my_flow_test_10mm3.gcode

my_flow_test_10mm3.gcode

G90 ; absolute positioning

M104 S<TEMP>; start nozzle heating
G28; home
M109 S<TEMP> ; heat the nozzle and wait

; prime
G1 Z15 F1000 ; lift z
G92 E0 ; reset extruder
G1 F100 E50 ; extrude 50mm in 30s
G92 E0 ; reset extruder
G1 Z1 F1000 ; lower z

G0 X100 Y100 Z1 F2400 ; move to start position
G0 Z40 F1200 ; move to start position
G92 E0 ; reset extruder
G1 E249.5 F249.5 ; extract 249.5mm in 1min (== 10mm3)

G92 E0 ; reset extruder
G1 E-5 F500 ; retract 5mm
G0 X0 Y200 Z50 F2400 ; lift z and go to the side

M104 S0 ; cool down
G92 E0 ; reset extruder

M220 S100 ; reeset speed factor
M221 S100 ; reset extrude factor
M84 ; disable stepper motors