Created
April 25, 2016 14:50
-
-
Save nartes/09b891316b72842110a9f90fabe7639e to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /etc/wpa_supplicant/ sudo wpa_supplicant -dd -i wlp1s0b1 -c /etc/wpa_supplicant/eduroam.conf | |
| wpa_supplicant v2.5 | |
| Successfully initialized wpa_supplicant | |
| Initializing interface 'wlp1s0b1' conf '/etc/wpa_supplicant/eduroam.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' | |
| Configuration file '/etc/wpa_supplicant/eduroam.conf' -> '/etc/wpa_supplicant/diana.conf' | |
| Reading configuration file '/etc/wpa_supplicant/eduroam.conf' | |
| Line: 1 - start of a new network block | |
| ssid - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| key_mgmt: 0x1 | |
| eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00 | |
| phase1 - hexdump_ascii(len=43): | |
| 74 6c 73 5f 64 69 73 61 62 6c 65 5f 74 6c 73 76 tls_disable_tlsv | |
| 31 5f 31 3d 31 20 74 6c 73 5f 64 69 73 61 62 6c 1_1=1 tls_disabl | |
| 65 5f 74 6c 73 76 31 5f 32 3d 31 e_tlsv1_2=1 | |
| phase2 - hexdump_ascii(len=13): | |
| 61 75 74 68 3d 4d 53 43 48 41 50 56 32 auth=MSCHAPV2 | |
| identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| password - hexdump_ascii(len=6): [REMOVED] | |
| Priority group 0 | |
| id=0 ssid='eduroam' | |
| rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 | |
| rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0 | |
| rfkill: initial event: idx=2 type=2 op=0 soft=0 hard=0 | |
| rfkill: initial event: idx=4 type=2 op=0 soft=0 hard=0 | |
| nl80211: Supported cipher 00-0f-ac:1 | |
| nl80211: Supported cipher 00-0f-ac:5 | |
| nl80211: Supported cipher 00-0f-ac:2 | |
| nl80211: Supported cipher 00-0f-ac:4 | |
| nl80211: Supported cipher 00-0f-ac:10 | |
| nl80211: Supported cipher 00-0f-ac:8 | |
| nl80211: Supported cipher 00-0f-ac:9 | |
| nl80211: Using driver-based off-channel TX | |
| nl80211: interface wlp1s0b1 in phy phy0 | |
| nl80211: Set mode ifindex 2 iftype 2 (STATION) | |
| nl80211: Subscribe to mgmt frames with non-AP handle 0x1e0b8c0 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=040a | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 04 0a | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=040b | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 04 0b | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=040c | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 04 0c | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=040d | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 04 0d | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=090a | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 09 0a | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=090b | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 09 0b | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=090c | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 09 0c | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=090d | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 09 0d | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=0409506f9a09 | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=7f506f9a09 | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=0801 | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 08 01 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=06 | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=1): 06 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=0a07 | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 0a 07 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=0a11 | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 0a 11 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=1101 | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 11 01 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=1102 | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 11 02 | |
| nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1e0b8c0 match=0505 | |
| nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
| nl80211: Register frame match - hexdump(len=2): 05 05 | |
| nl80211: Failed to register Action frame processing - ignore for now | |
| netlink: Operstate: ifindex=2 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT) | |
| nl80211: driver param='(null)' | |
| Add interface wlp1s0b1 to a new radio phy0 | |
| nl80211: Regulatory information - country=BY (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) | |
| nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| wlp1s0b1: Own MAC address: 74:2f:68:d2:b1:f3 | |
| wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0b1) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 | |
| wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0b1) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 | |
| wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0b1) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 | |
| wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0b1) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 | |
| wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0b1) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 | |
| wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0b1) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 | |
| wlp1s0b1: RSN: flushing PMKID list in the driver | |
| nl80211: Flush PMKIDs | |
| wlp1s0b1: Setting scan request: 0.100000 sec | |
| TDLS: TDLS operation not supported by driver | |
| TDLS: Driver uses internal link setup | |
| TDLS: Driver does not support TDLS channel switching | |
| wlp1s0b1: WPS: UUID based on MAC address: e909a86f-b1a7-5277-89e0-0bfd7fd694fd | |
| ENGINE: Loading dynamic engine | |
| ENGINE: Loading dynamic engine | |
| EAPOL: SUPP_PAE entering state DISCONNECTED | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Skip set_supp_port(unauthorized) while not associated | |
| EAPOL: KEY_RX entering state NO_KEY_RECEIVE | |
| EAPOL: SUPP_BE entering state INITIALIZE | |
| EAP: EAP entering state DISABLED | |
| wlp1s0b1: Added interface wlp1s0b1 | |
| wlp1s0b1: State: DISCONNECTED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Add radio work 'scan'@0x1e2a1c0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1e2a1c0 after 0.000022 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 | |
| Scan requested (ret=0) - scan timeout 10 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000056 seconds | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.662923 seconds | |
| nl80211: Received scan results (4 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 1 | |
| wlp1s0b1: BSS: Add new id 0 BSSID 00:3a:99:04:bf:42 SSID 'eduroam' freq 2437 | |
| wlp1s0b1: BSS: Add new id 1 BSSID 00:3a:99:04:bf:43 SSID 'test' freq 2437 | |
| wlp1s0b1: BSS: Add new id 2 BSSID 00:3a:98:f5:90:e2 SSID 'eduroam' freq 2412 | |
| wlp1s0b1: BSS: Add new id 3 BSSID 00:3a:9a:00:7c:12 SSID 'eduroam' freq 2437 | |
| BSS: last_scan_res_used=4/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1e2a1c0 done in 0.663755 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-57 freq=2437 | |
| wlp1s0b1: selected based on RSN IE | |
| wlp1s0b1: selected BSS 00:3a:99:04:bf:42 ssid='eduroam' | |
| wlp1s0b1: Considering connect request: reassociate: 0 selected: 00:3a:99:04:bf:42 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x1e0bdf0 current_ssid=(nil) | |
| wlp1s0b1: Request association with 00:3a:99:04:bf:42 | |
| wlp1s0b1: Add radio work 'sme-connect'@0x1e2a1c0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'sme-connect'@0x1e2a1c0 after 0.000034 second wait | |
| wlp1s0b1: Automatic auth_alg selection: 0x1 | |
| RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 | |
| RSN: Search for BSSID 00:3a:99:04:bf:42 | |
| RSN: No PMKSA cache entry found | |
| wlp1s0b1: RSN: using IEEE 802.11i/D9.0 | |
| wlp1s0b1: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 | |
| wlp1s0b1: WPA: Selected mgmt group cipher 32 | |
| wlp1s0b1: WPA: clearing AP WPA IE | |
| WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| wlp1s0b1: WPA: using GTK TKIP | |
| wlp1s0b1: WPA: using PTK CCMP | |
| wlp1s0b1: WPA: using KEY_MGMT 802.1X | |
| wlp1s0b1: WPA: not using MGMT group cipher | |
| WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| RRM: Determining whether RRM can be used - device support: 0x0 | |
| RRM: No RRM in network | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: SME: Trying to authenticate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2437 MHz) | |
| wlp1s0b1: State: SCANNING -> AUTHENTICATING | |
| EAPOL: External notification - EAP success=0 | |
| EAPOL: External notification - EAP fail=0 | |
| EAPOL: External notification - portControl=Auto | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| nl80211: Authenticate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2437 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=0): [NULL] | |
| * Auth Type 0 | |
| nl80211: Authentication request send successfully | |
| nl80211: Event message available | |
| nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0b1 | |
| nl80211: New station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 70 38 00 00 02 00 00 00 | |
| nl80211: Authenticate event | |
| wlp1s0b1: Event AUTH (11) received | |
| wlp1s0b1: SME: Authentication response: peer=00:3a:99:04:bf:42 auth_type=0 auth_transaction=2 status_code=0 | |
| SME: Authentication response IEs - hexdump(len=0): [NULL] | |
| wlp1s0b1: set_disable_max_amsdu: -1 | |
| wlp1s0b1: set_ampdu_factor: -1 | |
| wlp1s0b1: set_ampdu_density: -1 | |
| wlp1s0b1: set_disable_ht40: 0 | |
| wlp1s0b1: set_disable_sgi: 0 | |
| wlp1s0b1: set_disable_ldpc: 0 | |
| wlp1s0b1: Trying to associate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2437 MHz) | |
| wlp1s0b1: State: AUTHENTICATING -> ASSOCIATING | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| nl80211: Associate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2437 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 7f 08 00 00 00 00 00 00 00 40 | |
| * WPA Versions 0x2 | |
| * pairwise=0xfac04 | |
| * group=0xfac02 | |
| * akm=0xfac01 | |
| * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| nl80211: Association request send successfully | |
| nl80211: Event message available | |
| nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp1s0b1 | |
| nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=72): 10 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 80 38 31 00 00 00 4e c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| nl80211: Associate event | |
| wlp1s0b1: Event ASSOC (0) received | |
| wlp1s0b1: Association info event | |
| resp_ies - hexdump(len=42): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: freq=2437 MHz | |
| wlp1s0b1: State: ASSOCIATING -> ASSOCIATED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| wlp1s0b1: Associated to a new BSS: BSSID=00:3a:99:04:bf:42 | |
| wlp1s0b1: Associated with 00:3a:99:04:bf:42 | |
| wlp1s0b1: WPA: Association event - clear replay counter | |
| wlp1s0b1: WPA: Clear old PTK | |
| TDLS: Remove peers on association | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| EAPOL: External notification - portEnabled=1 | |
| EAPOL: SUPP_PAE entering state CONNECTING | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| wlp1s0b1: Setting authentication timeout: 10 sec 0 usec | |
| wlp1s0b1: Cancelling scan request | |
| WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0 | |
| WMM AC: U-APSD queues=0x0 | |
| WMM AC: Valid WMM association, WMM AC is enabled | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp1s0b1 | |
| nl80211: Ignore connect event (cmd=46) when using userspace SME | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Setting authentication timeout: 70 sec 0 usec | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_PAE entering state RESTART | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_PAE entering state AUTHENTICATING | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state IDENTITY | |
| wlp1s0b1: CTRL-EVENT-EAP-STARTED EAP authentication started | |
| EAP: Status notification: started (param=) | |
| EAP: EAP-Request Identity data - hexdump_ascii(len=41): | |
| 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f _networkid=eduro | |
| 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c am,nasid=WiFi-B, | |
| 70 6f 72 74 69 64 3d 32 39 portid=29 | |
| EAP: using real identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:99:04:bf:42 | |
| TX EAPOL - hexdump(len=21): 01 00 00 11 02 01 00 11 01 66 70 6d 2e 53 69 6e 79 61 6b 53 41 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| nl80211: Event message available | |
| nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0b1 | |
| nl80211: Delete station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=00:3a:99:04:bf:42 A2=74:2f:68:d2:b1:f3 | |
| nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 00 3a 99 04 bf 42 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 00 03 00 | |
| nl80211: Deauthenticate event | |
| wlp1s0b1: Event DEAUTH (12) received | |
| wlp1s0b1: Deauthentication notification | |
| wlp1s0b1: * reason 3 (locally generated) | |
| wlp1s0b1: * address 00:3a:99:04:bf:42 | |
| Deauthentication frame IE(s) - hexdump(len=0): [NULL] | |
| wlp1s0b1: CTRL-EVENT-DISCONNECTED bssid=00:3a:99:04:bf:42 reason=3 locally_generated=1 | |
| wlp1s0b1: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=6) | |
| wlp1s0b1: Setting scan request: 0.100000 sec | |
| wlp1s0b1: Radio work 'sme-connect'@0x1e2a1c0 done in 0.015894 seconds | |
| Added BSSID 00:3a:99:04:bf:42 into blacklist | |
| wlp1s0b1: Another BSS in this ESS has been seen; try it next | |
| BSSID 00:3a:99:04:bf:42 blacklist count incremented to 2 | |
| wlp1s0b1: Blacklist count 1 --> request scan in 100 ms | |
| wlp1s0b1: Ignore new scan request for 0.100000 sec since an earlier request is scheduled to trigger sooner | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Disconnect event - remove keys | |
| wlp1s0b1: State: ASSOCIATED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WMM AC: WMM AC is disabled | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: SUPP_PAE entering state DISCONNECTED | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Skip set_supp_port(unauthorized) while not associated | |
| EAPOL: SUPP_BE entering state INITIALIZE | |
| EAP: EAP entering state DISABLED | |
| EAPOL: External notification - portValid=0 | |
| nl80211: Event message available | |
| nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp1s0b1 | |
| nl80211: Ignore disconnect event when using userspace SME | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=0 | |
| * type=1 | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD | |
| wlp1s0b1: Updating hw mode | |
| nl80211: Regulatory information - country=00 | |
| nl80211: 2402-2472 @ 40 MHz 20 mBm | |
| nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR) | |
| nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR) | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 57240-63720 @ 2160 MHz 0 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=1 | |
| * type=0 | |
| * alpha2=BY | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=BY | |
| wlp1s0b1: Updating hw mode | |
| nl80211: Regulatory information - country=BY (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) | |
| nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Optimize scan based on previously generated frequency list | |
| wlp1s0b1: Add radio work 'scan'@0x1e2ac60 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1e2ac60 after 0.000017 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 | |
| nl80211: Scan frequency 2412 MHz | |
| nl80211: Scan frequency 2437 MHz | |
| nl80211: Scan trigger failed: ret=-16 (Device or resource busy) | |
| wlp1s0b1: State: SCANNING -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| wlp1s0b1: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1 | |
| wlp1s0b1: Radio work 'scan'@0x1e2ac60 done in 0.000218 seconds | |
| wlp1s0b1: Setting scan request: 1.000000 sec | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: External program started a scan | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.658763 seconds | |
| nl80211: Received scan results (5 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 2 | |
| wlp1s0b1: BSS: Add new id 4 BSSID 00:3a:99:d2:5a:43 SSID 'test' freq 2412 | |
| BSS: last_scan_res_used=5/32 | |
| wlp1s0b1: New scan results available (own=0 ext=1) | |
| wlp1s0b1: Do not use results from externally requested scan operation for network selection | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: External program started a scan | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Add radio work 'scan'@0x1e2b510 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| Delay radio work start until externally triggered scan completes | |
| EAPOL: startWhen --> 0 | |
| EAPOL: disable timer tick | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.661269 seconds | |
| nl80211: Received scan results (5 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 3 | |
| BSS: last_scan_res_used=5/32 | |
| wlp1s0b1: New scan results available (own=0 ext=1) | |
| wlp1s0b1: Do not use results from externally requested scan operation for network selection | |
| wlp1s0b1: Starting radio work 'scan'@0x1e2b510 after 0.322617 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000058 seconds | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.661401 seconds | |
| nl80211: Received scan results (5 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 4 | |
| BSS: last_scan_res_used=5/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1e2b510 done in 0.662764 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-60 freq=2437 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-62 freq=2437 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: 2: 00:3a:99:d2:5a:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-79 freq=2412 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 3: 00:3a:98:f5:90:e2 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-81 freq=2412 | |
| wlp1s0b1: selected based on RSN IE | |
| wlp1s0b1: selected BSS 00:3a:98:f5:90:e2 ssid='eduroam' | |
| wlp1s0b1: Considering connect request: reassociate: 0 selected: 00:3a:98:f5:90:e2 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x1e0bdf0 current_ssid=(nil) | |
| wlp1s0b1: Request association with 00:3a:98:f5:90:e2 | |
| wlp1s0b1: Re-association to the same ESS | |
| wlp1s0b1: Add radio work 'sme-connect'@0x1e2b510 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| RSN: Ignored PMKID candidate without preauth flag | |
| RSN: Ignored PMKID candidate without preauth flag | |
| wlp1s0b1: Starting radio work 'sme-connect'@0x1e2b510 after 0.000028 second wait | |
| wlp1s0b1: Automatic auth_alg selection: 0x1 | |
| RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 | |
| RSN: Search for BSSID 00:3a:98:f5:90:e2 | |
| RSN: No PMKSA cache entry found | |
| wlp1s0b1: RSN: using IEEE 802.11i/D9.0 | |
| wlp1s0b1: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 | |
| wlp1s0b1: WPA: Selected mgmt group cipher 32 | |
| wlp1s0b1: WPA: clearing AP WPA IE | |
| WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| wlp1s0b1: WPA: using GTK TKIP | |
| wlp1s0b1: WPA: using PTK CCMP | |
| wlp1s0b1: WPA: using KEY_MGMT 802.1X | |
| wlp1s0b1: WPA: not using MGMT group cipher | |
| WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| RRM: Determining whether RRM can be used - device support: 0x0 | |
| RRM: No RRM in network | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: SME: Trying to authenticate with 00:3a:98:f5:90:e2 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: SCANNING -> AUTHENTICATING | |
| EAPOL: External notification - EAP success=0 | |
| EAPOL: External notification - EAP fail=0 | |
| EAPOL: External notification - portControl=Auto | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| nl80211: Authenticate (ifindex=2) | |
| * bssid=00:3a:98:f5:90:e2 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=0): [NULL] | |
| * Auth Type 0 | |
| nl80211: Authentication request send successfully | |
| nl80211: Event message available | |
| nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0b1 | |
| nl80211: New station 00:3a:98:f5:90:e2 | |
| nl80211: Event message available | |
| nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:98:f5:90:e2 | |
| nl80211: MLME event frame - hexdump(len=30): b0 08 3a 01 74 2f 68 d2 b1 f3 00 3a 98 f5 90 e2 00 3a 98 f5 90 e2 b0 cb 00 00 02 00 00 00 | |
| nl80211: Authenticate event | |
| wlp1s0b1: Event AUTH (11) received | |
| wlp1s0b1: SME: Authentication response: peer=00:3a:98:f5:90:e2 auth_type=0 auth_transaction=2 status_code=0 | |
| SME: Authentication response IEs - hexdump(len=0): [NULL] | |
| wlp1s0b1: set_disable_max_amsdu: -1 | |
| wlp1s0b1: set_ampdu_factor: -1 | |
| wlp1s0b1: set_ampdu_density: -1 | |
| wlp1s0b1: set_disable_ht40: 0 | |
| wlp1s0b1: set_disable_sgi: 0 | |
| wlp1s0b1: set_disable_ldpc: 0 | |
| wlp1s0b1: Trying to associate with 00:3a:98:f5:90:e2 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: AUTHENTICATING -> ASSOCIATING | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| nl80211: Associate (ifindex=2) | |
| * bssid=00:3a:98:f5:90:e2 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 7f 08 00 00 00 00 00 00 00 40 | |
| * WPA Versions 0x2 | |
| * pairwise=0xfac04 | |
| * group=0xfac02 | |
| * akm=0xfac01 | |
| * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| nl80211: Association request send successfully | |
| l2_packet_receive: src=00:3a:98:f5:90:e2 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:98:f5:90:e2 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00) | |
| nl80211: Event message available | |
| nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp1s0b1 | |
| nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:98:f5:90:e2 | |
| nl80211: MLME event frame - hexdump(len=72): 10 08 3a 01 74 2f 68 d2 b1 f3 00 3a 98 f5 90 e2 00 3a 98 f5 90 e2 30 cc 31 00 00 00 19 c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| nl80211: Associate event | |
| wlp1s0b1: Event ASSOC (0) received | |
| wlp1s0b1: Association info event | |
| resp_ies - hexdump(len=42): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: freq=2412 MHz | |
| wlp1s0b1: State: ASSOCIATING -> ASSOCIATED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| wlp1s0b1: Associated to a new BSS: BSSID=00:3a:98:f5:90:e2 | |
| wlp1s0b1: Associated with 00:3a:98:f5:90:e2 | |
| wlp1s0b1: WPA: Association event - clear replay counter | |
| wlp1s0b1: WPA: Clear old PTK | |
| TDLS: Remove peers on association | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| EAPOL: External notification - portEnabled=1 | |
| EAPOL: SUPP_PAE entering state CONNECTING | |
| EAPOL: enable timer tick | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| wlp1s0b1: Setting authentication timeout: 10 sec 0 usec | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: Process pending EAPOL frame that was received just before association notification | |
| wlp1s0b1: RX EAPOL from 00:3a:98:f5:90:e2 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Setting authentication timeout: 70 sec 0 usec | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_PAE entering state RESTART | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_PAE entering state AUTHENTICATING | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state IDENTITY | |
| wlp1s0b1: CTRL-EVENT-EAP-STARTED EAP authentication started | |
| EAP: Status notification: started (param=) | |
| EAP: EAP-Request Identity data - hexdump_ascii(len=41): | |
| 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f _networkid=eduro | |
| 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c am,nasid=WiFi-B, | |
| 70 6f 72 74 69 64 3d 32 39 portid=29 | |
| EAP: using real identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:98:f5:90:e2 | |
| TX EAPOL - hexdump(len=21): 01 00 00 11 02 01 00 11 01 66 70 6d 2e 53 69 6e 79 61 6b 53 41 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0 | |
| WMM AC: U-APSD queues=0x0 | |
| WMM AC: Valid WMM association, WMM AC is enabled | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp1s0b1 | |
| nl80211: Ignore connect event (cmd=46) when using userspace SME | |
| l2_packet_receive: src=00:3a:98:f5:90:e2 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:98:f5:90:e2 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c 70 6f 72 74 69 64 3d 32 39 | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state RETRANSMIT | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:98:f5:90:e2 | |
| TX EAPOL - hexdump(len=21): 01 00 00 11 02 01 00 11 01 66 70 6d 2e 53 69 6e 79 61 6b 53 41 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| l2_packet_receive: src=00:3a:98:f5:90:e2 len=10 | |
| wlp1s0b1: RX EAPOL from 00:3a:98:f5:90:e2 | |
| RX EAPOL - hexdump(len=10): 02 00 00 06 01 02 00 06 19 20 | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=2 method=25 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state GET_METHOD | |
| wlp1s0b1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25 | |
| EAP: Status notification: accept proposed method (param=PEAP) | |
| EAP: Initialize selected EAP method: vendor 0 method 25 (PEAP) | |
| TLS: Phase2 EAP types - hexdump(len=8): 00 00 00 00 1a 00 00 00 | |
| TLS: using phase1 config options | |
| wlp1s0b1: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected | |
| EAP: EAP entering state METHOD | |
| SSL: Received packet(len=6) - Flags 0x20 | |
| EAP-PEAP: Start (server ver=0, own ver=1) | |
| EAP-PEAP: Using PEAP version 0 | |
| SSL: (where=0x10 ret=0x1) | |
| SSL: (where=0x1001 ret=0x1) | |
| SSL: SSL_connect:before/connect initialization | |
| OpenSSL: TX ver=0x301 content_type=256 | |
| OpenSSL: Message - hexdump(len=5): [REMOVED] | |
| OpenSSL: TX ver=0x301 content_type=22 | |
| OpenSSL: Message - hexdump(len=226): [REMOVED] | |
| SSL: (where=0x1001 ret=0x1) | |
| SSL: SSL_connect:SSLv2/v3 write client hello A | |
| SSL: (where=0x1002 ret=0xffffffff) | |
| SSL: SSL_connect:error in SSLv2/v3 read server hello A | |
| SSL: SSL_connect - want more data | |
| SSL: 231 bytes pending from ssl_out | |
| SSL: 231 bytes left to be sent out (of total 231 bytes) | |
| EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=FAIL eapRespData=0x1e27cc0 | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:98:f5:90:e2 | |
| TX EAPOL - hexdump(len=245): 01 00 00 f1 02 02 00 f1 19 80 00 00 00 e7 16 03 01 00 e2 01 00 00 de 03 01 7b 77 92 b2 d5 e3 54 21 07 6d dd 27 91 31 56 e7 a7 19 a3 a4 a0 48 f9 15 36 ae 59 be c1 9d bb 85 00 00 64 c0 14 c0 0a 00 39 00 38 00 37 00 36 00 88 00 87 00 86 00 85 c0 0f c0 05 00 35 00 84 c0 13 c0 09 00 33 00 32 00 31 00 30 00 9a 00 99 00 98 00 97 00 45 00 44 00 43 00 42 c0 0e c0 04 00 2f 00 96 00 41 00 07 c0 11 c0 07 c0 0c c0 02 00 05 00 04 c0 12 c0 08 00 16 00 13 00 10 00 0d c0 0d c0 03 00 0a 00 ff 01 00 00 51 00 0b 00 04 03 00 01 02 00 0a 00 1c 00 1a 00 17 00 19 00 1c 00 1b 00 18 00 1a 00 16 00 0e 00 0d 00 0b 00 0c 00 09 00 0a 00 0d 00 20 00 1e 06 01 06 02 06 03 05 01 05 02 05 03 04 01 04 02 04 03 03 01 03 02 03 03 02 01 02 02 02 03 00 0f 00 01 01 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| nl80211: Event message available | |
| nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0b1 | |
| nl80211: Delete station 00:3a:98:f5:90:e2 | |
| nl80211: Event message available | |
| nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=00:3a:98:f5:90:e2 A2=74:2f:68:d2:b1:f3 | |
| nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 00 3a 98 f5 90 e2 74 2f 68 d2 b1 f3 00 3a 98 f5 90 e2 00 00 03 00 | |
| nl80211: Deauthenticate event | |
| wlp1s0b1: Event DEAUTH (12) received | |
| wlp1s0b1: Deauthentication notification | |
| wlp1s0b1: * reason 3 (locally generated) | |
| wlp1s0b1: * address 00:3a:98:f5:90:e2 | |
| Deauthentication frame IE(s) - hexdump(len=0): [NULL] | |
| wlp1s0b1: CTRL-EVENT-DISCONNECTED bssid=00:3a:98:f5:90:e2 reason=3 locally_generated=1 | |
| wlp1s0b1: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=6) | |
| wlp1s0b1: Setting scan request: 0.100000 sec | |
| wlp1s0b1: Radio work 'sme-connect'@0x1e2b510 done in 0.570352 seconds | |
| Added BSSID 00:3a:98:f5:90:e2 into blacklist | |
| wlp1s0b1: Another BSS in this ESS has been seen; try it next | |
| BSSID 00:3a:98:f5:90:e2 blacklist count incremented to 2 | |
| wlp1s0b1: Blacklist count 1 --> request scan in 100 ms | |
| wlp1s0b1: Ignore new scan request for 0.100000 sec since an earlier request is scheduled to trigger sooner | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Disconnect event - remove keys | |
| wlp1s0b1: State: ASSOCIATED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WMM AC: WMM AC is disabled | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: SUPP_PAE entering state DISCONNECTED | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Skip set_supp_port(unauthorized) while not associated | |
| EAPOL: SUPP_BE entering state INITIALIZE | |
| EAP: EAP entering state DISABLED | |
| EAPOL: External notification - portValid=0 | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp1s0b1 | |
| nl80211: Ignore disconnect event when using userspace SME | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=0 | |
| * type=1 | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD | |
| wlp1s0b1: Updating hw mode | |
| nl80211: Regulatory information - country=00 | |
| nl80211: 2402-2472 @ 40 MHz 20 mBm | |
| nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR) | |
| nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR) | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 57240-63720 @ 2160 MHz 0 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=1 | |
| * type=0 | |
| * alpha2=BY | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=BY | |
| wlp1s0b1: Updating hw mode | |
| nl80211: Regulatory information - country=BY (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) | |
| nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Optimize scan based on previously generated frequency list | |
| wlp1s0b1: Add radio work 'scan'@0x1e2ace0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: External program started a scan | |
| Delay radio work start until externally triggered scan completes | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.658923 seconds | |
| nl80211: Received scan results (6 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 5 | |
| wlp1s0b1: BSS: Add new id 5 BSSID 00:3a:99:04:a4:23 SSID 'test' freq 2437 | |
| BSS: last_scan_res_used=6/32 | |
| wlp1s0b1: New scan results available (own=0 ext=1) | |
| wlp1s0b1: Do not use results from externally requested scan operation for network selection | |
| wlp1s0b1: Starting radio work 'scan'@0x1e2ace0 after 0.659213 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 | |
| nl80211: Scan frequency 2437 MHz | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000034 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2437 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.063442 seconds | |
| nl80211: Received scan results (6 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 6 | |
| BSS: last_scan_res_used=6/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1e2ace0 done in 0.064974 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-58 freq=2437 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-59 freq=2437 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: 2: 00:3a:99:04:a4:23 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-78 freq=2437 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 3: 00:3a:99:d2:5a:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-79 freq=2412 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 4: 00:3a:98:f5:90:e2 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-81 freq=2412 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: 5: 00:3a:9a:00:7c:12 ssid='eduroam' wpa_ie_len=32 rsn_ie_len=28 caps=0x31 level=-82 freq=2437 | |
| wlp1s0b1: selected based on RSN IE | |
| wlp1s0b1: selected BSS 00:3a:9a:00:7c:12 ssid='eduroam' | |
| wlp1s0b1: Considering connect request: reassociate: 0 selected: 00:3a:9a:00:7c:12 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x1e0bdf0 current_ssid=(nil) | |
| wlp1s0b1: Request association with 00:3a:9a:00:7c:12 | |
| wlp1s0b1: Re-association to the same ESS | |
| wlp1s0b1: Add radio work 'sme-connect'@0x1e2ace0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| RSN: Ignored PMKID candidate without preauth flag | |
| RSN: Ignored PMKID candidate without preauth flag | |
| wlp1s0b1: Starting radio work 'sme-connect'@0x1e2ace0 after 0.000028 second wait | |
| wlp1s0b1: Automatic auth_alg selection: 0x1 | |
| RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 | |
| RSN: Search for BSSID 00:3a:9a:00:7c:12 | |
| RSN: No PMKSA cache entry found | |
| wlp1s0b1: RSN: using IEEE 802.11i/D9.0 | |
| wlp1s0b1: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 | |
| wlp1s0b1: WPA: Selected mgmt group cipher 32 | |
| WPA: set AP WPA IE - hexdump(len=34): dd 20 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 02 00 00 50 f2 01 00 40 96 00 00 00 | |
| WPA: set AP RSN IE - hexdump(len=30): 30 1c 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 02 00 00 0f ac 01 00 40 96 00 28 00 | |
| wlp1s0b1: WPA: using GTK TKIP | |
| wlp1s0b1: WPA: using PTK CCMP | |
| wlp1s0b1: WPA: using KEY_MGMT 802.1X | |
| wlp1s0b1: WPA: not using MGMT group cipher | |
| WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| RRM: Determining whether RRM can be used - device support: 0x0 | |
| RRM: No RRM in network | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: SME: Trying to authenticate with 00:3a:9a:00:7c:12 (SSID='eduroam' freq=2437 MHz) | |
| wlp1s0b1: State: SCANNING -> AUTHENTICATING | |
| EAPOL: External notification - EAP success=0 | |
| EAPOL: External notification - EAP fail=0 | |
| EAPOL: External notification - portControl=Auto | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| nl80211: Authenticate (ifindex=2) | |
| * bssid=00:3a:9a:00:7c:12 | |
| * freq=2437 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=0): [NULL] | |
| * Auth Type 0 | |
| nl80211: Authentication request send successfully | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0b1 | |
| nl80211: New station 00:3a:9a:00:7c:12 | |
| nl80211: Event message available | |
| nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:9a:00:7c:12 | |
| nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 74 2f 68 d2 b1 f3 00 3a 9a 00 7c 12 00 3a 9a 00 7c 12 10 d9 00 00 02 00 00 00 | |
| nl80211: Authenticate event | |
| wlp1s0b1: Event AUTH (11) received | |
| wlp1s0b1: SME: Authentication response: peer=00:3a:9a:00:7c:12 auth_type=0 auth_transaction=2 status_code=0 | |
| SME: Authentication response IEs - hexdump(len=0): [NULL] | |
| wlp1s0b1: set_disable_max_amsdu: -1 | |
| wlp1s0b1: set_ampdu_factor: -1 | |
| wlp1s0b1: set_ampdu_density: -1 | |
| wlp1s0b1: set_disable_ht40: 0 | |
| wlp1s0b1: set_disable_sgi: 0 | |
| wlp1s0b1: set_disable_ldpc: 0 | |
| wlp1s0b1: Trying to associate with 00:3a:9a:00:7c:12 (SSID='eduroam' freq=2437 MHz) | |
| wlp1s0b1: State: AUTHENTICATING -> ASSOCIATING | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| nl80211: Associate (ifindex=2) | |
| * bssid=00:3a:9a:00:7c:12 | |
| * freq=2437 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 7f 08 00 00 00 00 00 00 00 40 | |
| * WPA Versions 0x2 | |
| * pairwise=0xfac04 | |
| * group=0xfac02 | |
| * akm=0xfac01 | |
| * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| nl80211: Association request send successfully | |
| l2_packet_receive: src=00:3a:9a:00:7c:12 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:9a:00:7c:12 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 41 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00) | |
| l2_packet_receive: src=00:3a:9a:00:7c:12 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:9a:00:7c:12 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 41 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00) | |
| l2_packet_receive: src=00:3a:9a:00:7c:12 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:9a:00:7c:12 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 41 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00) | |
| nl80211: Event message available | |
| nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0b1 | |
| nl80211: Delete station 00:3a:9a:00:7c:12 | |
| nl80211: Event message available | |
| nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp1s0b1 | |
| nl80211: MLME event 38; timeout with 00:3a:9a:00:7c:12 | |
| wlp1s0b1: Event ASSOC_TIMED_OUT (15) received | |
| wlp1s0b1: SME: Association timed out | |
| wlp1s0b1: Radio work 'sme-connect'@0x1e2ace0 done in 0.414523 seconds | |
| Added BSSID 00:3a:9a:00:7c:12 into blacklist | |
| wlp1s0b1: Blacklist count 1 --> request scan in 100 ms | |
| wlp1s0b1: Setting scan request: 0.100000 sec | |
| wlp1s0b1: State: ASSOCIATING -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Add radio work 'scan'@0x1e2ace0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1e2ace0 after 0.000017 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000040 seconds | |
| EAPOL: startWhen --> 0 | |
| EAPOL: disable timer tick | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.661118 seconds | |
| nl80211: Received scan results (5 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 7 | |
| BSS: last_scan_res_used=5/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1e2ace0 done in 0.661568 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-59 freq=2437 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-60 freq=2437 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: 2: 00:3a:99:04:a4:23 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-78 freq=2437 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 3: 00:3a:99:d2:5a:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-80 freq=2412 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 4: 00:3a:98:f5:90:e2 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-81 freq=2412 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: No APs found - clear blacklist and try again | |
| Removed BSSID 00:3a:9a:00:7c:12 from blacklist (clear) | |
| Removed BSSID 00:3a:98:f5:90:e2 from blacklist (clear) | |
| Removed BSSID 00:3a:99:04:bf:42 from blacklist (clear) | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-59 freq=2437 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 1: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-60 freq=2437 | |
| wlp1s0b1: selected based on RSN IE | |
| wlp1s0b1: selected BSS 00:3a:99:04:bf:42 ssid='eduroam' | |
| wlp1s0b1: Considering connect request: reassociate: 0 selected: 00:3a:99:04:bf:42 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x1e0bdf0 current_ssid=(nil) | |
| wlp1s0b1: Request association with 00:3a:99:04:bf:42 | |
| wlp1s0b1: Re-association to the same ESS | |
| wlp1s0b1: Add radio work 'sme-connect'@0x1e2ace0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| RSN: Ignored PMKID candidate without preauth flag | |
| RSN: Ignored PMKID candidate without preauth flag | |
| wlp1s0b1: Starting radio work 'sme-connect'@0x1e2ace0 after 0.000030 second wait | |
| wlp1s0b1: Automatic auth_alg selection: 0x1 | |
| RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 | |
| RSN: Search for BSSID 00:3a:99:04:bf:42 | |
| RSN: No PMKSA cache entry found | |
| wlp1s0b1: RSN: using IEEE 802.11i/D9.0 | |
| wlp1s0b1: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 | |
| wlp1s0b1: WPA: Selected mgmt group cipher 32 | |
| wlp1s0b1: WPA: clearing AP WPA IE | |
| WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| wlp1s0b1: WPA: using GTK TKIP | |
| wlp1s0b1: WPA: using PTK CCMP | |
| wlp1s0b1: WPA: using KEY_MGMT 802.1X | |
| wlp1s0b1: WPA: not using MGMT group cipher | |
| WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| RRM: Determining whether RRM can be used - device support: 0x0 | |
| RRM: No RRM in network | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: SME: Trying to authenticate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2437 MHz) | |
| wlp1s0b1: State: SCANNING -> AUTHENTICATING | |
| EAPOL: External notification - EAP success=0 | |
| EAPOL: External notification - EAP fail=0 | |
| EAPOL: External notification - portControl=Auto | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| nl80211: Authenticate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2437 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=0): [NULL] | |
| * Auth Type 0 | |
| nl80211: Authentication request send successfully | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: External program started a scan | |
| nl80211: Event message available | |
| nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0b1 | |
| nl80211: New station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 35 (NL80211_CMD_SCAN_ABORTED) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan aborted | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.000104 seconds | |
| nl80211: Received scan results (5 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 8 | |
| wlp1s0b1: BSS: Remove id 3 BSSID 00:3a:9a:00:7c:12 SSID 'eduroam' due to no match in scan | |
| BSS: last_scan_res_used=5/32 | |
| wlp1s0b1: New scan results available (own=0 ext=1) | |
| wlp1s0b1: Do not use results from externally requested scan operation for network selection | |
| nl80211: Event message available | |
| nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 30 40 00 00 02 00 00 00 | |
| nl80211: Authenticate event | |
| wlp1s0b1: Event AUTH (11) received | |
| wlp1s0b1: SME: Authentication response: peer=00:3a:99:04:bf:42 auth_type=0 auth_transaction=2 status_code=0 | |
| SME: Authentication response IEs - hexdump(len=0): [NULL] | |
| wlp1s0b1: set_disable_max_amsdu: -1 | |
| wlp1s0b1: set_ampdu_factor: -1 | |
| wlp1s0b1: set_ampdu_density: -1 | |
| wlp1s0b1: set_disable_ht40: 0 | |
| wlp1s0b1: set_disable_sgi: 0 | |
| wlp1s0b1: set_disable_ldpc: 0 | |
| wlp1s0b1: Trying to associate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2437 MHz) | |
| wlp1s0b1: State: AUTHENTICATING -> ASSOCIATING | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| nl80211: Associate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2437 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 7f 08 00 00 00 00 00 00 00 40 | |
| * WPA Versions 0x2 | |
| * pairwise=0xfac04 | |
| * group=0xfac02 | |
| * akm=0xfac01 | |
| * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| nl80211: Association request send successfully | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp1s0b1 | |
| nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=72): 10 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 40 40 31 00 00 00 4e c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| nl80211: Associate event | |
| wlp1s0b1: Event ASSOC (0) received | |
| wlp1s0b1: Association info event | |
| resp_ies - hexdump(len=42): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: freq=2437 MHz | |
| wlp1s0b1: State: ASSOCIATING -> ASSOCIATED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| wlp1s0b1: Associated to a new BSS: BSSID=00:3a:99:04:bf:42 | |
| wlp1s0b1: Associated with 00:3a:99:04:bf:42 | |
| wlp1s0b1: WPA: Association event - clear replay counter | |
| wlp1s0b1: WPA: Clear old PTK | |
| TDLS: Remove peers on association | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| EAPOL: External notification - portEnabled=1 | |
| EAPOL: SUPP_PAE entering state CONNECTING | |
| EAPOL: enable timer tick | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAP: EAP entering state INITIALIZE | |
| EAP: deinitialize previously used EAP method (25, PEAP) at INITIALIZE | |
| ENGINE: engine deinit | |
| EAP: EAP entering state IDLE | |
| wlp1s0b1: Setting authentication timeout: 10 sec 0 usec | |
| wlp1s0b1: Cancelling scan request | |
| WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0 | |
| WMM AC: U-APSD queues=0x0 | |
| WMM AC: Valid WMM association, WMM AC is enabled | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Setting authentication timeout: 70 sec 0 usec | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_PAE entering state RESTART | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_PAE entering state AUTHENTICATING | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state IDENTITY | |
| wlp1s0b1: CTRL-EVENT-EAP-STARTED EAP authentication started | |
| EAP: Status notification: started (param=) | |
| EAP: EAP-Request Identity data - hexdump_ascii(len=41): | |
| 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f _networkid=eduro | |
| 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c am,nasid=WiFi-B, | |
| 70 6f 72 74 69 64 3d 32 39 portid=29 | |
| EAP: using real identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:99:04:bf:42 | |
| TX EAPOL - hexdump(len=21): 01 00 00 11 02 01 00 11 01 66 70 6d 2e 53 69 6e 79 61 6b 53 41 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| nl80211: Event message available | |
| nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp1s0b1 | |
| nl80211: Ignore connect event (cmd=46) when using userspace SME | |
| nl80211: Event message available | |
| nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0b1 | |
| nl80211: Delete station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=00:3a:99:04:bf:42 A2=74:2f:68:d2:b1:f3 | |
| nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 00 3a 99 04 bf 42 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 00 03 00 | |
| nl80211: Deauthenticate event | |
| wlp1s0b1: Event DEAUTH (12) received | |
| wlp1s0b1: Deauthentication notification | |
| wlp1s0b1: * reason 3 (locally generated) | |
| wlp1s0b1: * address 00:3a:99:04:bf:42 | |
| Deauthentication frame IE(s) - hexdump(len=0): [NULL] | |
| wlp1s0b1: CTRL-EVENT-DISCONNECTED bssid=00:3a:99:04:bf:42 reason=3 locally_generated=1 | |
| wlp1s0b1: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=6) | |
| wlp1s0b1: Setting scan request: 0.100000 sec | |
| wlp1s0b1: Radio work 'sme-connect'@0x1e2ace0 done in 0.024203 seconds | |
| Added BSSID 00:3a:99:04:bf:42 into blacklist | |
| wlp1s0b1: Another BSS in this ESS has been seen; try it next | |
| BSSID 00:3a:99:04:bf:42 blacklist count incremented to 2 | |
| wlp1s0b1: Blacklist count 3 --> request scan in 1000 ms | |
| wlp1s0b1: Ignore new scan request for 1.000000 sec since an earlier request is scheduled to trigger sooner | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Disconnect event - remove keys | |
| wlp1s0b1: State: ASSOCIATED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WMM AC: WMM AC is disabled | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: SUPP_PAE entering state DISCONNECTED | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Skip set_supp_port(unauthorized) while not associated | |
| EAPOL: SUPP_BE entering state INITIALIZE | |
| EAP: EAP entering state DISABLED | |
| EAPOL: External notification - portValid=0 | |
| nl80211: Event message available | |
| nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp1s0b1 | |
| nl80211: Ignore disconnect event when using userspace SME | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=0 | |
| * type=1 | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD | |
| wlp1s0b1: Updating hw mode | |
| nl80211: Regulatory information - country=00 | |
| nl80211: 2402-2472 @ 40 MHz 20 mBm | |
| nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR) | |
| nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR) | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 57240-63720 @ 2160 MHz 0 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=1 | |
| * type=0 | |
| * alpha2=BY | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=BY | |
| wlp1s0b1: Updating hw mode | |
| nl80211: Regulatory information - country=BY (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) | |
| nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: External program started a scan | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Optimize scan based on previously generated frequency list | |
| wlp1s0b1: Add radio work 'scan'@0x1e0b7f0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| Delay radio work start until externally triggered scan completes | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.657343 seconds | |
| nl80211: Received scan results (6 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 9 | |
| wlp1s0b1: BSS: Add new id 6 BSSID 00:3a:99:d2:5a:42 SSID 'eduroam' freq 2412 | |
| BSS: last_scan_res_used=6/32 | |
| wlp1s0b1: New scan results available (own=0 ext=1) | |
| wlp1s0b1: Do not use results from externally requested scan operation for network selection | |
| wlp1s0b1: Starting radio work 'scan'@0x1e0b7f0 after 0.656971 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 | |
| nl80211: Scan frequency 2412 MHz | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000070 seconds | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.063393 seconds | |
| nl80211: Received scan results (6 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 10 | |
| BSS: last_scan_res_used=6/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1e0b7f0 done in 0.065090 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-58 freq=2437 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-59 freq=2437 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 2: 00:3a:99:04:a4:23 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-78 freq=2437 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 3: 00:3a:99:d2:5a:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-80 freq=2412 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 4: 00:3a:99:d2:5a:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-80 freq=2412 | |
| wlp1s0b1: selected based on RSN IE | |
| wlp1s0b1: selected BSS 00:3a:99:d2:5a:42 ssid='eduroam' | |
| wlp1s0b1: Considering connect request: reassociate: 0 selected: 00:3a:99:d2:5a:42 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x1e0bdf0 current_ssid=(nil) | |
| wlp1s0b1: Request association with 00:3a:99:d2:5a:42 | |
| wlp1s0b1: Re-association to the same ESS | |
| wlp1s0b1: Add radio work 'sme-connect'@0x1e0b7f0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| RSN: Ignored PMKID candidate without preauth flag | |
| RSN: Ignored PMKID candidate without preauth flag | |
| wlp1s0b1: Starting radio work 'sme-connect'@0x1e0b7f0 after 0.000027 second wait | |
| wlp1s0b1: Automatic auth_alg selection: 0x1 | |
| RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 | |
| RSN: Search for BSSID 00:3a:99:d2:5a:42 | |
| RSN: No PMKSA cache entry found | |
| wlp1s0b1: RSN: using IEEE 802.11i/D9.0 | |
| wlp1s0b1: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 | |
| wlp1s0b1: WPA: Selected mgmt group cipher 32 | |
| wlp1s0b1: WPA: clearing AP WPA IE | |
| WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| wlp1s0b1: WPA: using GTK TKIP | |
| wlp1s0b1: WPA: using PTK CCMP | |
| wlp1s0b1: WPA: using KEY_MGMT 802.1X | |
| wlp1s0b1: WPA: not using MGMT group cipher | |
| WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| RRM: Determining whether RRM can be used - device support: 0x0 | |
| RRM: No RRM in network | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: SME: Trying to authenticate with 00:3a:99:d2:5a:42 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: SCANNING -> AUTHENTICATING | |
| EAPOL: External notification - EAP success=0 | |
| EAPOL: External notification - EAP fail=0 | |
| EAPOL: External notification - portControl=Auto | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| nl80211: Authenticate (ifindex=2) | |
| * bssid=00:3a:99:d2:5a:42 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=0): [NULL] | |
| * Auth Type 0 | |
| nl80211: Authentication request send successfully | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0b1 | |
| nl80211: New station 00:3a:99:d2:5a:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:d2:5a:42 | |
| nl80211: MLME event frame - hexdump(len=30): b0 08 3a 01 74 2f 68 d2 b1 f3 00 3a 99 d2 5a 42 00 3a 99 d2 5a 42 50 cd 00 00 02 00 00 00 | |
| nl80211: Authenticate event | |
| wlp1s0b1: Event AUTH (11) received | |
| wlp1s0b1: SME: Authentication response: peer=00:3a:99:d2:5a:42 auth_type=0 auth_transaction=2 status_code=0 | |
| SME: Authentication response IEs - hexdump(len=0): [NULL] | |
| wlp1s0b1: set_disable_max_amsdu: -1 | |
| wlp1s0b1: set_ampdu_factor: -1 | |
| wlp1s0b1: set_ampdu_density: -1 | |
| wlp1s0b1: set_disable_ht40: 0 | |
| wlp1s0b1: set_disable_sgi: 0 | |
| wlp1s0b1: set_disable_ldpc: 0 | |
| wlp1s0b1: Trying to associate with 00:3a:99:d2:5a:42 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: AUTHENTICATING -> ASSOCIATING | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| nl80211: Associate (ifindex=2) | |
| * bssid=00:3a:99:d2:5a:42 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 7f 08 00 00 00 00 00 00 00 40 | |
| * WPA Versions 0x2 | |
| * pairwise=0xfac04 | |
| * group=0xfac02 | |
| * akm=0xfac01 | |
| * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| nl80211: Association request send successfully | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| EAPOL: startWhen --> 0 | |
| EAPOL: disable timer tick | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: External program started a scan | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.659404 seconds | |
| nl80211: Received scan results (6 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 11 | |
| BSS: last_scan_res_used=6/32 | |
| wlp1s0b1: New scan results available (own=0 ext=1) | |
| wlp1s0b1: Do not use results from externally requested scan operation for network selection | |
| nl80211: Event message available | |
| nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0b1 | |
| nl80211: Delete station 00:3a:99:d2:5a:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp1s0b1 | |
| nl80211: MLME event 38; timeout with 00:3a:99:d2:5a:42 | |
| wlp1s0b1: Event ASSOC_TIMED_OUT (15) received | |
| wlp1s0b1: SME: Association timed out | |
| wlp1s0b1: Radio work 'sme-connect'@0x1e0b7f0 done in 1.871416 seconds | |
| Added BSSID 00:3a:99:d2:5a:42 into blacklist | |
| wlp1s0b1: Another BSS in this ESS has been seen; try it next | |
| BSSID 00:3a:99:d2:5a:42 blacklist count incremented to 2 | |
| wlp1s0b1: Blacklist count 3 --> request scan in 1000 ms | |
| wlp1s0b1: Setting scan request: 1.000000 sec | |
| wlp1s0b1: State: ASSOCIATING -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Optimize scan based on previously generated frequency list | |
| wlp1s0b1: Add radio work 'scan'@0x1e2a1c0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1e2a1c0 after 0.000016 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 | |
| nl80211: Scan frequency 2412 MHz | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000039 seconds | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.028302 seconds | |
| nl80211: Received scan results (5 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 12 | |
| BSS: last_scan_res_used=5/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1e2a1c0 done in 0.028754 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-59 freq=2437 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-59 freq=2437 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 2: 00:3a:99:04:a4:23 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-78 freq=2437 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 3: 00:3a:99:d2:5a:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-80 freq=2412 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 4: 00:3a:98:f5:90:e2 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-81 freq=2412 | |
| wlp1s0b1: selected based on RSN IE | |
| wlp1s0b1: selected BSS 00:3a:98:f5:90:e2 ssid='eduroam' | |
| wlp1s0b1: Considering connect request: reassociate: 0 selected: 00:3a:98:f5:90:e2 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x1e0bdf0 current_ssid=(nil) | |
| wlp1s0b1: Request association with 00:3a:98:f5:90:e2 | |
| wlp1s0b1: Re-association to the same ESS | |
| wlp1s0b1: Add radio work 'sme-connect'@0x1e2a1c0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| RSN: Ignored PMKID candidate without preauth flag | |
| RSN: Ignored PMKID candidate without preauth flag | |
| wlp1s0b1: Starting radio work 'sme-connect'@0x1e2a1c0 after 0.000026 second wait | |
| wlp1s0b1: Automatic auth_alg selection: 0x1 | |
| RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 | |
| RSN: Search for BSSID 00:3a:98:f5:90:e2 | |
| RSN: No PMKSA cache entry found | |
| wlp1s0b1: RSN: using IEEE 802.11i/D9.0 | |
| wlp1s0b1: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 | |
| wlp1s0b1: WPA: Selected mgmt group cipher 32 | |
| wlp1s0b1: WPA: clearing AP WPA IE | |
| WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| wlp1s0b1: WPA: using GTK TKIP | |
| wlp1s0b1: WPA: using PTK CCMP | |
| wlp1s0b1: WPA: using KEY_MGMT 802.1X | |
| wlp1s0b1: WPA: not using MGMT group cipher | |
| WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| RRM: Determining whether RRM can be used - device support: 0x0 | |
| RRM: No RRM in network | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: SME: Trying to authenticate with 00:3a:98:f5:90:e2 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: SCANNING -> AUTHENTICATING | |
| EAPOL: External notification - EAP success=0 | |
| EAPOL: External notification - EAP fail=0 | |
| EAPOL: External notification - portControl=Auto | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| nl80211: Authenticate (ifindex=2) | |
| * bssid=00:3a:98:f5:90:e2 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=0): [NULL] | |
| * Auth Type 0 | |
| nl80211: Authentication request send successfully | |
| nl80211: Event message available | |
| nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0b1 | |
| nl80211: New station 00:3a:98:f5:90:e2 | |
| nl80211: Event message available | |
| nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:98:f5:90:e2 | |
| nl80211: MLME event frame - hexdump(len=30): b0 08 3a 01 74 2f 68 d2 b1 f3 00 3a 98 f5 90 e2 00 3a 98 f5 90 e2 30 d5 00 00 02 00 00 00 | |
| nl80211: Authenticate event | |
| wlp1s0b1: Event AUTH (11) received | |
| wlp1s0b1: SME: Authentication response: peer=00:3a:98:f5:90:e2 auth_type=0 auth_transaction=2 status_code=0 | |
| SME: Authentication response IEs - hexdump(len=0): [NULL] | |
| wlp1s0b1: set_disable_max_amsdu: -1 | |
| wlp1s0b1: set_ampdu_factor: -1 | |
| wlp1s0b1: set_ampdu_density: -1 | |
| wlp1s0b1: set_disable_ht40: 0 | |
| wlp1s0b1: set_disable_sgi: 0 | |
| wlp1s0b1: set_disable_ldpc: 0 | |
| wlp1s0b1: Trying to associate with 00:3a:98:f5:90:e2 (SSID='eduroam' freq=2412 MHz) | |
| wlp1s0b1: State: AUTHENTICATING -> ASSOCIATING | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| nl80211: Associate (ifindex=2) | |
| * bssid=00:3a:98:f5:90:e2 | |
| * freq=2412 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 7f 08 00 00 00 00 00 00 00 40 | |
| * WPA Versions 0x2 | |
| * pairwise=0xfac04 | |
| * group=0xfac02 | |
| * akm=0xfac01 | |
| * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| nl80211: Association request send successfully | |
| l2_packet_receive: src=00:3a:98:f5:90:e2 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:98:f5:90:e2 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00) | |
| nl80211: Event message available | |
| nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0b1 | |
| nl80211: Delete station 00:3a:98:f5:90:e2 | |
| nl80211: Event message available | |
| nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp1s0b1 | |
| nl80211: MLME event 38; timeout with 00:3a:98:f5:90:e2 | |
| wlp1s0b1: Event ASSOC_TIMED_OUT (15) received | |
| wlp1s0b1: SME: Association timed out | |
| wlp1s0b1: Radio work 'sme-connect'@0x1e2a1c0 done in 0.592858 seconds | |
| Added BSSID 00:3a:98:f5:90:e2 into blacklist | |
| wlp1s0b1: Blacklist count 3 --> request scan in 1000 ms | |
| wlp1s0b1: Setting scan request: 1.000000 sec | |
| wlp1s0b1: State: ASSOCIATING -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Add radio work 'scan'@0x1e2a1c0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| wlp1s0b1: Starting radio work 'scan'@0x1e2a1c0 after 0.000017 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000041 seconds | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.665463 seconds | |
| nl80211: Received scan results (6 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 13 | |
| wlp1s0b1: BSS: Add new id 7 BSSID 00:1c:f0:af:4e:6b SSID '' freq 2417 | |
| BSS: last_scan_res_used=6/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1e2a1c0 done in 0.665911 seconds | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-58 freq=2437 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: 1: 00:3a:99:04:bf:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x31 level=-59 freq=2437 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 2: 00:3a:99:04:a4:23 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-78 freq=2437 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 3: 00:3a:99:d2:5a:43 ssid='test' wpa_ie_len=24 rsn_ie_len=20 caps=0x431 level=-79 freq=2412 | |
| wlp1s0b1: skip - SSID mismatch | |
| wlp1s0b1: 4: 00:3a:99:d2:5a:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x431 level=-80 freq=2412 | |
| wlp1s0b1: skip - blacklisted (count=2 limit=0) | |
| wlp1s0b1: 5: 00:1c:f0:af:4e:6b ssid='' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-81 freq=2417 | |
| wlp1s0b1: skip - SSID not known | |
| wlp1s0b1: No APs found - clear blacklist and try again | |
| Removed BSSID 00:3a:98:f5:90:e2 from blacklist (clear) | |
| Removed BSSID 00:3a:99:d2:5a:42 from blacklist (clear) | |
| Removed BSSID 00:3a:99:04:bf:42 from blacklist (clear) | |
| wlp1s0b1: Selecting BSS from priority group 0 | |
| wlp1s0b1: 0: 00:3a:99:04:bf:42 ssid='eduroam' wpa_ie_len=0 rsn_ie_len=24 caps=0x31 level=-58 freq=2437 | |
| wlp1s0b1: selected based on RSN IE | |
| wlp1s0b1: selected BSS 00:3a:99:04:bf:42 ssid='eduroam' | |
| wlp1s0b1: Considering connect request: reassociate: 0 selected: 00:3a:99:04:bf:42 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x1e0bdf0 current_ssid=(nil) | |
| wlp1s0b1: Request association with 00:3a:99:04:bf:42 | |
| wlp1s0b1: Re-association to the same ESS | |
| wlp1s0b1: Add radio work 'sme-connect'@0x1e2a1c0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| RSN: Ignored PMKID candidate without preauth flag | |
| RSN: Ignored PMKID candidate without preauth flag | |
| wlp1s0b1: Starting radio work 'sme-connect'@0x1e2a1c0 after 0.000027 second wait | |
| wlp1s0b1: Automatic auth_alg selection: 0x1 | |
| RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 | |
| RSN: Search for BSSID 00:3a:99:04:bf:42 | |
| RSN: No PMKSA cache entry found | |
| wlp1s0b1: RSN: using IEEE 802.11i/D9.0 | |
| wlp1s0b1: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 | |
| wlp1s0b1: WPA: Selected mgmt group cipher 32 | |
| wlp1s0b1: WPA: clearing AP WPA IE | |
| WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 28 00 | |
| wlp1s0b1: WPA: using GTK TKIP | |
| wlp1s0b1: WPA: using PTK CCMP | |
| wlp1s0b1: WPA: using KEY_MGMT 802.1X | |
| wlp1s0b1: WPA: not using MGMT group cipher | |
| WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| RRM: Determining whether RRM can be used - device support: 0x0 | |
| RRM: No RRM in network | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: SME: Trying to authenticate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2437 MHz) | |
| wlp1s0b1: State: SCANNING -> AUTHENTICATING | |
| EAPOL: External notification - EAP success=0 | |
| EAPOL: External notification - EAP fail=0 | |
| EAPOL: External notification - portControl=Auto | |
| wlp1s0b1: Determining shared radio frequencies (max len 1) | |
| wlp1s0b1: Shared frequencies (len=0): completed iteration | |
| nl80211: Authenticate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2437 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=0): [NULL] | |
| * Auth Type 0 | |
| nl80211: Authentication request send successfully | |
| nl80211: Event message available | |
| nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0b1 | |
| nl80211: New station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 30 49 00 00 02 00 00 00 | |
| nl80211: Authenticate event | |
| wlp1s0b1: Event AUTH (11) received | |
| wlp1s0b1: SME: Authentication response: peer=00:3a:99:04:bf:42 auth_type=0 auth_transaction=2 status_code=0 | |
| SME: Authentication response IEs - hexdump(len=0): [NULL] | |
| wlp1s0b1: set_disable_max_amsdu: -1 | |
| wlp1s0b1: set_ampdu_factor: -1 | |
| wlp1s0b1: set_ampdu_density: -1 | |
| wlp1s0b1: set_disable_ht40: 0 | |
| wlp1s0b1: set_disable_sgi: 0 | |
| wlp1s0b1: set_disable_ldpc: 0 | |
| wlp1s0b1: Trying to associate with 00:3a:99:04:bf:42 (SSID='eduroam' freq=2437 MHz) | |
| wlp1s0b1: State: AUTHENTICATING -> ASSOCIATING | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 | |
| nl80211: Associate (ifindex=2) | |
| * bssid=00:3a:99:04:bf:42 | |
| * freq=2437 | |
| * SSID - hexdump_ascii(len=7): | |
| 65 64 75 72 6f 61 6d eduroam | |
| * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 7f 08 00 00 00 00 00 00 00 40 | |
| * WPA Versions 0x2 | |
| * pairwise=0xfac04 | |
| * group=0xfac02 | |
| * akm=0xfac01 | |
| * htcaps - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * htcaps_mask - hexdump(len=26): 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| * vhtcaps_mask - hexdump(len=12): 00 00 00 00 00 00 00 00 00 00 00 00 | |
| nl80211: Association request send successfully | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp1s0b1 | |
| nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=74:2f:68:d2:b1:f3 A2=00:3a:99:04:bf:42 | |
| nl80211: MLME event frame - hexdump(len=72): 10 00 3a 01 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 3a 99 04 bf 42 40 49 31 00 00 00 4e c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| nl80211: Associate event | |
| wlp1s0b1: Event ASSOC (0) received | |
| wlp1s0b1: Association info event | |
| resp_ies - hexdump(len=42): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c dd 18 00 50 f2 02 01 01 80 00 03 00 00 00 27 00 00 00 42 00 00 00 62 00 00 00 | |
| wlp1s0b1: freq=2437 MHz | |
| wlp1s0b1: State: ASSOCIATING -> ASSOCIATED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| wlp1s0b1: Associated to a new BSS: BSSID=00:3a:99:04:bf:42 | |
| wlp1s0b1: Associated with 00:3a:99:04:bf:42 | |
| wlp1s0b1: WPA: Association event - clear replay counter | |
| wlp1s0b1: WPA: Clear old PTK | |
| TDLS: Remove peers on association | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| EAPOL: External notification - portEnabled=1 | |
| EAPOL: SUPP_PAE entering state CONNECTING | |
| EAPOL: enable timer tick | |
| EAPOL: SUPP_BE entering state IDLE | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| wlp1s0b1: Setting authentication timeout: 10 sec 0 usec | |
| wlp1s0b1: Cancelling scan request | |
| WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0 | |
| WMM AC: U-APSD queues=0x0 | |
| WMM AC: Valid WMM association, WMM AC is enabled | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp1s0b1 | |
| nl80211: Ignore connect event (cmd=46) when using userspace SME | |
| l2_packet_receive: src=00:3a:99:04:bf:42 len=50 | |
| wlp1s0b1: RX EAPOL from 00:3a:99:04:bf:42 | |
| RX EAPOL - hexdump(len=50): 02 00 00 2e 01 01 00 2e 01 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c 70 6f 72 74 69 64 3d 32 39 | |
| wlp1s0b1: Setting authentication timeout: 70 sec 0 usec | |
| EAPOL: Received EAP-Packet frame | |
| EAPOL: SUPP_PAE entering state RESTART | |
| EAP: EAP entering state INITIALIZE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_PAE entering state AUTHENTICATING | |
| EAPOL: SUPP_BE entering state REQUEST | |
| EAPOL: getSuppRsp | |
| EAP: EAP entering state RECEIVED | |
| EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0 | |
| EAP: EAP entering state IDENTITY | |
| wlp1s0b1: CTRL-EVENT-EAP-STARTED EAP authentication started | |
| EAP: Status notification: started (param=) | |
| EAP: EAP-Request Identity data - hexdump_ascii(len=41): | |
| 00 6e 65 74 77 6f 72 6b 69 64 3d 65 64 75 72 6f _networkid=eduro | |
| 61 6d 2c 6e 61 73 69 64 3d 57 69 46 69 2d 42 2c am,nasid=WiFi-B, | |
| 70 6f 72 74 69 64 3d 32 39 portid=29 | |
| EAP: using real identity - hexdump_ascii(len=12): | |
| 66 70 6d 2e 53 69 6e 79 61 6b 53 41 fpm.SinyakSA | |
| EAP: EAP entering state SEND_RESPONSE | |
| EAP: EAP entering state IDLE | |
| EAPOL: SUPP_BE entering state RESPONSE | |
| EAPOL: txSuppRsp | |
| TX EAPOL: dst=00:3a:99:04:bf:42 | |
| TX EAPOL - hexdump(len=21): 01 00 00 11 02 01 00 11 01 66 70 6d 2e 53 69 6e 79 61 6b 53 41 | |
| EAPOL: SUPP_BE entering state RECEIVE | |
| nl80211: Event message available | |
| nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0b1 | |
| nl80211: Delete station 00:3a:99:04:bf:42 | |
| nl80211: Event message available | |
| nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlp1s0b1 | |
| nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlp1s0b1(74:2f:68:d2:b1:f3) A1=00:3a:99:04:bf:42 A2=74:2f:68:d2:b1:f3 | |
| nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 00 3a 99 04 bf 42 74 2f 68 d2 b1 f3 00 3a 99 04 bf 42 00 00 03 00 | |
| nl80211: Deauthenticate event | |
| wlp1s0b1: Event DEAUTH (12) received | |
| wlp1s0b1: Deauthentication notification | |
| wlp1s0b1: * reason 3 (locally generated) | |
| wlp1s0b1: * address 00:3a:99:04:bf:42 | |
| Deauthentication frame IE(s) - hexdump(len=0): [NULL] | |
| wlp1s0b1: CTRL-EVENT-DISCONNECTED bssid=00:3a:99:04:bf:42 reason=3 locally_generated=1 | |
| wlp1s0b1: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=6) | |
| wlp1s0b1: Setting scan request: 0.100000 sec | |
| wlp1s0b1: Radio work 'sme-connect'@0x1e2a1c0 done in 0.019199 seconds | |
| Added BSSID 00:3a:99:04:bf:42 into blacklist | |
| wlp1s0b1: Another BSS in this ESS has been seen; try it next | |
| BSSID 00:3a:99:04:bf:42 blacklist count incremented to 2 | |
| Continuous association failures - consider temporary network disabling | |
| wlp1s0b1: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="eduroam" auth_failures=1 duration=10 reason=CONN_FAILED | |
| wlp1s0b1: Blacklist count 5 --> request scan in 10000 ms | |
| wlp1s0b1: Ignore new scan request for 10.000000 sec since an earlier request is scheduled to trigger sooner | |
| TDLS: Remove peers on disassociation | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| wlp1s0b1: Disconnect event - remove keys | |
| wlp1s0b1: State: ASSOCIATED -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| WMM AC: WMM AC is disabled | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: SUPP_PAE entering state DISCONNECTED | |
| EAPOL: Supplicant port status: Unauthorized | |
| nl80211: Skip set_supp_port(unauthorized) while not associated | |
| EAPOL: SUPP_BE entering state INITIALIZE | |
| EAP: EAP entering state DISABLED | |
| EAPOL: External notification - portValid=0 | |
| nl80211: Event message available | |
| nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlp1s0b1 | |
| nl80211: Ignore disconnect event when using userspace SME | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=0 | |
| * type=1 | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD | |
| wlp1s0b1: Updating hw mode | |
| nl80211: Regulatory information - country=00 | |
| nl80211: 2402-2472 @ 40 MHz 20 mBm | |
| nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR) | |
| nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR) | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR) | |
| nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR) | |
| nl80211: 57240-63720 @ 2160 MHz 0 mBm | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| nl80211: Event message available | |
| nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp1s0b1 | |
| nl80211: Regulatory domain change | |
| * initiator=1 | |
| * type=0 | |
| * alpha2=BY | |
| wlp1s0b1: Event CHANNEL_LIST_CHANGED (28) received | |
| wlp1s0b1: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=BY | |
| wlp1s0b1: Updating hw mode | |
| nl80211: Regulatory information - country=BY (DFS-ETSI) | |
| nl80211: 2402-2482 @ 40 MHz 20 mBm | |
| nl80211: 5170-5250 @ 80 MHz 20 mBm | |
| nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) | |
| nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS) | |
| nl80211: Added 802.11b mode based on 802.11g information | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: External program started a scan | |
| wlp1s0b1: State: DISCONNECTED -> SCANNING | |
| wlp1s0b1: Starting AP scan for wildcard SSID | |
| wlp1s0b1: Optimize scan based on previously generated frequency list | |
| wlp1s0b1: Add radio work 'scan'@0x1e0b7f0 | |
| wlp1s0b1: First radio work item in the queue - schedule start immediately | |
| Delay radio work start until externally triggered scan completes | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.658649 seconds | |
| nl80211: Received scan results (6 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 14 | |
| wlp1s0b1: BSS: Remove id 2 BSSID 00:3a:98:f5:90:e2 SSID 'eduroam' due to no match in scan | |
| BSS: last_scan_res_used=6/32 | |
| wlp1s0b1: New scan results available (own=0 ext=1) | |
| wlp1s0b1: Do not use results from externally requested scan operation for network selection | |
| wlp1s0b1: Starting radio work 'scan'@0x1e0b7f0 after 0.657000 second wait | |
| wlp1s0b1: nl80211: scan request | |
| nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] | |
| nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 | |
| nl80211: Scan frequency 2412 MHz | |
| Scan requested (ret=0) - scan timeout 30 seconds | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: Own scan request started a scan in 0.000053 seconds | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.061332 seconds | |
| nl80211: Received scan results (6 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 15 | |
| BSS: last_scan_res_used=6/32 | |
| wlp1s0b1: New scan results available (own=1 ext=0) | |
| wlp1s0b1: Radio work 'scan'@0x1e0b7f0 done in 0.063249 seconds | |
| wlp1s0b1: Postpone network selection by 9 seconds since all networks are disabled | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: Scan trigger | |
| wlp1s0b1: Event SCAN_STARTED (47) received | |
| wlp1s0b1: External program started a scan | |
| EAPOL: startWhen --> 0 | |
| EAPOL: disable timer tick | |
| RTM_NEWLINK: ifi_index=2 ifname=wlp1s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP]) | |
| nl80211: Event message available | |
| nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0b1 | |
| wlp1s0b1: nl80211: New scan results available | |
| nl80211: Scan probed for SSID '' | |
| nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 | |
| wlp1s0b1: Event SCAN_RESULTS (3) received | |
| wlp1s0b1: Scan completed in 0.659645 seconds | |
| nl80211: Received scan results (6 BSSes) | |
| wlp1s0b1: BSS: Start scan result update 16 | |
| BSS: last_scan_res_used=6/32 | |
| wlp1s0b1: New scan results available (own=0 ext=1) | |
| wlp1s0b1: Do not use results from externally requested scan operation for network selection | |
| ^Cwlp1s0b1: Removing interface wlp1s0b1 | |
| wlp1s0b1: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=SCANNING | |
| TDLS: Tear down peers | |
| wlp1s0b1: State: SCANNING -> DISCONNECTED | |
| nl80211: Set wlp1s0b1 operstate 0->0 (DORMANT) | |
| netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
| EAPOL: External notification - portEnabled=0 | |
| EAPOL: External notification - portValid=0 | |
| wlp1s0b1: WPA: Clear old PMK and PTK | |
| Removed BSSID 00:3a:99:04:bf:42 from blacklist (clear) | |
| wlp1s0b1: BSS: Remove id 0 BSSID 00:3a:99:04:bf:42 SSID 'eduroam' due to wpa_bss_flush | |
| wlp1s0b1: BSS: Remove id 1 BSSID 00:3a:99:04:bf:43 SSID 'test' due to wpa_bss_flush | |
| wlp1s0b1: BSS: Remove id 5 BSSID 00:3a:99:04:a4:23 SSID 'test' due to wpa_bss_flush | |
| wlp1s0b1: BSS: Remove id 4 BSSID 00:3a:99:d2:5a:43 SSID 'test' due to wpa_bss_flush | |
| wlp1s0b1: BSS: Remove id 6 BSSID 00:3a:99:d2:5a:42 SSID 'eduroam' due to wpa_bss_flush | |
| wlp1s0b1: BSS: Remove id 7 BSSID 00:1c:f0:af:4e:6b SSID '' due to wpa_bss_flush | |
| wlp1s0b1: Cancelling scan request | |
| wlp1s0b1: Cancelling authentication timeout | |
| Remove interface wlp1s0b1 from radio phy0 | |
| Remove radio phy0 | |
| nl80211: deinit ifname=wlp1s0b1 disabled_11b_rates=0 | |
| nl80211: Remove monitor interface: refcount=0 | |
| netlink: Operstate: ifindex=2 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) | |
| nl80211: Set mode ifindex 2 iftype 2 (STATION) | |
| nl80211: Unsubscribe mgmt frames handle 0x8888888889683049 (mode change) | |
| wlp1s0b1: CTRL-EVENT-TERMINATING |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment