raspberry_pi_getting_started

Getting started with Raspberry Pi
=================================

1. Prepare a SD card, card reader, HDMI cable, micro usb cable & adaptor (these aren't shipped with rPi)
2. Download the OS from the web : www.raspberrypi.org/downloads (I choose "wheezy")
3. Create image file from downloaded file using gui (RPI-sd card builder) (For OSX)
4. Insert SD card, connect display & usb keyboard/mouse, then connect the micro usb to power on
5. Wait for boot, then Raspi-config will be shown, use tab to switch to Select or Finish button
6. Use "sudo raspi-config" to enter the config screen again
7. Change boot_behaviour to start on desktop by default
8. Reboot, then wheezy will be launched
9. Edit /etc/profile.d/raspi-config.sh to define custom boot behaviour