-
-
Save myguidingstar/d074a72ef6a97d2b0adf3de4428420ce to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.0.9] (local build) | |
| Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Device Model: FUHLER C2004 240G | |
| Serial Number: SN1805026101858 | |
| Firmware Version: Q0601B | |
| User Capacity: 240,057,409,536 bytes [240 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Form Factor: 2.5 inches | |
| Device is: Not in smartctl database [for details use: -P showall] | |
| ATA Version is: ACS-2 T13/2015-D revision 3 | |
| SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) | |
| Local Time is: Tue Apr 30 10:55:17 2019 +07 | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 120) seconds. | |
| Offline data collection | |
| capabilities: (0x11) SMART execute Offline immediate. | |
| No Auto Offline data collection support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| No Selective Self-test supported. | |
| SMART capabilities: (0x0002) Does not save SMART data before | |
| entering power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 10) minutes. | |
| SMART Attributes Data Structure revision number: 1 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 | |
| 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 | |
| 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 224 | |
| 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 76 | |
| 160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 | |
| 161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100 | |
| 163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 10 | |
| 164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 3980 | |
| 165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 9 | |
| 166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1 | |
| 167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 2 | |
| 168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1500 | |
| 169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 | |
| 175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 | |
| 176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 | |
| 177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 156 | |
| 178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 | |
| 181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 | |
| 182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 35 | |
| 194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 40 | |
| 195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 869959 | |
| 196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 4 | |
| 232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 | |
| 241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 17450 | |
| 242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 5804 | |
| 245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 16038 | |
| SMART Error Log Version: 1 | |
| Warning: ATA error count 0 inconsistent with error log pointer 1 | |
| ATA Error Count: 0 | |
| CR = Command Register [HEX] | |
| FR = Features Register [HEX] | |
| SC = Sector Count Register [HEX] | |
| SN = Sector Number Register [HEX] | |
| CL = Cylinder Low Register [HEX] | |
| CH = Cylinder High Register [HEX] | |
| DH = Device/Head Register [HEX] | |
| DC = Device Command Register [HEX] | |
| ER = Error register [HEX] | |
| ST = Status register [HEX] | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 51 00 00 00 00 e2 Error: ABRT | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| b0 d0 01 00 4f c2 00 08 00:00:00.000 SMART READ DATA | |
| b0 d1 01 01 4f c2 00 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] | |
| b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS | |
| b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG | |
| b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG | |
| Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 51 00 00 00 00 e0 Error: ABRT | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| b0 d0 01 00 4f c2 00 08 00:00:00.000 SMART READ DATA | |
| b0 d1 01 01 4f c2 00 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] | |
| b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS | |
| b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG | |
| b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG | |
| Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 84 51 00 00 00 00 e8 Error: ABRT | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| b0 d0 01 00 4f c2 00 08 00:00:00.000 SMART READ DATA | |
| b0 d1 01 01 4f c2 00 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] | |
| b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS | |
| b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG | |
| b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 21 - | |
| # 2 Short offline Self-test routine in progress 50% 21 - | |
| # 3 Short offline Completed without error 00% 15 - | |
| Selective Self-tests/Logging not supported |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment