Last active
December 22, 2023 12:13
-
-
Save myurasov/5db18ff6a7a22952bf22397b928e14a4 to your computer and use it in GitHub Desktop.
my_flow_test_20mm3.gcode
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| G90 ; absolute positioning | |
| M104 S<TEMP>; start nozzle heating | |
| G28; home | |
| M109 S<TEMP> ; heat the nozzle and wait | |
| ; prime | |
| G1 Z15 F1000 ; lift z | |
| G92 E0 ; reset extruder | |
| G1 F100 E50 ; extrude 50mm in 30s | |
| G92 E0 ; reset extruder | |
| G1 Z1 F1000 ; lower z | |
| G0 X100 Y100 Z1 F2400 ; move to start position | |
| G0 Z40 F1200 ; move to start position | |
| G92 E0 ; reset extruder | |
| G1 E498.9 F498.9 ; extract 498.9mm in 1min (== 20mm3) | |
| ;G1 E500 F500 ; close enough (20.04mm3) | |
| G92 E0 ; reset extruder | |
| G1 E-5 F500 ; retract 5mm | |
| G0 X0 Y200 Z50 F2400 ; lift z and go to the side | |
| M104 S0 ; cool down | |
| G92 E0 ; reset extruder | |
| M220 S100 ; reeset speed factor | |
| M221 S100 ; reset extrude factor | |
| M84 ; disable stepper motors |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment