Skip to content

Instantly share code, notes, and snippets.

View nehamalcom's full-sized avatar
🏠
Working from home

Neha Malcom Francis nehamalcom

🏠
Working from home
  • Texas Instruments
  • Bangalore
  • 06:10 (UTC +05:30)
  • X @NehaMalcom
View GitHub Profile
@nehamalcom
nehamalcom / am68_sk-fs
Created May 10, 2024 08:01
J7* - ECC disabled
U-Boot SPL 2024.07-rc2-00079-g464718e7a91 (May 09 2024 - 18:17:11 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
EEPROM not available at 0x50, trying to read at 0x51
SPL initial stack usage: 13480 bytes
Trying to boot from UART
CLoaded 1050363 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...
@nehamalcom
nehamalcom / am68_sk-fs
Last active May 10, 2024 07:56
J7* - ECC enabled
U-Boot SPL 2024.07-rc2-00077-g4790f844623 (May 09 2024 - 17:46:25 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
EEPROM not available at 0x50, trying to read at 0x51
ECC is enabled, priming DDR which will take several seconds.
ECC: priming DDR completed in 2395 msec
ECC is enabled, priming DDR which will take several seconds.
Loaded 1050363 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...
@nehamalcom
nehamalcom / am68_sk-fs
Created May 7, 2024 12:10
arm64: ti: Add tps6287 nodes
U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
EEPROM not available at 0x50, trying to read at 0x51
SPL initial stack usage: 13472 bytes
Trying to boot from UART
CLoaded 1092191 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...
@nehamalcom
nehamalcom / j7200-hsse-sr2
Last active April 25, 2024 21:58
Generate all SR boot binaries
U-Boot SPL 2024.04-00951-g4be1fae7929 (Apr 23 2024 - 02:40:51 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.3--v09.02.03 (Kool Koala)')
Trying to boot from UART
CLoaded 1010251 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty
NOTICE: BL31: Built : 09:34:15, Aug 24 2023
@nehamalcom
nehamalcom / j7200-evm
Last active April 12, 2024 05:30
arm64: dts: ti: k3-j7*: v2: Add missing ESM and watchdog nodes
U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
Trying to boot from UART
CWarning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1031931 bytes
Loading Environment from nowhere... OK
@nehamalcom
nehamalcom / am62axx-sk-fs
Created March 22, 2024 13:07
Cleanup K3 binman templating
U-Boot SPL 2024.04-rc3-00190-g4e4e3bb0a08 (Mar 22 2024 - 13:17:41 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.5--v09.02.05 (Kool Koala)')
SPL initial stack usage: 13568 bytes
Trying to boot from UART
CLoaded 1270731 bytes
Starting ATF on ARM64 core...
NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty
NOTICE: BL31: Built : 09:34:15, Aug 24 2023
@nehamalcom
nehamalcom / j721e-evm
Created February 28, 2024 10:45
RFC: Cleanup J721E EVM and SK
U-Boot SPL 2024.04-rc3-75514-gd15518c451f-dirty (Feb 28 2024 - 15:12:52 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.9--v09.01.09 (Kool Koala)')
Trying to boot from UART
Ce on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1048943 bytes
@nehamalcom
nehamalcom / am62xx-sk
Created February 22, 2024 06:37
arch: mach-k3: fix mapping higher DDR addresses as device memory
U-Boot SPL 2024.01-rc6-00747-g6922ccb6b9 (Feb 21 2024 - 16:10:28 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)')
SPL initial stack usage: 13400 bytes
Trying to boot from UART
icate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 828247 bytes
@nehamalcom
nehamalcom / am69_sk-fs
Last active January 30, 2024 10:17
v2 resend - arm: mach-k3: j721s2_init: Support less than max DDR controllers
U-Boot SPL 2024.04-rc1-00001-g4d84170cf5-dirty (Jan 30 2024 - 15:36:17 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)')
EEPROM not available at 0x50, trying to read at 0x51
SPL initial stack usage: 13448 bytes
Trying to boot from UART
CLoaded 1005811 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...
@nehamalcom
nehamalcom / am68_sk-fs
Created January 30, 2024 07:34
arm: mach-k3: j721s2_init: Support less than max DDR controllers
U-Boot SPL 2024.04-rc1-00001-geb9f427806 (Jan 30 2024 - 12:45:39 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)')
EEPROM not available at 0x50, trying to read at 0x51
SPL initial stack usage: 13448 bytes
Trying to boot from UART
CLoaded 1005811 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...