build-couchdb `rake` output on 10.9

gistfile1.txt

postel:build-couchdb natevw$ rake
Build CouchDB commit: 8ddd81c22179667c77146b2ec96d543fb95c8043
mkdir -p /Users/natevw/Development/Others'/build-couchdb/build/bin
/Users/natevw/Development/Others'/build-couchdb/dependencies/autoconf-2.59/configure --prefix=/Users/natevw/Development/Others'/build-couchdb/build --program-suffix=2.59 --datadir=/Users/natevw/Development/Others'/build-couchdb/build/share/autoconf-2.59
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/Users/natevw/Development/Others'/build-couchdb/dependencies/autoconf-2.59/configure: eval: line 1432: unexpected EOF while looking for matching `''
/Users/natevw/Development/Others'/build-couchdb/dependencies/autoconf-2.59/configure: eval: line 1433: syntax error: unexpected end of file
configure: WARNING: `missing' script is too old or missing
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking for expr... /bin/expr
checking for gm4... /usr/bin/gm4
checking whether m4 supports frozen files... yes
checking for perl... /usr/bin/perl
checking for emacs... emacs
checking whether emacs is sufficiently recent... yes
checking for emacs... emacs
checking where .elc files should go... ${datadir}/emacs/site-lisp
configure: creating ./config.status
./config.status: line 339: for: command not found
./config.status: line 341: Try: command not found
./config.status: line 363: install_sh: command not found
./config.status: line 363: Try: command not found
./config.status: line 697: @ at all, there
      # is no need to browse any of the substitutions).
      # These are the two extra sed commands mentioned above.
      (echo :t: command not found
./config.status: command substitution: line 698: unexpected EOF while looking for matching `''
./config.status: command substitution: line 705: syntax error: unexpected end of file
./config.status: command substitution: line 695: syntax error near unexpected token `fi'
./config.status: command substitution: line 695: `    fi'
./config.status: command substitution: line 694: syntax error near unexpected token `;;'
./config.status: command substitution: line 694: ` ;;'
./config.status: command substitution: line 694: syntax error near unexpected token `;;'
./config.status: command substitution: line 694: ` ;;'
./config.status: command substitution: line 703: syntax error: unexpected end of file
./config.status: command substitution: line 695: syntax error near unexpected token `done'
./config.status: command substitution: line 695: `    done'
./config.status: command substitution: line 695: syntax error near unexpected token `else'
./config.status: command substitution: line 695: `else'
./config.status: command substitution: line 695: syntax error near unexpected token `fi'
./config.status: command substitution: line 695: `    fi ;;'
./config.status: line 694: to: command not found
./config.status: command substitution: line 696: syntax error near unexpected token `newline'
./config.status: command substitution: line 696: `case '
./config.status: command substitution: line 694: syntax error near unexpected token `in'
./config.status: command substitution: line 694: ` in'
./config.status: command substitution: line 694: syntax error near unexpected token `;;'
./config.status: command substitution: line 694: `;;'
./config.status: command substitution: line 694: syntax error near unexpected token `;;'
./config.status: command substitution: line 694: `/"$ac_dir";;'
./config.status: line 694: q /subs.sed >/subs.frag
    else
      sed q /subs.sed >/subs.frag
    fi
    if test ! -s /subs.frag; then
      ac_more_lines=false
    else
      # The purpose of the label and of the branching condition is to
      # speed up the sed processing (if there are no expr  + 1expr  + echo  | sed 's,[^:]*:,,'echo  | sed 's,:.*,,'echo  | sed 's,[^:]*:,,'echo  | sed 's,:.*,,'(dirname ) 2>/dev/null ||
expr X : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| 	 X : 'X\(//\)[^/]' \| 	 X : 'X\(//\)$' \| 	 X : 'X\(/\)' \| 	 .     : '\(.\)' 2>/dev/null ||
echo X |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'(dirname ) 2>/dev/null ||
expr X : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| 	 X : 'X\(//\)[^/]' \| 	 X : 'X\(//\)$' \| 	 X : 'X\(/\)' \| 	 .     : '\(.\)' 2>/dev/null ||
echo X |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'echo  | sed 's,^\.[\/],,'echo  | sed 's,/[^\/]*,../,g'echo  | sed 's,/$,,'cd foo && pwdpwdpwdpwdconfigure' which instantiates (i.e., don't
  # use config.status), people would be surprised to read:
  #    /* config.h.  Generated by config.status.  */
  if test x = x-; then
    configure_input=
  else
    configure_input=.: File name too long
./config.status: line 726: :t: command not found
./config.status: line 727: /@[a-zA-Z_][a-zA-Z_0-9]*@/!b: No such file or directory
./config.status: line 728: s,@configure_input@,,: command not found
./config.status: line 728: t: command not found
./config.status: line 729: s,@srcdir@,,: command not found
./config.status: line 729: t: command not found
./config.status: line 730: s,@abs_srcdir@,,: command not found
./config.status: line 730: t: command not found
./config.status: line 731: s,@top_srcdir@,,: command not found
./config.status: line 731: t: command not found
./config.status: line 732: s,@abs_top_srcdir@,,: command not found
./config.status: line 732: t: command not found
./config.status: line 733: s,@builddir@,,: command not found
./config.status: line 733: t: command not found
./config.status: line 734: s,@abs_builddir@,,: command not found
./config.status: line 734: t: command not found
./config.status: line 735: s,@top_builddir@,,: command not found
./config.status: line 735: t: command not found
./config.status: line 736: s,@abs_top_builddir@,,: command not found
./config.status: line 736: t: command not found
./config.status: line 737: s,@INSTALL@,,: command not found
./config.status: line 737: t: command not found
./config.status: line 869: unexpected EOF while looking for matching `"'
./config.status: line 895: syntax error: unexpected end of file
== Output of config.log ==
cat config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by GNU Autoconf configure 2.59, which was
generated by GNU Autoconf 2.58a.  Invocation command line was

  $ /Users/natevw/Development/Others'/build-couchdb/dependencies/autoconf-2.59/configure --prefix=/Users/natevw/Development/Others'/build-couchdb/build --program-suffix=2.59 --datadir=/Users/natevw/Development/Others'/build-couchdb/build/share/autoconf-2.59

## --------- ##
## Platform. ##
## --------- ##

hostname = postel
uname -m = x86_64
uname -r = 13.0.0
uname -s = Darwin
uname -v = Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64

/usr/bin/uname -p = i386
/bin/uname -X     = unknown

/bin/arch              = unknown
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
hostinfo               = Mach kernel version:
	 Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel configured for up to 2 processors.
2 processors are physically available.
2 processors are logically available.
Processor type: i486 (Intel 80486)
Processors active: 0 1
Primary memory available: 2.00 gigabytes
Default processor set: 159 tasks, 676 threads, 2 processors
Load average: 3.13, Mach factor: 0.67
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /Users/natevw/Development/Others'/build-couchdb/build/bin
PATH: /Users/natevw/.rvm/gems/ruby-1.9.2-p320/bin
PATH: /Users/natevw/.rvm/gems/ruby-1.9.2-p320@global/bin
PATH: /Users/natevw/.rvm/rubies/ruby-1.9.2-p320/bin
PATH: /Users/natevw/.rvm/bin
PATH: /Users/natevw/Development/Pebble/arm-cs-tools/bin
PATH: /usr/local/share/npm/bin
PATH: /usr/local/bin
PATH: /usr/local/sbin
PATH: /usr/bin
PATH: /bin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/local/bin
PATH: /opt/X11/bin
PATH: /usr/local/MacGPG2/bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:1303: checking for a BSD-compatible install
configure:1358: result: /usr/bin/install -c
configure:1369: checking whether build environment is sane
configure:1412: result: yes
configure:1436: WARNING: `missing' script is too old or missing
configure:1444: checking for gawk
configure:1473: result: no
configure:1444: checking for mawk
configure:1473: result: no
configure:1444: checking for nawk
configure:1473: result: no
configure:1444: checking for awk
configure:1460: found /usr/bin/awk
configure:1470: result: awk
configure:1480: checking whether make sets $(MAKE)
configure:1500: result: yes
configure:1687: checking for expr
configure:1705: found /bin/expr
configure:1717: result: /bin/expr
configure:1738: checking for gm4
configure:1756: found /usr/bin/gm4
configure:1768: result: /usr/bin/gm4
configure:1779: checking whether m4 supports frozen files
configure:1791: result: yes
configure:1817: checking for perl
configure:1835: found /usr/bin/perl
configure:1848: result: /usr/bin/perl
configure:1879: checking for emacs
configure:1895: found /usr/bin/emacs
configure:1905: result: emacs
configure:1922: checking whether emacs is sufficiently recent
configure:1932: $TEST_EMACS -batch -q -f batch-byte-compile conftest.el 1>&2

In broken-mode:
conftest.el:2:35:Warning: assignment to free variable `broken-defaults'
Wrote /private/var/folders/h_/3sh02t4d2558cy33c86d833h0000gn/T/autoconf-2.59_build20131024-81590-19gacwe/conftest.elc
configure:1935: $? = 0
configure:1944: result: yes
configure:1960: checking for emacs
configure:1986: result: emacs
configure:2013: checking where .elc files should go
configure:2026: $EMACS -batch -q -eval '(while load-path (princ (concat (car load-path) "
")) (setq load-path (cdr load-path)))' </dev/null >conftest.out
configure:2029: $? = 0
configure:2042: result: ${datadir}/emacs/site-lisp
configure:2184: creating ./config.status

## ---------------------- ##
## Running config.status. ##
## ---------------------- ##

This file was extended by GNU Autoconf config.status 2.59, which was
generated by GNU Autoconf 2.58a.  Invocation command line was

  CONFIG_FILES    = 
  CONFIG_HEADERS  = 
  CONFIG_LINKS    = 
  CONFIG_COMMANDS = 
  $ ./config.status 

on postel


## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_env_EMACSLOADPATH_set=
ac_cv_env_EMACSLOADPATH_value=
ac_cv_env_EMACS_set=
ac_cv_env_EMACS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_EXPR=/bin/expr
ac_cv_path_M4=/usr/bin/gm4
ac_cv_path_PERL=/usr/bin/perl
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AWK=awk
ac_cv_prog_EMACS=emacs
ac_cv_prog_TEST_EMACS=emacs
ac_cv_prog_emacs_ok=yes
ac_cv_prog_gnu_m4=yes
ac_cv_prog_make_make_set=yes
am_cv_lispdir='${datadir}/emacs/site-lisp'

## ----------------- ##
## Output variables. ##
## ----------------- ##

ACLOCAL='aclocal-1.7a'
AMTAR='tar'
AUTOCONF='autoconf'
AUTOHEADER='autoheader'
AUTOMAKE='automake-1.7a'
AWK='awk'
CYGPATH_W='echo'
DEFS='-DPACKAGE_NAME=\"GNU\ Autoconf\" -DPACKAGE_TARNAME=\"autoconf\" -DPACKAGE_VERSION=\"2.59\" -DPACKAGE_STRING=\"GNU\ Autoconf\ 2.59\" -DPACKAGE_BUGREPORT=\"bug-autoconf@gnu.org\" -DPACKAGE=\"autoconf\" -DVERSION=\"2.59\" '
ECHO_C='ECHO_N=''
ECHO_T=''
EMACS='emacs'
EMACSLOADPATH=''
EXPR='/bin/expr'
HELP2MAN='help2man'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
M4='/usr/bin/gm4'
MAKEINFO='makeinfo'
PACKAGE='autoconf'
PACKAGE_BUGREPORT='bug-autoconf@gnu.org'
PACKAGE_NAME='GNU Autoconf'
PACKAGE_STRING='GNU Autoconf 2.59'
PACKAGE_TARNAME='autoconf'
PACKAGE_VERSION='2.59'
PATH_SEPARATOR=':'
PERL='/usr/bin/perl'
SET_MAKE=''
git checkout HEAD .
SHELL='/bin/sh'
STRIP=''
TEST_EMACS='emacs'
VERSION='2.59'
ac_ct_STRIP=''
am__leading_dot='.'
bindir='${exec_prefix}/bin'
build_alias=''
datadir='/Users/natevw/Development/Others'/build-couchdb/build/share/autoconf-2.59'
exec_prefix='${prefix}'
host_alias=''
includedir='${prefix}/include'
infodir='${prefix}/info'
install_sh='/Users/natevw/Development/Others'/build-couchdb/dependencies/autoconf-2.59/config/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
lispdir='${datadir}/emacs/site-lisp'
localstatedir='${prefix}/var'
mandir='${prefix}/man'
oldincludedir='/usr/include'
prefix='/Users/natevw/Development/Others'/build-couchdb/build'
program_transform_name='s,$$,2.59,'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

#define PACKAGE "autoconf"
#define PACKAGE_BUGREPORT "bug-autoconf@gnu.org"
#define PACKAGE_NAME "GNU Autoconf"
#define PACKAGE_STRING "GNU Autoconf 2.59"
#define PACKAGE_TARNAME "autoconf"
#define PACKAGE_VERSION "2.59"
#define VERSION "2.59"

configure: exit 1
== End of config.log ==
rm -rf autom4te.cache
rake aborted!
Command failed with status (1): [/Users/natevw/Development/Others'/build-co...]

Tasks: TOP => default => couchdb:build => couchdb:couchdb => erlang:build => /Users/natevw/Development/Others'/build-couchdb/build/bin/erl => /Users/natevw/Development/Others'/build-couchdb/build/bin/autoconf2.59
(See full trace by running task with --trace)
postel:build-couchdb natevw$ echo $?
1
postel:build-couchdb natevw$