Created
May 22, 2016 14:18
-
-
Save neelchauhan/562c19061b6442d33f19e6dff0dccb47 to your computer and use it in GitHub Desktop.
dmesg snippet from FreeBSD on Dell Inspiron 7352 (testing Linux 4.6 i915)
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[drm] Connector eDP-1: get mode from tunables: | |
[drm] - kern.vt.fb.modes.eDP-1 | |
[drm] - kern.vt.fb.default_mode | |
[drm:drm_sysfs_connector_add] adding "eDP-1" to sysfs | |
[drm:drm_sysfs_hotplug_event] generating hotplug event | |
[drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000 | |
[drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 500 t9 2000 t10 500 t11_t12 5000 | |
[drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 | |
[drm:intel_dp_init_panel_power_sequencer] backlight on delay 50, off delay 200 | |
pm_runtime_mark_last_busy not implemented -- see your local kernel hacker | |
__pm_runtime_suspend not implemented -- see your local kernel hacker | |
[drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 | |
[drm:edp_panel_vdd_on] Turning eDP port A VDD on | |
[drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f | |
[drm:intel_dp_get_dpcd] DPCD: fffff800931de106h | |
[drm:intel_dp_get_dpcd] Detected EDP PSR Panel. | |
[drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no | |
[drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 | |
[drm:intel_dp_print_rates] sink rates: 162000, 270000 | |
[drm:intel_dp_print_rates] common rates: 162000, 270000 | |
[drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 | |
[drm:drm_dp_i2c_do_msg] native defer | |
[drm:drm_dp_i2c_do_msg] native defer | |
[drm:drm_dp_i2c_do_msg] native defer | |
[drm:drm_dp_i2c_do_msg] native defer | |
[drm:drm_dp_i2c_do_msg] native defer | |
[drm:drm_dp_i2c_do_msg] native defer | |
[drm:drm_dp_i2c_do_msg] native defer | |
[drm:drm_dp_i2c_do_msg] native defer | |
[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc. | |
[drm:drm_edid_to_eld] ELD: no CEA Extension found | |
[drm:intel_dp_drrs_init] VBT doesn't support DRRS | |
[drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937 | |
[drm] Connector HDMI-A-1: get mode from tunables: | |
[drm] - kern.vt.fb.modes.HDMI-A-1 | |
[drm] - kern.vt.fb.default_mode | |
[drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs | |
[drm:drm_sysfs_hotplug_event] generating hotplug event | |
[drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: enabled | |
[drm:intel_modeset_readout_hw_state] [CRTC:30] hw state readout: disabled | |
[drm:intel_modeset_readout_hw_state] [CRTC:34] hw state readout: disabled | |
[drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0 | |
[drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 | |
[drm:intel_modeset_readout_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0 | |
[drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: enabled, pipe A | |
[drm:intel_modeset_readout_hw_state] [ENCODER:45:TMDS-45] hw state readout: disabled, pipe A | |
[drm:intel_modeset_readout_hw_state] [CONNECTOR:37:eDP-1] hw state readout: enabled | |
[drm:intel_modeset_readout_hw_state] [CONNECTOR:46:HDMI-A-1] hw state readout: disabled | |
[drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 0xfffff8000b70c000 | |
[drm:drm_calc_timestamping_constants] crtc 26: hwmode: htotal 2082, vtotal 1144, vdisplay 1080 | |
[drm:drm_calc_timestamping_constants] crtc 26: clock 142899 kHz framedur 16667772 linedur 14569 | |
[drm:drm_vblank_on] crtc 0, vblank enabled 0, inmodeset 1 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x5 p(0,134)@ 179.782550 -> 179.782550 [e 0 us, 0 rep] | |
[drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config 0xfffff8000b70c000 for pipe A | |
[drm:intel_dump_pipe_config] cpu_transcoder: D | |
[drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0 | |
[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 | |
[drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4994717, gmch_n: 8388608, link_m: 277484, link_n: 524288, tu: 64 | |
[drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 | |
[drm:intel_dump_pipe_config] audio: 0, infoframes: 0 | |
[drm:intel_dump_pipe_config] requested mode: | |
[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 142899 1920 1968 2000 2082 1080 1082 1087 1144 0x40 0x9 | |
[drm:intel_dump_pipe_config] adjusted mode: | |
[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 142899 1920 1968 2000 2082 1080 1082 1087 1144 0x40 0x9 | |
[drm:intel_dump_crtc_timings] crtc timings: 142899 1920 1968 2000 2082 1080 1082 1087 1144, type: 0x40 flags: 0x9 | |
[drm:intel_dump_pipe_config] port clock: 270000 | |
[drm:intel_dump_pipe_config] pipe src size: 1920x1080 | |
[drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 | |
[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 | |
[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled | |
[drm:intel_dump_pipe_config] ips: 0 | |
[drm:intel_dump_pipe_config] double wide: 0 | |
[drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0 | |
[drm:intel_dump_pipe_config] planes on this crtc | |
[drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0 | |
[drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 | |
[drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 | |
[drm:intel_dump_pipe_config] [CRTC:30][setup_hw_state] config 0xfffff8000b604800 for pipe B | |
[drm:intel_dump_pipe_config] cpu_transcoder: B | |
[drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 | |
[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 | |
[drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 | |
[drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 | |
[drm:intel_dump_pipe_config] audio: 0, infoframes: 0 | |
[drm:intel_dump_pipe_config] requested mode: | |
[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 | |
[drm:intel_dump_pipe_config] adjusted mode: | |
[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 | |
[drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 | |
[drm:intel_dump_pipe_config] port clock: 0 | |
[drm:intel_dump_pipe_config] pipe src size: 0x0 | |
[drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 | |
[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 | |
[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled | |
[drm:intel_dump_pipe_config] ips: 0 | |
[drm:intel_dump_pipe_config] double wide: 0 | |
[drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0 | |
[drm:intel_dump_pipe_config] planes on this crtc | |
[drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 disabled, scaler_id = 0 | |
[drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = 0 | |
[drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = 0 | |
[drm:intel_dump_pipe_config] [CRTC:34][setup_hw_state] config 0xfffff8000b710400 for pipe C | |
[drm:intel_dump_pipe_config] cpu_transcoder: C | |
[drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 | |
[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 | |
[drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 | |
[drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 | |
[drm:intel_dump_pipe_config] audio: 0, infoframes: 0 | |
[drm:intel_dump_pipe_config] requested mode: | |
[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 | |
[drm:intel_dump_pipe_config] adjusted mode: | |
[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 | |
[drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 | |
[drm:intel_dump_pipe_config] port clock: 0 | |
[drm:intel_dump_pipe_config] pipe src size: 0x0 | |
[drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 | |
[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 | |
[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled | |
[drm:intel_dump_pipe_config] ips: 0 | |
[drm:intel_dump_pipe_config] double wide: 0 | |
[drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0 | |
[drm:intel_dump_pipe_config] planes on this crtc | |
[drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 2.0 idx: 6 disabled, scaler_id = 0 | |
[drm:intel_dump_pipe_config] CURSOR PLANE:33 plane: 2.3 idx: 7 disabled, scaler_id = 0 | |
[drm:intel_dump_pipe_config] STANDARD PLANE:35 plane: 2.1 idx: 8 disabled, scaler_id = 0 | |
[drm:intel_power_well_disable] disabling display | |
[drm:hsw_set_power_well] Requesting to disable the power well | |
[drm:ironlake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 | |
[drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 | |
[drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 | |
[drm:intel_alloc_initial_plane_obj] initial plane fb obj 0xfffff800931e5b40 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (1) | |
[drm:drm_atomic_state_init] Allocated atomic state 0xfffff80093115600 | |
[drm:drm_property_reference_blob] 0xfffff80043293300: blob ID: 48 (1) | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:26:crtc-0] 0xfffff8004329e400 state to 0xfffff80093115600 | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:30:crtc-1] 0xfffff8004329e000 state to 0xfffff80093115600 | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:34:crtc-2] 0xfffff80043c73c00 state to 0xfffff80093115600 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (2) | |
[drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-0] 0xfffff800433f9900 state to 0xfffff80093115600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:25:plane-1] 0xfffff80043369100 state to 0xfffff80093115600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:27:plane-2] 0xfffff800431af800 state to 0xfffff80093115600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:28:plane-3] 0xfffff800431d3200 state to 0xfffff80093115600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:29:plane-4] 0xfffff80043368a00 state to 0xfffff80093115600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:31:plane-5] 0xfffff80043350300 state to 0xfffff80093115600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:32:plane-6] 0xfffff8000ba5ab00 state to 0xfffff80093115600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:33:plane-7] 0xfffff8000b9fe100 state to 0xfffff80093115600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:35:plane-8] 0xfffff800433fbd00 state to 0xfffff80093115600 | |
[drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] 0xfffff80043d062a0 state to 0xfffff80093115600 | |
[drm:drm_atomic_get_connector_state] Added [CONNECTOR:46] 0xfffff80043d06280 state to 0xfffff80093115600 | |
[drm:update_connector_routing] Updating routing for [CONNECTOR:37:eDP-1] | |
[drm:update_connector_routing] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:TMDS-36], now on [CRTC:26:crtc-0] | |
[drm:update_connector_routing] Updating routing for [CONNECTOR:46:HDMI-A-1] | |
[drm:update_connector_routing] Disabling [CONNECTOR:46:HDMI-A-1] | |
[drm:intel_plane_atomic_calc_changes] [CRTC:26] has [PLANE:23] with fb 49 | |
[drm:intel_plane_atomic_calc_changes] [PLANE:23] visible 1 -> 1, off 0, on 0, ms 0 | |
[drm:drm_atomic_state_default_clear] Clearing atomic state 0xfffff80093115600 | |
[drm:drm_property_unreference_blob] 0xfffff80043293300: blob ID: 48 (2) | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_state_free] Freeing atomic state 0xfffff80093115600 | |
[drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 | |
[drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] | |
[drm:i915_gem_context_init] LR context support initialized | |
mapping_gfp_constraint not implemented -- see your local kernel hacker | |
[drm:intel_init_pipe_control] render ring pipe control offset: 0x007e9000 | |
[drm:gen8_init_common_ring] Execlists enabled for render ring | |
[drm:gen8_init_common_ring] Execlists enabled for blitter ring | |
[drm:gen8_init_common_ring] Execlists enabled for bsd ring | |
[drm:gen8_init_common_ring] Execlists enabled for video enhancement ring | |
[drm:intel_update_cdclk] Current CD clock rate: 675000 kHz | |
[drm:intel_fbdev_init_bios] found possible fb from plane A | |
[drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping | |
[drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping | |
[drm:intel_fbdev_init_bios] checking plane A for BIOS fb | |
[drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400 | |
[drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400) | |
[drm:intel_fbdev_init_bios] pipe B not active, skipping | |
[drm:intel_fbdev_init_bios] pipe C not active, skipping | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (2) | |
[drm:intel_fbdev_init_bios] using BIOS fb for initial console | |
async_schedule is dodgy -- see your local kernel hacker | |
register_acpi_notifier unimplemented | |
[drm:drm_helper_probe_single_connector_modes] | |
pm_runtime_set_autosuspend_delay not implemented -- see your local kernel hacker | |
__pm_runtime_use_autosuspend not implemented -- see your local kernel hacker | |
component_add not implemented -- see your local kernel hacker | |
[drm] Initialized i915 1.6.0 20160229 for drmn on minor 0 | |
[CONNECTOR:37:eDP-1] | |
[drm:intel_dp_detect] [CONNECTOR:37:eDP-1] | |
[drm:intel_dp_probe_oui] Sink OUI: 0022b9 | |
[drm:intel_dp_probe_oui] Branch OUI: 000000 | |
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] status updated from unknown to connected | |
[drm:drm_property_unreference_blob] 0xfffff800431a5200: blob ID: 40 (1) | |
[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc. | |
[drm:drm_edid_to_eld] ELD: no CEA Extension found | |
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : | |
[drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 142900 1920 1968 2000 2082 1080 1082 1087 1144 0x48 0x9 | |
[drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 114300 1920 1968 2000 2082 1080 1082 1087 1144 0x40 0x9 | |
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] | |
[drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-1] | |
[drm:intel_hdmi_detect] HDMI live status down | |
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] status updated from unknown to disconnected | |
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected | |
[drm:drm_setup_crtcs] [drm:drm_sysfs_hotplug_event] | |
generating hotplug event | |
[drm:drm_enable_connectors] [drm:drm_sysfs_hotplug_event] connector 37 enabled? yes | |
generating hotplug event | |
[drm:drm_enable_connectors] connector 46 enabled? no | |
[drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 | |
[drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 | |
[drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080 | |
[drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping | |
[drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) | |
[drm:intelfb_create] re-using BIOS fb | |
[drm:intelfb_create] allocated 1920x1080 fb: 0x00000000, bo 0xfffff800931e5b40 | |
VT: Replacing driver "efifb" with new "fb". | |
[drm:drm_atomic_state_init] Allocated atomic state 0xfffff8000b019600 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-0] 0xfffff80043369300 state to 0xfffff8000b019600 | |
[drm:drm_property_reference_blob] 0xfffff80043293300: blob ID: 48 (1) | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:26:crtc-0] 0xfffff8000b711000 state to 0xfffff8000b019600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:25:plane-1] 0xfffff800431af500 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff800431af500 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff800431af500 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:27:plane-2] 0xfffff8000b9fe700 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b9fe700 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b9fe700 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:28:plane-3] 0xfffff8000b19d200 state to 0xfffff8000b019600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:29:plane-4] 0xfffff8000b9d5e00 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b9d5e00 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b9d5e00 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:31:plane-5] 0xfffff8000ba9ec00 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000ba9ec00 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000ba9ec00 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:32:plane-6] 0xfffff80043350700 state to 0xfffff8000b019600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:33:plane-7] 0xfffff8000ba5a400 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000ba5a400 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000ba5a400 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:35:plane-8] 0xfffff8000b9d6e00 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b9d6e00 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b9d6e00 | |
[drm:drm_property_unreference_blob] 0xfffff80043293300: blob ID: 48 (2) | |
[drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 0xfffff8000b711000 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80043369300 to [CRTC:26:crtc-0] | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_set_fb_for_plane] Set [FB:49] for plane state 0xfffff80043369300 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:crtc-0] to 0xfffff8000b019600 | |
[drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] 0xfffff800439c66c0 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff800439c66c0 to [NOCRTC] | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff800439c66c0 to [CRTC:26:crtc-0] | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:30:crtc-1] 0xfffff8000b607c00 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff8000b607c00 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b19d200 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b19d200 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:crtc-1] to 0xfffff8000b019600 | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:34:crtc-2] 0xfffff8000b607800 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff8000b607800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80043350700 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80043350700 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:crtc-2] to 0xfffff8000b019600 | |
[drm:drm_atomic_check_only] checking 0xfffff8000b019600 | |
[drm:update_connector_routing] Updating routing for [CONNECTOR:37:eDP-1] | |
[drm:update_connector_routing] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:TMDS-36], now on [CRTC:26:crtc-0] | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:crtc-0] to 0xfffff8000b019600 | |
[drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains | |
[drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 18 | |
[drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 142900KHz | |
[drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18 | |
[drm:intel_dp_compute_config] DP link bw required 257220 available 432000 | |
[drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 | |
[drm:intel_dump_pipe_config] [CRTC:26][modeset] config 0xfffff8000b711000 for pipe A | |
[drm:intel_dump_pipe_config] cpu_transcoder: D | |
[drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 | |
[drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 | |
[drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4994717, gmch_n: 8388608, link_m: 277484, link_n: 524288, tu: 64 | |
[drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 | |
[drm:intel_dump_pipe_config] audio: 0, infoframes: 0 | |
[drm:intel_dump_pipe_config] requested mode: | |
[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 142900 1920 1968 2000 2082 1080 1082 1087 1144 0x48 0x9 | |
[drm:intel_dump_pipe_config] adjusted mode: | |
[drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 142900 1920 1968 2000 2082 1080 1082 1087 1144 0x48 0x9 | |
[drm:intel_dump_crtc_timings] crtc timings: 142900 1920 1968 2000 2082 1080 1082 1087 1144, type: 0x48 flags: 0x9 | |
[drm:intel_dump_pipe_config] port clock: 270000 | |
[drm:intel_dump_pipe_config] pipe src size: 1920x1080 | |
[drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 | |
[drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 | |
[drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled | |
[drm:intel_dump_pipe_config] ips: 1 | |
[drm:intel_dump_pipe_config] double wide: 0 | |
[drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0 | |
[drm:intel_dump_pipe_config] planes on this crtc | |
[drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled[drm:intel_dump_pipe_config] FB:49, fb = 1920x1080 format = 0x34325258[drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 | |
[drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 | |
[drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 | |
[drm:intel_modeset_checks] New cdclk calculated to be atomic 337500, actual 337500 | |
[drm:intel_plane_atomic_calc_changes] [CRTC:26] has [PLANE:23] with fb 49 | |
[drm:intel_plane_atomic_calc_changes] [PLANE:23] visible 1 -> 1, off 1, on 1, ms 1 | |
[drm:drm_atomic_commit] commiting 0xfffff8000b019600 | |
[drm:intel_power_well_enable] enabling display | |
[drm:hsw_set_power_well] Enabling power well | |
[drm:intel_edp_backlight_off] | |
start FB_INFO: | |
type=11 height=1080 width=1920 depth=32 | |
cmsize=16 size=8294400 | |
pbase=0xb0000000 vbase=0xffffffff82610000 | |
name=drmn0 flags=0x0 stride=7680 bpp=32 | |
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 | |
end FB_INFO | |
drmn0: fb0: inteldrmfb frame buffer device | |
[drm:intel_panel_actually_set_backlight] set backlight PWM = 0 | |
[drm:lpt_disable_backlight] cpu backlight was enabled, disabling | |
[drm:drm_vblank_off] crtc 0, vblank enabled 0, inmodeset 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x5 p(0,248)@ 180.84549 -> 180.84549 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=1, diff=18, hw=12628 hw_last=12610 | |
[drm:intel_disable_pipe] disabling pipe A | |
[drm:edp_panel_off] Turn eDP port A panel power off | |
[drm:wait_panel_off] Wait for panel power off time | |
[drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 | |
[drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x00000012, pins 0x00000010 | |
[drm:intel_hpd_irq_handler] digital hpd port A - long | |
[drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 | |
[drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A | |
[drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x00000012, pins 0x00000010 | |
[drm:intel_hpd_irq_handler] digital hpd port A - long | |
[drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 | |
[drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A | |
[drm:wait_panel_status] Wait complete | |
[drm:drm_calc_timestamping_constants] crtc 26: hwmode: htotal 2082, vtotal 1144, vdisplay 1080 | |
[drm:drm_calc_timestamping_constants] crtc 26: clock 142900 kHz framedur 16667655 linedur 14569 | |
[drm:0xffffffff82fe0e0ds] *ERROR* Switching to FCLK failed | |
[drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x00000012, pins 0x00000010 | |
[drm:intel_hpd_irq_handler] digital hpd port A - long | |
[drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 2 | |
[drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A | |
[drm:intel_update_cdclk] Current CD clock rate: 337500 kHz | |
[drm:edp_panel_on] Turn eDP port A panel power on | |
[drm:wait_panel_power_cycle] Wait for panel power cycle | |
[drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 | |
[drm:wait_panel_status] Wait complete | |
[drm:wait_panel_on] Wait for panel power on | |
[drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 | |
[drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x00000012, pins 0x00000010 | |
[drm:intel_hpd_irq_handler] digital hpd port A - long | |
[drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 3 | |
[drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A | |
[drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x00000011, pins 0x00000010 | |
[drm:intel_hpd_irq_handler] digital hpd port A - short | |
[drm:intel_dp_hpd_pulse] got hpd irq on port A - short | |
[drm:wait_panel_status] Wait complete | |
[drm:edp_panel_vdd_on] Turning eDP port A VDD on | |
[drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b | |
[drm:intel_dp_set_signal_levels] Using signal levels 00000000 | |
[drm:intel_dp_set_signal_levels] Using vswing level 0 | |
[drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 | |
[drm:intel_dp_set_signal_levels] Using signal levels 04000000 | |
[drm:intel_dp_set_signal_levels] Using vswing level 1 | |
[drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 | |
[drm:intel_dp_link_training_clock_recovery] clock recovery OK | |
[drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful | |
[drm:intel_enable_pipe] enabling pipe A | |
[drm:drm_vblank_on] crtc 0, vblank enabled 0, inmodeset 1 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-64)@ 180.903549 -> 180.903549 [e 0 us, 0 rep] | |
[drm:intel_edp_backlight_on] | |
[drm:intel_panel_enable_backlight] pipe A | |
[drm:intel_panel_actually_set_backlight] set backlight PWM = 937 | |
[drm:intel_edp_drrs_enable] Panel doesn't support DRRS | |
[drm:intel_fbc_alloc_cfb] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1 | |
[drm:intel_fbc_enable] Enabling FBC on pipe A | |
local_irq_disable not implemented -- see your local kernel hacker | |
[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-47)@ 180.954549 -> 180.954549 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=20, diff=3, hw=12632 hw_last=12629 | |
[drm:vblank_disable_fn] disabling vblank on crtc 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-42)@ 180.954549 -> 180.954549 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=23, diff=0, hw=12632 hw_last=12632 | |
local_irq_enable not implemented -- see your local kernel hacker | |
[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-37)@ 180.954549 -> 180.954549 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=23, diff=0, hw=12632 hw_last=12632 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-62)@ 180.970549 -> 180.970549 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=23, diff=1, hw=12633 hw_last=12632 | |
[drm:vblank_disable_fn] disabling vblank on crtc 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-56)@ 180.970549 -> 180.970549 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=24, diff=0, hw=12633 hw_last=12633 | |
work_busy is dodgy -- see your local kernel hacker | |
[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-50)@ 180.970549 -> 180.970549 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=24, diff=0, hw=12633 hw_last=12633 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-63)@ 180.987549 -> 180.987549 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=24, diff=1, hw=12634 hw_last=12633 | |
[drm:vblank_disable_fn] disabling vblank on crtc 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-57)@ 180.987549 -> 180.987549 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=25, diff=0, hw=12634 hw_last=12634 | |
[drm:intel_power_well_disable] disabling display | |
[drm:hsw_set_power_well] Requesting to disable the power well | |
[drm:intel_connector_check_state] [CONNECTOR:37:eDP-1] | |
[drm:check_encoder_state] [ENCODER:36:TMDS-36] | |
[drm:check_encoder_state] [ENCODER:45:TMDS-45] | |
[drm:drm_property_unreference_blob] 0xfffff80043293300: blob ID: 48 (1) | |
[drm:check_crtc_state] [CRTC:26] | |
[drm:check_shared_dpll_state] WRPLL 1 | |
[drm:check_shared_dpll_state] WRPLL 2 | |
[drm:check_shared_dpll_state] SPLL | |
[drm:drm_atomic_state_default_clear] Clearing atomic state 0xfffff8000b019600 | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_atomic_state_free] Freeing atomic state 0xfffff8000b019600 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_fb_helper_hotplug_event] | |
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] | |
[drm:intel_dp_detect] [CONNECTOR:37:eDP-1] | |
[drm:intel_dp_get_dpcd] DPCD: fffff800931de106h | |
[drm:intel_dp_probe_oui] Sink OUI: 0022b9 | |
[drm:intel_dp_get_dpcd] Detected EDP PSR Panel. | |
[drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no | |
[drm:intel_dp_probe_oui] Branch OUI: 000000 | |
[drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 | |
[drm:intel_dp_print_rates] sink rates: 162000, 270000 | |
[drm:intel_dp_print_rates] common rates: 162000, 270000 | |
[drm:drm_property_unreference_blob] 0xfffff800431a4b00: blob ID: 50 (1) | |
[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc. | |
[drm:drm_edid_to_eld] ELD: no CEA Extension found | |
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : | |
[drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 142900 1920 1968 2000 2082 1080 1082 1087 1144 0x48 0x9 | |
[drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 114300 1920 1968 2000 2082 1080 1082 1087 1144 0x40 0x9 | |
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] | |
[drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-1] | |
[drm:intel_hdmi_detect] HDMI live status down | |
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected | |
[drm:drm_setup_crtcs] | |
[drm:drm_enable_connectors] connector 37 enabled? yes | |
[drm:drm_enable_connectors] connector 46 enabled? no | |
[drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 | |
[drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 | |
[drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080 | |
[drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping | |
[drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) | |
[drm:drm_atomic_state_init] Allocated atomic state 0xfffff8000b019600 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-0] 0xfffff80043293900 state to 0xfffff8000b019600 | |
[drm:drm_property_reference_blob] 0xfffff80043351700: blob ID: 51 (1) | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:26:crtc-0] 0xfffff8000b70c000 state to 0xfffff8000b019600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:25:plane-1] 0xfffff800431a4b00 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff800431a4b00 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff800431a4b00 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:27:plane-2] 0xfffff80043351100 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80043351100 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80043351100 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:28:plane-3] 0xfffff8004325ce00 state to 0xfffff8000b019600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:29:plane-4] 0xfffff8000b19f200 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b19f200 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b19f200 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:31:plane-5] 0xfffff8000b8cf900 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b8cf900 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b8cf900 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:32:plane-6] 0xfffff80043369800 state to 0xfffff8000b019600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:33:plane-7] 0xfffff80043351c00 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80043351c00 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80043351c00 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:35:plane-8] 0xfffff800433fa000 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff800433fa000 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff800433fa000 | |
[drm:drm_property_unreference_blob] 0xfffff80043351700: blob ID: 51 (2) | |
[drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 0xfffff8000b70c000 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80043293900 to [CRTC:26:crtc-0] | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_set_fb_for_plane] Set [FB:49] for plane state 0xfffff80043293900 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:crtc-0] to 0xfffff8000b019600 | |
[drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] 0xfffff800439cf020 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff800439cf020 to [NOCRTC] | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff800439cf020 to [CRTC:26:crtc-0] | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:30:crtc-1] 0xfffff8004329e000 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff8004329e000 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8004325ce00 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8004325ce00 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:crtc-1] to 0xfffff8000b019600 | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:34:crtc-2] 0xfffff8004329e400 state to 0xfffff8000b019600 | |
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff8004329e400 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80043369800 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80043369800 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:crtc-2] to 0xfffff8000b019600 | |
[drm:drm_atomic_check_only] checking 0xfffff8000b019600 | |
[drm:update_connector_routing] Updating routing for [CONNECTOR:37:eDP-1] | |
[drm:update_connector_routing] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:TMDS-36], now on [CRTC:26:crtc-0] | |
[drm:intel_plane_atomic_calc_changes] [CRTC:26] has [PLANE:23] with fb 49 | |
[drm:intel_plane_atomic_calc_changes] [PLANE:23] visible 1 -> 1, off 0, on 0, ms 0 | |
[drm:drm_atomic_commit] commiting 0xfffff8000b019600 | |
[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x5 p(0,98)@ 181.73549 -> 181.73549 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=25, diff=5, hw=12639 hw_last=12634 | |
[drm:vblank_disable_fn] disabling vblank on crtc 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x5 p(0,103)@ 181.73549 -> 181.73549 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=30, diff=0, hw=12639 hw_last=12639 | |
[drm:drm_atomic_state_default_clear] Clearing atomic state 0xfffff8000b019600 | |
[drm:drm_property_unreference_blob] 0xfffff80043351700: blob ID: 51 (1) | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_atomic_state_free] Freeing atomic state 0xfffff8000b019600 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:intel_print_rc6_info] Enabling RC6 states: RC6 on | |
ACPI Error: [\134_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-391) | |
ACPI Error: Method parse/execution failed [\134_TZ.TZ00._TMP] (Node 0xfffff8000480fc40), AE_NOT_FOUND (20160422/psparse-559) | |
ACPI Error: [\134_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-391) | |
ACPI Error: Method parse/execution failed [\134_TZ.TZ01._TMP] (Node 0xfffff8000480fb00), AE_NOT_FOUND (20160422/psparse-559) | |
[drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off | |
[drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 | |
ACPI Error: [\134_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-391) | |
ACPI Error: Method parse/execution failed [\134_TZ.TZ00._TMP] (Node 0xfffff8000480fc40), AE_NOT_FOUND (20160422/psparse-559) | |
ACPI Error: [\134_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-391) | |
ACPI Error: Method parse/execution failed [\134_TZ.TZ01._TMP] (Node 0xfffff8000480fb00), AE_NOT_FOUND (20160422/psparse-559) | |
ACPI Error: [\134_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-391) | |
ACPI Error: Method parse/execution failed [\134_TZ.TZ00._TMP] (Node 0xfffff8000480fc40), AE_NOT_FOUND (20160422/psparse-559) | |
ACPI Error: [\134_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-391) | |
ACPI Error: Method parse/execution failed [\134_TZ.TZ01._TMP] (Node 0xfffff8000480fb00), AE_NOT_FOUND (20160422/psparse-559) | |
[drm:drm_atomic_state_init] Allocated atomic state 0xfffff8000b13e800 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-0] 0xfffff800045bb800 state to 0xfffff8000b13e800 | |
[drm:drm_property_reference_blob] 0xfffff80043293300: blob ID: 50 (1) | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:26:crtc-0] 0xfffff8000b607c00 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:25:plane-1] 0xfffff8000ba5b800 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000ba5b800 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000ba5b800 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:27:plane-2] 0xfffff8000b679c00 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b679c00 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b679c00 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:28:plane-3] 0xfffff8000b677000 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:29:plane-4] 0xfffff8000b92f400 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b92f400 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b92f400 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:31:plane-5] 0xfffff8000b9fe700 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b9fe700 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b9fe700 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:32:plane-6] 0xfffff8000b18bd00 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:33:plane-7] 0xfffff800431af900 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff800431af900 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff800431af900 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:35:plane-8] 0xfffff800433fb300 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff800433fb300 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff800433fb300 | |
[drm:drm_property_unreference_blob] 0xfffff80043293300: blob ID: 50 (2) | |
[drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 0xfffff8000b607c00 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff800045bb800 to [CRTC:26:crtc-0] | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_set_fb_for_plane] Set [FB:49] for plane state 0xfffff800045bb800 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:crtc-0] to 0xfffff8000b13e800 | |
[drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] 0xfffff80043d05a80 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff80043d05a80 to [NOCRTC] | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff80043d05a80 to [CRTC:26:crtc-0] | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:30:crtc-1] 0xfffff8000b711000 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff8000b711000 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b677000 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b677000 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:crtc-1] to 0xfffff8000b13e800 | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:34:crtc-2] 0xfffff80043c73800 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff80043c73800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b18bd00 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b18bd00 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:crtc-2] to 0xfffff8000b13e800 | |
[drm:drm_atomic_check_only] checking 0xfffff8000b13e800 | |
[drm:update_connector_routing] Updating routing for [CONNECTOR:37:eDP-1] | |
[drm:update_connector_routing] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:TMDS-36], now on [CRTC:26:crtc-0] | |
[drm:intel_plane_atomic_calc_changes] [CRTC:26] has [PLANE:23] with fb 49 | |
[drm:intel_plane_atomic_calc_changes] [PLANE:23] visible 1 -> 1, off 0, on 0, ms 0 | |
[drm:drm_atomic_commit] commiting 0xfffff8000b13e800 | |
[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-56)@ 206.151547 -> 206.151547 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=30, diff=57, hw=12696 hw_last=12639 | |
[drm:vblank_disable_fn] disabling vblank on crtc 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-56)@ 206.151547 -> 206.151547 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=87, diff=0, hw=12696 hw_last=12696 | |
[drm:drm_atomic_state_default_clear] Clearing atomic state 0xfffff8000b13e800 | |
[drm:drm_property_unreference_blob] 0xfffff80043293300: blob ID: 50 (1) | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_atomic_state_free] Freeing atomic state 0xfffff8000b13e800 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_atomic_state_init] Allocated atomic state 0xfffff8000b13ea00 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-0] 0xfffff8000b9d8500 state to 0xfffff8000b13ea00 | |
[drm:drm_property_reference_blob] 0xfffff8000b9f0400: blob ID: 51 (1) | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:26:crtc-0] 0xfffff8004329e400 state to 0xfffff8000b13ea00 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:25:plane-1] 0xfffff8000b8cf900 state to 0xfffff8000b13ea00 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b8cf900 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b8cf900 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:27:plane-2] 0xfffff8000b19f200 state to 0xfffff8000b13ea00 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b19f200 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b19f200 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:28:plane-3] 0xfffff8000b9d7d00 state to 0xfffff8000b13ea00 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:29:plane-4] 0xfffff8000b92fa00 state to 0xfffff8000b13ea00 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b92fa00 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b92fa00 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:31:plane-5] 0xfffff80043369800 state to 0xfffff8000b13ea00 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80043369800 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80043369800 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:32:plane-6] 0xfffff8000ba43a00 state to 0xfffff8000b13ea00 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:33:plane-7] 0xfffff8000b19d200 state to 0xfffff8000b13ea00 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b19d200 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b19d200 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:35:plane-8] 0xfffff8000ba5a400 state to 0xfffff8000b13ea00 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000ba5a400 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000ba5a400 | |
[drm:drm_property_unreference_blob] 0xfffff8000b9f0400: blob ID: 51 (2) | |
[drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 0xfffff8004329e400 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b9d8500 to [CRTC:26:crtc-0] | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_set_fb_for_plane] Set [FB:49] for plane state 0xfffff8000b9d8500 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:crtc-0] to 0xfffff8000b13ea00 | |
[drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] 0xfffff80043d05940 state to 0xfffff8000b13ea00 | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff80043d05940 to [NOCRTC] | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff80043d05940 to [CRTC:26:crtc-0] | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:30:crtc-1] 0xfffff8004329e000 state to 0xfffff8000b13ea00 | |
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff8004329e000 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b9d7d00 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b9d7d00 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:crtc-1] to 0xfffff8000b13ea00 | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:34:crtc-2] 0xfffff8000b70c000 state to 0xfffff8000b13ea00 | |
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff8000b70c000 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000ba43a00 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000ba43a00 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:crtc-2] to 0xfffff8000b13ea00 | |
[drm:drm_atomic_check_only] checking 0xfffff8000b13ea00 | |
[drm:update_connector_routing] Updating routing for [CONNECTOR:37:eDP-1] | |
[drm:update_connector_routing] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:TMDS-36], now on [CRTC:26:crtc-0] | |
[drm:intel_plane_atomic_calc_changes] [CRTC:26] has [PLANE:23] with fb 49 | |
[drm:intel_plane_atomic_calc_changes] [PLANE:23] visible 1 -> 1, off 0, on 0, ms 0 | |
[drm:drm_atomic_commit] commiting 0xfffff8000b13ea00 | |
[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-56)@ 211.367548 -> 211.367548 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=87, diff=22, hw=12718 hw_last=12696 | |
[drm:vblank_disable_fn] disabling vblank on crtc 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-56)@ 211.367548 -> 211.367548 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=109, diff=0, hw=12718 hw_last=12718 | |
[drm:drm_atomic_state_default_clear] Clearing atomic state 0xfffff8000b13ea00 | |
[drm:drm_property_unreference_blob] 0xfffff8000b9f0400: blob ID: 51 (1) | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_atomic_state_free] Freeing atomic state 0xfffff8000b13ea00 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
ACPI Error: [\134_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-391) | |
ACPI Error: Method parse/execution failed [\134_TZ.TZ00._TMP] (Node 0xfffff8000480fc40), AE_NOT_FOUND (20160422/psparse-559) | |
ACPI Error: [\134_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-391) | |
ACPI Error: Method parse/execution failed [\134_TZ.TZ01._TMP] (Node 0xfffff8000480fb00), AE_NOT_FOUND (20160422/psparse-559) | |
ACPI Error: [\134_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-391) | |
ACPI Error: Method parse/execution failed [\134_TZ.TZ00._TMP] (Node 0xfffff8000480fc40), AE_NOT_FOUND (20160422/psparse-559) | |
ACPI Error: [\134_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-391) | |
ACPI Error: Method parse/execution failed [\134_TZ.TZ01._TMP] (Node 0xfffff8000480fb00), AE_NOT_FOUND (20160422/psparse-559) | |
ACPI Error: [\134_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-391) | |
ACPI Error: Method parse/execution failed [\134_TZ.TZ00._TMP] (Node 0xfffff8000480fc40), AE_NOT_FOUND (20160422/psparse-559) | |
ACPI Error: [\134_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-391) | |
ACPI Error: Method parse/execution failed [\134_TZ.TZ01._TMP] (Node 0xfffff8000480fb00), AE_NOT_FOUND (20160422/psparse-559) | |
[drm:drm_atomic_state_init] Allocated atomic state 0xfffff8000b13e800 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-0] 0xfffff8000b834900 state to 0xfffff8000b13e800 | |
[drm:drm_property_reference_blob] 0xfffff800431a5100: blob ID: 50 (1) | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:26:crtc-0] 0xfffff8000b711000 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:25:plane-1] 0xfffff8000ba43700 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000ba43700 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000ba43700 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:27:plane-2] 0xfffff8000b9f0400 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b9f0400 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b9f0400 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:28:plane-3] 0xfffff8000b92f400 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:29:plane-4] 0xfffff800433fa000 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff800433fa000 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff800433fa000 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:31:plane-5] 0xfffff8000ba43200 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000ba43200 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000ba43200 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:32:plane-6] 0xfffff80043293400 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:33:plane-7] 0xfffff8000b67a300 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b67a300 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b67a300 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:35:plane-8] 0xfffff80043293700 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80043293700 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80043293700 | |
[drm:drm_property_unreference_blob] 0xfffff800431a5100: blob ID: 50 (2) | |
[drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 0xfffff8000b711000 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b834900 to [CRTC:26:crtc-0] | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_set_fb_for_plane] Set [FB:49] for plane state 0xfffff8000b834900 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:crtc-0] to 0xfffff8000b13e800 | |
[drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] 0xfffff80043d05120 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff80043d05120 to [NOCRTC] | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff80043d05120 to [CRTC:26:crtc-0] | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:30:crtc-1] 0xfffff8000b607c00 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff8000b607c00 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff8000b92f400 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff8000b92f400 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:crtc-1] to 0xfffff8000b13e800 | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:34:crtc-2] 0xfffff80043c73400 state to 0xfffff8000b13e800 | |
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff80043c73400 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80043293400 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80043293400 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:crtc-2] to 0xfffff8000b13e800 | |
[drm:drm_atomic_check_only] checking 0xfffff8000b13e800 | |
[drm:update_connector_routing] Updating routing for [CONNECTOR:37:eDP-1] | |
[drm:update_connector_routing] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:TMDS-36], now on [CRTC:26:crtc-0] | |
[drm:intel_plane_atomic_calc_changes] [CRTC:26] has [PLANE:23] with fb 49 | |
[drm:intel_plane_atomic_calc_changes] [PLANE:23] visible 1 -> 1, off 0, on 0, ms 0 | |
[drm:drm_atomic_commit] commiting 0xfffff8000b13e800 | |
[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-56)@ 233.644546 -> 233.644546 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=109, diff=54, hw=12772 hw_last=12718 | |
[drm:vblank_disable_fn] disabling vblank on crtc 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x7 p(0,-56)@ 233.644546 -> 233.644546 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=163, diff=0, hw=12772 hw_last=12772 | |
[drm:drm_atomic_state_default_clear] Clearing atomic state 0xfffff8000b13e800 | |
[drm:drm_property_unreference_blob] 0xfffff800431a5100: blob ID: 50 (1) | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_atomic_state_free] Freeing atomic state 0xfffff8000b13e800 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_stub_open] | |
[drm:drm_open_helper] pid = 100606, minor = 0 | |
[drm:i915_gem_open] | |
[drm:drm_setup] | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_VERSION | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_VERSION | |
[drm:drm_release] open_count = 1 | |
[drm:drm_release] pid = 100606, device = 0xe200, open_count = 1 | |
[drm:drm_lastclose] | |
[drm:drm_atomic_state_init] Allocated atomic state 0xfffff8000b13e600 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-0] 0xfffff80093942a00 state to 0xfffff8000b13e600 | |
[drm:drm_property_reference_blob] 0xfffff8000ba9ec00: blob ID: 51 (1) | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:26:crtc-0] 0xfffff8000b70bc00 state to 0xfffff8000b13e600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:25:plane-1] 0xfffff80093942900 state to 0xfffff8000b13e600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80093942900 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80093942900 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:27:plane-2] 0xfffff80093942800 state to 0xfffff8000b13e600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80093942800 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80093942800 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:28:plane-3] 0xfffff80093942700 state to 0xfffff8000b13e600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:29:plane-4] 0xfffff80093942600 state to 0xfffff8000b13e600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80093942600 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80093942600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:31:plane-5] 0xfffff80093942500 state to 0xfffff8000b13e600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80093942500 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80093942500 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:32:plane-6] 0xfffff80093942400 state to 0xfffff8000b13e600 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:33:plane-7] 0xfffff80093942300 state to 0xfffff8000b13e600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80093942300 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80093942300 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:35:plane-8] 0xfffff80093942200 state to 0xfffff8000b13e600 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80093942200 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80093942200 | |
[drm:drm_property_unreference_blob] 0xfffff8000ba9ec00: blob ID: 51 (2) | |
[drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 0xfffff8000b70bc00 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80093942a00 to [CRTC:26:crtc-0] | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_set_fb_for_plane] Set [FB:49] for plane state 0xfffff80093942a00 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:crtc-0] to 0xfffff8000b13e600 | |
[drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] 0xfffff800439c5260 state to 0xfffff8000b13e600 | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff800439c5260 to [NOCRTC] | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff800439c5260 to [CRTC:26:crtc-0] | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:30:crtc-1] 0xfffff8000b4fb400 state to 0xfffff8000b13e600 | |
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff8000b4fb400 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80093942700 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80093942700 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:30:crtc-1] to 0xfffff8000b13e600 | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:34:crtc-2] 0xfffff8000b4fb800 state to 0xfffff8000b13e600 | |
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state 0xfffff8000b4fb800 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80093942400 to [NOCRTC] | |
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state 0xfffff80093942400 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:34:crtc-2] to 0xfffff8000b13e600 | |
[drm:drm_atomic_check_only] checking 0xfffff8000b13e600 | |
[drm:update_connector_routing] Updating routing for [CONNECTOR:37:eDP-1] | |
[drm:update_connector_routing] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:TMDS-36], now on [CRTC:26:crtc-0] | |
[drm:intel_plane_atomic_calc_changes] [CRTC:26] has [PLANE:23] with fb 49 | |
[drm:intel_plane_atomic_calc_changes] [PLANE:23] visible 1 -> 1, off 0, on 0, ms 0 | |
[drm:drm_atomic_commit] commiting 0xfffff8000b13e600 | |
[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x5 p(0,551)@ 233.654546 -> 233.654546 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=163, diff=1, hw=12773 hw_last=12772 | |
[drm:vblank_disable_fn] disabling vblank on crtc 0 | |
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 0x5 p(0,556)@ 233.654546 -> 233.654546 [e 0 us, 0 rep] | |
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=164, diff=0, hw=12773 hw_last=12773 | |
[drm:drm_atomic_state_default_clear] Clearing atomic state 0xfffff8000b13e600 | |
[drm:drm_property_unreference_blob] 0xfffff8000ba9ec00: blob ID: 51 (1) | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_atomic_state_free] Freeing atomic state 0xfffff8000b13e600 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_lastclose] driver lastclose completed | |
[drm:drm_lastclose] lastclose completed | |
[drm:drm_stub_open] | |
[drm:drm_open_helper] pid = 100606, minor = 0 | |
[drm:i915_gem_open] | |
[drm:drm_setup] | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_SET_VERSION | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_GET_UNIQUE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_GET_UNIQUE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_VERSION | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES | |
[drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2] | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_SET_VERSION | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_ADDFB | |
[drm:intel_framebuffer_init] unsupported pixel format: XR15 little-endian (0x35315258) | |
[drm:internal_framebuffer_create] could not create framebuffer | |
[drm:drm_ioctl] ret = -22 | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_RMFB | |
[drm:drm_ioctl] ret = -2 | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_GEM_CLOSE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_ADDFB | |
[drm:drm_mode_addfb2] [FB:51] | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_RMFB | |
[drm:drm_framebuffer_unreference] 0xfffff8000b92f400: FB ID: 51 (1) | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_GEM_CLOSE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_GET_CAP | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_SET_CACHING | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_GEM_CLOSE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_EXECBUFFER2 | |
[drm:i915_gem_execbuffer2] copy 1 exec entries failed 56 | |
[drm:drm_ioctl] ret = -14 | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_THROTTLE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_PIN | |
[drm:drm_ioctl] ret = -19 | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_GEM_CLOSE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_GET_APERTURE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_SET_TILING | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_GET_TILING | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_GEM_CLOSE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES | |
[drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2] | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETRESOURCES | |
[drm:drm_mode_getresources] [CRTC:26:crtc-0] | |
[drm:drm_mode_getresources] [CRTC:30:crtc-1] | |
[drm:drm_mode_getresources] [CRTC:34:crtc-2] | |
[drm:drm_mode_getresources] [ENCODER:36:TMDS-36] | |
[drm:drm_mode_getresources] [ENCODER:45:TMDS-45] | |
[drm:drm_mode_getresources] [CONNECTOR:37:eDP-1] | |
[drm:drm_mode_getresources] [CONNECTOR:46:HDMI-A-1] | |
[drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2] | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GET_PIPE_FROM_CRTC_ID | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANERESOURCES | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANERESOURCES | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GET_PIPE_FROM_CRTC_ID | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANERESOURCES | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANERESOURCES | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GET_PIPE_FROM_CRTC_ID | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANERESOURCES | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANERESOURCES | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR | |
[drm:drm_mode_getconnector] [CONNECTOR:37:?] | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR | |
[drm:drm_mode_getconnector] [CONNECTOR:37:?] | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR | |
[drm:drm_mode_getconnector] [CONNECTOR:46:?] | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETENCODER | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCONNECTOR | |
[drm:drm_mode_getconnector] [CONNECTOR:46:?] | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETGAMMA | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETGAMMA | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETGAMMA | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETPROPERTY | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETPLANERESOURCES | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_GET_APERTURE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_SET_TILING | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_GEM_CLOSE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_REG_READ | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GET_RESET_STATS | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GETPARAM | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_PWRITE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_CREATE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_SET_TILING | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETFB | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_GEM_FLINK | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_GEM_OPEN | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_PWRITE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, I915_GEM_EXECBUFFER2 | |
Bad malloc flags: 0 | |
KDB: stack backtrace: | |
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe0233084a80 | |
malloc() at malloc+0x72/frame 0xfffffe0233084ad0 | |
alloc_gen8_temp_bitmaps() at alloc_gen8_temp_bitmaps+0x40/frame 0xfffffe0233084b20 | |
gen8_alloc_va_range_3lvl() at gen8_alloc_va_range_3lvl+0x1de/frame 0xfffffe0233084d10 | |
gen8_alloc_va_range_4lvl() at gen8_alloc_va_range_4lvl+0x22e/frame 0xfffffe0233084e20 | |
gen8_alloc_va_range() at gen8_alloc_va_range+0x52/frame 0xfffffe0233084e70 | |
i915_vma_bind() at i915_vma_bind+0x1ab/frame 0xfffffe0233084ec0 | |
i915_gem_object_bind_to_vm() at i915_gem_object_bind_to_vm+0x9d3/frame 0xfffffe0233085070 | |
i915_gem_object_do_pin() at i915_gem_object_do_pin+0x5d3/frame 0xfffffe02330851a0 | |
i915_gem_object_pin() at i915_gem_object_pin+0x62/frame 0xfffffe02330851e0 | |
i915_gem_execbuffer_reserve_vma() at i915_gem_execbuffer_reserve_vma+0x14b/frame 0xfffffe0233085230 | |
i915_gem_execbuffer_reserve() at i915_gem_execbuffer_reserve+0x44d/frame 0xfffffe02330853a0 | |
i915_gem_do_execbuffer() at i915_gem_do_execbuffer+0x574/frame 0xfffffe0233085530 | |
i915_gem_execbuffer2() at i915_gem_execbuffer2+0x294/frame 0xfffffe02330855b0 | |
drm_ioctl() at drm_ioctl+0x530/frame 0xfffffe0233085700 | |
linux_dev_ioctl() at linux_dev_ioctl+0x148/frame 0xfffffe0233085800 | |
devfs_ioctl_f() at devfs_ioctl_f+0x156/frame 0xfffffe0233085860 | |
kern_ioctl() at kern_ioctl+0x246/frame 0xfffffe02330858c0 | |
sys_ioctl() at sys_ioctl+0x171/frame 0xfffffe02330859a0 | |
amd64_syscall() at amd64_syscall+0x2db/frame 0xfffffe0233085ab0 | |
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0233085ab0 | |
--- syscall (54, FreeBSD ELF64, sys_ioctl), rip = 0x8024fc9ba, rsp = 0x7fffffffe738, rbp = 0x7fffffffe760 --- | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_GEM_CLOSE | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_SET_MASTER | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETGAMMA | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_ADDFB | |
[drm:drm_mode_addfb2] [FB:51] | |
[drm:drm_ioctl] pid=100606, dev=0xe200, auth=1, DRM_IOCTL_MODE_SETCRTC | |
[drm:drm_mode_setcrtc] [CRTC:26:crtc-0] | |
[drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] | |
[drm:drm_atomic_state_init] Allocated atomic state 0xfffff8000b01aa00 | |
[drm:drm_property_reference_blob] 0xfffff80093942100: blob ID: 50 (1) | |
[drm:drm_atomic_get_crtc_state] Added [CRTC:26:crtc-0] 0xfffff80043c73400 state to 0xfffff8000b01aa00 | |
[drm:drm_framebuffer_reference] 0xfffff8000ba9e300: FB ID: 49 (3) | |
[drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-0] 0xfffff80093978900 state to 0xfffff8000b01aa00 | |
[drm:drm_property_unreference_blob] 0xfffff80093942100: blob ID: 50 (2) | |
[drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state 0xfffff80043c73400 | |
[drm:drm_atomic_set_crtc_for_plane] Link plane state 0xfffff80093978900 to [CRTC:26:crtc-0] | |
[drm:drm_framebuffer_unreference] 0xfffff8000ba9e300: FB ID: 49 (4) | |
[drm:drm_framebuffer_reference] 0xfffff80093978700: FB ID: 51 (2) | |
[drm:drm_atomic_set_fb_for_plane] Set [FB:51] for plane state 0xfffff80093978900 | |
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:crtc-0] to 0xfffff8000b01aa00 | |
[drm:drm_atomic_get_connector_state] Added [CONNECTOR:37] 0xfffff8004328f480 state to 0xfffff8000b01aa00 | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff8004328f480 to [NOCRTC] | |
[drm:drm_atomic_set_crtc_for_connector] Link connector state 0xfffff8004328f480 to [CRTC:26:crtc-0] | |
[drm:drm_atomic_check_only] checking 0xfffff8000b01aa00 | |
[drm:update_connector_routing] Updating routing for [CONNECTOR:37:eDP-1] | |
[drm:update_connector_routing] [CONNECTOR:37:eDP-1] keeps [ENCODER:36:TMDS-36], now on [CRTC:26:crtc-0] | |
[drm:intel_plane_atomic_calc_changes] [CRTC:26] has [PLANE:23] with fb 51 | |
[drm:intel_plane_atomic_calc_changes] [PLANE:23] visible 1 -> 1, off 0, on 0, ms 0 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:25:plane-1] 0xfffff80093978b00 state to 0xfffff8000b01aa00 | |
[drm:drm_atomic_get_plane_state] Added [PLANE:27:plane-2] 0xfffff80093978c00 state to 0xfffff8000b01aa00 | |
[drm:drm_atomic_commit] commiting 0xfffff8000b01aa00 | |
io_schedule_timeout is dodgy -- see your local kernel hacker |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment