Network I Lab

command.md

Display for check setting

• display vlan <number of vlan>

  ex. display vlan 100

Set IP Address of Switch

1. system-view and enter for enter setting mode
2. interface vlan 1 and enter for setting vlan
3. ip address <ip> <netmask>

   ex. ip address 192.168.1.5 24

Create Vlan

1. sytem-view
2. vlan <number of vlan>

   ex. vlan 100

3. port g <port number> to g <port number>

   ex. port g 1/0/1 to g 1/0/3

Create Link Aggregation

1. system-view
2. inteface bridge-aggregation <number>

   ex. interface bridge-aggregation 1

3. enter to port needed ex. int g 1/0/1
4. port link-aggregation group 1

If want to Create Link Aggregation before trunk

1. system-view
2. enter bridge needed inteface bridge-aggregation 1
3. port link-type trunk
4. enter vlan id needed port trunk permit vlan 100

If not want Create Link Aggregation before Create Trunk

1. system-view
2. enter to port needed ex. int g 1/0/1
3. port link-type trunk
4. enter vlan id needed port trunk permit vlan 100

Set Telnet

1. system-view
2. enter user needed locale-user john
3. enter password password chipher 1234
4. enter level needed authorization-attribute level 3
5. service-type telnet
6. quit
7. enter user size user-interface vty 0 <start with 0> <end>

   ex. 5 user = user-interface vty 0 4

8. authentication-mode scheme
9. telnet server enable

Set Spanning Tree

1. system-view
2. stp enable * must enable all switch connected