Created
June 29, 2018 14:59
-
-
Save mypiandrew/331cf98189973884872b8e3c77086b01 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
root@raspberrypi:~# dmesg | |
[ 0.000000] Booting Linux on physical CPU 0x0 | |
[ 0.000000] Linux version 4.14.52-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1123 SMP Wed Jun 27 17:35:49 BST 2018 | |
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d | |
[ 0.000000] CPU: div instructions available: patching division code | |
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Compute Module 3 Rev 1.0 | |
[ 0.000000] Memory policy: Data cache writealloc | |
[ 0.000000] cma: Reserved 8 MiB at 0x3ac00000 | |
[ 0.000000] On node 0 totalpages: 242688 | |
[ 0.000000] free_area_init_node: node 0, pgdat 80c85000, node_mem_map ba3a1000 | |
[ 0.000000] Normal zone: 2133 pages used for memmap | |
[ 0.000000] Normal zone: 0 pages reserved | |
[ 0.000000] Normal zone: 242688 pages, LIFO batch:31 | |
[ 0.000000] percpu: Embedded 17 pages/cpu @ba34b000 s38720 r8192 d22720 u69632 | |
[ 0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096 | |
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 | |
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:B6:A6:BB vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=df9437c2-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait | |
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) | |
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
[ 0.000000] Memory: 940244K/970752K available (7168K kernel code, 575K rwdata, 2072K rodata, 1024K init, 706K bss, 22316K reserved, 8192K cma-reserved) | |
[ 0.000000] Virtual kernel memory layout: | |
vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
vmalloc : 0xbb800000 - 0xff800000 (1088 MB) | |
lowmem : 0x80000000 - 0xbb400000 ( 948 MB) | |
modules : 0x7f000000 - 0x80000000 ( 16 MB) | |
.text : 0x80008000 - 0x80800000 (8160 kB) | |
.init : 0x80b00000 - 0x80c00000 (1024 kB) | |
.data : 0x80c00000 - 0x80c8fef4 ( 576 kB) | |
.bss : 0x80c96f40 - 0x80d47874 ( 707 kB) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] ftrace: allocating 25258 entries in 75 pages | |
[ 0.000000] Hierarchical RCU implementation. | |
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns | |
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns | |
[ 0.000022] Switching to timer-based delay loop, resolution 52ns | |
[ 0.000272] Console: colour dummy device 80x30 | |
[ 0.000813] console [tty1] enabled | |
[ 0.000856] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) | |
[ 0.000895] pid_max: default: 32768 minimum: 301 | |
[ 0.001226] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.001260] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.002212] Disabling memory control group subsystem | |
[ 0.002303] CPU: Testing write buffer coherency: ok | |
[ 0.002708] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
[ 0.003105] Setting up static identity map for 0x100000 - 0x10003c | |
[ 0.003239] Hierarchical SRCU implementation. | |
[ 0.003889] smp: Bringing up secondary CPUs ... | |
[ 0.004588] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
[ 0.005336] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
[ 0.006068] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
[ 0.006171] smp: Brought up 1 node, 4 CPUs | |
[ 0.006241] SMP: Total of 4 processors activated (153.60 BogoMIPS). | |
[ 0.006263] CPU: All CPU(s) started in HYP mode. | |
[ 0.006280] CPU: Virtualization extensions available. | |
[ 0.007152] devtmpfs: initialized | |
[ 0.016880] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0 | |
[ 0.017561] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 | |
[ 0.017803] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.017847] futex hash table entries: 1024 (order: 4, 65536 bytes) | |
[ 0.018418] pinctrl core: initialized pinctrl subsystem | |
[ 0.019187] NET: Registered protocol family 16 | |
[ 0.021823] DMA: preallocated 1024 KiB pool for atomic coherent allocations | |
[ 0.026641] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. | |
[ 0.026673] hw-breakpoint: maximum watchpoint size is 8 bytes. | |
[ 0.026885] Serial: AMBA PL011 UART driver | |
[ 0.028563] bcm2835-mbox 3f00b880.mailbox: mailbox enabled | |
[ 0.029037] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe | |
[ 0.060578] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1 | |
[ 0.062017] SCSI subsystem initialized | |
[ 0.062256] usbcore: registered new interface driver usbfs | |
[ 0.062331] usbcore: registered new interface driver hub | |
[ 0.062432] usbcore: registered new device driver usb | |
[ 0.070078] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-06-21 14:02 | |
[ 0.071400] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.147502] VFS: Disk quotas dquot_6.6.0 | |
[ 0.147616] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
[ 0.147818] FS-Cache: Loaded | |
[ 0.148031] CacheFiles: Loaded | |
[ 0.156867] NET: Registered protocol family 2 | |
[ 0.157607] TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
[ 0.157736] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
[ 0.157938] TCP: Hash tables configured (established 8192 bind 8192) | |
[ 0.158084] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.158146] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.158389] NET: Registered protocol family 1 | |
[ 0.158848] RPC: Registered named UNIX socket transport module. | |
[ 0.158872] RPC: Registered udp transport module. | |
[ 0.158891] RPC: Registered tcp transport module. | |
[ 0.158910] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.160403] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available | |
[ 0.163161] workingset: timestamp_bits=14 max_order=18 bucket_order=4 | |
[ 0.171117] FS-Cache: Netfs 'nfs' registered for caching | |
[ 0.171768] NFS: Registering the id_resolver key type | |
[ 0.171831] Key type id_resolver registered | |
[ 0.171850] Key type id_legacy registered | |
[ 0.171879] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 0.173781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
[ 0.173929] io scheduler noop registered | |
[ 0.173951] io scheduler deadline registered (default) | |
[ 0.174240] io scheduler cfq registered | |
[ 0.174261] io scheduler mq-deadline registered | |
[ 0.174281] io scheduler kyber registered | |
[ 0.176969] BCM2708FB: allocated DMA memory fad10000 | |
[ 0.177013] BCM2708FB: allocated DMA channel 0 @ bb813000 | |
[ 0.213740] Console: switching to colour frame buffer device 160x64 | |
[ 0.235708] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled | |
[ 0.237275] bcm2835-rng 3f104000.rng: hwrng registered | |
[ 0.237549] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) | |
[ 0.238238] vc-sm: Videocore shared memory driver | |
[ 0.238644] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 | |
[ 0.248409] brd: module loaded | |
[ 0.257267] loop: module loaded | |
[ 0.257398] Loading iSCSI transport class v2.0-870. | |
[ 0.258194] libphy: Fixed MDIO Bus: probed | |
[ 0.258422] usbcore: registered new interface driver lan78xx | |
[ 0.258641] usbcore: registered new interface driver smsc95xx | |
[ 0.258816] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
[ 0.487078] Core Release: 2.80a | |
[ 0.487184] Setting default values for core params | |
[ 0.487350] Finished setting default values for core params | |
[ 0.687760] Using Buffer DMA mode | |
[ 0.687865] Periodic Transfer Interrupt Enhancement - disabled | |
[ 0.688031] Multiprocessor Interrupt Enhancement - disabled | |
[ 0.688191] OTG VER PARAM: 0, OTG VER FLAG: 0 | |
[ 0.688325] Dedicated Tx FIFOs mode | |
[ 0.688772] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad04000 dma = 0xfad04000 len=9024 | |
[ 0.689063] FIQ FSM acceleration enabled for : | |
Non-periodic Split Transactions | |
Periodic Split Transactions | |
High-Speed Isochronous Endpoints | |
Interrupt/Control Split Transaction hack enabled | |
[ 0.689652] dwc_otg: Microframe scheduler enabled | |
[ 0.689708] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e7fa8 | |
[ 0.689885] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e8310 length 36 | |
[ 0.690068] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87e000 | |
[ 0.697032] dwc_otg 3f980000.usb: DWC OTG Controller | |
[ 0.703974] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 | |
[ 0.710932] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 | |
[ 0.717837] Init: Port Power? op_state=1 | |
[ 0.724652] Init: Power Port (0) | |
[ 0.731586] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 0.738410] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 0.745237] usb usb1: Product: DWC OTG Controller | |
[ 0.752030] usb usb1: Manufacturer: Linux 4.14.52-v7+ dwc_otg_hcd | |
[ 0.758869] usb usb1: SerialNumber: 3f980000.usb | |
[ 0.766364] hub 1-0:1.0: USB hub found | |
[ 0.773276] hub 1-0:1.0: 1 port detected | |
[ 0.780581] dwc_otg: FIQ enabled | |
[ 0.780586] dwc_otg: NAK holdoff enabled | |
[ 0.780591] dwc_otg: FIQ split-transaction FSM enabled | |
[ 0.780601] Module dwc_common_port init | |
[ 0.780851] usbcore: registered new interface driver usb-storage | |
[ 0.787807] mousedev: PS/2 mouse device common for all mice | |
[ 0.794618] IR NEC protocol handler initialized | |
[ 0.801293] IR RC5(x/sz) protocol handler initialized | |
[ 0.808001] IR RC6 protocol handler initialized | |
[ 0.814694] IR JVC protocol handler initialized | |
[ 0.821330] IR Sony protocol handler initialized | |
[ 0.827946] IR SANYO protocol handler initialized | |
[ 0.834508] IR Sharp protocol handler initialized | |
[ 0.840917] IR MCE Keyboard/mouse protocol handler initialized | |
[ 0.847394] IR XMP protocol handler initialized | |
[ 0.854570] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer | |
[ 0.861447] bcm2835-cpufreq: min=600000 max=1200000 | |
[ 0.868411] sdhci: Secure Digital Host Controller Interface driver | |
[ 0.875162] sdhci: Copyright(c) Pierre Ossman | |
[ 0.882331] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe | |
[ 0.889269] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 0.896540] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 0.903455] hidraw: raw HID events driver (C) Jiri Kosina | |
[ 0.910381] usbcore: registered new interface driver usbhid | |
[ 0.917127] usbhid: USB HID core driver | |
[ 0.924399] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0 | |
[ 0.932623] [vc_sm_connected_init]: start | |
[ 0.942738] [vc_sm_connected_init]: end - returning 0 | |
[ 0.949962] Initializing XFRM netlink socket | |
[ 0.956609] NET: Registered protocol family 17 | |
[ 0.963316] Key type dns_resolver registered | |
[ 0.970307] Registering SWP/SWPB emulation handler | |
[ 0.977575] registered taskstats version 1 | |
[ 0.990034] uart-pl011 3f201000.serial: cts_event_workaround enabled | |
[ 0.996880] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 | |
[ 1.005366] Indeed it is in host mode hprt0 = 00021501 | |
[ 1.072379] console [ttyS0] disabled | |
[ 1.079207] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 166, base_baud = 31250000) is a 16550 | |
[ 1.295193] usb 1-1: new high-speed USB device number 2 using dwc_otg | |
[ 1.300966] Indeed it is in host mode hprt0 = 00001101 | |
[ 1.622614] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 | |
[ 1.622623] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
[ 1.622630] usb 1-1: Product: USB2.0 Hub | |
[ 1.633303] hub 1-1:1.0: USB hub found | |
[ 1.640454] hub 1-1:1.0: 4 ports detected | |
[ 2.234591] console [ttyS0] enabled | |
[ 2.245088] random: fast init done | |
[ 2.256809] sdhost: log_buf @ bad07000 (fad07000) | |
[ 2.341423] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) | |
[ 2.354868] of_cfs_init | |
[ 2.364141] of_cfs_init: OK | |
[ 2.374066] Waiting for root device PARTUUID=df9437c2-02... | |
[ 2.438063] mmc0: new high speed MMC card at address 0001 | |
[ 2.450810] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB | |
[ 2.462291] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB | |
[ 2.475269] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB | |
[ 2.488196] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB | |
[ 2.500779] usb 1-1.1: new high-speed USB device number 3 using dwc_otg | |
[ 2.515882] mmcblk0: p1 p2 | |
[ 2.553238] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem | |
[ 2.567541] EXT4-fs (mmcblk0p2): write access will be enabled during recovery | |
[ 2.641759] usb 1-1.1: New USB device found, idVendor=0424, idProduct=9512 | |
[ 2.655782] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
[ 2.670804] hub 1-1.1:1.0: USB hub found | |
[ 2.681735] hub 1-1.1:1.0: 3 ports detected | |
[ 2.711338] EXT4-fs (mmcblk0p2): recovery complete | |
[ 2.723859] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) | |
[ 2.739003] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. | |
[ 2.760001] devtmpfs: mounted | |
[ 2.773000] Freeing unused kernel memory: 1024K | |
[ 3.011452] usb 1-1.2: new full-speed USB device number 4 using dwc_otg | |
[ 3.172669] WARN::dwc_otg_handle_mode_mismatch_intr:68: Mode Mismatch Interrupt: currently in Host mode | |
[ 3.198390] usb 1-1.2: unable to read config index 0 descriptor/all | |
[ 3.212009] usb 1-1.2: can't read configurations, error -71 | |
[ 3.242180] systemd[1]: System time before build time, advancing clock. | |
[ 3.261445] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg | |
[ 3.390123] NET: Registered protocol family 10 | |
[ 3.401983] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=ec00 | |
[ 3.401992] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
[ 3.404654] smsc95xx v1.0.6 | |
[ 3.443576] Segment Routing with IPv6 | |
[ 3.463687] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ 3.492908] random: systemd: uninitialized urandom read (16 bytes read) | |
[ 3.495233] smsc95xx 1-1.1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b6:a6:bb | |
[ 3.511434] usb 1-1.2: new full-speed USB device number 6 using dwc_otg | |
[ 3.547037] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) | |
[ 3.582211] systemd[1]: Detected architecture arm. | |
[ 3.623069] systemd[1]: Set hostname to <raspberrypi>. | |
[ 3.677217] random: systemd: uninitialized urandom read (16 bytes read) | |
[ 3.689837] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6015 | |
[ 3.689850] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 3.689858] usb 1-1.2: Product: FT230X Basic UART | |
[ 3.689875] usb 1-1.2: Manufacturer: FTDI | |
[ 3.689893] usb 1-1.2: SerialNumber: DN04VVL1 | |
[ 3.693382] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read) | |
[ 3.801508] usb 1-1.3: new high-speed USB device number 7 using dwc_otg | |
[ 3.948010] usb 1-1.3: New USB device found, idVendor=0424, idProduct=2240 | |
[ 3.963239] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 3.978725] usb 1-1.3: Product: Ultra Fast Media | |
[ 3.991433] usb 1-1.3: Manufacturer: Generic | |
[ 4.003701] usb 1-1.3: SerialNumber: 000000225001 | |
[ 4.017520] usb-storage 1-1.3:1.0: USB Mass Storage device detected | |
[ 4.033416] scsi host0: usb-storage 1-1.3:1.0 | |
[ 4.452915] systemd[1]: Created slice System Slice. | |
[ 4.475920] systemd[1]: Created slice system-systemd\x2dfsck.slice. | |
[ 4.499931] systemd[1]: Listening on Journal Socket. | |
[ 4.522334] systemd[1]: Reached target Swap. | |
[ 4.548994] systemd[1]: Starting Load Kernel Modules... | |
[ 4.572974] systemd[1]: Listening on udev Control Socket. | |
[ 4.596643] i2c /dev entries driver | |
[ 4.597691] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
[ 5.228457] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) | |
[ 5.353573] scsi 0:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.98 PQ: 0 ANSI: 0 | |
[ 5.377647] systemd-journald[104]: Received request to flush runtime journal from PID 1 | |
[ 5.573012] sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
[ 6.130164] usbcore: registered new interface driver usbserial | |
[ 6.130238] usbcore: registered new interface driver usbserial_generic | |
[ 6.130296] usbserial: USB Serial support registered for generic | |
[ 6.155476] usbcore: registered new interface driver ftdi_sio | |
[ 6.155552] usbserial: USB Serial support registered for FTDI USB Serial Device | |
[ 6.155927] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected | |
[ 6.156073] usb 1-1.2: Detected FT-X | |
[ 6.164320] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0 | |
[ 6.393539] rtc-ds1307 1-0068: registered as rtc0 | |
[ 7.324711] smsc95xx 1-1.1.1:1.0 eth0: hardware isn't capable of remote wakeup | |
[ 7.324917] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
[ 7.552224] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS | |
[ 7.899520] sd 0:0:0:0: [sda] Spinning up disk... | |
[ 8.807579] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
[ 8.808380] smsc95xx 1-1.1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 | |
[ 9.351437] . | |
[ 9.356687] sd 0:0:0:0: [sda] Attached SCSI removable disk | |
[ 35.342512] random: crng init done | |
[ 35.342525] random: 7 urandom warning(s) missed due to ratelimiting |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment