Skip to content

Instantly share code, notes, and snippets.

@musashino205

musashino205/Switch-M48eG_PN28480K_b99d377886_otto-timer_continuous-flag-patch.log

Created October 31, 2022 12:47
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save musashino205/2aa32ff858d863de9790c75c3a0b5bf8 to your computer and use it in GitHub Desktop.
Save musashino205/2aa32ff858d863de9790c75c3a0b5bf8 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
Switch-M48eG_PN28480K_b99d377886_otto-timer_continuous-flag-patch.log
U-Boot 2011.12.46351-1.00.09-svn5722 (Mar 12 2015 - 20:08:54)
Board: RTL839x CPU:700MHz LXB:200MHz MEM:400MHz
DRAM: 128 MB
SPI-F: 1x32 MB
Loading 65536B env. variables from offset 0x80000
#### Periphery Devices Init Successfully ####
Switch Model: RTL8393M_8218B_8218FB_2SFP (Port Count: 48)
Switch Chip: RTL8393M
Model Info: 83936802
### RTL8218B config - MAC ID = 0 ###
### RTL8218B config - MAC ID = 8 ###
### RTL8218B config - MAC ID = 16 ###
### RTL8218B config - MAC ID = 24 ###
### RTL8218B config - MAC ID = 32 ###
### RTL8218FB config - MAC ID = 40 ###
PHY[0]: disable EEE
PHY[1]: disable EEE
PHY[2]: disable EEE
PHY[3]: disable EEE
PHY[4]: disable EEE
PHY[5]: disable EEE
RTL839x# # rtk network on
Enable network
Please wait for PHY init-time ...
RTL839x# # tftp 0x81000000
*** Warning: no boot file name; using '0101A8C0.img'
Using rtl8390#0 device
TFTP from server 192.168.1.111; our IP address is 192.168.1.1
Filename '0101A8C0.img'.
Load address: 0x81000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#######################################################
done
Bytes transferred = 7484326 (7233a6 hex)
RTL839x# # bootm
## Booting kernel from Legacy Image at 81000000 ...
Image Name: MIPS OpenWrt Linux-5.10.152
Created: 2022-10-31 12:32:26 UTC
Image Type: MIPS Linux Kernel Image (gzip compressed)
Data Size: 7484262 Bytes = 7.1 MB
Load Address: 80000000
Entry Point: 80000400
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
[ 0.000000] Linux version 5.10.152 (musashino205@TAIHA.NET) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r20877+8-7d6032f310) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Mon Oct 31 12:32:26 2022
[ 0.000000] RTL838X model is ffffffff
[ 0.000000] RTL839X model is 83936802
[ 0.000000] SoC Type: RTL8393
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019555 (MIPS 34Kc)
[ 0.000000] MIPS: machine is Panasonic Switch-M48eG PN28480K
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Using appended Device Tree.
[ 0.000000] Detected 1 available secondary CPU(s)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] Normal zone: 288 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] percpu: Embedded 14 pages/cpu s26864 r8192 d22288 u57344
[ 0.000000] pcpu-alloc: s26864 r8192 d22288 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
[ 0.000000] Kernel command line: console=ttyS0,9600
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] Writing ErrCtl register=0005dd86
[ 0.000000] Readback ErrCtl register=0005dd86
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 110648K/131072K available (6177K kernel code, 612K rwdata, 1296K rodata, 10656K init, 206K bss, 20424K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 256
[ 0.000000] rtl83xx-clk: initialized, CPU 700 MHz, MEM 400 MHz (8 Bit DDR3), LXB 200 MHz
[ 0.000000] clocksource: realtek_otto_timer: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 38225208801 ns
[ 0.000000] sched_clock: 28 bits at 3125kHz, resolution 320ns, wraps every 42949672800ns
[ 0.000000] Calibrating delay loop... 464.48 BogoMIPS (lpj=2322432)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000000] rcu: Hierarchical SRCU implementation.
[ 0.000000] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.000000] smp: Bringing up secondary CPUs ...
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] CPU1 revision is: 00019555 (MIPS 34Kc)
[ 0.000000] Synchronize counters for CPU 1: done.
[ 0.000000] smp: Brought up 1 node, 2 CPUs
[ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.000000] pinctrl core: initialized pinctrl subsystem
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] thermal_sys: Registered thermal governor 'step_wise'
[ 0.000000] rtl83xx-clk clock-controller: rate setting enabled, CPU 400-850 MHz, MEM 400-400 MHz, LXB 200-200 MHz, OVERCLOCK AT OWN RISK
[ 0.000139] clocksource: Switched to clocksource realtek_otto_timer
[ 0.085308] NET: Registered protocol family 2
[ 0.142129] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.238328] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.347499] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.448216] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.540905] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.624870] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.710542] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.802924] NET: Registered protocol family 1
[ 1.162445] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[ 1.252192] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.327854] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 1.466911] pinctrl-single 1b000004.pinmux: 32 pins, size 4
[ 1.540014] pinctrl-single 1b0000e4.pinmux: 32 pins, size 4
[ 1.721984] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.807167] printk: console [ttyS0] disabled
[ 1.862458] 18002000.uart: ttyS0 at MMIO 0x18002000 (irq = 31, base_baud = 12500000) is a 16550A
[ 1.978115] printk: console [ttyS0] enabled
[ 1.978115] printk: console [ttyS0] enabled
[ 2.088064] printk: bootconsole [early0] disabled
[ 2.088064] printk: bootconsole [early0] disabled
[ 2.459441] brd: module loaded
[ 2.504880] spi-nor spi0.0: mx25l25635e (32768 Kbytes)
[ 2.572735] 8 fixed-partitions partitions found on MTD device spi0.0
[ 2.656578] OF: Bad cell count for /soc/spi@1200/flash@0/partitions
[ 2.739203] OF: Bad cell count for /soc/spi@1200/flash@0/partitions
[ 2.822676] Creating 8 MTD partitions on "spi0.0":
[ 2.885883] 0x000000000000-0x000000080000 : "u-boot"
[ 2.953921] 0x000000080000-0x000000090000 : "u-boot-env"
[ 3.025897] 0x000000090000-0x0000000a0000 : "u-boot-env2"
[ 3.098869] 0x0000000a0000-0x000000100000 : "sysinfo"
[ 3.167312] 0x000000100000-0x000000e00000 : "fs_reserved"
[ 3.242302] 0x000000e00000-0x000001e00000 : "firmware"
[ 3.312410] 2 uimage-fw partitions found on MTD device firmware
[ 3.390703] Creating 2 MTD partitions on "firmware":
[ 3.456191] 0x000000000000-0x000000360000 : "kernel"
[ 3.523444] 0x000000360000-0x000001000000 : "rootfs"
[ 3.591327] mtd: device 7 (rootfs) set to be root filesystem
[ 3.666865] 1 squashfs-split partitions found on MTD device rootfs
[ 3.748371] 0x000000690000-0x000001000000 : "rootfs_data"
[ 3.821166] 0x000001e00000-0x000001f00000 : "vlog_data"
[ 3.891986] 0x000001f00000-0x000002000000 : "elog_data"
[ 3.986206] RTL839X Chip-Info: a0016290, version B
[ 4.050128] Probing RTL838X eth device pdev: 82170800, dev: 82170810
[ 4.163691] Found SoC ID: 8393: RTL8393, family 8390
[ 4.229359] Using MAC 0000005040101ab6
[ 5.551653] NET: Registered protocol family 10
[ 5.619138] Segment Routing with IPv6
[ 5.667548] NET: Registered protocol family 17
[ 5.726807] 8021q: 802.1Q VLAN Support v1.8
[ 5.784401] pca953x 0-0020: using no AI
[ 5.838805] pca953x 0-0075: using no AI
[ 5.893031] gpio-470 (portled-sregister-reset): hogged as output/high
[ 5.978406] gpio-468 (ext-switch-reset): hogged as output/high
[ 6.056949] i2c-gpio i2c-gpio-0: using lines 505 (SDA) and 504 (SCL)
[ 6.142845] i2c-gpio i2c-gpio-1: using lines 503 (SDA) and 502 (SCL)
[ 6.228858] RTL839X Chip-Info: a0016290, version B
[ 7.551188] rtl8393_serdes_probe: id: 48
[ 7.602867] Realtek RTL8393 SERDES rtl838x slave mii-0:30: Detected internal RTL8390 SERDES
[ 7.738002] rtl8393_serdes_probe: id: 49
[ 7.789800] Realtek RTL8393 SERDES rtl838x slave mii-0:31: Detected internal RTL8390 SERDES
[ 7.902303] rtl83xx_mdio_probe found port 0
[ 7.957520] rtl83xx_mdio_probe port 0 has phandle
[ 8.019496] rtl83xx_mdio_probe port -1 has SDS
[ 8.078061] rtl83xx_mdio_probe found port 1
[ 8.133201] rtl83xx_mdio_probe port 1 has phandle
[ 8.195214] rtl83xx_mdio_probe port -1 has SDS
[ 8.253816] rtl83xx_mdio_probe found port 2
[ 8.308925] rtl83xx_mdio_probe port 2 has phandle
[ 8.370866] rtl83xx_mdio_probe port -1 has SDS
[ 8.429435] rtl83xx_mdio_probe found port 3
[ 8.484493] rtl83xx_mdio_probe port 3 has phandle
[ 8.546502] rtl83xx_mdio_probe port -1 has SDS
[ 8.605108] rtl83xx_mdio_probe found port 4
[ 8.660232] rtl83xx_mdio_probe port 4 has phandle
[ 8.722270] rtl83xx_mdio_probe port -1 has SDS
[ 8.780847] rtl83xx_mdio_probe found port 5
[ 8.835971] rtl83xx_mdio_probe port 5 has phandle
[ 8.897895] rtl83xx_mdio_probe port -1 has SDS
[ 8.956500] rtl83xx_mdio_probe found port 6
[ 9.011635] rtl83xx_mdio_probe port 6 has phandle
[ 9.073653] rtl83xx_mdio_probe port -1 has SDS
[ 9.132240] rtl83xx_mdio_probe found port 7
[ 9.187365] rtl83xx_mdio_probe port 7 has phandle
[ 9.249289] rtl83xx_mdio_probe port -1 has SDS
[ 9.307893] rtl83xx_mdio_probe found port 8
[ 9.363018] rtl83xx_mdio_probe port 8 has phandle
[ 9.425043] rtl83xx_mdio_probe port -1 has SDS
[ 9.483632] rtl83xx_mdio_probe found port 9
[ 9.538761] rtl83xx_mdio_probe port 9 has phandle
[ 9.600789] rtl83xx_mdio_probe port -1 has SDS
[ 9.659371] rtl83xx_mdio_probe found port 10
[ 9.715666] rtl83xx_mdio_probe port 10 has phandle
[ 9.778836] rtl83xx_mdio_probe port -1 has SDS
[ 9.837422] rtl83xx_mdio_probe found port 11
[ 9.893712] rtl83xx_mdio_probe port 11 has phandle
[ 9.956869] rtl83xx_mdio_probe port -1 has SDS
[ 10.015473] rtl83xx_mdio_probe found port 12
[ 10.071748] rtl83xx_mdio_probe port 12 has phandle
[ 10.134924] rtl83xx_mdio_probe port -1 has SDS
[ 10.193506] rtl83xx_mdio_probe found port 13
[ 10.249778] rtl83xx_mdio_probe port 13 has phandle
[ 10.312848] rtl83xx_mdio_probe port -1 has SDS
[ 10.371451] rtl83xx_mdio_probe found port 14
[ 10.427706] rtl83xx_mdio_probe port 14 has phandle
[ 10.490795] rtl83xx_mdio_probe port -1 has SDS
[ 10.549364] rtl83xx_mdio_probe found port 15
[ 10.605573] rtl83xx_mdio_probe port 15 has phandle
[ 10.668724] rtl83xx_mdio_probe port -1 has SDS
[ 10.727327] rtl83xx_mdio_probe found port 16
[ 10.783600] rtl83xx_mdio_probe port 16 has phandle
[ 10.846776] rtl83xx_mdio_probe port -1 has SDS
[ 10.905361] rtl83xx_mdio_probe found port 17
[ 10.961650] rtl83xx_mdio_probe port 17 has phandle
[ 11.024808] rtl83xx_mdio_probe port -1 has SDS
[ 11.083412] rtl83xx_mdio_probe found port 18
[ 11.139669] rtl83xx_mdio_probe port 18 has phandle
[ 11.202756] rtl83xx_mdio_probe port -1 has SDS
[ 11.261351] rtl83xx_mdio_probe found port 19
[ 11.317612] rtl83xx_mdio_probe port 19 has phandle
[ 11.380684] rtl83xx_mdio_probe port -1 has SDS
[ 11.439269] rtl83xx_mdio_probe found port 20
[ 11.495560] rtl83xx_mdio_probe port 20 has phandle
[ 11.558733] rtl83xx_mdio_probe port -1 has SDS
[ 11.617324] rtl83xx_mdio_probe found port 21
[ 11.673611] rtl83xx_mdio_probe port 21 has phandle
[ 11.736768] rtl83xx_mdio_probe port -1 has SDS
[ 11.795370] rtl83xx_mdio_probe found port 22
[ 11.851643] rtl83xx_mdio_probe port 22 has phandle
[ 11.914819] rtl83xx_mdio_probe port -1 has SDS
[ 11.973405] rtl83xx_mdio_probe found port 23
[ 12.029677] rtl83xx_mdio_probe port 23 has phandle
[ 12.092748] rtl83xx_mdio_probe port -1 has SDS
[ 12.151351] rtl83xx_mdio_probe found port 24
[ 12.207607] rtl83xx_mdio_probe port 24 has phandle
[ 12.270694] rtl83xx_mdio_probe port -1 has SDS
[ 12.329271] rtl83xx_mdio_probe found port 25
[ 12.385569] rtl83xx_mdio_probe port 25 has phandle
[ 12.448727] rtl83xx_mdio_probe port -1 has SDS
[ 12.507329] rtl83xx_mdio_probe found port 26
[ 12.563602] rtl83xx_mdio_probe port 26 has phandle
[ 12.626781] rtl83xx_mdio_probe port -1 has SDS
[ 12.685362] rtl83xx_mdio_probe found port 27
[ 12.741654] rtl83xx_mdio_probe port 27 has phandle
[ 12.804812] rtl83xx_mdio_probe port -1 has SDS
[ 12.863412] rtl83xx_mdio_probe found port 28
[ 12.919668] rtl83xx_mdio_probe port 28 has phandle
[ 12.982758] rtl83xx_mdio_probe port -1 has SDS
[ 13.041345] rtl83xx_mdio_probe found port 29
[ 13.097614] rtl83xx_mdio_probe port 29 has phandle
[ 13.160687] rtl83xx_mdio_probe port -1 has SDS
[ 13.219272] rtl83xx_mdio_probe found port 30
[ 13.275563] rtl83xx_mdio_probe port 30 has phandle
[ 13.338738] rtl83xx_mdio_probe port -1 has SDS
[ 13.397334] rtl83xx_mdio_probe found port 31
[ 13.453611] rtl83xx_mdio_probe port 31 has phandle
[ 13.516770] rtl83xx_mdio_probe port -1 has SDS
[ 13.575374] rtl83xx_mdio_probe found port 32
[ 13.631649] rtl83xx_mdio_probe port 32 has phandle
[ 13.694819] rtl83xx_mdio_probe port -1 has SDS
[ 13.753408] rtl83xx_mdio_probe found port 33
[ 13.809681] rtl83xx_mdio_probe port 33 has phandle
[ 13.872750] rtl83xx_mdio_probe port -1 has SDS
[ 13.931352] rtl83xx_mdio_probe found port 34
[ 13.987608] rtl83xx_mdio_probe port 34 has phandle
[ 14.050694] rtl83xx_mdio_probe port -1 has SDS
[ 14.109264] rtl83xx_mdio_probe found port 35
[ 14.165466] rtl83xx_mdio_probe port 35 has phandle
[ 14.228625] rtl83xx_mdio_probe port -1 has SDS
[ 14.287228] rtl83xx_mdio_probe found port 36
[ 14.343501] rtl83xx_mdio_probe port 36 has phandle
[ 14.406676] rtl83xx_mdio_probe port -1 has SDS
[ 14.465270] rtl83xx_mdio_probe found port 37
[ 14.521550] rtl83xx_mdio_probe port 37 has phandle
[ 14.584712] rtl83xx_mdio_probe port -1 has SDS
[ 14.643311] rtl83xx_mdio_probe found port 38
[ 14.699567] rtl83xx_mdio_probe port 38 has phandle
[ 14.762655] rtl83xx_mdio_probe port -1 has SDS
[ 14.821240] rtl83xx_mdio_probe found port 39
[ 14.877515] rtl83xx_mdio_probe port 39 has phandle
[ 14.940584] rtl83xx_mdio_probe port -1 has SDS
[ 14.999168] rtl83xx_mdio_probe found port 40
[ 15.055459] rtl83xx_mdio_probe port 40 has phandle
[ 15.118633] rtl83xx_mdio_probe port -1 has SDS
[ 15.177221] rtl83xx_mdio_probe found port 41
[ 15.233509] rtl83xx_mdio_probe port 41 has phandle
[ 15.296667] rtl83xx_mdio_probe port -1 has SDS
[ 15.355270] rtl83xx_mdio_probe found port 42
[ 15.411545] rtl83xx_mdio_probe port 42 has phandle
[ 15.474719] rtl83xx_mdio_probe port -1 has SDS
[ 15.533312] rtl83xx_mdio_probe found port 43
[ 15.589579] rtl83xx_mdio_probe port 43 has phandle
[ 15.652647] rtl83xx_mdio_probe port -1 has SDS
[ 15.711250] rtl83xx_mdio_probe found port 44
[ 15.767505] rtl83xx_mdio_probe port 44 has phandle
[ 15.830593] rtl83xx_mdio_probe port -1 has SDS
[ 15.889162] rtl83xx_mdio_probe found port 45
[ 15.945366] rtl83xx_mdio_probe port 45 has phandle
[ 16.008523] rtl83xx_mdio_probe port -1 has SDS
[ 16.067126] rtl83xx_mdio_probe found port 46
[ 16.123398] rtl83xx_mdio_probe port 46 has phandle
[ 16.186572] rtl83xx_mdio_probe port -1 has SDS
[ 16.245160] rtl83xx_mdio_probe found port 47
[ 16.301449] rtl83xx_mdio_probe port 47 has phandle
[ 16.364607] rtl83xx_mdio_probe port -1 has SDS
[ 16.423209] rtl83xx_mdio_probe found port 52
[ 16.504467] In rtl83xx_vlan_setup
[ 16.548117] UNKNOWN_MC_PMASK: 001fffffffffffff
[ 16.606664] VLAN profile 0: L2 learning: 1, UNKN L2MC FLD PMSK 511, UNKN IPMC FLD PMSK 511, UNKN IPv6MC FLD PMSK: 511
[ 16.606675] VLAN profile 0: raw 000001ff, 003fe3ff
[ 17.890087] rtl83xx_enable_phy_polling: ffffffffffff
[ 19.010730] rtl83xx-switch switch@1b000000 lan1 (uninitialized): PHY [mdio-bus:00] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 19.168453] rtl83xx-switch switch@1b000000 lan2 (uninitialized): PHY [mdio-bus:01] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 19.325709] rtl83xx-switch switch@1b000000 lan3 (uninitialized): PHY [mdio-bus:02] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 19.483694] rtl83xx-switch switch@1b000000 lan4 (uninitialized): PHY [mdio-bus:03] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 19.642084] rtl83xx-switch switch@1b000000 lan5 (uninitialized): PHY [mdio-bus:04] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 19.799819] rtl83xx-switch switch@1b000000 lan6 (uninitialized): PHY [mdio-bus:05] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 19.957473] rtl83xx-switch switch@1b000000 lan7 (uninitialized): PHY [mdio-bus:06] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 20.115070] rtl83xx-switch switch@1b000000 lan8 (uninitialized): PHY [mdio-bus:07] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 20.273142] rtl83xx-switch switch@1b000000 lan9 (uninitialized): PHY [mdio-bus:08] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 20.430850] rtl83xx-switch switch@1b000000 lan10 (uninitialized): PHY [mdio-bus:09] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 20.589667] rtl83xx-switch switch@1b000000 lan11 (uninitialized): PHY [mdio-bus:0a] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 20.748578] rtl83xx-switch switch@1b000000 lan12 (uninitialized): PHY [mdio-bus:0b] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 20.907438] rtl83xx-switch switch@1b000000 lan13 (uninitialized): PHY [mdio-bus:0c] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 21.066376] rtl83xx-switch switch@1b000000 lan14 (uninitialized): PHY [mdio-bus:0d] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 21.225301] rtl83xx-switch switch@1b000000 lan15 (uninitialized): PHY [mdio-bus:0e] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 21.384514] rtl83xx-switch switch@1b000000 lan16 (uninitialized): PHY [mdio-bus:0f] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 21.543477] rtl83xx-switch switch@1b000000 lan17 (uninitialized): PHY [mdio-bus:10] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 21.702813] rtl83xx-switch switch@1b000000 lan18 (uninitialized): PHY [mdio-bus:11] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 21.861759] rtl83xx-switch switch@1b000000 lan19 (uninitialized): PHY [mdio-bus:12] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 22.021053] rtl83xx-switch switch@1b000000 lan20 (uninitialized): PHY [mdio-bus:13] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 22.179928] rtl83xx-switch switch@1b000000 lan21 (uninitialized): PHY [mdio-bus:14] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 22.338869] rtl83xx-switch switch@1b000000 lan22 (uninitialized): PHY [mdio-bus:15] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 22.497784] rtl83xx-switch switch@1b000000 lan23 (uninitialized): PHY [mdio-bus:16] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 22.656692] rtl83xx-switch switch@1b000000 lan24 (uninitialized): PHY [mdio-bus:17] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 22.815629] rtl83xx-switch switch@1b000000 lan25 (uninitialized): PHY [mdio-bus:18] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 22.974487] rtl83xx-switch switch@1b000000 lan26 (uninitialized): PHY [mdio-bus:19] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 23.133405] rtl83xx-switch switch@1b000000 lan27 (uninitialized): PHY [mdio-bus:1a] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 23.292687] rtl83xx-switch switch@1b000000 lan28 (uninitialized): PHY [mdio-bus:1b] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 23.452043] rtl83xx-switch switch@1b000000 lan29 (uninitialized): PHY [mdio-bus:1c] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 23.610910] rtl83xx-switch switch@1b000000 lan30 (uninitialized): PHY [mdio-bus:1d] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 23.769893] rtl83xx-switch switch@1b000000 lan31 (uninitialized): PHY [mdio-bus:1e] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 23.928773] rtl83xx-switch switch@1b000000 lan32 (uninitialized): PHY [mdio-bus:1f] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 24.087640] rtl83xx-switch switch@1b000000 lan33 (uninitialized): PHY [mdio-bus:20] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 24.246528] rtl83xx-switch switch@1b000000 lan34 (uninitialized): PHY [mdio-bus:21] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 24.405467] rtl83xx-switch switch@1b000000 lan35 (uninitialized): PHY [mdio-bus:22] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 24.564363] rtl83xx-switch switch@1b000000 lan36 (uninitialized): PHY [mdio-bus:23] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 24.723272] rtl83xx-switch switch@1b000000 lan37 (uninitialized): PHY [mdio-bus:24] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 24.882549] rtl83xx-switch switch@1b000000 lan38 (uninitialized): PHY [mdio-bus:25] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 25.041449] rtl83xx-switch switch@1b000000 lan39 (uninitialized): PHY [mdio-bus:26] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 25.200796] rtl83xx-switch switch@1b000000 lan40 (uninitialized): PHY [mdio-bus:27] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 25.360234] rtl83xx-switch switch@1b000000 lan41 (uninitialized): PHY [mdio-bus:28] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 25.519073] rtl83xx-switch switch@1b000000 lan42 (uninitialized): PHY [mdio-bus:29] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 25.677971] rtl83xx-switch switch@1b000000 lan43 (uninitialized): PHY [mdio-bus:2a] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 25.836765] rtl83xx-switch switch@1b000000 lan44 (uninitialized): PHY [mdio-bus:2b] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 25.995711] rtl83xx-switch switch@1b000000 lan45 (uninitialized): PHY [mdio-bus:2c] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 26.154609] rtl83xx-switch switch@1b000000 lan46 (uninitialized): PHY [mdio-bus:2d] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 26.313497] rtl83xx-switch switch@1b000000 lan47 (uninitialized): PHY [mdio-bus:2e] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 26.472842] rtl83xx-switch switch@1b000000 lan48 (uninitialized): PHY [mdio-bus:2f] driver [Realtek RTL8218B (external)] (irq=POLL)
[ 26.631592] rtl83xx-switch switch@1b000000: configuring for fixed/internal link mode
[ 26.734930] DSA: tree 0 setup
[ 26.774258] LINK state irq: 20
[ 26.814542] In rtl83xx_setup_qos
[ 26.856974] Setting up RTL839X QoS
[ 26.901703] RTL839X_PRI_SEL_TBL_CTRL(i): 01112111
[ 26.963629] Current Intprio2queue setting: 00000000
[ 27.027939] QM_PKT2CPU_INTPRI_MAP: 00fac688
[ 27.083159] rtl838x_dbgfs_init called
[ 27.211544] Freeing unused kernel memory: 10656K
[ 27.272403] This architecture does not have kernel memory protection.
[ 27.357365] Run /init as init process
[ 27.405584] with arguments:
[ 27.444587] /init
[ 27.474492] with environment:
[ 27.515784] HOME=/
[ 27.546829] TERM=linux
[ 27.582628] rtl83xx-switch switch@1b000000: Link is Up - 1Gbps/Full - flow control off
[ 27.687168] rtl83xx_fib_event_work_do: FIB4 default rule failed
[ 28.608137] init: Console is alive
[ 28.653535] init: - watchdog -
[ 28.719271] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 28.817122] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 28.923044] init: - preinit -
[ 29.249263] random: jshn: uninitialized urandom read (4 bytes read)
[ 29.438965] random: jshn: uninitialized urandom read (4 bytes read)
[ 31.508200] random: jshn: uninitialized urandom read (4 bytes read)
[ 31.664433] random: jshn: uninitialized urandom read (4 bytes read)
[ 32.064427] random: jshn: uninitialized urandom read (4 bytes read)
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
sh: out of range
[ 33.718859] RESETTING 8390, CPU_PORT 52
[ 33.969490] rtl838x-eth 1b00a300.ethernet eth0: configuring for fixed/internal link mode
[ 34.076092] In rtl838x_mac_config, mode 1
[ 34.130926] rtl83xx-switch switch@1b000000 lan1: configuring for phy/qsgmii link mode
[ 34.234312] In rtl838x_mac_config, mode 1
[ 34.240401] 8021q: adding VLAN 0 to HW filter on device lan1
[ 34.287216] rtl838x-eth 1b00a300.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 34.470992] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.553890] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 34.641209] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 34.729898] rtl83xx_fib_event_work_do: FIB4 failed
[ 34.793434] rtl83xx_fib_event_work_do: FIB4 failed
[ 34.856833] rtl83xx_fib_event_work_do: FIB4 failed
[ 34.921268] rtl83xx_fib_event_work_do: FIB4 failed
[ 34.992366] random: procd: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 35.810138] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 37.242892] rtl83xx_fib4_del: no such gateway: 0.0.0.0
[ 37.310781] rtl83xx_fib4_del: no such gateway: 0.0.0.0
[ 37.378643] rtl83xx_fib4_del: no such gateway: 0.0.0.0
[ 37.446845] rtl83xx_fib4_del: no such gateway: 0.0.0.0
[ 37.531039] procd: - early -
[ 37.569304] procd: - watchdog -
[ 39.135477] procd: - watchdog -
[ 39.177424] procd: - ubus -
[ 39.224639] random: ubusd: uninitialized urandom read (4 bytes read)
[ 39.309585] random: ubusd: uninitialized urandom read (4 bytes read)
[ 39.394274] random: ubusd: uninitialized urandom read (4 bytes read)
[ 39.482406] procd: - init -
Please press Enter to activate this console.
[ 40.205108] kmodloader: loading kernel modules from /etc/modules.d/*
[ 40.295117] i2c /dev entries driver
[ 40.352357] i2c i2c-1: Added multiplexed i2c bus 2
[ 40.416216] i2c i2c-1: Added multiplexed i2c bus 3
[ 40.480192] i2c i2c-1: Added multiplexed i2c bus 4
[ 40.544103] i2c i2c-1: Added multiplexed i2c bus 5
[ 40.607406] pca954x 1-0070: registered 4 multiplexed busses for I2C switch pca9545
[ 40.717533] sfp sfp-p45: Host maximum power 1.0W
[ 40.782238] sfp sfp-p46: Host maximum power 1.0W
[ 40.791457] urngd: v1.0.2 started.
[ 40.846794] sfp sfp-p47: Host maximum power 1.0W
[ 40.952560] sfp sfp-p48: Host maximum power 1.0W
[ 41.064134] gpio-fan gpio-fan: GPIO fan initialized
[ 41.135709] GACT probability on
[ 41.180465] Mirror/redirect action on
[ 41.247273] u32 classifier
[ 41.282961] input device check on
[ 41.331265] Actions configured
[ 41.356166] random: crng init done
[ 41.398392] lm75 0-0048: hwmon1: sensor 'tcn75'
[ 41.421067] random: 18 urandom warning(s) missed due to ratelimiting
[ 41.482488] lm75 0-0049: hwmon2: sensor 'tcn75'
[ 41.736592] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 47.974218] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 59.099940] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 59.236144] in rtl838x_eth_stop
[ 59.277997] rtl838x-eth 1b00a300.ethernet eth0: Link is Down
[ 60.031568] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 60.119008] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 60.206422] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 60.293770] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 60.404229] Using MAC 0000005040101ab6
[ 60.464594] RESETTING 8390, CPU_PORT 52
[ 60.781610] rtl838x-eth 1b00a300.ethernet eth0: configuring for fixed/internal link mode
[ 60.888263] In rtl838x_mac_config, mode 1
[ 60.941603] In rtl838x_mac_config, mode 1
[ 60.994511] rtl838x-eth 1b00a300.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 61.112002] rtl83xx-switch switch@1b000000 lan1: configuring for phy/qsgmii link mode
[ 61.216385] 8021q: adding VLAN 0 to HW filter on device lan1
[ 61.292742] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 61.375751] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 61.463201] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 61.551641] switch: port 1(lan1) entered blocking state
[ 61.620569] switch: port 1(lan1) entered disabled state
[ 61.690660] device lan1 entered promiscuous mode
[ 61.751545] device eth0 entered promiscuous mode
[ 61.855653] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 62.032237] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 62.178797] rtl83xx-switch switch@1b000000 lan2: configuring for phy/qsgmii link mode
[ 62.285594] 8021q: adding VLAN 0 to HW filter on device lan2
[ 62.369696] switch: port 2(lan2) entered blocking state
[ 62.438784] switch: port 2(lan2) entered disabled state
[ 62.508724] device lan2 entered promiscuous mode
[ 62.594590] rtl83xx-switch switch@1b000000 lan3: configuring for phy/qsgmii link mode
[ 62.698485] 8021q: adding VLAN 0 to HW filter on device lan3
[ 62.784392] switch: port 3(lan3) entered blocking state
[ 62.853372] switch: port 3(lan3) entered disabled state
[ 62.924463] device lan3 entered promiscuous mode
[ 63.010290] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 63.097640] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 63.188199] rtl83xx-switch switch@1b000000 lan4: configuring for phy/qsgmii link mode
[ 63.292932] 8021q: adding VLAN 0 to HW filter on device lan4
[ 63.375781] switch: port 4(lan4) entered blocking state
[ 63.444760] switch: port 4(lan4) entered disabled state
[ 63.516914] device lan4 entered promiscuous mode
[ 63.606576] rtl83xx-switch switch@1b000000 lan5: configuring for phy/qsgmii link mode
[ 63.710812] 8021q: adding VLAN 0 to HW filter on device lan5
[ 63.794406] switch: port 5(lan5) entered blocking state
[ 63.863396] switch: port 5(lan5) entered disabled state
[ 63.985073] device lan5 entered promiscuous mode
[ 64.090839] rtl83xx-switch switch@1b000000 lan6: configuring for phy/qsgmii link mode
[ 64.218847] 8021q: adding VLAN 0 to HW filter on device lan6
[ 64.301547] switch: port 6(lan6) entered blocking state
[ 64.370598] switch: port 6(lan6) entered disabled state
[ 64.441291] device lan6 entered promiscuous mode
[ 64.526519] rtl83xx-switch switch@1b000000 lan7: configuring for phy/qsgmii link mode
[ 64.632438] 8021q: adding VLAN 0 to HW filter on device lan7
[ 64.716828] switch: port 7(lan7) entered blocking state
[ 64.785773] switch: port 7(lan7) entered disabled state
[ 64.855532] device lan7 entered promiscuous mode
[ 64.935088] rtl83xx-switch switch@1b000000 lan8: configuring for phy/qsgmii link mode
[ 65.042891] 8021q: adding VLAN 0 to HW filter on device lan8
[ 65.129672] switch: port 8(lan8) entered blocking state
[ 65.198735] switch: port 8(lan8) entered disabled state
[ 65.268462] device lan8 entered promiscuous mode
[ 65.347986] rtl83xx-switch switch@1b000000 lan9: configuring for phy/qsgmii link mode
[ 65.458898] 8021q: adding VLAN 0 to HW filter on device lan9
[ 65.540777] switch: port 9(lan9) entered blocking state
[ 65.609807] switch: port 9(lan9) entered disabled state
[ 65.679887] device lan9 entered promiscuous mode
[ 65.793808] rtl83xx-switch switch@1b000000 lan10: configuring for phy/qsgmii link mode
[ 65.903944] 8021q: adding VLAN 0 to HW filter on device lan10
[ 65.987362] switch: port 10(lan10) entered blocking state
[ 66.058660] switch: port 10(lan10) entered disabled state
[ 66.130891] device lan10 entered promiscuous mode
[ 66.213073] rtl83xx-switch switch@1b000000 lan11: configuring for phy/qsgmii link mode
[ 66.322232] 8021q: adding VLAN 0 to HW filter on device lan11
[ 66.404983] switch: port 11(lan11) entered blocking state
[ 66.476186] switch: port 11(lan11) entered disabled state
[ 66.548345] device lan11 entered promiscuous mode
[ 66.629064] rtl83xx-switch switch@1b000000 lan12: configuring for phy/qsgmii link mode
[ 66.734167] 8021q: adding VLAN 0 to HW filter on device lan12
[ 66.837805] switch: port 12(lan12) entered blocking state
[ 66.909097] switch: port 12(lan12) entered disabled state
[ 66.981243] device lan12 entered promiscuous mode
[ 67.064075] rtl83xx-switch switch@1b000000 lan13: configuring for phy/qsgmii link mode
[ 67.169158] 8021q: adding VLAN 0 to HW filter on device lan13
[ 67.257277] switch: port 13(lan13) entered blocking state
[ 67.328546] switch: port 13(lan13) entered disabled state
[ 67.400810] device lan13 entered promiscuous mode
[ 67.500671] rtl83xx-switch switch@1b000000 lan14: configuring for phy/qsgmii link mode
[ 67.606001] 8021q: adding VLAN 0 to HW filter on device lan14
[ 67.691191] switch: port 14(lan14) entered blocking state
[ 67.762501] switch: port 14(lan14) entered disabled state
[ 67.834462] device lan14 entered promiscuous mode
[ 67.917256] rtl83xx-switch switch@1b000000 lan15: configuring for phy/qsgmii link mode
[ 68.022519] 8021q: adding VLAN 0 to HW filter on device lan15
[ 68.105816] switch: port 15(lan15) entered blocking state
[ 68.177131] switch: port 15(lan15) entered disabled state
[ 68.249429] device lan15 entered promiscuous mode
[ 68.336365] rtl83xx-switch switch@1b000000 lan16: configuring for phy/qsgmii link mode
[ 68.441507] 8021q: adding VLAN 0 to HW filter on device lan16
[ 68.524604] switch: port 16(lan16) entered blocking state
[ 68.595924] switch: port 16(lan16) entered disabled state
[ 68.667972] device lan16 entered promiscuous mode
[ 68.753124] rtl83xx-switch switch@1b000000 lan17: configuring for phy/qsgmii link mode
[ 68.858151] 8021q: adding VLAN 0 to HW filter on device lan17
[ 68.950445] rtl83xx-switch switch@1b000000 lan7: Link is Up - 1Gbps/Full - flow control rx/tx
[ 69.064587] switch: port 17(lan17) entered blocking state
[ 69.135915] switch: port 17(lan17) entered disabled state
[ 69.208092] device lan17 entered promiscuous mode
[ 69.271990] switch: port 7(lan7) entered blocking state
[ 69.341007] switch: port 7(lan7) entered forwarding state
[ 69.414200] IPv6: ADDRCONF(NETDEV_CHANGE): switch: link becomes ready
[ 69.523440] rtl83xx-switch switch@1b000000 lan18: configuring for phy/qsgmii link mode
[ 69.628825] 8021q: adding VLAN 0 to HW filter on device lan18
[ 69.706187] IPv6: ADDRCONF(NETDEV_CHANGE): switch.1: link becomes ready
[ 69.803683] switch: port 18(lan18) entered blocking state
[ 69.875401] switch: port 18(lan18) entered disabled state
[ 69.947503] device lan18 entered promiscuous mode
[ 70.040550] rtl83xx-switch switch@1b000000 lan19: configuring for phy/qsgmii link mode
[ 70.145825] 8021q: adding VLAN 0 to HW filter on device lan19
[ 70.231282] switch: port 19(lan19) entered blocking state
[ 70.302559] switch: port 19(lan19) entered disabled state
[ 70.374807] device lan19 entered promiscuous mode
[ 70.452092] rtl83xx-switch switch@1b000000 lan20: configuring for phy/qsgmii link mode
[ 70.557298] 8021q: adding VLAN 0 to HW filter on device lan20
[ 70.653789] switch: port 20(lan20) entered blocking state
[ 70.725122] switch: port 20(lan20) entered disabled state
[ 70.797252] device lan20 entered promiscuous mode
[ 70.878506] rtl83xx-switch switch@1b000000 lan21: configuring for phy/qsgmii link mode
[ 70.983771] 8021q: adding VLAN 0 to HW filter on device lan21
[ 71.068453] switch: port 21(lan21) entered blocking state
[ 71.139763] switch: port 21(lan21) entered disabled state
[ 71.211989] device lan21 entered promiscuous mode
[ 71.314899] rtl83xx-switch switch@1b000000 lan22: configuring for phy/qsgmii link mode
[ 71.430468] 8021q: adding VLAN 0 to HW filter on device lan22
[ 71.541727] switch: port 22(lan22) entered blocking state
[ 71.613024] switch: port 22(lan22) entered disabled state
[ 71.685126] device lan22 entered promiscuous mode
[ 71.750663] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 71.838072] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
[ 71.975900] rtl83xx-switch switch@1b000000 lan23: configuring for phy/qsgmii link mode
[ 72.085446] 8021q: adding VLAN 0 to HW filter on device lan23
[ 72.176232] switch: port 23(lan23) entered blocking state
[ 72.247536] switch: port 23(lan23) entered disabled state
[ 72.319601] device lan23 entered promiscuous mode
[ 72.403487] rtl83xx-switch switch@1b000000 lan24: configuring for phy/qsgmii link mode
[ 72.520425] 8021q: adding VLAN 0 to HW filter on device lan24
[ 72.632464] switch: port 24(lan24) entered blocking state
[ 72.703700] switch: port 24(lan24) entered disabled state
[ 72.775832] device lan24 entered promiscuous mode
[ 72.866321] rtl83xx-switch switch@1b000000 lan25: configuring for phy/qsgmii link mode
[ 72.977072] 8021q: adding VLAN 0 to HW filter on device lan25
[ 73.083713] switch: port 25(lan25) entered blocking state
[ 73.154930] switch: port 25(lan25) entered disabled state
[ 73.227024] device lan25 entered promiscuous mode
[ 73.323765] rtl83xx-switch switch@1b000000 lan26: configuring for phy/qsgmii link mode
[ 73.433561] 8021q: adding VLAN 0 to HW filter on device lan26
[ 73.523320] switch: port 26(lan26) entered blocking state
[ 73.594539] switch: port 26(lan26) entered disabled state
[ 73.666821] device lan26 entered promiscuous mode
[ 73.756911] rtl83xx-switch switch@1b000000 lan27: configuring for phy/qsgmii link mode
[ 73.862496] 8021q: adding VLAN 0 to HW filter on device lan27
[ 73.952114] switch: port 27(lan27) entered blocking state
[ 74.023435] switch: port 27(lan27) entered disabled state
[ 74.095437] device lan27 entered promiscuous mode
[ 74.183099] rtl83xx-switch switch@1b000000 lan28: configuring for phy/qsgmii link mode
[ 74.295216] 8021q: adding VLAN 0 to HW filter on device lan28
[ 74.386677] switch: port 28(lan28) entered blocking state
[ 74.458012] switch: port 28(lan28) entered disabled state
[ 74.530448] device lan28 entered promiscuous mode
[ 74.615408] rtl83xx-switch switch@1b000000 lan29: configuring for phy/qsgmii link mode
[ 74.724984] 8021q: adding VLAN 0 to HW filter on device lan29
[ 74.817168] switch: port 29(lan29) entered blocking state
[ 74.888461] switch: port 29(lan29) entered disabled state
[ 74.960803] device lan29 entered promiscuous mode
[ 75.055226] rtl83xx-switch switch@1b000000 lan30: configuring for phy/qsgmii link mode
[ 75.164295] 8021q: adding VLAN 0 to HW filter on device lan30
[ 75.248898] switch: port 30(lan30) entered blocking state
[ 75.320312] switch: port 30(lan30) entered disabled state
[ 75.392235] device lan30 entered promiscuous mode
[ 75.505541] rtl83xx-switch switch@1b000000 lan31: configuring for phy/qsgmii link mode
[ 75.622746] 8021q: adding VLAN 0 to HW filter on device lan31
[ 75.726476] switch: port 31(lan31) entered blocking state
[ 75.797744] switch: port 31(lan31) entered disabled state
[ 75.869783] device lan31 entered promiscuous mode
[ 75.971979] rtl83xx-switch switch@1b000000 lan32: configuring for phy/qsgmii link mode
[ 76.083507] 8021q: adding VLAN 0 to HW filter on device lan32
[ 76.171274] switch: port 32(lan32) entered blocking state
[ 76.242607] switch: port 32(lan32) entered disabled state
[ 76.314782] device lan32 entered promiscuous mode
[ 76.398941] rtl83xx-switch switch@1b000000 lan33: configuring for phy/qsgmii link mode
[ 76.508203] 8021q: adding VLAN 0 to HW filter on device lan33
[ 76.610877] switch: port 33(lan33) entered blocking state
[ 76.682108] switch: port 33(lan33) entered disabled state
[ 76.754257] device lan33 entered promiscuous mode
[ 76.859440] rtl83xx-switch switch@1b000000 lan34: configuring for phy/qsgmii link mode
[ 76.964447] 8021q: adding VLAN 0 to HW filter on device lan34
[ 77.047961] switch: port 34(lan34) entered blocking state
[ 77.119340] switch: port 34(lan34) entered disabled state
[ 77.191561] device lan34 entered promiscuous mode
[ 77.267694] rtl83xx-switch switch@1b000000 lan35: configuring for phy/qsgmii link mode
[ 77.372996] 8021q: adding VLAN 0 to HW filter on device lan35
[ 77.474016] switch: port 35(lan35) entered blocking state
[ 77.545356] switch: port 35(lan35) entered disabled state
[ 77.617698] device lan35 entered promiscuous mode
[ 77.707084] rtl83xx-switch switch@1b000000 lan36: configuring for phy/qsgmii link mode
[ 77.812199] 8021q: adding VLAN 0 to HW filter on device lan36
[ 77.920305] switch: port 36(lan36) entered blocking state
[ 77.991546] switch: port 36(lan36) entered disabled state
[ 78.063327] device lan36 entered promiscuous mode
[ 78.140866] rtl83xx-switch switch@1b000000 lan37: configuring for phy/qsgmii link mode
[ 78.245597] 8021q: adding VLAN 0 to HW filter on device lan37
[ 78.328404] switch: port 37(lan37) entered blocking state
[ 78.399995] switch: port 37(lan37) entered disabled state
[ 78.472077] device lan37 entered promiscuous mode
[ 78.564464] rtl83xx-switch switch@1b000000 lan38: configuring for phy/qsgmii link mode
[ 78.669560] 8021q: adding VLAN 0 to HW filter on device lan38
[ 78.752376] switch: port 38(lan38) entered blocking state
[ 78.823658] switch: port 38(lan38) entered disabled state
[ 78.895707] device lan38 entered promiscuous mode
[ 78.981475] rtl83xx-switch switch@1b000000 lan39: configuring for phy/qsgmii link mode
[ 79.089104] 8021q: adding VLAN 0 to HW filter on device lan39
[ 79.194339] switch: port 39(lan39) entered blocking state
[ 79.265552] switch: port 39(lan39) entered disabled state
[ 79.337874] device lan39 entered promiscuous mode
[ 79.410244] rtl83xx-switch switch@1b000000 lan40: configuring for phy/qsgmii link mode
[ 79.518137] 8021q: adding VLAN 0 to HW filter on device lan40
[ 79.600987] switch: port 40(lan40) entered blocking state
[ 79.672224] switch: port 40(lan40) entered disabled state
[ 79.743995] device lan40 entered promiscuous mode
[ 79.817336] rtl83xx-switch switch@1b000000 lan41: configuring for phy/qsgmii link mode
[ 79.922147] 8021q: adding VLAN 0 to HW filter on device lan41
[ 80.005802] switch: port 41(lan41) entered blocking state
[ 80.077007] switch: port 41(lan41) entered disabled state
[ 80.148978] device lan41 entered promiscuous mode
[ 80.237802] rtl83xx-switch switch@1b000000 lan42: configuring for phy/qsgmii link mode
[ 80.343029] 8021q: adding VLAN 0 to HW filter on device lan42
[ 80.453343] switch: port 42(lan42) entered blocking state
[ 80.524563] switch: port 42(lan42) entered disabled state
[ 80.596918] device lan42 entered promiscuous mode
[ 80.675657] rtl83xx-switch switch@1b000000 lan43: configuring for phy/qsgmii link mode
[ 80.783391] 8021q: adding VLAN 0 to HW filter on device lan43
[ 80.872910] switch: port 43(lan43) entered blocking state
[ 80.944153] switch: port 43(lan43) entered disabled state
[ 81.016487] device lan43 entered promiscuous mode
[ 81.089830] rtl83xx-switch switch@1b000000 lan44: configuring for phy/qsgmii link mode
[ 81.194920] 8021q: adding VLAN 0 to HW filter on device lan44
[ 81.277733] switch: port 44(lan44) entered blocking state
[ 81.349297] switch: port 44(lan44) entered disabled state
[ 81.421187] device lan44 entered promiscuous mode
[ 81.497039] rtl83xx-switch switch@1b000000 lan45: configuring for phy/qsgmii link mode
[ 81.625453] 8021q: adding VLAN 0 to HW filter on device lan45
[ 81.739374] switch: port 45(lan45) entered blocking state
[ 81.810596] switch: port 45(lan45) entered disabled state
[ 81.882929] device lan45 entered promiscuous mode
[ 81.984878] rtl83xx-switch switch@1b000000 lan46: configuring for phy/qsgmii link mode
[ 82.093517] 8021q: adding VLAN 0 to HW filter on device lan46
[ 82.175609] switch: port 46(lan46) entered blocking state
[ 82.246841] switch: port 46(lan46) entered disabled state
[ 82.318693] device lan46 entered promiscuous mode
[ 82.391944] rtl83xx-switch switch@1b000000 lan47: configuring for phy/qsgmii link mode
[ 82.496742] 8021q: adding VLAN 0 to HW filter on device lan47
[ 82.579520] switch: port 47(lan47) entered blocking state
[ 82.651482] switch: port 47(lan47) entered disabled state
[ 82.723305] device lan47 entered promiscuous mode
[ 82.812382] rtl83xx-switch switch@1b000000 lan48: configuring for phy/qsgmii link mode
[ 82.917431] 8021q: adding VLAN 0 to HW filter on device lan48
[ 83.065742] switch: port 48(lan48) entered blocking state
[ 83.136922] switch: port 48(lan48) entered disabled state
[ 83.209285] device lan48 entered promiscuous mode
[ 83.285120] rtl83xx_fib_event: FIB_RULE ADD/DELL for IPv6 not supported
(boot completed)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment