtl83xx-switch switch@1b000000 lan9: configuring for phy/qsgmii link mode | |
[ 68.426687] 8021q: adding VLAN 0 to HW filter on device lan9 | |
[ 68.716210] switch: port 9(lan9) entered blocking state | |
[ 68.785104] switch: port 9(lan9) entered disabled state | |
[ 68.854735] device lan9 entered promiscuous mode | |
[ 68.931802] rtl83xx-switch switch@1b000000 lan10: configuring for phy/qsgmii link mode | |
[ 69.046445] 8021q: adding VLAN 0 to HW filter on device lan10 | |
[ 69.386186] switch: port 10(lan10) entered blocking state | |
[ 69.457357] switch: port 10(lan10) entered disabled state | |
[ 69.529054] device lan10 entered promiscuous mode | |
[ 69.592352] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 69.679894] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
[ 69.775972] rtl83xx-switch switch@1b000000 lan11: configuring for phy/qsgmii link mode | |
[ 69.886421] 8021q: adding VLAN 0 to HW filter on device lan11 | |
[ 70.126197] switch: port 11(lan11) entered blocking state | |
[ 70.197342] switch: port 11(lan11) entered disabled state | |
[ 70.268964] device lan11 entered promiscuous mode | |
[ 70.339469] rtl83xx-switch switch@1b000000 lan12: configuring for phy/qsgmii link mode | |
[ 70.447322] 8021q: adding VLAN 0 to HW filter on device lan12 | |
[ 70.736194] switch: port 12(lan12) entered blocking state | |
[ 70.807357] switch: port 12(lan12) entered disabled state | |
[ 70.878967] device lan12 entered promiscuous mode | |
[ 70.949558] rtl83xx-switch switch@1b000000 lan13: configuring for phy/qsgmii link mode | |
[ 71.056465] 8021q: adding VLAN 0 to HW filter on device lan13 | |
[ 71.246179] switch: port 13(lan13) entered blocking state | |
[ 71.317292] switch: port 13(lan13) entered disabled state | |
[ 71.389155] device lan13 entered promiscuous mode | |
[ 71.459968] rtl83xx-switch switch@1b000000 lan14: configuring for phy/qsgmii link mode | |
[ 71.466199] rtl83xx-switch switch@1b000000 lan7: Link is Up - 1Gbps/Full - flow control rx/tx | |
[ 71.726284] 8021q: adding VLAN 0 to HW filter on device lan14 | |
[ 71.802487] switch: port 7(lan7) entered blocking state | |
[ 71.871352] switch: port 7(lan7) entered forwarding state | |
[ 72.076243] switch: port 14(lan14) entered blocking state | |
[ 72.147372] switch: port 14(lan14) entered disabled state | |
[ 72.219314] device lan14 entered promiscuous mode | |
[ 72.290588] rtl83xx-switch switch@1b000000 lan15: configuring for phy/qsgmii link mode | |
[ 72.416357] 8021q: adding VLAN 0 to HW filter on device lan15 | |
[ 72.706221] switch: port 15(lan15) entered blocking state | |
[ 72.777427] switch: port 15(lan15) entered disabled state | |
[ 72.849112] device lan15 entered promiscuous mode | |
[ 72.919883] rtl83xx-switch switch@1b000000 lan16: configuring for phy/qsgmii link mode | |
[ 73.027839] 8021q: adding VLAN 0 to HW filter on device lan16 | |
[ 73.416221] switch: port 16(lan16) entered blocking state | |
[ 73.487381] switch: port 16(lan16) entered disabled state | |
[ 73.559107] device lan16 entered promiscuous mode | |
[ 73.633457] rtl83xx-switch switch@1b000000 lan17: configuring for phy/qsgmii link mode | |
[ 73.806343] 8021q: adding VLAN 0 to HW filter on device lan17 | |
[ 74.146186] switch: port 17(lan17) entered blocking state | |
[ 74.217342] switch: port 17(lan17) entered disabled state | |
[ 74.289204] device lan17 entered promiscuous mode | |
[ 74.360063] rtl83xx-switch switch@1b000000 lan18: configuring for phy/qsgmii link mode | |
[ 74.468241] 8021q: adding VLAN 0 to HW filter on device lan18 | |
[ 75.066580] switch: port 18(lan18) entered blocking state | |
[ 75.137710] switch: port 18(lan18) entered disabled state | |
[ 75.209450] device lan18 entered promiscuous mode | |
[ 75.282288] rtl83xx-switch switch@1b000000 lan19: configuring for phy/qsgmii link mode | |
[ 75.406469] 8021q: adding VLAN 0 to HW filter on device lan19 | |
[ 75.836210] switch: port 19(lan19) entered blocking state | |
[ 75.907419] switch: port 19(lan19) entered disabled state | |
[ 75.979361] device lan19 entered promiscuous mode | |
[ 76.050186] rtl83xx-switch switch@1b000000 lan20: configuring for phy/qsgmii link mode | |
[ 76.156594] 8021q: adding VLAN 0 to HW filter on device lan20 | |
[ 76.346219] switch: port 20(lan20) entered blocking state | |
[ 76.417357] switch: port 20(lan20) entered disabled state | |
[ 76.489595] device lan20 entered promiscuous mode | |
[ 76.560571] rtl83xx-switch switch@1b000000 lan21: configuring for phy/qsgmii link mode | |
[ 76.666489] 8021q: adding VLAN 0 to HW filter on device lan21 | |
[ 77.326185] switch: port 21(lan21) entered blocking state | |
[ 77.397302] switch: port 21(lan21) entered disabled state | |
[ 77.469161] device lan21 entered promiscuous mode | |
[ 77.547089] rtl83xx-switch switch@1b000000 lan22: configuring for phy/qsgmii link mode | |
[ 77.756287] 8021q: adding VLAN 0 to HW filter on device lan22 | |
[ 78.306186] switch: port 22(lan22) entered blocking state | |
[ 78.377365] switch: port 22(lan22) entered disabled state | |
[ 78.449232] device lan22 entered promiscuous mode | |
[ 78.532346] rtl83xx-switch switch@1b000000 lan23: configuring for phy/qsgmii link mode | |
[ 78.646497] 8021q: adding VLAN 0 to HW filter on device lan23 | |
[ 78.966216] switch: port 23(lan23) entered blocking state | |
[ 79.037426] switch: port 23(lan23) entered disabled state | |
[ 79.109157] device lan23 entered promiscuous mode | |
[ 79.180308] rtl83xx-switch switch@1b000000 lan24: configuring for phy/qsgmii link mode | |
[ 79.286430] 8021q: adding VLAN 0 to HW filter on device lan24 | |
[ 79.926227] switch: port 24(lan24) entered blocking state | |
[ 79.997370] switch: port 24(lan24) entered disabled state | |
[ 80.069109] device lan24 entered promiscuous mode | |
[ 80.152231] rtl83xx-switch switch@1b000000 lan25: configuring for phy/qsgmii link mode | |
[ 80.316284] 8021q: adding VLAN 0 to HW filter on device lan25 | |
[ 80.986213] switch: port 25(lan25) entered blocking state | |
[ 81.057415] switch: port 25(lan25) entered disabled state | |
[ 81.129369] device lan25 entered promiscuous mode | |
[ 81.200603] rtl83xx-switch switch@1b000000 lan26: configuring for phy/qsgmii link mode | |
[ 81.426321] 8021q: adding VLAN 0 to HW filter on device lan26 | |
[ 82.266209] switch: port 26(lan26) entered blocking state | |
[ 82.337387] switch: port 26(lan26) entered disabled state | |
[ 82.409088] device lan26 entered promiscuous mode | |
[ 82.479974] rtl83xx-switch switch@1b000000 lan27: configuring for phy/qsgmii link mode | |
[ 82.756348] 8021q: adding VLAN 0 to HW filter on device lan27 | |
[ 83.866222] switch: port 27(lan27) entered blocking state | |
[ 83.937448] switch: port 27(lan27) entered disabled state | |
[ 84.009402] device lan27 entered promiscuous mode | |
[ 84.080635] rtl83xx-switch switch@1b000000 lan28: configuring for phy/qsgmii link mode | |
[ 84.286352] 8021q: adding VLAN 0 to HW filter on device lan28 | |
[ 84.956211] switch: port 28(lan28) entered blocking state | |
[ 85.027383] switch: port 28(lan28) entered disabled state | |
[ 85.099301] device lan28 entered promiscuous mode | |
[ 85.170219] rtl83xx-switch switch@1b000000 lan29: configuring for phy/qsgmii link mode | |
[ 85.278187] 8021q: adding VLAN 0 to HW filter on device lan29 | |
[ 86.456221] switch: port 29(lan29) entered blocking state | |
[ 86.527376] switch: port 29(lan29) entered disabled state | |
[ 86.599127] device lan29 entered promiscuous mode | |
[ 86.677045] rtl83xx-switch switch@1b000000 lan30: configuring for phy/qsgmii link mode | |
[ 86.936297] 8021q: adding VLAN 0 to HW filter on device lan30 | |
[ 87.816214] switch: port 30(lan30) entered blocking state | |
[ 87.887426] switch: port 30(lan30) entered disabled state | |
[ 87.959378] device lan30 entered promiscuous mode | |
[ 88.034070] rtl83xx-switch switch@1b000000 lan31: configuring for phy/qsgmii link mode | |
[ 88.296286] 8021q: adding VLAN 0 to HW filter on device lan31 | |
[ 89.796297] switch: port 31(lan31) entered blocking state | |
[ 89.867440] switch: port 31(lan31) entered disabled state | |
[ 89.939181] device lan31 entered promiscuous mode | |
[ 90.010099] rtl83xx-switch switch@1b000000 lan32: configuring for phy/qsgmii link mode | |
[ 90.226329] 8021q: adding VLAN 0 to HW filter on device lan32 | |
[ 91.366213] switch: port 32(lan32) entered blocking state | |
[ 91.437421] switch: port 32(lan32) entered disabled state | |
[ 91.509146] device lan32 entered promiscuous mode | |
[ 91.822283] rtl83xx-switch switch@1b000000 lan33: configuring for phy/qsgmii link mode | |
[ 91.936482] 8021q: adding VLAN 0 to HW filter on device lan33 | |
[ 92.946223] switch: port 33(lan33) entered blocking state | |
[ 93.017382] switch: port 33(lan33) entered disabled state | |
[ 93.089341] device lan33 entered promiscuous mode | |
[ 93.160245] rtl83xx-switch switch@1b000000 lan34: configuring for phy/qsgmii link mode | |
[ 93.268211] 8021q: adding VLAN 0 to HW filter on device lan34 | |
[ 94.886367] switch: port 34(lan34) entered blocking state | |
[ 94.957608] switch: port 34(lan34) entered disabled state | |
[ 95.029647] device lan34 entered promiscuous mode | |
[ 95.106247] rtl83xx-switch switch@1b000000 lan35: configuring for phy/qsgmii link mode | |
[ 95.386586] 8021q: adding VLAN 0 to HW filter on device lan35 | |
[ 96.516339] switch: port 35(lan35) entered blocking state | |
[ 96.587574] switch: port 35(lan35) entered disabled state | |
[ 96.659971] device lan35 entered promiscuous mode | |
[ 96.733396] rtl83xx-switch switch@1b000000 lan36: configuring for phy/qsgmii link mode | |
[ 97.186328] 8021q: adding VLAN 0 to HW filter on device lan36 | |
[ 98.776296] switch: port 36(lan36) entered blocking state | |
[ 98.847420] switch: port 36(lan36) entered disabled state | |
[ 98.919146] device lan36 entered promiscuous mode | |
[ 98.990062] rtl83xx-switch switch@1b000000 lan37: configuring for phy/qsgmii link mode | |
[ 99.096601] 8021q: adding VLAN 0 to HW filter on device lan37 | |
[ 100.446224] switch: port 37(lan37) entered blocking state | |
[ 100.517476] switch: port 37(lan37) entered disabled state | |
[ 100.589192] device lan37 entered promiscuous mode | |
[ 100.929133] rtl83xx-switch switch@1b000000 lan38: configuring for phy/qsgmii link mode | |
[ 101.036557] 8021q: adding VLAN 0 to HW filter on device lan38 | |
[ 102.456209] switch: port 38(lan38) entered blocking state | |
[ 102.527377] switch: port 38(lan38) entered disabled state | |
[ 102.599272] device lan38 entered promiscuous mode | |
[ 102.670452] rtl83xx-switch switch@1b000000 lan39: configuring for phy/qsgmii link mode | |
[ 102.776428] 8021q: adding VLAN 0 to HW filter on device lan39 | |
[ 104.536207] switch: port 39(lan39) entered blocking state | |
[ 104.607382] switch: port 39(lan39) entered disabled state | |
[ 104.679061] device lan39 entered promiscuous mode | |
[ 104.750030] rtl83xx-switch switch@1b000000 lan40: configuring for phy/qsgmii link mode | |
[ 105.096284] 8021q: adding VLAN 0 to HW filter on device lan40 | |
[ 106.756218] switch: port 40(lan40) entered blocking state | |
[ 106.827396] switch: port 40(lan40) entered disabled state | |
[ 106.899415] device lan40 entered promiscuous mode | |
[ 106.971040] rtl83xx-switch switch@1b000000 lan41: configuring for phy/qsgmii link mode | |
[ 107.356347] 8021q: adding VLAN 0 to HW filter on device lan41 | |
[ 109.196238] switch: port 41(lan41) entered blocking state | |
[ 109.267479] switch: port 41(lan41) entered disabled state | |
[ 109.339764] device lan41 entered promiscuous mode | |
[ 109.842174] rtl83xx-switch switch@1b000000 lan42: configuring for phy/qsgmii link mode | |
[ 109.956948] 8021q: adding VLAN 0 to HW filter on device lan42 | |
[ 111.886213] switch: port 42(lan42) entered blocking state | |
[ 111.957357] switch: port 42(lan42) entered disabled state | |
[ 112.029138] device lan42 entered promiscuous mode | |
[ 112.142119] rtl83xx-switch switch@1b000000 lan43: configuring for phy/qsgmii link mode | |
[ 112.256522] 8021q: adding VLAN 0 to HW filter on device lan43 | |
[ 114.186210] switch: port 43(lan43) entered blocking state | |
[ 114.257416] switch: port 43(lan43) entered disabled state | |
[ 114.329184] device lan43 entered promiscuous mode | |
[ 114.692112] rtl83xx-switch switch@1b000000 lan44: configuring for phy/qsgmii link mode | |
[ 115.086298] 8021q: adding VLAN 0 to HW filter on device lan44 | |
[ 117.356221] switch: port 44(lan44) entered blocking state | |
[ 117.427369] switch: port 44(lan44) entered disabled state | |
[ 117.499676] device lan44 entered promiscuous mode | |
[ 117.792448] rtl83xx-switch switch@1b000000 lan45: configuring for phy/qsgmii link mode | |
[ 117.906929] 8021q: adding VLAN 0 to HW filter on device lan45 | |
[ 120.176221] switch: port 45(lan45) entered blocking state | |
[ 120.247361] switch: port 45(lan45) entered disabled state | |
[ 120.319103] device lan45 entered promiscuous mode | |
[ 120.396947] rtl83xx-switch switch@1b000000 lan46: configuring for phy/qsgmii link mode | |
[ 120.876294] 8021q: adding VLAN 0 to HW filter on device lan46 | |
[ 123.316192] switch: port 46(lan46) entered blocking state | |
[ 123.387355] switch: port 46(lan46) entered disabled state | |
[ 123.459281] device lan46 entered promiscuous mode | |
[ 123.530757] rtl83xx-switch switch@1b000000 lan47: configuring for phy/qsgmii link mode | |
[ 123.638710] 8021q: adding VLAN 0 to HW filter on device lan47 | |
[ 126.156256] switch: port 47(lan47) entered blocking state | |
[ 126.227401] switch: port 47(lan47) entered disabled state | |
[ 126.299166] device lan47 entered promiscuous mode | |
[ 126.672732] rtl83xx-switch switch@1b000000 lan48: configuring for phy/qsgmii link mode | |
[ 127.156286] 8021q: adding VLAN 0 to HW filter on device lan48 | |
[ 129.696216] switch: port 48(lan48) entered blocking state | |
[ 129.767388] switch: port 48(lan48) entered disabled state | |
[ 129.839405] device lan48 entered promiscuous mode | |
[ 130.013723] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported | |
(boot complete) |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment