Created
June 21, 2021 00:07
-
-
Save neheb/1feb87f4bec673bbc99457eeb5720cca to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
1 | |
2 Sun Jun 6 00:52:32 PDT 2021 | Helios4 | 21.05.2 | armhf | armv7l | 5.10.34-mvebu | |
3 | |
4 ### dmesg: | |
5 | |
6 [ 0.000000] Booting Linux on physical CPU 0x0 | |
7 [ 0.000000] Linux version 5.10.34-mvebu (root@hirsute) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) XXX.XXX.0.20190321) #21.05.1 SMP Thu May 6 20:42:08 UTC 2021 | |
8 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=50c5387d | |
9 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
10 [ 0.000000] OF: fdt: Machine model: Helios4 | |
11 [ 0.000000] Memory policy: Data cache writealloc | |
12 [ 0.000000] cma: Reserved 128 MiB at 0x78000000 | |
13 [ 0.000000] Zone ranges: | |
14 [ 0.000000] Normal [mem 0x0000000000000000-0x000000002fffffff] | |
15 [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] | |
16 [ 0.000000] Movable zone start for each node | |
17 [ 0.000000] Early memory node ranges | |
18 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] | |
19 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] | |
20 [ 0.000000] On node 0 totalpages: 524288 | |
21 [ 0.000000] Normal zone: 1728 pages used for memmap | |
22 [ 0.000000] Normal zone: 0 pages reserved | |
23 [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 | |
24 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:63 | |
25 [ 0.000000] percpu: Embedded 15 pages/cpu s31692 r8192 d21556 u61440 | |
26 [ 0.000000] pcpu-alloc: s31692 r8192 d21556 u61440 alloc=15*4096 | |
27 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 | |
28 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 | |
29 [ 0.000000] Kernel command line: console=ttyS0,115200 root=UUID=8596e2f4-0c13-469b-b2db-742b6a6fe7d4 rootwait rootfstype=ext4 ubootdev=mmc scandelay loglevel=1 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u | |
30 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) | |
31 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
32 [ 0.000000] allocated 2097152 bytes of page_ext | |
33 [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off | |
34 [ 0.000000] Memory: 1919968K/2097152K available (8192K kernel code, 615K rwdata, 2392K rodata, 1024K init, 274K bss, 46112K reserved, 131072K cma-reserved, 1179648K highmem) | |
35 [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x17/0x294 with crng_init=0 | |
36 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
37 [ 0.000000] rcu: Hierarchical RCU implementation. | |
38 [ 0.000000] rcu: RCU event tracing is enabled. | |
39 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. | |
40 [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
41 [ 0.000000] Rude variant of Tasks RCU enabled. | |
42 [ 0.000000] Tracing variant of Tasks RCU enabled. | |
43 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
44 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
45 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
46 [ 0.000000] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000 | |
47 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 | |
48 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 | |
49 [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines | |
50 [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled | |
51 [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB | |
52 [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001 | |
53 [ 0.000007] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns | |
54 [ 0.000016] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns | |
55 [ 0.000028] Switching to timer-based delay loop, resolution 1ns | |
56 [ 0.000180] Ignoring duplicate/late registration of read_current_timer delay | |
57 [ 0.000186] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns | |
58 [ 0.000385] Console: colour dummy device 80x30 | |
59 [ 0.000406] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=3200000) | |
60 [ 0.000414] pid_max: default: 32768 minimum: 301 | |
61 [ 0.000538] LSM: Security Framework initializing | |
62 [ 0.000582] Yama: becoming mindful. | |
63 [ 0.000658] AppArmor: AppArmor initialized | |
64 [ 0.000691] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) | |
65 [ 0.000697] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) | |
66 [ 0.001155] CPU: Testing write buffer coherency: ok | |
67 [ 0.001168] CPU0: Spectre v2: using BPIALL workaround | |
68 [ 0.001268] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
69 [ 0.001511] Setting up static identity map for 0x100000 - 0x100054 | |
70 [ 0.001595] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0xA | |
71 [ 0.001682] mvebu-pmsu: Initializing Power Management Service Unit | |
72 [ 0.001737] rcu: Hierarchical SRCU implementation. | |
73 [ 0.002334] smp: Bringing up secondary CPUs ... | |
74 [ 0.002485] Booting CPU 1 | |
75 [ 0.002653] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
76 [ 0.002657] CPU1: Spectre v2: using BPIALL workaround | |
77 [ 0.002712] smp: Brought up 1 node, 2 CPUs | |
78 [ 0.002716] SMP: Total of 2 processors activated (3200.00 BogoMIPS). | |
79 [ 0.002719] CPU: All CPU(s) started in SVC mode. | |
80 [ 0.003091] devtmpfs: initialized | |
81 [ 0.005381] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
82 [ 0.005475] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
83 [ 0.005491] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
84 [ 0.008174] pinctrl core: initialized pinctrl subsystem | |
85 [ 0.008605] NET: Registered protocol family 16 | |
86 [ 0.012701] DMA: preallocated 2048 KiB pool for atomic coherent allocations | |
87 [ 0.013051] audit: initializing netlink subsys (disabled) | |
88 [ 0.013156] audit: type=2000 audit(0.012:1): state=initialized audit_enabled=0 res=1 | |
89 [ 0.013352] thermal_sys: Registered thermal governor 'step_wise' | |
90 [ 0.013420] cpuidle: using governor ladder | |
91 [ 0.013523] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
92 [ 0.013527] hw-breakpoint: maximum watchpoint size is 4 bytes. | |
93 [ 0.013646] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling | |
94 [ 0.013652] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling | |
95 [ 0.024919] cryptd: max_cpu_qlen set to 1000 | |
96 [ 0.092083] raid6: neonx8 gen() 1644 MB/s | |
97 [ 0.160075] raid6: neonx8 xor() 1087 MB/s | |
98 [ 0.228075] raid6: neonx4 gen() 1957 MB/s | |
99 [ 0.296071] raid6: neonx4 xor() 1372 MB/s | |
100 [ 0.364069] raid6: neonx2 gen() 2465 MB/s | |
101 [ 0.432071] raid6: neonx2 xor() 1610 MB/s | |
102 [ 0.500073] raid6: neonx1 gen() 1914 MB/s | |
103 [ 0.568066] raid6: neonx1 xor() 1345 MB/s | |
104 [ 0.636075] raid6: int32x8 gen() 590 MB/s | |
105 [ 0.704070] raid6: int32x8 xor() 337 MB/s | |
106 [ 0.772070] raid6: int32x4 gen() 682 MB/s | |
107 [ 0.840069] raid6: int32x4 xor() 372 MB/s | |
108 [ 0.908068] raid6: int32x2 gen() 804 MB/s | |
109 [ 0.976094] raid6: int32x2 xor() 348 MB/s | |
110 [ 1.044093] raid6: int32x1 gen() 688 MB/s | |
111 [ 1.112096] raid6: int32x1 xor() 281 MB/s | |
112 [ 1.112099] raid6: using algorithm neonx2 gen() 2465 MB/s | |
113 [ 1.112102] raid6: .... xor() 1610 MB/s, rmw enabled | |
114 [ 1.112105] raid6: using neon recovery algorithm | |
115 [ 1.112458] 3P3V: supplied by power_brick_12V | |
116 [ 1.112631] 5V_HDD: supplied by power_brick_12V | |
117 [ 1.112856] vgaarb: loaded | |
118 [ 1.113007] SCSI subsystem initialized | |
119 [ 1.113070] libata version 3.00 loaded. | |
120 [ 1.113156] usbcore: registered new interface driver usbfs | |
121 [ 1.113174] usbcore: registered new interface driver hub | |
122 [ 1.113194] usbcore: registered new device driver usb | |
123 [ 1.113580] NetLabel: Initializing | |
124 [ 1.113583] NetLabel: domain hash size = 128 | |
125 [ 1.113585] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
126 [ 1.113619] NetLabel: unlabeled traffic allowed by default | |
127 [ 1.113793] clocksource: Switched to clocksource arm_global_timer | |
128 [ 1.113944] VFS: Disk quotas dquot_6.6.0 | |
129 [ 1.113980] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
130 [ 1.114210] AppArmor: AppArmor Filesystem Enabled | |
131 [ 1.117038] NET: Registered protocol family 2 | |
132 [ 1.117434] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) | |
133 [ 1.117469] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) | |
134 [ 1.117526] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
135 [ 1.117589] TCP: Hash tables configured (established 8192 bind 8192) | |
136 [ 1.117648] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) | |
137 [ 1.117670] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) | |
138 [ 1.117775] NET: Registered protocol family 1 | |
139 [ 1.118083] RPC: Registered named UNIX socket transport module. | |
140 [ 1.118087] RPC: Registered udp transport module. | |
141 [ 1.118089] RPC: Registered tcp transport module. | |
142 [ 1.118092] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
143 [ 1.118096] NET: Registered protocol family 44 | |
144 [ 1.118103] PCI: CLS 0 bytes, default 64 | |
145 [ 1.118199] Trying to unpack rootfs image as initramfs... | |
146 [ 1.447838] Freeing initrd memory: 10988K | |
147 [ 1.448105] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available | |
148 [ 1.448672] Initialise system trusted keyrings | |
149 [ 1.448691] Key type blacklist registered | |
150 [ 1.448793] workingset: timestamp_bits=14 max_order=19 bucket_order=5 | |
151 [ 1.451113] zbud: loaded | |
152 [ 1.451836] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
153 [ 1.452277] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). | |
154 [ 1.452634] fuse: init (API version 7.32) | |
155 [ 1.453165] integrity: Platform Keyring initialized | |
156 [ 1.510322] xor: measuring software checksum speed | |
157 [ 1.514090] arm4regs : 2620 MB/sec | |
158 [ 1.518990] 8regs : 2009 MB/sec | |
159 [ 1.523800] 32regs : 2046 MB/sec | |
160 [ 1.528982] neon : 1899 MB/sec | |
161 [ 1.528985] xor: using function: arm4regs (2620 MB/sec) | |
162 [ 1.528991] Key type asymmetric registered | |
163 [ 1.528994] Asymmetric key parser 'x509' registered | |
164 [ 1.529069] bounce: pool size: 64 pages | |
165 [ 1.529102] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) | |
166 [ 1.529178] io scheduler mq-deadline registered | |
167 [ 1.529183] io scheduler kyber registered | |
168 [ 1.529298] io scheduler bfq registered | |
169 [ 1.530442] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver | |
170 [ 1.531834] mv_xor f1060800.xor: Marvell shared XOR driver | |
171 [ 1.558210] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) | |
172 [ 1.558335] mv_xor f1060900.xor: Marvell shared XOR driver | |
173 [ 1.586206] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) | |
174 [ 1.586489] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
175 [ 1.587181] printk: console [ttyS0] disabled | |
176 [ 1.607262] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 31, base_baud = 15625000) is a 16550A | |
177 [ 1.607364] printk: console [ttyS0] enabled | |
178 [ 1.610452] loop: module loaded | |
179 [ 1.611051] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy regulator | |
180 [ 1.611123] ahci-mvebu f10a8000.sata: supply phy not found, using dummy regulator | |
181 [ 1.611287] platform f10a8000.sata:sata-port@0: supply target not found, using dummy regulator | |
182 [ 1.611443] platform f10a8000.sata:sata-port@1: supply target not found, using dummy regulator | |
183 [ 1.611520] ahci-mvebu f10a8000.sata: masking port_map 0x3 -> 0x3 | |
184 [ 1.611550] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode | |
185 [ 1.611556] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs | |
186 [ 1.612162] scsi host0: ahci-mvebu | |
187 [ 1.612426] scsi host1: ahci-mvebu | |
188 [ 1.612525] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 51 | |
189 [ 1.612529] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 51 | |
190 [ 1.612621] ahci-mvebu f10e0000.sata: supply ahci not found, using dummy regulator | |
191 [ 1.612686] ahci-mvebu f10e0000.sata: supply phy not found, using dummy regulator | |
192 [ 1.612840] platform f10e0000.sata:sata-port@0: supply target not found, using dummy regulator | |
193 [ 1.612989] platform f10e0000.sata:sata-port@1: supply target not found, using dummy regulator | |
194 [ 1.613058] ahci-mvebu f10e0000.sata: masking port_map 0x3 -> 0x3 | |
195 [ 1.613085] ahci-mvebu f10e0000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode | |
196 [ 1.613091] ahci-mvebu f10e0000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs | |
197 [ 1.613690] scsi host2: ahci-mvebu | |
198 [ 1.613933] scsi host3: ahci-mvebu | |
199 [ 1.614031] ata3: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x100 irq 52 | |
200 [ 1.614036] ata4: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x180 irq 52 | |
201 [ 1.614722] libphy: Fixed MDIO Bus: probed | |
202 [ 1.615142] libphy: orion_mdio_bus: probed | |
203 [ 1.622304] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled | |
204 [ 1.625079] mvneta f1070000.ethernet eth0: Using device tree mac address 0e:a3:d6:0b:52:ab | |
205 [ 1.625345] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
206 [ 1.625370] ehci-pci: EHCI PCI platform driver | |
207 [ 1.625400] ehci-platform: EHCI generic platform driver | |
208 [ 1.625479] ehci-orion: EHCI orion driver | |
209 [ 1.625585] orion-ehci f1058000.usb: EHCI Host Controller | |
210 [ 1.625599] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 | |
211 [ 1.625750] orion-ehci f1058000.usb: irq 47, io mem 0xf1058000 | |
212 [ 1.637825] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 | |
213 [ 1.637926] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
214 [ 1.637931] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
215 [ 1.637934] usb usb1: Product: EHCI Host Controller | |
216 [ 1.637938] usb usb1: Manufacturer: Linux 5.10.34-mvebu ehci_hcd | |
217 [ 1.637941] usb usb1: SerialNumber: f1058000.usb | |
218 [ 1.638194] hub 1-0:1.0: USB hub found | |
219 [ 1.638213] hub 1-0:1.0: 1 port detected | |
220 [ 1.638419] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
221 [ 1.638428] ohci-pci: OHCI PCI platform driver | |
222 [ 1.638451] ohci-platform: OHCI generic platform driver | |
223 [ 1.638785] xhci-hcd f10f0000.usb3: xHCI Host Controller | |
224 [ 1.638795] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2 | |
225 [ 1.638989] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 | |
226 [ 1.639012] xhci-hcd f10f0000.usb3: irq 54, io mem 0xf10f0000 | |
227 [ 1.639152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
228 [ 1.639157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
229 [ 1.639161] usb usb2: Product: xHCI Host Controller | |
230 [ 1.639164] usb usb2: Manufacturer: Linux 5.10.34-mvebu xhci-hcd | |
231 [ 1.639167] usb usb2: SerialNumber: f10f0000.usb3 | |
232 [ 1.639373] hub 2-0:1.0: USB hub found | |
233 [ 1.639388] hub 2-0:1.0: 1 port detected | |
234 [ 1.639526] xhci-hcd f10f0000.usb3: xHCI Host Controller | |
235 [ 1.639535] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3 | |
236 [ 1.639547] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed | |
237 [ 1.639578] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. | |
238 [ 1.639628] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 | |
239 [ 1.639632] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
240 [ 1.639636] usb usb3: Product: xHCI Host Controller | |
241 [ 1.639639] usb usb3: Manufacturer: Linux 5.10.34-mvebu xhci-hcd | |
242 [ 1.639643] usb usb3: SerialNumber: f10f0000.usb3 | |
243 [ 1.639824] hub 3-0:1.0: USB hub found | |
244 [ 1.639838] hub 3-0:1.0: 1 port detected | |
245 [ 1.640068] xhci-hcd f10f8000.usb3: xHCI Host Controller | |
246 [ 1.640078] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4 | |
247 [ 1.640273] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 | |
248 [ 1.640295] xhci-hcd f10f8000.usb3: irq 55, io mem 0xf10f8000 | |
249 [ 1.640428] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
250 [ 1.640434] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
251 [ 1.640437] usb usb4: Product: xHCI Host Controller | |
252 [ 1.640440] usb usb4: Manufacturer: Linux 5.10.34-mvebu xhci-hcd | |
253 [ 1.640444] usb usb4: SerialNumber: f10f8000.usb3 | |
254 [ 1.640637] hub 4-0:1.0: USB hub found | |
255 [ 1.640651] hub 4-0:1.0: 1 port detected | |
256 [ 1.640784] xhci-hcd f10f8000.usb3: xHCI Host Controller | |
257 [ 1.640792] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5 | |
258 [ 1.640803] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed | |
259 [ 1.640832] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. | |
260 [ 1.640886] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 | |
261 [ 1.640891] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
262 [ 1.640894] usb usb5: Product: xHCI Host Controller | |
263 [ 1.640897] usb usb5: Manufacturer: Linux 5.10.34-mvebu xhci-hcd | |
264 [ 1.640901] usb usb5: SerialNumber: f10f8000.usb3 | |
265 [ 1.641084] hub 5-0:1.0: USB hub found | |
266 [ 1.641098] hub 5-0:1.0: 1 port detected | |
267 [ 1.641360] usbcore: registered new interface driver usb-storage | |
268 [ 1.641547] mousedev: PS/2 mouse device common for all mice | |
269 [ 1.642171] armada38x-rtc f10a3800.rtc: registered as rtc0 | |
270 [ 1.642249] armada38x-rtc f10a3800.rtc: setting system clock to 2021-06-06T07:52:20 UTC (1622965940) | |
271 [ 1.642368] i2c /dev entries driver | |
272 [ 1.642878] pca953x 0-0020: supply vcc not found, using dummy regulator | |
273 [ 1.642943] pca953x 0-0020: using no AI | |
274 [ 1.643621] gpio-496 (board-rev-0): hogged as input | |
275 [ 1.643710] gpio-497 (board-rev-1): hogged as input | |
276 [ 1.643797] gpio-501 (usb-overcurrent-status): hogged as input | |
277 [ 1.646043] sdhci: Secure Digital Host Controller Interface driver | |
278 [ 1.646047] sdhci: Copyright(c) Pierre Ossman | |
279 [ 1.646175] sdhci-pltfm: SDHCI platform and OF driver helper | |
280 [ 1.646270] sdhci-pxav3 f10d8000.sdhci: Got CD GPIO | |
281 [ 1.646845] ledtrig-cpu: registered to indicate activity on CPUs | |
282 [ 1.646875] hid: raw HID events driver (C) Jiri Kosina | |
283 [ 1.646941] usbcore: registered new interface driver usbhid | |
284 [ 1.646944] usbhid: USB HID core driver | |
285 [ 1.647146] Initializing XFRM netlink socket | |
286 [ 1.647376] NET: Registered protocol family 10 | |
287 [ 1.668575] Segment Routing with IPv6 | |
288 [ 1.668631] NET: Registered protocol family 17 | |
289 [ 1.668806] ThumbEE CPU extension supported. | |
290 [ 1.668813] Registering SWP/SWPB emulation handler | |
291 [ 1.668934] registered taskstats version 1 | |
292 [ 1.668941] Loading compiled-in X.509 certificates | |
293 [ 1.673113] Loaded X.509 cert 'Build time autogenerated kernel key: 4bcc027928e39a8ca84c86fd18e21f81b5ff8b83' | |
294 [ 1.674249] zswap: loaded using pool zstd/z3fold | |
295 [ 1.674573] Key type ._fscrypt registered | |
296 [ 1.674578] Key type .fscrypt registered | |
297 [ 1.674581] Key type fscrypt-provisioning registered | |
298 [ 1.676298] Btrfs loaded, crc32c=crc32c-generic | |
299 [ 1.678031] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA | |
300 [ 1.687158] Key type encrypted registered | |
301 [ 1.687169] AppArmor: AppArmor sha1 policy hashing enabled | |
302 [ 1.688677] USB-PWR: supplied by power_brick_12V | |
303 [ 1.689048] input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
304 [ 1.710679] mmc0: new high speed SDHC card at address 59b4 | |
305 [ 1.710980] mmcblk0: mmc0:59b4 00000 3.67 GiB | |
306 [ 1.711974] mmcblk0: p1 | |
307 [ 2.005813] usb 5-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd | |
308 [ 2.026357] usb 5-1: New USB device found, idVendor=0781, idProduct=5580, bcdDevice= 0.10 | |
309 [ 2.026362] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
310 [ 2.026366] usb 5-1: Product: Extreme | |
311 [ 2.026369] usb 5-1: Manufacturer: SanDisk | |
312 [ 2.026372] usb 5-1: SerialNumber: AA011008150457010124 | |
313 [ 2.026886] usb-storage 5-1:1.0: USB Mass Storage device detected | |
314 [ 2.027079] scsi host4: usb-storage 5-1:1.0 | |
315 [ 2.089801] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
316 [ 2.089805] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) | |
317 [ 2.089823] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
318 [ 2.089826] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
319 [ 2.090379] ata1.00: ATA-9: WDC WD10JPVX-75JC3T0, 01.01A01, max UDMA/133 | |
320 [ 2.090384] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32) | |
321 [ 2.090399] ata3.00: ATA-9: WDC WD10JPVX-60JC3T0, 01.01A01, max UDMA/133 | |
322 [ 2.090404] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32) | |
323 [ 2.090494] ata4.00: ATA-9: WDC WD10JPVX-75JC3T0, 02.01A02, max UDMA/133 | |
324 [ 2.090498] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32) | |
325 [ 2.090954] ata1.00: configured for UDMA/133 | |
326 [ 2.091040] ata3.00: configured for UDMA/133 | |
327 [ 2.091164] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-75J 1A01 PQ: 0 ANSI: 5 | |
328 [ 2.091203] ata4.00: configured for UDMA/133 | |
329 [ 2.091460] sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
330 [ 2.091529] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) | |
331 [ 2.091534] sd 0:0:0:0: [sda] 4096-byte physical blocks | |
332 [ 2.091560] sd 0:0:0:0: [sda] Write Protect is off | |
333 [ 2.091565] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
334 [ 2.091597] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
335 [ 2.109974] sd 0:0:0:0: [sda] Attached SCSI removable disk | |
336 [ 2.123249] ata2.00: ATA-8: TOSHIBA MQ01ABD100M, AX101U, max UDMA/100 | |
337 [ 2.123255] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32) | |
338 [ 2.124576] ata2.00: configured for UDMA/100 | |
339 [ 2.124730] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 1U PQ: 0 ANSI: 5 | |
340 [ 2.124998] sd 1:0:0:0: Attached scsi generic sg1 type 0 | |
341 [ 2.125065] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) | |
342 [ 2.125070] sd 1:0:0:0: [sdb] 4096-byte physical blocks | |
343 [ 2.125093] sd 1:0:0:0: [sdb] Write Protect is off | |
344 [ 2.125097] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 | |
345 [ 2.125129] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
346 [ 2.125213] scsi 2:0:0:0: Direct-Access ATA WDC WD10JPVX-60J 1A01 PQ: 0 ANSI: 5 | |
347 [ 2.125493] sd 2:0:0:0: Attached scsi generic sg2 type 0 | |
348 [ 2.125548] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) | |
349 [ 2.125553] sd 2:0:0:0: [sdc] 4096-byte physical blocks | |
350 [ 2.125575] sd 2:0:0:0: [sdc] Write Protect is off | |
351 [ 2.125580] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 | |
352 [ 2.125610] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
353 [ 2.125719] scsi 3:0:0:0: Direct-Access ATA WDC WD10JPVX-75J 1A02 PQ: 0 ANSI: 5 | |
354 [ 2.126003] sd 3:0:0:0: Attached scsi generic sg3 type 0 | |
355 [ 2.126195] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) | |
356 [ 2.126201] sd 3:0:0:0: [sdd] 4096-byte physical blocks | |
357 [ 2.126219] sd 3:0:0:0: [sdd] Write Protect is off | |
358 [ 2.126224] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 | |
359 [ 2.126256] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
360 [ 2.173573] sd 3:0:0:0: [sdd] Attached SCSI removable disk | |
361 [ 2.182002] sd 2:0:0:0: [sdc] Attached SCSI removable disk | |
362 [ 2.214236] sd 1:0:0:0: [sdb] Attached SCSI removable disk | |
363 [ 2.214744] Freeing unused kernel memory: 1024K | |
364 [ 2.229936] Run /init as init process | |
365 [ 2.229940] with arguments: | |
366 [ 2.229943] /init | |
367 [ 2.229945] scandelay | |
368 [ 2.229947] with environment: | |
369 [ 2.229950] HOME=/ | |
370 [ 2.229953] TERM=linux | |
371 [ 2.229955] ubootdev=mmc | |
372 [ 2.230114] process '/usr/bin/sh' started with executable stack | |
373 [ 2.546339] usbcore: registered new interface driver uas | |
374 [ 2.563343] random: fast init done | |
375 [ 2.859760] async_tx: api initialized (async) | |
376 [ 3.038138] scsi 4:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6 | |
377 [ 3.038431] scsi 4:0:0:0: Attached scsi generic sg4 type 0 | |
378 [ 3.039887] sd 4:0:0:0: [sde] 61282631 512-byte logical blocks: (31.4 GB/29.2 GiB) | |
379 [ 3.040066] sd 4:0:0:0: [sde] Write Protect is off | |
380 [ 3.040072] sd 4:0:0:0: [sde] Mode Sense: 53 00 00 08 | |
381 [ 3.040243] sd 4:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA | |
382 [ 3.062588] sde: sde1 | |
383 [ 3.063522] sd 4:0:0:0: [sde] Attached SCSI removable disk | |
384 [ 3.261274] random: crng init done | |
385 [ 3.281130] BTRFS: device fsid bfa267c0-df2c-45a6-ad88-9d76b3844326 devid 4 transid 434060 /dev/sdd scanned by btrfs (221) | |
386 [ 3.281321] BTRFS: device fsid bfa267c0-df2c-45a6-ad88-9d76b3844326 devid 3 transid 434060 /dev/sdc scanned by btrfs (221) | |
387 [ 3.281490] BTRFS: device fsid bfa267c0-df2c-45a6-ad88-9d76b3844326 devid 2 transid 434060 /dev/sdb scanned by btrfs (221) | |
388 [ 3.281640] BTRFS: device fsid bfa267c0-df2c-45a6-ad88-9d76b3844326 devid 1 transid 434060 /dev/sda scanned by btrfs (221) | |
389 [ 3.451801] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) | |
390 [ 4.298538] systemd[1]: Inserted module 'autofs4' | |
391 [ 4.359396] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) | |
392 [ 4.359634] systemd[1]: Detected architecture arm. | |
393 [ 4.416048] systemd[1]: Set hostname to <TrapNAS>. | |
394 [ 5.475930] systemd[1]: /lib/systemd/system/systemd-udevd.service:21: Unknown lvalue 'ProtectClock' in section 'Service', ignoring | |
395 [ 5.475952] systemd[1]: /lib/systemd/system/systemd-udevd.service:22: Unknown lvalue 'ProtectHostname' in section 'Service', ignoring | |
396 [ 5.475998] systemd[1]: /lib/systemd/system/systemd-udevd.service:26: Unknown lvalue 'RestrictSUIDSGID' in section 'Service', ignoring | |
397 [ 5.484006] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly. | |
398 [ 5.499305] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly. | |
399 [ 5.552141] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly. | |
400 [ 5.658931] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. | |
401 [ 5.884837] marvell-cesa f1090000.crypto: CESA device successfully registered | |
402 [ 5.942306] lm75 0-004c: supply vs not found, using dummy regulator | |
403 [ 5.942664] lm75 0-004c: hwmon2: sensor 'lm75' | |
404 [ 6.258880] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro | |
405 [ 7.094672] mvneta f1070000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] (irq=POLL) | |
406 [ 7.094963] mvneta f1070000.ethernet eth0: configuring for phy/rgmii-id link mode | |
407 [ 7.148396] at24 0-0053: supply vcc not found, using dummy regulator | |
408 [ 7.154363] at24 0-0053: 256 byte 24c02 EEPROM, writable, 16 bytes/write | |
409 [ 7.230014] orion_wdt: Initial timeout 171 sec | |
410 [ 8.372719] BTRFS info (device sda): disk space caching is enabled | |
411 [ 8.372729] BTRFS info (device sda): has skinny extents | |
412 [ 11.198351] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
413 [ 11.198371] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
414 [ 12.809153] systemd[1]: Mounted /srv/dev-disk-by-id-ata-TOSHIBA_MQ01ABD100M_57L9PD0TT. | |
415 [ 12.836960] systemd[1]: Mounted /home. | |
416 [ 12.883084] systemd[1]: Mounted /var/lib/docker. | |
417 [ 12.898224] systemd[1]: Reached target Local File Systems. | |
418 [ 12.917979] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. | |
419 [ 12.927795] systemd[1]: Starting Cleanup monit state file... | |
420 [ 12.944551] systemd[1]: Starting Armbian ZRAM config... | |
421 [ 12.957982] systemd[1]: Condition check resulted in Set console font and keymap being skipped. | |
422 [ 12.961485] systemd[1]: Starting Cleanup PHP session files... | |
423 [ 12.976603] systemd[1]: Starting Raise network interfaces... | |
424 [ 13.565531] systemd-journald[771]: Received request to flush runtime journal from PID 1 | |
425 | |
426 ### armbian-release: | |
427 | |
428 # PLEASE DO NOT EDIT THIS FILE | |
429 BOARD=helios4 | |
430 BOARD_NAME="Helios4" | |
431 BOARDFAMILY=mvebu | |
432 BUILD_REPOSITORY_URL=git@github.com:armbian/build.git | |
433 BUILD_REPOSITORY_COMMIT=4cc754e0b-dirty | |
434 DISTRIBUTION_CODENAME=buster | |
435 DISTRIBUTION_STATUS=supported | |
436 VERSION=21.05.2 | |
437 LINUXFAMILY=mvebu | |
438 ARCH=arm | |
439 IMAGE_TYPE=stable | |
440 BOARD_TYPE=conf | |
441 INITRD_ARCH=arm | |
442 KERNEL_IMAGE_TYPE=Image | |
443 BRANCH=current | |
444 | |
445 ### boot environment: | |
446 | |
447 verbosity=1 | |
448 eth1addr=0E:A3:D6:0B:52:AB | |
449 spi_workaround=off | |
450 overlay_prefix=armada-388-helios4 | |
451 rootdev=UUID=8596e2f4-0c13-469b-b2db-742b6a6fe7d4 | |
452 rootfstype=ext4 | |
453 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u | |
454 | |
455 ### lsusb: | |
456 | |
457 | |
458 ### lscpu: | |
459 | |
460 Architecture: armv7l | |
461 Byte Order: Little Endian | |
462 CPU(s): 2 | |
463 On-line CPU(s) list: 0,1 | |
464 Thread(s) per core: 1 | |
465 Core(s) per socket: 2 | |
466 Socket(s): 1 | |
467 Vendor ID: ARM | |
468 Model: 1 | |
469 Model name: Cortex-A9 | |
470 Stepping: r4p1 | |
471 BogoMIPS: 1600.00 | |
472 Flags: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 | |
473 | |
474 ### cpuinfo: | |
475 | |
476 processor : 0 | |
477 model name : ARMv7 Processor rev 1 (v7l) | |
478 BogoMIPS : 1600.00 | |
479 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 | |
480 CPU implementer : 0x41 | |
481 CPU architecture: 7 | |
482 CPU variant : 0x4 | |
483 CPU part : 0xc09 | |
484 CPU revision : 1 | |
485 | |
486 processor : 1 | |
487 model name : ARMv7 Processor rev 1 (v7l) | |
488 BogoMIPS : 1600.00 | |
489 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 | |
490 CPU implementer : 0x41 | |
491 CPU architecture: 7 | |
492 CPU variant : 0x4 | |
493 CPU part : 0xc09 | |
494 CPU revision : 1 | |
495 | |
496 Hardware : Marvell Armada 380/385 (Device Tree) | |
497 Revision : 0000 | |
498 Serial : 0000000000000000 | |
499 | |
500 ### meminfo: | |
501 | |
502 MemTotal: 2063052 kB | |
503 MemFree: 1935220 kB | |
504 MemAvailable: 1946772 kB | |
505 Buffers: 12924 kB | |
506 Cached: 60600 kB | |
507 SwapCached: 0 kB | |
508 Active: 41976 kB | |
509 Inactive: 42588 kB | |
510 Active(anon): 392 kB | |
511 Inactive(anon): 19208 kB | |
512 Active(file): 41584 kB | |
513 Inactive(file): 23380 kB | |
514 Unevictable: 0 kB | |
515 Mlocked: 0 kB | |
516 HighTotal: 1310720 kB | |
517 HighFree: 1239196 kB | |
518 LowTotal: 752332 kB | |
519 LowFree: 696024 kB | |
520 SwapTotal: 0 kB | |
521 SwapFree: 0 kB | |
522 Dirty: 0 kB | |
523 Writeback: 0 kB | |
524 AnonPages: 11052 kB | |
525 Mapped: 12456 kB | |
526 Shmem: 8564 kB | |
527 KReclaimable: 5436 kB | |
528 Slab: 21756 kB | |
529 SReclaimable: 5436 kB | |
530 SUnreclaim: 16320 kB | |
531 KernelStack: 1096 kB | |
532 PageTables: 780 kB | |
533 NFS_Unstable: 0 kB | |
534 Bounce: 0 kB | |
535 WritebackTmp: 0 kB | |
536 CommitLimit: 1031524 kB | |
537 Committed_AS: 37520 kB | |
538 VmallocTotal: 245760 kB | |
539 VmallocUsed: 3840 kB | |
540 VmallocChunk: 0 kB | |
541 Percpu: 392 kB | |
542 CmaTotal: 131072 kB | |
543 CmaFree: 125700 kB | |
544 | |
545 ### virtual memory: | |
546 | |
547 vm.admin_reserve_kbytes = 8192 | |
548 vm.block_dump = 0 | |
549 vm.compact_unevictable_allowed = 1 | |
550 vm.compaction_proactiveness = 20 | |
551 vm.dirty_background_bytes = 0 | |
552 vm.dirty_background_ratio = 1 | |
553 vm.dirty_bytes = 0 | |
554 vm.dirty_expire_centisecs = 12000 | |
555 vm.dirty_ratio = 20 | |
556 vm.dirty_writeback_centisecs = 12000 | |
557 vm.dirtytime_expire_seconds = 43200 | |
558 vm.extfrag_threshold = 500 | |
559 vm.highmem_is_dirtyable = 0 | |
560 vm.laptop_mode = 5 | |
561 vm.legacy_va_layout = 0 | |
562 vm.lowmem_reserve_ratio = 32 0 0 | |
563 vm.max_map_count = 65530 | |
564 vm.min_free_kbytes = 3441 | |
565 vm.mmap_min_addr = 4096 | |
566 vm.mmap_rnd_bits = 8 | |
567 vm.oom_dump_tasks = 1 | |
568 vm.oom_kill_allocating_task = 0 | |
569 vm.overcommit_kbytes = 0 | |
570 vm.overcommit_memory = 0 | |
571 vm.overcommit_ratio = 50 | |
572 vm.page-cluster = 3 | |
573 vm.page_lock_unfairness = 5 | |
574 vm.panic_on_oom = 0 | |
575 vm.percpu_pagelist_fraction = 0 | |
576 vm.stat_interval = 1 | |
577 vm.swappiness = 100 | |
578 vm.user_reserve_kbytes = 63937 | |
579 vm.vfs_cache_pressure = 50 | |
580 vm.watermark_boost_factor = 15000 | |
581 vm.watermark_scale_factor = 10 | |
582 | |
583 ### ip addr: | |
584 | |
585 default via XXX.XXX.0.1 dev eth0 proto dhcp src XXX.XXX.0.203 metric 100 | |
586 XXX.XXX.0.0/24 dev eth0 proto kernel scope link src XXX.XXX.0.203 | |
587 XXX.XXX.0.1 dev eth0 proto dhcp scope link src XXX.XXX.0.203 metric 100 | |
588 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 | |
589 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 | |
590 inet XXX.XXX.0.1/8 scope host lo | |
591 valid_lft forever preferred_lft forever | |
592 inet6 ::1/128 scope host | |
593 valid_lft forever preferred_lft forever | |
594 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1024 | |
595 link/ether 0e:a3:d6:0b:52:ab brd ff:ff:ff:ff:ff:ff | |
596 inet XXX.XXX.0.203/24 brd XXX.XXX.0.255 scope global dynamic eth0 | |
597 valid_lft 43196sec preferred_lft 43196sec | |
598 inet6 2001:470:1f05:79e::a9f/128 scope global dynamic noprefixroute | |
599 valid_lft 43198sec preferred_lft 43198sec | |
600 inet6 fd9f:300d:aab8::a9f/128 scope global dynamic noprefixroute | |
601 valid_lft 43198sec preferred_lft 43198sec | |
602 inet6 fd9f:300d:aab8:0:ca3:d6ff:fe0b:52ab/64 scope global mngtmpaddr noprefixroute | |
603 valid_lft forever preferred_lft forever | |
604 inet6 2001:470:1f05:79e:ca3:d6ff:fe0b:52ab/64 scope global mngtmpaddr noprefixroute | |
605 valid_lft forever preferred_lft forever | |
606 inet6 fe80::ca3:d6ff:fe0b:52ab/64 scope link | |
607 valid_lft forever preferred_lft forever | |
608 | |
609 ### partitions: | |
610 | |
611 major minor #blocks name | |
612 | |
613 179 0 3853312 mmcblk0 | |
614 179 1 3656544 mmcblk0p1 | |
615 8 0 976762584 sda | |
616 8 16 976762584 sdb | |
617 8 32 976762584 sdc | |
618 8 48 976762584 sdd | |
619 8 64 30641315 sde | |
620 8 65 2097152 sde1 | |
621 | |
622 ### df: | |
623 | |
624 udev 938M 0 938M 0% /dev | |
625 tmpfs 202M 3.1M 199M 2% /run | |
626 /dev/mmcblk0p1 3.5G 2.3G 1.1G 68% / | |
627 tmpfs 1008M 0 1008M 0% /dev/shm | |
628 tmpfs 5.0M 0 5.0M 0% /run/lock | |
629 tmpfs 1008M 0 1008M 0% /sys/fs/cgroup | |
630 tmpfs 1008M 4.0K 1008M 1% /tmp | |
631 /dev/sda 3.7T 2.3T 439G 85% /srv/dev-disk-by-id-ata-TOSHIBA_MQ01ABD100M_57L9PD0TT | |
632 /dev/sda 3.7T 2.3T 439G 85% /home | |
633 /dev/sda 3.7T 2.3T 439G 85% /var/lib/docker | |
634 folder2ram 1008M 5.4M 1003M 1% /var/log | |
635 folder2ram 1008M 0 1008M 0% /var/tmp | |
636 folder2ram 1008M 268K 1008M 1% /var/lib/openmediavault/rrd | |
637 folder2ram 1008M 636K 1007M 1% /var/spool | |
638 folder2ram 1008M 1.1M 1007M 1% /var/lib/rrdcached | |
639 | |
640 ### lsblk: | |
641 | |
642 NAME FSTYPE SIZE MOUNTPOINT UUID | |
643 sda btrfs 931.5G /srv/dev-disk-by-id-ata-TOSHIBA_MQ01ABD100M_57L9PD0TT bfa267c0-df2c-45a6-ad88-9d76b3844326 | |
644 sdb btrfs 931.5G bfa267c0-df2c-45a6-ad88-9d76b3844326 | |
645 sdc btrfs 931.5G bfa267c0-df2c-45a6-ad88-9d76b3844326 | |
646 sdd btrfs 931.5G bfa267c0-df2c-45a6-ad88-9d76b3844326 | |
647 sde 29.2G | |
648 └─sde1 swap 2G 0f7db4d8-522d-4eb3-bdde-c3dc6e8ab6c5 | |
649 mmcblk0 3.7G | |
650 └─mmcblk0p1 ext4 3.5G / 8596e2f4-0c13-469b-b2db-742b6a6fe7d4 | |
651 | |
652 ### zramctl: | |
653 | |
654 | |
655 | |
656 ### mtab: | |
657 | |
658 /dev/mmcblk0p1 / ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 | |
659 /dev/sda /home btrfs rw,relatime,space_cache,subvolid=261,subvol=/home 0 0 | |
660 /dev/sda /srv/dev-disk-by-id-ata-TOSHIBA_MQ01ABD100M_57L9PD0TT btrfs rw,relatime,space_cache,subvolid=5,subvol=/ 0 0 | |
661 /dev/sda /var/lib/docker btrfs rw,relatime,space_cache,subvolid=1094,subvol=/docker 0 0 | |
662 | |
663 ### mmc0:59b4 info: | |
664 | |
665 manfid: 0x00001b | |
666 cid: 1b534d3030303030105543548100e300 | |
667 fwrev: 0x0 | |
668 rca: 0x59b4 | |
669 csd: 400e00325b5900001d657f800a400000 | |
670 ocr: 0x00200000 | |
671 type: SD | |
672 date: 03/2014 | |
673 hwrev: 0x1 | |
674 dsr: 0x404 | |
675 serial: 0x55435481 | |
676 erase_size: 512 | |
677 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=00000 MODALIAS=mmc:block | |
678 ssr: 00000000020000000303900008110900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 | |
679 scr: 0235800100000000 | |
680 oemid: 0x534d | |
681 preferred_erase_size: 4194304 | |
682 name: 00000 | |
683 | |
684 ### Boot system health: | |
685 | |
686 Time CPU n/a load %cpu %sys %usr %nice %io %irq CPU C.St. | |
687 00:52:34: --- 1.20 65% 24% 14% 0% 26% 0% 59.9°C 0/0 | |
688 00:52:35: --- 1.20 72% 35% 28% 1% 6% 0% 59.4°C 0/0 | |
689 00:52:35: --- 1.20 100% 43% 55% 0% 0% 0% 59.4°C 0/0 | |
690 00:52:36: --- 1.20 100% 45% 43% 2% 9% 0% 59.4°C 0/0 | |
691 00:52:36: --- 1.20 100% 48% 43% 1% 5% 1% 58.9°C 0/0 | |
692 | |
693 Thu Jun 17 16:50:55 PDT 2021 | Helios4 | 21.05.2 | armhf | armv7l | 5.10.34-mvebu | |
694 | |
695 ### dmesg: | |
696 | |
697 [ 0.000000] Booting Linux on physical CPU 0x0 | |
698 [ 0.000000] Linux version 5.10.34-mvebu (root@hirsute) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) XXX.XXX.0.20190321) #21.05.1 SMP Thu May 6 20:42:08 UTC 2021 | |
699 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=50c5387d | |
700 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
701 [ 0.000000] OF: fdt: Machine model: Helios4 | |
702 [ 0.000000] Memory policy: Data cache writealloc | |
703 [ 0.000000] cma: Reserved 128 MiB at 0x78000000 | |
704 [ 0.000000] Zone ranges: | |
705 [ 0.000000] Normal [mem 0x0000000000000000-0x000000002fffffff] | |
706 [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] | |
707 [ 0.000000] Movable zone start for each node | |
708 [ 0.000000] Early memory node ranges | |
709 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] | |
710 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] | |
711 [ 0.000000] On node 0 totalpages: 524288 | |
712 [ 0.000000] Normal zone: 1728 pages used for memmap | |
713 [ 0.000000] Normal zone: 0 pages reserved | |
714 [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 | |
715 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:63 | |
716 [ 0.000000] percpu: Embedded 15 pages/cpu s31692 r8192 d21556 u61440 | |
717 [ 0.000000] pcpu-alloc: s31692 r8192 d21556 u61440 alloc=15*4096 | |
718 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 | |
719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 | |
720 [ 0.000000] Kernel command line: console=ttyS0,115200 root=UUID=8596e2f4-0c13-469b-b2db-742b6a6fe7d4 rootwait rootfstype=ext4 ubootdev=mmc scandelay loglevel=1 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u | |
721 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) | |
722 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
723 [ 0.000000] allocated 2097152 bytes of page_ext | |
724 [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off | |
725 [ 0.000000] Memory: 1919968K/2097152K available (8192K kernel code, 615K rwdata, 2392K rodata, 1024K init, 274K bss, 46112K reserved, 131072K cma-reserved, 1179648K highmem) | |
726 [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x17/0x294 with crng_init=0 | |
727 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
728 [ 0.000000] rcu: Hierarchical RCU implementation. | |
729 [ 0.000000] rcu: RCU event tracing is enabled. | |
730 [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. | |
731 [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
732 [ 0.000000] Rude variant of Tasks RCU enabled. | |
733 [ 0.000000] Tracing variant of Tasks RCU enabled. | |
734 [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
735 [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
736 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
737 [ 0.000000] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000 | |
738 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 | |
739 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 | |
740 [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines | |
741 [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled | |
742 [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB | |
743 [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001 | |
744 [ 0.000007] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns | |
745 [ 0.000016] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns | |
746 [ 0.000028] Switching to timer-based delay loop, resolution 1ns | |
747 [ 0.000179] Ignoring duplicate/late registration of read_current_timer delay | |
748 [ 0.000185] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns | |
749 [ 0.000385] Console: colour dummy device 80x30 | |
750 [ 0.000408] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=3200000) | |
751 [ 0.000416] pid_max: default: 32768 minimum: 301 | |
752 [ 0.000540] LSM: Security Framework initializing | |
753 [ 0.000584] Yama: becoming mindful. | |
754 [ 0.000659] AppArmor: AppArmor initialized | |
755 [ 0.000694] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) | |
756 [ 0.000699] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) | |
757 [ 0.001158] CPU: Testing write buffer coherency: ok | |
758 [ 0.001171] CPU0: Spectre v2: using BPIALL workaround | |
759 [ 0.001269] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
760 [ 0.001513] Setting up static identity map for 0x100000 - 0x100054 | |
761 [ 0.001596] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0xA | |
762 [ 0.001681] mvebu-pmsu: Initializing Power Management Service Unit | |
763 [ 0.001736] rcu: Hierarchical SRCU implementation. | |
764 [ 0.002333] smp: Bringing up secondary CPUs ... | |
765 [ 0.002483] Booting CPU 1 | |
766 [ 0.002651] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
767 [ 0.002655] CPU1: Spectre v2: using BPIALL workaround | |
768 [ 0.002709] smp: Brought up 1 node, 2 CPUs | |
769 [ 0.002713] SMP: Total of 2 processors activated (3200.00 BogoMIPS). | |
770 [ 0.002716] CPU: All CPU(s) started in SVC mode. | |
771 [ 0.003086] devtmpfs: initialized | |
772 [ 0.005370] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
773 [ 0.005464] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
774 [ 0.005479] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
775 [ 0.008162] pinctrl core: initialized pinctrl subsystem | |
776 [ 0.008592] NET: Registered protocol family 16 | |
777 [ 0.012682] DMA: preallocated 2048 KiB pool for atomic coherent allocations | |
778 [ 0.013031] audit: initializing netlink subsys (disabled) | |
779 [ 0.013135] audit: type=2000 audit(0.012:1): state=initialized audit_enabled=0 res=1 | |
780 [ 0.013328] thermal_sys: Registered thermal governor 'step_wise' | |
781 [ 0.013395] cpuidle: using governor ladder | |
782 [ 0.013501] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
783 [ 0.013504] hw-breakpoint: maximum watchpoint size is 4 bytes. | |
784 [ 0.013624] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling | |
785 [ 0.013630] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling | |
786 [ 0.024898] cryptd: max_cpu_qlen set to 1000 | |
787 [ 0.092071] raid6: neonx8 gen() 1645 MB/s | |
788 [ 0.160065] raid6: neonx8 xor() 1088 MB/s | |
789 [ 0.228064] raid6: neonx4 gen() 1957 MB/s | |
790 [ 0.296072] raid6: neonx4 xor() 1373 MB/s | |
791 [ 0.364069] raid6: neonx2 gen() 2466 MB/s | |
792 [ 0.432064] raid6: neonx2 xor() 1610 MB/s | |
793 [ 0.500073] raid6: neonx1 gen() 1917 MB/s | |
794 [ 0.568065] raid6: neonx1 xor() 1346 MB/s | |
795 [ 0.636093] raid6: int32x8 gen() 591 MB/s | |
796 [ 0.704079] raid6: int32x8 xor() 338 MB/s | |
797 [ 0.772097] raid6: int32x4 gen() 682 MB/s | |
798 [ 0.840071] raid6: int32x4 xor() 373 MB/s | |
799 [ 0.908070] raid6: int32x2 gen() 804 MB/s | |
800 [ 0.976066] raid6: int32x2 xor() 348 MB/s | |
801 [ 1.044071] raid6: int32x1 gen() 689 MB/s | |
802 [ 1.112076] raid6: int32x1 xor() 281 MB/s | |
803 [ 1.112079] raid6: using algorithm neonx2 gen() 2466 MB/s | |
804 [ 1.112082] raid6: .... xor() 1610 MB/s, rmw enabled | |
805 [ 1.112085] raid6: using neon recovery algorithm | |
806 [ 1.112433] 3P3V: supplied by power_brick_12V | |
807 [ 1.112592] 5V_HDD: supplied by power_brick_12V | |
808 [ 1.112812] vgaarb: loaded | |
809 [ 1.112961] SCSI subsystem initialized | |
810 [ 1.113036] libata version 3.00 loaded. | |
811 [ 1.113128] usbcore: registered new interface driver usbfs | |
812 [ 1.113146] usbcore: registered new interface driver hub | |
813 [ 1.113162] usbcore: registered new device driver usb | |
814 [ 1.113550] NetLabel: Initializing | |
815 [ 1.113554] NetLabel: domain hash size = 128 | |
816 [ 1.113556] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
817 [ 1.113590] NetLabel: unlabeled traffic allowed by default | |
818 [ 1.113761] clocksource: Switched to clocksource arm_global_timer | |
819 [ 1.113907] VFS: Disk quotas dquot_6.6.0 | |
820 [ 1.113942] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
821 [ 1.114171] AppArmor: AppArmor Filesystem Enabled | |
822 [ 1.116986] NET: Registered protocol family 2 | |
823 [ 1.117395] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) | |
824 [ 1.117431] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) | |
825 [ 1.117483] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
826 [ 1.117545] TCP: Hash tables configured (established 8192 bind 8192) | |
827 [ 1.117600] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) | |
828 [ 1.117622] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) | |
829 [ 1.117722] NET: Registered protocol family 1 | |
830 [ 1.118055] RPC: Registered named UNIX socket transport module. | |
831 [ 1.118059] RPC: Registered udp transport module. | |
832 [ 1.118061] RPC: Registered tcp transport module. | |
833 [ 1.118064] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
834 [ 1.118068] NET: Registered protocol family 44 | |
835 [ 1.118075] PCI: CLS 0 bytes, default 64 | |
836 [ 1.118174] Trying to unpack rootfs image as initramfs... | |
837 [ 1.447662] Freeing initrd memory: 10988K | |
838 [ 1.447936] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available | |
839 [ 1.448494] Initialise system trusted keyrings | |
840 [ 1.448517] Key type blacklist registered | |
841 [ 1.448634] workingset: timestamp_bits=14 max_order=19 bucket_order=5 | |
842 [ 1.450963] zbud: loaded | |
843 [ 1.451670] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
844 [ 1.452112] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). | |
845 [ 1.452471] fuse: init (API version 7.32) | |
846 [ 1.453013] integrity: Platform Keyring initialized | |
847 [ 1.511098] xor: measuring software checksum speed | |
848 [ 1.514865] arm4regs : 2620 MB/sec | |
849 [ 1.519765] 8regs : 2009 MB/sec | |
850 [ 1.524575] 32regs : 2046 MB/sec | |
851 [ 1.529760] neon : 1899 MB/sec | |
852 [ 1.529763] xor: using function: arm4regs (2620 MB/sec) | |
853 [ 1.529769] Key type asymmetric registered | |
854 [ 1.529772] Asymmetric key parser 'x509' registered | |
855 [ 1.529850] bounce: pool size: 64 pages | |
856 [ 1.529887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) | |
857 [ 1.529964] io scheduler mq-deadline registered | |
858 [ 1.529968] io scheduler kyber registered | |
859 [ 1.530084] io scheduler bfq registered | |
860 [ 1.531185] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver | |
861 [ 1.532579] mv_xor f1060800.xor: Marvell shared XOR driver | |
862 [ 1.558179] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) | |
863 [ 1.558300] mv_xor f1060900.xor: Marvell shared XOR driver | |
864 [ 1.586172] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) | |
865 [ 1.586448] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
866 [ 1.587150] printk: console [ttyS0] disabled | |
867 [ 1.607231] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 31, base_baud = 15625000) is a 16550A | |
868 [ 1.607334] printk: console [ttyS0] enabled | |
869 [ 1.610460] loop: module loaded | |
870 [ 1.611060] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy regulator | |
871 [ 1.611139] ahci-mvebu f10a8000.sata: supply phy not found, using dummy regulator | |
872 [ 1.611292] platform f10a8000.sata:sata-port@0: supply target not found, using dummy regulator | |
873 [ 1.611439] platform f10a8000.sata:sata-port@1: supply target not found, using dummy regulator | |
874 [ 1.611512] ahci-mvebu f10a8000.sata: masking port_map 0x3 -> 0x3 | |
875 [ 1.611541] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode | |
876 [ 1.611548] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs | |
877 [ 1.612154] scsi host0: ahci-mvebu | |
878 [ 1.612407] scsi host1: ahci-mvebu | |
879 [ 1.612506] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 51 | |
880 [ 1.612510] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 51 | |
881 [ 1.612602] ahci-mvebu f10e0000.sata: supply ahci not found, using dummy regulator | |
882 [ 1.612675] ahci-mvebu f10e0000.sata: supply phy not found, using dummy regulator | |
883 [ 1.612821] platform f10e0000.sata:sata-port@0: supply target not found, using dummy regulator | |
884 [ 1.612973] platform f10e0000.sata:sata-port@1: supply target not found, using dummy regulator | |
885 [ 1.613051] ahci-mvebu f10e0000.sata: masking port_map 0x3 -> 0x3 | |
886 [ 1.613077] ahci-mvebu f10e0000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode | |
887 [ 1.613084] ahci-mvebu f10e0000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs | |
888 [ 1.613696] scsi host2: ahci-mvebu | |
889 [ 1.613933] scsi host3: ahci-mvebu | |
890 [ 1.614038] ata3: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x100 irq 52 | |
891 [ 1.614043] ata4: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x180 irq 52 | |
892 [ 1.614730] libphy: Fixed MDIO Bus: probed | |
893 [ 1.615160] libphy: orion_mdio_bus: probed | |
894 [ 1.622453] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled | |
895 [ 1.625214] mvneta f1070000.ethernet eth0: Using device tree mac address 0e:a3:d6:0b:52:ab | |
896 [ 1.625484] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
897 [ 1.625505] ehci-pci: EHCI PCI platform driver | |
898 [ 1.625535] ehci-platform: EHCI generic platform driver | |
899 [ 1.625616] ehci-orion: EHCI orion driver | |
900 [ 1.625723] orion-ehci f1058000.usb: EHCI Host Controller | |
901 [ 1.625736] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 | |
902 [ 1.625931] orion-ehci f1058000.usb: irq 47, io mem 0xf1058000 | |
903 [ 1.645767] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 | |
904 [ 1.645870] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
905 [ 1.645875] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
906 [ 1.645879] usb usb1: Product: EHCI Host Controller | |
907 [ 1.645882] usb usb1: Manufacturer: Linux 5.10.34-mvebu ehci_hcd | |
908 [ 1.645886] usb usb1: SerialNumber: f1058000.usb | |
909 [ 1.646150] hub 1-0:1.0: USB hub found | |
910 [ 1.646167] hub 1-0:1.0: 1 port detected | |
911 [ 1.646373] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
912 [ 1.646381] ohci-pci: OHCI PCI platform driver | |
913 [ 1.646403] ohci-platform: OHCI generic platform driver | |
914 [ 1.646732] xhci-hcd f10f0000.usb3: xHCI Host Controller | |
915 [ 1.646742] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2 | |
916 [ 1.646942] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 | |
917 [ 1.646966] xhci-hcd f10f0000.usb3: irq 54, io mem 0xf10f0000 | |
918 [ 1.647105] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
919 [ 1.647110] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
920 [ 1.647113] usb usb2: Product: xHCI Host Controller | |
921 [ 1.647116] usb usb2: Manufacturer: Linux 5.10.34-mvebu xhci-hcd | |
922 [ 1.647120] usb usb2: SerialNumber: f10f0000.usb3 | |
923 [ 1.647333] hub 2-0:1.0: USB hub found | |
924 [ 1.647350] hub 2-0:1.0: 1 port detected | |
925 [ 1.647497] xhci-hcd f10f0000.usb3: xHCI Host Controller | |
926 [ 1.647505] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3 | |
927 [ 1.647518] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed | |
928 [ 1.647549] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. | |
929 [ 1.647603] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 | |
930 [ 1.647608] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
931 [ 1.647611] usb usb3: Product: xHCI Host Controller | |
932 [ 1.647614] usb usb3: Manufacturer: Linux 5.10.34-mvebu xhci-hcd | |
933 [ 1.647617] usb usb3: SerialNumber: f10f0000.usb3 | |
934 [ 1.647808] hub 3-0:1.0: USB hub found | |
935 [ 1.647822] hub 3-0:1.0: 1 port detected | |
936 [ 1.648068] xhci-hcd f10f8000.usb3: xHCI Host Controller | |
937 [ 1.648078] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4 | |
938 [ 1.648268] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 | |
939 [ 1.648291] xhci-hcd f10f8000.usb3: irq 55, io mem 0xf10f8000 | |
940 [ 1.648429] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
941 [ 1.648434] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
942 [ 1.648437] usb usb4: Product: xHCI Host Controller | |
943 [ 1.648441] usb usb4: Manufacturer: Linux 5.10.34-mvebu xhci-hcd | |
944 [ 1.648444] usb usb4: SerialNumber: f10f8000.usb3 | |
945 [ 1.648640] hub 4-0:1.0: USB hub found | |
946 [ 1.648655] hub 4-0:1.0: 1 port detected | |
947 [ 1.648788] xhci-hcd f10f8000.usb3: xHCI Host Controller | |
948 [ 1.648795] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5 | |
949 [ 1.648807] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed | |
950 [ 1.648837] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. | |
951 [ 1.648887] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 | |
952 [ 1.648891] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
953 [ 1.648894] usb usb5: Product: xHCI Host Controller | |
954 [ 1.648898] usb usb5: Manufacturer: Linux 5.10.34-mvebu xhci-hcd | |
955 [ 1.648901] usb usb5: SerialNumber: f10f8000.usb3 | |
956 [ 1.649079] hub 5-0:1.0: USB hub found | |
957 [ 1.649094] hub 5-0:1.0: 1 port detected | |
958 [ 1.649357] usbcore: registered new interface driver usb-storage | |
959 [ 1.649544] mousedev: PS/2 mouse device common for all mice | |
960 [ 1.650162] armada38x-rtc f10a3800.rtc: registered as rtc0 | |
961 [ 1.650239] armada38x-rtc f10a3800.rtc: setting system clock to 2021-06-17T23:50:40 UTC (1623973840) | |
962 [ 1.650358] i2c /dev entries driver | |
963 [ 1.650870] pca953x 0-0020: supply vcc not found, using dummy regulator | |
964 [ 1.650938] pca953x 0-0020: using no AI | |
965 [ 1.651614] gpio-496 (board-rev-0): hogged as input | |
966 [ 1.651703] gpio-497 (board-rev-1): hogged as input | |
967 [ 1.651790] gpio-501 (usb-overcurrent-status): hogged as input | |
968 [ 1.654017] sdhci: Secure Digital Host Controller Interface driver | |
969 [ 1.654022] sdhci: Copyright(c) Pierre Ossman | |
970 [ 1.654147] sdhci-pltfm: SDHCI platform and OF driver helper | |
971 [ 1.654242] sdhci-pxav3 f10d8000.sdhci: Got CD GPIO | |
972 [ 1.654825] ledtrig-cpu: registered to indicate activity on CPUs | |
973 [ 1.654852] hid: raw HID events driver (C) Jiri Kosina | |
974 [ 1.654920] usbcore: registered new interface driver usbhid | |
975 [ 1.654923] usbhid: USB HID core driver | |
976 [ 1.655130] Initializing XFRM netlink socket | |
977 [ 1.655356] NET: Registered protocol family 10 | |
978 [ 1.676434] Segment Routing with IPv6 | |
979 [ 1.676494] NET: Registered protocol family 17 | |
980 [ 1.676659] ThumbEE CPU extension supported. | |
981 [ 1.676667] Registering SWP/SWPB emulation handler | |
982 [ 1.676794] registered taskstats version 1 | |
983 [ 1.676800] Loading compiled-in X.509 certificates | |
984 [ 1.680970] Loaded X.509 cert 'Build time autogenerated kernel key: 4bcc027928e39a8ca84c86fd18e21f81b5ff8b83' | |
985 [ 1.682095] zswap: loaded using pool zstd/z3fold | |
986 [ 1.682413] Key type ._fscrypt registered | |
987 [ 1.682417] Key type .fscrypt registered | |
988 [ 1.682421] Key type fscrypt-provisioning registered | |
989 [ 1.684126] Btrfs loaded, crc32c=crc32c-generic | |
990 [ 1.685986] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA | |
991 [ 1.694983] Key type encrypted registered | |
992 [ 1.694992] AppArmor: AppArmor sha1 policy hashing enabled | |
993 [ 1.696501] USB-PWR: supplied by power_brick_12V | |
994 [ 1.696868] input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
995 [ 1.718657] mmc0: new high speed SDHC card at address 59b4 | |
996 [ 1.718964] mmcblk0: mmc0:59b4 00000 3.67 GiB | |
997 [ 1.719968] mmcblk0: p1 | |
998 [ 1.877780] usb 5-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd | |
999 [ 1.898326] usb 5-1: New USB device found, idVendor=0781, idProduct=5580, bcdDevice= 0.10 | |
1000 [ 1.898330] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
1001 [ 1.898334] usb 5-1: Product: Extreme | |
1002 [ 1.898337] usb 5-1: Manufacturer: SanDisk | |
1003 [ 1.898340] usb 5-1: SerialNumber: AA011008150457010124 | |
1004 [ 1.898842] usb-storage 5-1:1.0: USB Mass Storage device detected | |
1005 [ 1.899043] scsi host4: usb-storage 5-1:1.0 | |
1006 [ 2.089766] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
1007 [ 2.089770] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
1008 [ 2.089786] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
1009 [ 2.089789] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) | |
1010 [ 2.090232] ata3.00: ATA-9: WDC WD10JPVX-60JC3T0, 01.01A01, max UDMA/133 | |
1011 [ 2.090237] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32) | |
1012 [ 2.090279] ata1.00: ATA-9: WDC WD10JPVX-75JC3T0, 01.01A01, max UDMA/133 | |
1013 [ 2.090282] ata4.00: ATA-9: WDC WD10JPVX-75JC3T0, 02.01A02, max UDMA/133 | |
1014 [ 2.090286] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32) | |
1015 [ 2.090291] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32) | |
1016 [ 2.090709] ata3.00: configured for UDMA/133 | |
1017 [ 2.090812] ata1.00: configured for UDMA/133 | |
1018 [ 2.090815] ata4.00: configured for UDMA/133 | |
1019 [ 2.091017] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-75J 1A01 PQ: 0 ANSI: 5 | |
1020 [ 2.091307] sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
1021 [ 2.091372] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) | |
1022 [ 2.091377] sd 0:0:0:0: [sda] 4096-byte physical blocks | |
1023 [ 2.091399] sd 0:0:0:0: [sda] Write Protect is off | |
1024 [ 2.091404] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
1025 [ 2.091436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
1026 [ 2.406389] ata2.00: ATA-8: TOSHIBA MQ01ABD100M, AX101U, max UDMA/100 | |
1027 [ 2.406395] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32) | |
1028 [ 2.407713] ata2.00: configured for UDMA/100 | |
1029 [ 2.407886] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 1U PQ: 0 ANSI: 5 | |
1030 [ 2.408156] sd 1:0:0:0: Attached scsi generic sg1 type 0 | |
1031 [ 2.408214] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) | |
1032 [ 2.408220] sd 1:0:0:0: [sdb] 4096-byte physical blocks | |
1033 [ 2.408243] sd 1:0:0:0: [sdb] Write Protect is off | |
1034 [ 2.408248] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 | |
1035 [ 2.408280] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
1036 [ 2.408365] scsi 2:0:0:0: Direct-Access ATA WDC WD10JPVX-60J 1A01 PQ: 0 ANSI: 5 | |
1037 [ 2.408645] sd 2:0:0:0: Attached scsi generic sg2 type 0 | |
1038 [ 2.408710] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) | |
1039 [ 2.408715] sd 2:0:0:0: [sdc] 4096-byte physical blocks | |
1040 [ 2.408739] sd 2:0:0:0: [sdc] Write Protect is off | |
1041 [ 2.408744] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 | |
1042 [ 2.408778] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
1043 [ 2.408852] scsi 3:0:0:0: Direct-Access ATA WDC WD10JPVX-75J 1A02 PQ: 0 ANSI: 5 | |
1044 [ 2.409177] sd 3:0:0:0: Attached scsi generic sg3 type 0 | |
1045 [ 2.409283] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) | |
1046 [ 2.409288] sd 3:0:0:0: [sdd] 4096-byte physical blocks | |
1047 [ 2.409312] sd 3:0:0:0: [sdd] Write Protect is off | |
1048 [ 2.409317] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 | |
1049 [ 2.409349] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
1050 [ 2.497472] sd 1:0:0:0: [sdb] Attached SCSI removable disk | |
1051 [ 2.515027] sd 0:0:0:0: [sda] Attached SCSI removable disk | |
1052 [ 2.764252] sd 3:0:0:0: [sdd] Attached SCSI removable disk | |
1053 [ 2.770564] sd 2:0:0:0: [sdc] Attached SCSI removable disk | |
1054 [ 2.771075] Freeing unused kernel memory: 1024K | |
1055 [ 2.785902] Run /init as init process | |
1056 [ 2.785907] with arguments: | |
1057 [ 2.785909] /init | |
1058 [ 2.785912] scandelay | |
1059 [ 2.785914] with environment: | |
1060 [ 2.785917] HOME=/ | |
1061 [ 2.785919] TERM=linux | |
1062 [ 2.785921] ubootdev=mmc | |
1063 [ 2.786082] process '/usr/bin/sh' started with executable stack | |
1064 [ 2.910191] scsi 4:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6 | |
1065 [ 2.910481] sd 4:0:0:0: Attached scsi generic sg4 type 0 | |
1066 [ 2.910656] sd 4:0:0:0: [sde] 61282631 512-byte logical blocks: (31.4 GB/29.2 GiB) | |
1067 [ 2.910885] sd 4:0:0:0: [sde] Write Protect is off | |
1068 [ 2.910891] sd 4:0:0:0: [sde] Mode Sense: 53 00 00 08 | |
1069 [ 2.911082] sd 4:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA | |
1070 [ 2.938447] sde: sde1 | |
1071 [ 2.939442] sd 4:0:0:0: [sde] Attached SCSI removable disk | |
1072 [ 2.963038] random: fast init done | |
1073 [ 3.153494] usbcore: registered new interface driver uas | |
1074 [ 3.463736] async_tx: api initialized (async) | |
1075 [ 3.838698] random: crng init done | |
1076 [ 3.873852] BTRFS: device fsid bfa267c0-df2c-45a6-ad88-9d76b3844326 devid 4 transid 457792 /dev/sdd scanned by btrfs (225) | |
1077 [ 3.874024] BTRFS: device fsid bfa267c0-df2c-45a6-ad88-9d76b3844326 devid 3 transid 457792 /dev/sdc scanned by btrfs (225) | |
1078 [ 3.874193] BTRFS: device fsid bfa267c0-df2c-45a6-ad88-9d76b3844326 devid 2 transid 457792 /dev/sdb scanned by btrfs (225) | |
1079 [ 3.874344] BTRFS: device fsid bfa267c0-df2c-45a6-ad88-9d76b3844326 devid 1 transid 457792 /dev/sda scanned by btrfs (225) | |
1080 [ 5.310272] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) | |
1081 [ 6.148931] systemd[1]: Inserted module 'autofs4' | |
1082 [ 6.207725] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) | |
1083 [ 6.207960] systemd[1]: Detected architecture arm. | |
1084 [ 6.250548] systemd[1]: Set hostname to <TrapNAS>. | |
1085 [ 7.281275] systemd[1]: /lib/systemd/system/systemd-udevd.service:21: Unknown lvalue 'ProtectClock' in section 'Service', ignoring | |
1086 [ 7.281296] systemd[1]: /lib/systemd/system/systemd-udevd.service:22: Unknown lvalue 'ProtectHostname' in section 'Service', ignoring | |
1087 [ 7.281343] systemd[1]: /lib/systemd/system/systemd-udevd.service:26: Unknown lvalue 'RestrictSUIDSGID' in section 'Service', ignoring | |
1088 [ 7.289128] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly. | |
1089 [ 7.304537] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly. | |
1090 [ 7.357351] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly. | |
1091 [ 7.471506] systemd[1]: Listening on Syslog Socket. | |
1092 [ 7.637948] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro | |
1093 [ 8.007723] marvell-cesa f1090000.crypto: CESA device successfully registered | |
1094 [ 8.037156] lm75 0-004c: supply vs not found, using dummy regulator | |
1095 [ 8.037538] lm75 0-004c: hwmon2: sensor 'lm75' | |
1096 [ 8.938671] mvneta f1070000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] (irq=POLL) | |
1097 [ 8.938938] mvneta f1070000.ethernet eth0: configuring for phy/rgmii-id link mode | |
1098 [ 9.006052] orion_wdt: Initial timeout 171 sec | |
1099 [ 9.015566] at24 0-0053: supply vcc not found, using dummy regulator | |
1100 [ 9.021656] at24 0-0053: 256 byte 24c02 EEPROM, writable, 16 bytes/write | |
1101 [ 9.693925] Adding 2097148k swap on /dev/sde1. Priority:-2 extents:1 across:2097148k FS | |
1102 [ 10.231934] BTRFS info (device sda): disk space caching is enabled | |
1103 [ 10.231940] BTRFS info (device sda): has skinny extents | |
1104 [ 13.022320] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
1105 [ 13.022340] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
1106 [ 15.022374] systemd[1]: Mounted /srv/dev-disk-by-id-ata-TOSHIBA_MQ01ABD100M_57L9PD0TT. | |
1107 [ 15.214829] systemd[1]: Mounted /var/lib/docker. | |
1108 [ 15.230286] systemd[1]: Mounted /home. | |
1109 [ 15.246239] systemd[1]: Reached target Local File Systems. | |
1110 [ 15.264518] systemd[1]: Starting Armbian ZRAM config... | |
1111 [ 15.282838] systemd[1]: Starting Cleanup monit state file... | |
1112 [ 15.297874] systemd[1]: Condition check resulted in Set console font and keymap being skipped. | |
1113 [ 15.300577] systemd[1]: Starting Preprocess NFS configuration... | |
1114 [ 15.313969] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. | |
1115 [ 15.316697] systemd[1]: Starting folder2ram systemd service... | |
1116 [ 15.924531] systemd-journald[774]: Received request to flush runtime journal from PID 1 | |
1117 | |
1118 ### armbian-release: | |
1119 | |
1120 # PLEASE DO NOT EDIT THIS FILE | |
1121 BOARD=helios4 | |
1122 BOARD_NAME="Helios4" | |
1123 BOARDFAMILY=mvebu | |
1124 BUILD_REPOSITORY_URL=git@github.com:armbian/build.git | |
1125 BUILD_REPOSITORY_COMMIT=4cc754e0b-dirty | |
1126 DISTRIBUTION_CODENAME=buster | |
1127 DISTRIBUTION_STATUS=supported | |
1128 VERSION=21.05.2 | |
1129 LINUXFAMILY=mvebu | |
1130 ARCH=arm | |
1131 IMAGE_TYPE=stable | |
1132 BOARD_TYPE=conf | |
1133 INITRD_ARCH=arm | |
1134 KERNEL_IMAGE_TYPE=Image | |
1135 BRANCH=current | |
1136 | |
1137 ### boot environment: | |
1138 | |
1139 verbosity=1 | |
1140 eth1addr=0E:A3:D6:0B:52:AB | |
1141 spi_workaround=off | |
1142 overlay_prefix=armada-388-helios4 | |
1143 rootdev=UUID=8596e2f4-0c13-469b-b2db-742b6a6fe7d4 | |
1144 rootfstype=ext4 | |
1145 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u | |
1146 | |
1147 ### lsusb: | |
1148 | |
1149 | |
1150 ### lscpu: | |
1151 | |
1152 Architecture: armv7l | |
1153 Byte Order: Little Endian | |
1154 CPU(s): 2 | |
1155 On-line CPU(s) list: 0,1 | |
1156 Thread(s) per core: 1 | |
1157 Core(s) per socket: 2 | |
1158 Socket(s): 1 | |
1159 Vendor ID: ARM | |
1160 Model: 1 | |
1161 Model name: Cortex-A9 | |
1162 Stepping: r4p1 | |
1163 BogoMIPS: 1600.00 | |
1164 Flags: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 | |
1165 | |
1166 ### cpuinfo: | |
1167 | |
1168 processor : 0 | |
1169 model name : ARMv7 Processor rev 1 (v7l) | |
1170 BogoMIPS : 1600.00 | |
1171 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 | |
1172 CPU implementer : 0x41 | |
1173 CPU architecture: 7 | |
1174 CPU variant : 0x4 | |
1175 CPU part : 0xc09 | |
1176 CPU revision : 1 | |
1177 | |
1178 processor : 1 | |
1179 model name : ARMv7 Processor rev 1 (v7l) | |
1180 BogoMIPS : 1600.00 | |
1181 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 | |
1182 CPU implementer : 0x41 | |
1183 CPU architecture: 7 | |
1184 CPU variant : 0x4 | |
1185 CPU part : 0xc09 | |
1186 CPU revision : 1 | |
1187 | |
1188 Hardware : Marvell Armada 380/385 (Device Tree) | |
1189 Revision : 0000 | |
1190 Serial : 0000000000000000 | |
1191 | |
1192 ### meminfo: | |
1193 | |
1194 MemTotal: 2063052 kB | |
1195 MemFree: 1932936 kB | |
1196 MemAvailable: 1944392 kB | |
1197 Buffers: 12936 kB | |
1198 Cached: 60792 kB | |
1199 SwapCached: 0 kB | |
1200 Active: 42180 kB | |
1201 Inactive: 42832 kB | |
1202 Active(anon): 440 kB | |
1203 Inactive(anon): 19756 kB | |
1204 Active(file): 41740 kB | |
1205 Inactive(file): 23076 kB | |
1206 Unevictable: 0 kB | |
1207 Mlocked: 0 kB | |
1208 HighTotal: 1310720 kB | |
1209 HighFree: 1238388 kB | |
1210 LowTotal: 752332 kB | |
1211 LowFree: 694548 kB | |
1212 SwapTotal: 2097148 kB | |
1213 SwapFree: 2097148 kB | |
1214 Dirty: 84 kB | |
1215 Writeback: 0 kB | |
1216 AnonPages: 11240 kB | |
1217 Mapped: 11880 kB | |
1218 Shmem: 8888 kB | |
1219 KReclaimable: 5544 kB | |
1220 Slab: 22156 kB | |
1221 SReclaimable: 5544 kB | |
1222 SUnreclaim: 16612 kB | |
1223 KernelStack: 1080 kB | |
1224 PageTables: 652 kB | |
1225 NFS_Unstable: 0 kB | |
1226 Bounce: 0 kB | |
1227 WritebackTmp: 0 kB | |
1228 CommitLimit: 3128672 kB | |
1229 Committed_AS: 29720 kB | |
1230 VmallocTotal: 245760 kB | |
1231 VmallocUsed: 4356 kB | |
1232 VmallocChunk: 0 kB | |
1233 Percpu: 392 kB | |
1234 CmaTotal: 131072 kB | |
1235 CmaFree: 125700 kB | |
1236 | |
1237 ### virtual memory: | |
1238 | |
1239 vm.admin_reserve_kbytes = 8192 | |
1240 vm.block_dump = 0 | |
1241 vm.compact_unevictable_allowed = 1 | |
1242 vm.compaction_proactiveness = 20 | |
1243 vm.dirty_background_bytes = 0 | |
1244 vm.dirty_background_ratio = 1 | |
1245 vm.dirty_bytes = 0 | |
1246 vm.dirty_expire_centisecs = 12000 | |
1247 vm.dirty_ratio = 20 | |
1248 vm.dirty_writeback_centisecs = 12000 | |
1249 vm.dirtytime_expire_seconds = 43200 | |
1250 vm.extfrag_threshold = 500 | |
1251 vm.highmem_is_dirtyable = 0 | |
1252 vm.laptop_mode = 5 | |
1253 vm.legacy_va_layout = 0 | |
1254 vm.lowmem_reserve_ratio = 32 0 0 | |
1255 vm.max_map_count = 65530 | |
1256 vm.min_free_kbytes = 3441 | |
1257 vm.mmap_min_addr = 4096 | |
1258 vm.mmap_rnd_bits = 8 | |
1259 vm.oom_dump_tasks = 1 | |
1260 vm.oom_kill_allocating_task = 0 | |
1261 vm.overcommit_kbytes = 0 | |
1262 vm.overcommit_memory = 0 | |
1263 vm.overcommit_ratio = 50 | |
1264 vm.page-cluster = 3 | |
1265 vm.page_lock_unfairness = 5 | |
1266 vm.panic_on_oom = 0 | |
1267 vm.percpu_pagelist_fraction = 0 | |
1268 vm.stat_interval = 1 | |
1269 vm.swappiness = 100 | |
1270 vm.user_reserve_kbytes = 63937 | |
1271 vm.vfs_cache_pressure = 50 | |
1272 vm.watermark_boost_factor = 15000 | |
1273 vm.watermark_scale_factor = 10 | |
1274 | |
1275 ### ip addr: | |
1276 | |
1277 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 | |
1278 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 | |
1279 inet XXX.XXX.0.1/8 scope host lo | |
1280 valid_lft forever preferred_lft forever | |
1281 inet6 ::1/128 scope host | |
1282 valid_lft forever preferred_lft forever | |
1283 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1024 | |
1284 link/ether 0e:a3:d6:0b:52:ab brd ff:ff:ff:ff:ff:ff | |
1285 inet6 fe80::ca3:d6ff:fe0b:52ab/64 scope link | |
1286 valid_lft forever preferred_lft forever | |
1287 | |
1288 ### partitions: | |
1289 | |
1290 major minor #blocks name | |
1291 | |
1292 179 0 3853312 mmcblk0 | |
1293 179 1 3656544 mmcblk0p1 | |
1294 8 0 976762584 sda | |
1295 8 16 976762584 sdb | |
1296 8 32 976762584 sdc | |
1297 8 48 976762584 sdd | |
1298 8 64 30641315 sde | |
1299 8 65 2097152 sde1 | |
1300 | |
1301 ### df: | |
1302 | |
1303 udev 938M 0 938M 0% /dev | |
1304 tmpfs 202M 3.2M 199M 2% /run | |
1305 /dev/mmcblk0p1 3.5G 2.3G 1.2G 66% / | |
1306 tmpfs 1008M 0 1008M 0% /dev/shm | |
1307 tmpfs 5.0M 0 5.0M 0% /run/lock | |
1308 tmpfs 1008M 0 1008M 0% /sys/fs/cgroup | |
1309 tmpfs 1008M 4.0K 1008M 1% /tmp | |
1310 /dev/sda 3.7T 2.4T 435G 85% /srv/dev-disk-by-id-ata-TOSHIBA_MQ01ABD100M_57L9PD0TT | |
1311 /dev/sda 3.7T 2.4T 435G 85% /var/lib/docker | |
1312 /dev/sda 3.7T 2.4T 435G 85% /home | |
1313 folder2ram 1008M 5.7M 1002M 1% /var/log | |
1314 folder2ram 1008M 0 1008M 0% /var/tmp | |
1315 folder2ram 1008M 268K 1008M 1% /var/lib/openmediavault/rrd | |
1316 folder2ram 1008M 636K 1007M 1% /var/spool | |
1317 folder2ram 1008M 1.6M 1006M 1% /var/lib/rrdcached | |
1318 | |
1319 ### lsblk: | |
1320 | |
1321 NAME FSTYPE SIZE MOUNTPOINT UUID | |
1322 sda btrfs 931.5G /srv/dev-disk-by-id-ata-TOSHIBA_MQ01ABD100M_57L9PD0TT bfa267c0-df2c-45a6-ad88-9d76b3844326 | |
1323 sdb btrfs 931.5G bfa267c0-df2c-45a6-ad88-9d76b3844326 | |
1324 sdc btrfs 931.5G bfa267c0-df2c-45a6-ad88-9d76b3844326 | |
1325 sdd btrfs 931.5G bfa267c0-df2c-45a6-ad88-9d76b3844326 | |
1326 sde 29.2G | |
1327 mmcblk0 3.7G | |
1328 └─mmcblk0p1 ext4 3.5G / 8596e2f4-0c13-469b-b2db-742b6a6fe7d4 | |
1329 | |
1330 ### zramctl: | |
1331 | |
1332 | |
1333 | |
1334 ### mtab: | |
1335 | |
1336 /dev/mmcblk0p1 / ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 | |
1337 /dev/sda /home btrfs rw,relatime,space_cache,subvolid=261,subvol=/home 0 0 | |
1338 /dev/sda /srv/dev-disk-by-id-ata-TOSHIBA_MQ01ABD100M_57L9PD0TT btrfs rw,relatime,space_cache,subvolid=5,subvol=/ 0 0 | |
1339 /dev/sda /var/lib/docker btrfs rw,relatime,space_cache,subvolid=1094,subvol=/docker 0 0 | |
1340 | |
1341 ### mmc0:59b4 info: | |
1342 | |
1343 manfid: 0x00001b | |
1344 cid: 1b534d3030303030105543548100e300 | |
1345 fwrev: 0x0 | |
1346 rca: 0x59b4 | |
1347 csd: 400e00325b5900001d657f800a400000 | |
1348 ocr: 0x00200000 | |
1349 type: SD | |
1350 date: 03/2014 | |
1351 hwrev: 0x1 | |
1352 dsr: 0x404 | |
1353 serial: 0x55435481 | |
1354 erase_size: 512 | |
1355 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=00000 MODALIAS=mmc:block | |
1356 ssr: 00000000020000000303900008110900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 | |
1357 scr: 0235800100000000 | |
1358 oemid: 0x534d | |
1359 preferred_erase_size: 4194304 | |
1360 name: 00000 | |
1361 | |
1362 ### Boot system health: | |
1363 | |
1364 Time CPU n/a load %cpu %sys %usr %nice %io %irq CPU C.St. | |
1365 16:50:57: --- 0.67 64% 21% 12% 0% 30% 0% 59.9°C 0/0 | |
1366 16:50:57: --- 0.67 65% 43% 17% 2% 2% 0% 58.5°C 0/0 | |
1367 16:50:58: --- 0.67 100% 47% 50% 1% 0% 1% 60.4°C 0/0 | |
1368 16:50:58: --- 0.67 100% 53% 31% 2% 11% 1% 60.4°C 0/0 | |
1369 16:50:59: --- 1.74 100% 61% 34% 1% 3% 0% 60.4°C 0/0 | |
1370 | |
1371 ### lspci: | |
1372 | |
1373 | |
1374 ### Installed packages: | |
1375 | |
1376 ii armbian-bsp-cli-helios4 21.05.4 armhf Tweaks for Armbian buster on helios4 | |
1377 ii armbian-config 21.05.4 all Armbian configuration utility | |
1378 ii armbian-firmware 21.05.4 all Linux firmware | |
1379 rc armbian-zsh 21.02.2 all Armbian improved ZShell | |
1380 rc hostapd 3:2.9-102~armbian20.05.2+1 armhf IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator | |
1381 ii linux-base 4.6 all Linux image base package | |
1382 ii linux-dtb-current-mvebu 21.05.1 armhf Linux DTB, version 5.10.34-mvebu | |
1383 ii linux-image-current-mvebu 21.05.1 armhf Linux kernel, version 5.10.34-mvebu | |
1384 ii linux-libc-dev:armhf 21.05.4 armhf Armbian Linux support headers for userspace development | |
1385 ii linux-u-boot-helios4-current 21.05.1 armhf Uboot loader 2019.04 | |
1386 ii openmediavault 5.6.10-1 all openmediavault - The open network attached storage solution | |
1387 ii openmediavault-flashmemory 5.0.8 all folder2ram plugin for OpenMediaVault | |
1388 ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive | |
1389 | |
1390 ### Loaded modules: | |
1391 | |
1392 Module Size Used by | |
1393 softdog 16384 0 | |
1394 veth 24576 0 | |
1395 xt_nat 16384 9 | |
1396 xt_tcpudp 20480 27 | |
1397 xt_conntrack 16384 1 | |
1398 xt_MASQUERADE 20480 10 | |
1399 nf_conntrack_netlink 36/usr/bin/armbianmonitor: line 886: iostat: command not found | |
864 0 | |
1400 nft_counter 16384 42 | |
1401 xt_addrtype 16384 2 | |
1402 nft_compat 16384 49 | |
1403 nft_chain_nat 16384 4 | |
1404 nf_nat 32768 3 xt_nat,xt_MASQUERADE,nft_chain_nat | |
1405 nf_conntrack 102400 5 xt_nat,xt_MASQUERADE,nf_conntrack_netlink,xt_conntrack,nf_nat | |
1406 nf_defrag_ipv6 20480 1 nf_conntrack | |
1407 nf_defrag_ipv4 16384 1 nf_conntrack | |
1408 nf_tables 131072 216 nft_compat,nft_chain_nat,nft_counter | |
1409 nfnetlink 16384 4 nft_compat,nf_conntrack_netlink,nf_tables | |
1410 br_netfilter 28672 0 | |
1411 bridge 143360 1 br_netfilter | |
1412 stp 16384 1 bridge | |
1413 llc 16384 2 bridge,stp | |
1414 aufs 163840 0 | |
1415 overlay 86016 8 | |
1416 at24 24576 0 | |
1417 orion_wdt 16384 1 | |
1418 pwm_fan 16384 0 | |
1419 lm75 24576 0 | |
1420 marvell_cesa 28672 0 | |
1421 libdes 24576 1 marvell_cesa | |
1422 ip_tables 24576 0 | |
1423 x_tables 24576 7 xt_nat,ip_tables,nft_compat,xt_tcpudp,xt_MASQUERADE,xt_addrtype,xt_conntrack | |
1424 autofs4 36864 2 | |
1425 raid10 49152 0 | |
1426 raid456 122880 0 | |
1427 async_raid6_recov 20480 1 raid456 | |
1428 async_memcpy 20480 2 raid456,async_raid6_recov | |
1429 async_pq 20480 2 raid456,async_raid6_recov | |
1430 async_xor 20480 3 async_pq,raid456,async_raid6_recov | |
1431 async_tx 20480 5 async_xor,async_pq,raid456,async_memcpy,async_raid6_recov | |
1432 raid1 40960 0 | |
1433 raid0 24576 0 | |
1434 multipath 20480 0 | |
1435 linear 16384 0 | |
1436 md_mod 110592 6 raid1,raid10,multipath,linear,raid0,raid456 | |
1437 uas 24576 0 | |
1438 | |
1439 ### Current system health: | |
1440 | |
1441 Time CPU n/a load %cpu %sys %usr %nice %io %irq CPU C.St. | |
1442 17:06:24: --- 0.39 27% 2% 11% 0% 13% 0% 58.0°C 0/0 | |
1443 17:06:25: --- 0.39 15% 5% 7% 2% 0% 0% 55.6°C 0/0 | |
1444 17:06:25: --- 0.39 12% 5% 4% 2% 0% 0% 54.6°C 0/0 | |
1445 17:06:25: --- 0.39 18% 7% 8% 2% 0% 0% 57.5°C 0/0 | |
1446 17:06:26: --- 0.39 60% 12% 45% 1% 0% 1% 58.0°C 0/0 | |
1447 17:06:26: --- 0.39 27% 2% 11% 0% 13% 0% 57.0°C 0/0 | |
1448 17:06:27: --- 0.39 10% 7% 1% 1% 0% 0% 55.6°C 0/0 | |
1449 17:06:27: --- 0.44 15% 5% 7% 2% 0% 0% 55.6°C 0/0 | |
1450 17:06:27: --- 0.44 8% 8% 0% 0% 0% 0% 55.1°C 0/0 | |
1451 17:06:28: --- 0.44 22% 5% 15% 1% 0% 0% 55.1°C 0/0 | |
1452 | |
1453 ### resolv.conf | |
1454 | |
1455 lrwxrwxrwx 1 root root 32 Feb 19 00:44 /etc/resolv.conf -> /run/systemd/resolve/resolv.conf | |
1456 # This file is managed by man:systemd-resolved(8). Do not edit. | |
1457 # | |
1458 # This is a dynamic resolv.conf file for connecting local clients directly to | |
1459 # all known uplink DNS servers. This file lists all configured search domains. | |
1460 # | |
1461 # Third party programs must not access this file directly, but only through the | |
1462 # symlink at /etc/resolv.conf. To manage man:resolv.conf(5) in a different way, | |
1463 # replace this symlink by a static file or a different symlink. | |
1464 # | |
1465 # See man:systemd-resolved.service(8) for details about the supported modes of | |
1466 # operation for /etc/resolv.conf. | |
1467 | |
1468 nameserver XXX.XXX.0.1 | |
1469 nameserver fd9f:300d:aab8::1 | |
1470 | |
1471 ### Current sysinfo: | |
1472 | |
1473 | |
1474 | |
1475 procs -----------------------memory---------------------- ---swap-- -----io---- -system-- --------cpu-------- | |
1476 r b swpd free buff cache si so bi bo in cs us sy id wa st | |
1477 0 0 114424 327172 5984 767984 0 0 26 4 50 62 11 3 73 13 0 | |
1478 | |
1479 total used free shared buff/cache available | |
1480 Mem: 2.0Gi 939Mi 319Mi 42Mi 755Mi 974Mi | |
1481 Swap: 2.0Gi 111Mi 1.9Gi | |
1482 | |
1483 | |
1484 | |
1485 17:06:28 up 3 days, 15 min, 1 user, load average: 0.44, 0.26, 0.27 | |
1486 | |
1487 [ 1.647113] usb usb2: Product: xHCI Host Controller | |
1488 [ 1.647116] usb usb2: Manufacturer: Linux 5.10.34-mvebu xhci-hcd | |
1489 [ 1.647120] usb usb2: SerialNumber: f10f0000.usb3 | |
1490 [ 1.647333] hub 2-0:1.0: USB hub found | |
1491 [ 1.647350] hub 2-0:1.0: 1 port detected | |
1492 [ 1.647497] xhci-hcd f10f0000.usb3: xHCI Host Controller | |
1493 [ 1.647505] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3 | |
1494 [ 1.647518] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed | |
1495 [ 1.647549] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. | |
1496 [ 1.647603] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 | |
1497 [ 1.647608] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
1498 [ 1.647611] usb usb3: Product: xHCI Host Controller | |
1499 [ 1.647614] usb usb3: Manufacturer: Linux 5.10.34-mvebu xhci-hcd | |
1500 [ 1.647617] usb usb3: SerialNumber: f10f0000.usb3 | |
1501 [ 1.647808] hub 3-0:1.0: USB hub found | |
1502 [ 1.647822] hub 3-0:1.0: 1 port detected | |
1503 [ 1.648068] xhci-hcd f10f8000.usb3: xHCI Host Controller | |
1504 [ 1.648078] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4 | |
1505 [ 1.648268] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 | |
1506 [ 1.648291] xhci-hcd f10f8000.usb3: irq 55, io mem 0xf10f8000 | |
1507 [ 1.648429] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
1508 [ 1.648434] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
1509 [ 1.648437] usb usb4: Product: xHCI Host Controller | |
1510 [ 1.648441] usb usb4: Manufacturer: Linux 5.10.34-mvebu xhci-hcd | |
1511 [ 1.648444] usb usb4: SerialNumber: f10f8000.usb3 | |
1512 [ 1.648640] hub 4-0:1.0: USB hub found | |
1513 [ 1.648655] hub 4-0:1.0: 1 port detected | |
1514 [ 1.648788] xhci-hcd f10f8000.usb3: xHCI Host Controller | |
1515 [ 1.648795] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5 | |
1516 [ 1.648807] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed | |
1517 [ 1.648837] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. | |
1518 [ 1.648887] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 | |
1519 [ 1.648891] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
1520 [ 1.648894] usb usb5: Product: xHCI Host Controller | |
1521 [ 1.648898] usb usb5: Manufacturer: Linux 5.10.34-mvebu xhci-hcd | |
1522 [ 1.648901] usb usb5: SerialNumber: f10f8000.usb3 | |
1523 [ 1.649079] hub 5-0:1.0: USB hub found | |
1524 [ 1.649094] hub 5-0:1.0: 1 port detected | |
1525 [ 1.649357] usbcore: registered new interface driver usb-storage | |
1526 [ 1.649544] mousedev: PS/2 mouse device common for all mice | |
1527 [ 1.650162] armada38x-rtc f10a3800.rtc: registered as rtc0 | |
1528 [ 1.650239] armada38x-rtc f10a3800.rtc: setting system clock to 2021-06-17T23:50:40 UTC (1623973840) | |
1529 [ 1.650358] i2c /dev entries driver | |
1530 [ 1.650870] pca953x 0-0020: supply vcc not found, using dummy regulator | |
1531 [ 1.650938] pca953x 0-0020: using no AI | |
1532 [ 1.651614] gpio-496 (board-rev-0): hogged as input | |
1533 [ 1.651703] gpio-497 (board-rev-1): hogged as input | |
1534 [ 1.651790] gpio-501 (usb-overcurrent-status): hogged as input | |
1535 [ 1.654017] sdhci: Secure Digital Host Controller Interface driver | |
1536 [ 1.654022] sdhci: Copyright(c) Pierre Ossman | |
1537 [ 1.654147] sdhci-pltfm: SDHCI platform and OF driver helper | |
1538 [ 1.654242] sdhci-pxav3 f10d8000.sdhci: Got CD GPIO | |
1539 [ 1.654825] ledtrig-cpu: registered to indicate activity on CPUs | |
1540 [ 1.654852] hid: raw HID events driver (C) Jiri Kosina | |
1541 [ 1.654920] usbcore: registered new interface driver usbhid | |
1542 [ 1.654923] usbhid: USB HID core driver | |
1543 [ 1.655130] Initializing XFRM netlink socket | |
1544 [ 1.655356] NET: Registered protocol family 10 | |
1545 [ 1.676434] Segment Routing with IPv6 | |
1546 [ 1.676494] NET: Registered protocol family 17 | |
1547 [ 1.676659] ThumbEE CPU extension supported. | |
1548 [ 1.676667] Registering SWP/SWPB emulation handler | |
1549 [ 1.676794] registered taskstats version 1 | |
1550 [ 1.676800] Loading compiled-in X.509 certificates | |
1551 [ 1.680970] Loaded X.509 cert 'Build time autogenerated kernel key: 4bcc027928e39a8ca84c86fd18e21f81b5ff8b83' | |
1552 [ 1.682095] zswap: loaded using pool zstd/z3fold | |
1553 [ 1.682413] Key type ._fscrypt registered | |
1554 [ 1.682417] Key type .fscrypt registered | |
1555 [ 1.682421] Key type fscrypt-provisioning registered | |
1556 [ 1.684126] Btrfs loaded, crc32c=crc32c-generic | |
1557 [ 1.685986] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA | |
1558 [ 1.694983] Key type encrypted registered | |
1559 [ 1.694992] AppArmor: AppArmor sha1 policy hashing enabled | |
1560 [ 1.696501] USB-PWR: supplied by power_brick_12V | |
1561 [ 1.696868] input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
1562 [ 1.718657] mmc0: new high speed SDHC card at address 59b4 | |
1563 [ 1.718964] mmcblk0: mmc0:59b4 00000 3.67 GiB | |
1564 [ 1.719968] mmcblk0: p1 | |
1565 [ 1.877780] usb 5-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd | |
1566 [ 1.898326] usb 5-1: New USB device found, idVendor=0781, idProduct=5580, bcdDevice= 0.10 | |
1567 [ 1.898330] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
1568 [ 1.898334] usb 5-1: Product: Extreme | |
1569 [ 1.898337] usb 5-1: Manufacturer: SanDisk | |
1570 [ 1.898340] usb 5-1: SerialNumber: AA011008150457010124 | |
1571 [ 1.898842] usb-storage 5-1:1.0: USB Mass Storage device detected | |
1572 [ 1.899043] scsi host4: usb-storage 5-1:1.0 | |
1573 [ 2.089766] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
1574 [ 2.089770] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
1575 [ 2.089786] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
1576 [ 2.089789] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) | |
1577 [ 2.090232] ata3.00: ATA-9: WDC WD10JPVX-60JC3T0, 01.01A01, max UDMA/133 | |
1578 [ 2.090237] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32) | |
1579 [ 2.090279] ata1.00: ATA-9: WDC WD10JPVX-75JC3T0, 01.01A01, max UDMA/133 | |
1580 [ 2.090282] ata4.00: ATA-9: WDC WD10JPVX-75JC3T0, 02.01A02, max UDMA/133 | |
1581 [ 2.090286] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32) | |
1582 [ 2.090291] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32) | |
1583 [ 2.090709] ata3.00: configured for UDMA/133 | |
1584 [ 2.090812] ata1.00: configured for UDMA/133 | |
1585 [ 2.090815] ata4.00: configured for UDMA/133 | |
1586 [ 2.091017] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-75J 1A01 PQ: 0 ANSI: 5 | |
1587 [ 2.091307] sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
1588 [ 2.091372] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) | |
1589 [ 2.091377] sd 0:0:0:0: [sda] 4096-byte physical blocks | |
1590 [ 2.091399] sd 0:0:0:0: [sda] Write Protect is off | |
1591 [ 2.091404] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
1592 [ 2.091436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
1593 [ 2.406389] ata2.00: ATA-8: TOSHIBA MQ01ABD100M, AX101U, max UDMA/100 | |
1594 [ 2.406395] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32) | |
1595 [ 2.407713] ata2.00: configured for UDMA/100 | |
1596 [ 2.407886] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 1U PQ: 0 ANSI: 5 | |
1597 [ 2.408156] sd 1:0:0:0: Attached scsi generic sg1 type 0 | |
1598 [ 2.408214] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) | |
1599 [ 2.408220] sd 1:0:0:0: [sdb] 4096-byte physical blocks | |
1600 [ 2.408243] sd 1:0:0:0: [sdb] Write Protect is off | |
1601 [ 2.408248] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 | |
1602 [ 2.408280] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
1603 [ 2.408365] scsi 2:0:0:0: Direct-Access ATA WDC WD10JPVX-60J 1A01 PQ: 0 ANSI: 5 | |
1604 [ 2.408645] sd 2:0:0:0: Attached scsi generic sg2 type 0 | |
1605 [ 2.408710] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) | |
1606 [ 2.408715] sd 2:0:0:0: [sdc] 4096-byte physical blocks | |
1607 [ 2.408739] sd 2:0:0:0: [sdc] Write Protect is off | |
1608 [ 2.408744] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 | |
1609 [ 2.408778] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
1610 [ 2.408852] scsi 3:0:0:0: Direct-Access ATA WDC WD10JPVX-75J 1A02 PQ: 0 ANSI: 5 | |
1611 [ 2.409177] sd 3:0:0:0: Attached scsi generic sg3 type 0 | |
1612 [ 2.409283] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) | |
1613 [ 2.409288] sd 3:0:0:0: [sdd] 4096-byte physical blocks | |
1614 [ 2.409312] sd 3:0:0:0: [sdd] Write Protect is off | |
1615 [ 2.409317] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 | |
1616 [ 2.409349] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
1617 [ 2.497472] sd 1:0:0:0: [sdb] Attached SCSI removable disk | |
1618 [ 2.515027] sd 0:0:0:0: [sda] Attached SCSI removable disk | |
1619 [ 2.764252] sd 3:0:0:0: [sdd] Attached SCSI removable disk | |
1620 [ 2.770564] sd 2:0:0:0: [sdc] Attached SCSI removable disk | |
1621 [ 2.771075] Freeing unused kernel memory: 1024K | |
1622 [ 2.785902] Run /init as init process | |
1623 [ 2.785907] with arguments: | |
1624 [ 2.785909] /init | |
1625 [ 2.785912] scandelay | |
1626 [ 2.785914] with environment: | |
1627 [ 2.785917] HOME=/ | |
1628 [ 2.785919] TERM=linux | |
1629 [ 2.785921] ubootdev=mmc | |
1630 [ 2.786082] process '/usr/bin/sh' started with executable stack | |
1631 [ 2.910191] scsi 4:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6 | |
1632 [ 2.910481] sd 4:0:0:0: Attached scsi generic sg4 type 0 | |
1633 [ 2.910656] sd 4:0:0:0: [sde] 61282631 512-byte logical blocks: (31.4 GB/29.2 GiB) | |
1634 [ 2.910885] sd 4:0:0:0: [sde] Write Protect is off | |
1635 [ 2.910891] sd 4:0:0:0: [sde] Mode Sense: 53 00 00 08 | |
1636 [ 2.911082] sd 4:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA | |
1637 [ 2.938447] sde: sde1 | |
1638 [ 2.939442] sd 4:0:0:0: [sde] Attached SCSI removable disk | |
1639 [ 2.963038] random: fast init done | |
1640 [ 3.153494] usbcore: registered new interface driver uas | |
1641 [ 3.463736] async_tx: api initialized (async) | |
1642 [ 3.838698] random: crng init done | |
1643 [ 3.873852] BTRFS: device fsid bfa267c0-df2c-45a6-ad88-9d76b3844326 devid 4 transid 457792 /dev/sdd scanned by btrfs (225) | |
1644 [ 3.874024] BTRFS: device fsid bfa267c0-df2c-45a6-ad88-9d76b3844326 devid 3 transid 457792 /dev/sdc scanned by btrfs (225) | |
1645 [ 3.874193] BTRFS: device fsid bfa267c0-df2c-45a6-ad88-9d76b3844326 devid 2 transid 457792 /dev/sdb scanned by btrfs (225) | |
1646 [ 3.874344] BTRFS: device fsid bfa267c0-df2c-45a6-ad88-9d76b3844326 devid 1 transid 457792 /dev/sda scanned by btrfs (225) | |
1647 [ 5.310272] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) | |
1648 [ 6.148931] systemd[1]: Inserted module 'autofs4' | |
1649 [ 6.207725] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) | |
1650 [ 6.207960] systemd[1]sysctl: permission denied on key 'vm.mmap_rnd_bits' | |
sysctl: permission denied on key 'vm.stat_refresh' | |
: Detected architecture arm. | |
1651 [ 6.250548] systemd[1]: Set hostname to <TrapNAS>. | |
1652 [ 7.281275] systemd[1]: /lib/systemd/system/systemd-udevd.service:21: Unknown lvalue 'ProtectClock' in section 'Service', ignoring | |
1653 [ 7.281296] systemd[1]: /lib/systemd/system/systemd-udevd.service:22: Unknown lvalue 'ProtectHostname' in section 'Service', ignoring | |
1654 [ 7.281343] systemd[1]: /lib/systemd/system/systemd-udevd.service:26: Unknown lvalue 'RestrictSUIDSGID' in section 'Service', ignoring | |
1655 [ 7.289128] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly. | |
1656 [ 7.304537] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly. | |
1657 [ 7.357351] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly. | |
1658 [ 7.471506] systemd[1]: Listening on Syslog Socket. | |
1659 [ 7.637948] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro | |
1660 [ 8.007723] marvell-cesa f1090000.crypto: CESA device successfully registered | |
1661 [ 8.037156] lm75 0-004c: supply vs not found, using dummy regulator | |
1662 [ 8.037538] lm75 0-004c: hwmon2: sensor 'lm75' | |
1663 [ 8.938671] mvneta f1070000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] (irq=POLL) | |
1664 [ 8.938938] mvneta f1070000.ethernet eth0: configuring for phy/rgmii-id link mode | |
1665 [ 9.006052] orion_wdt: Initial timeout 171 sec | |
1666 [ 9.015566] at24 0-0053: supply vcc not found, using dummy regulator | |
1667 [ 9.021656] at24 0-0053: 256 byte 24c02 EEPROM, writable, 16 bytes/write | |
1668 [ 9.693925] Adding 2097148k swap on /dev/sde1. Priority:-2 extents:1 across:2097148k FS | |
1669 [ 10.231934] BTRFS info (device sda): disk space caching is enabled | |
1670 [ 10.231940] BTRFS info (device sda): has skinny extents | |
1671 [ 13.022320] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
1672 [ 13.022340] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
1673 [ 15.022374] systemd[1]: Mounted /srv/dev-disk-by-id-ata-TOSHIBA_MQ01ABD100M_57L9PD0TT. | |
1674 [ 15.214829] systemd[1]: Mounted /var/lib/docker. | |
1675 [ 15.230286] systemd[1]: Mounted /home. | |
1676 [ 15.246239] systemd[1]: Reached target Local File Systems. | |
1677 [ 15.264518] systemd[1]: Starting Armbian ZRAM config... | |
1678 [ 15.282838] systemd[1]: Starting Cleanup monit state file... | |
1679 [ 15.297874] systemd[1]: Condition check resulted in Set console font and keymap being skipped. | |
1680 [ 15.300577] systemd[1]: Starting Preprocess NFS configuration... | |
1681 [ 15.313969] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. | |
1682 [ 15.316697] systemd[1]: Starting folder2ram systemd service... | |
1683 [ 15.924531] systemd-journald[774]: Received request to flush runtime journal from PID 1 | |
1684 [ 20.962298] NFSD: Using UMH upcall client tracking operations. | |
1685 [ 20.962307] NFSD: starting 90-second grace period (net f0000079) | |
1686 [ 22.333676] aufs 5.10-20210412 | |
1687 [ 49.747902] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. | |
1688 [ 49.765565] Bridge firewalling registered | |
1689 [ 68.384047] docker0: port 1(vethcc77883) entered blocking state | |
1690 [ 68.384055] docker0: port 1(vethcc77883) entered disabled state | |
1691 [ 68.384236] device vethcc77883 entered promiscuous mode | |
1692 [ 70.242794] docker0: port 2(veth6ea9d6c) entered blocking state | |
1693 [ 70.242801] docker0: port 2(veth6ea9d6c) entered disabled state | |
1694 [ 70.242948] device veth6ea9d6c entered promiscuous mode | |
1695 [ 70.891960] kmem.limit_in_bytes is deprecated and will be removed. Please report your usecase to linux-mm@kvack.org if you depend on this functionality. | |
1696 [ 70.915645] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation | |
1697 [ 71.361821] docker0: port 3(veth2d60b0e) entered blocking state | |
1698 [ 71.361829] docker0: port 3(veth2d60b0e) entered disabled state | |
1699 [ 71.361981] device veth2d60b0e entered promiscuous mode | |
1700 [ 72.574749] eth0: renamed from vetheef02b9 | |
1701 [ 72.594660] IPv6: ADDRCONF(NETDEV_CHANGE): vethcc77883: link becomes ready | |
1702 [ 72.594748] docker0: port 1(vethcc77883) entered blocking state | |
1703 [ 72.594754] docker0: port 1(vethcc77883) entered forwarding state | |
1704 [ 72.594847] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready | |
1705 [ 73.739062] docker0: port 4(veth04cb2ce) entered blocking state | |
1706 [ 73.739070] docker0: port 4(veth04cb2ce) entered disabled state | |
1707 [ 73.739250] device veth04cb2ce entered promiscuous mode | |
1708 [ 75.795034] eth0: renamed from veth60744e4 | |
1709 [ 75.810279] IPv6: ADDRCONF(NETDEV_CHANGE): veth6ea9d6c: link becomes ready | |
1710 [ 75.810364] docker0: port 2(veth6ea9d6c) entered blocking state | |
1711 [ 75.810370] docker0: port 2(veth6ea9d6c) entered forwarding state | |
1712 [ 77.258349] docker0: port 5(veth78e6dd5) entered blocking state | |
1713 [ 77.258357] docker0: port 5(veth78e6dd5) entered disabled state | |
1714 [ 77.258501] device veth78e6dd5 entered promiscuous mode | |
1715 [ 80.559852] docker0: port 6(veth75a58b8) entered blocking state | |
1716 [ 80.559862] docker0: port 6(veth75a58b8) entered disabled state | |
1717 [ 80.560031] device veth75a58b8 entered promiscuous mode | |
1718 [ 81.587760] eth0: renamed from vethf6f8afd | |
1719 [ 81.602965] IPv6: ADDRCONF(NETDEV_CHANGE): veth2d60b0e: link becomes ready | |
1720 [ 81.603065] docker0: port 3(veth2d60b0e) entered blocking state | |
1721 [ 81.603071] docker0: port 3(veth2d60b0e) entered forwarding state | |
1722 [ 82.375084] eth0: renamed from veth3eeea7a | |
1723 [ 82.393760] IPv6: ADDRCONF(NETDEV_CHANGE): veth04cb2ce: link becomes ready | |
1724 [ 82.393848] docker0: port 4(veth04cb2ce) entered blocking state | |
1725 [ 82.393854] docker0: port 4(veth04cb2ce) entered forwarding state | |
1726 [ 91.183001] eth0: renamed from vethfd9cbbe | |
1727 [ 91.205168] IPv6: ADDRCONF(NETDEV_CHANGE): veth78e6dd5: link becomes ready | |
1728 [ 91.205252] docker0: port 5(veth78e6dd5) entered blocking state | |
1729 [ 91.205259] docker0: port 5(veth78e6dd5) entered forwarding state | |
1730 [ 94.597470] eth0: renamed from vethedcbdcf | |
1731 [ 94.613176] IPv6: ADDRCONF(NETDEV_CHANGE): veth75a58b8: link becomes ready | |
1732 [ 94.613259] docker0: port 6(veth75a58b8) entered blocking state | |
1733 [ 94.613264] docker0: port 6(veth75a58b8) entered forwarding state | |
1734 [ 116.119057] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
1735 [ 116.119066] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0 | |
1736 [ 5378.038562] hrtimer: interrupt took 18000 ns | |
1737 | |
1738 | |
1739 vm.admin_reserve_kbytes = 8192 | |
1740 vm.block_dump = 0 | |
1741 vm.compact_unevictable_allowed = 1 | |
1742 vm.compaction_proactiveness = 20 | |
1743 vm.dirty_background_bytes = 0 | |
1744 vm.dirty_background_ratio = 1 | |
1745 vm.dirty_bytes = 0 | |
1746 vm.dirty_expire_centisecs = 12000 | |
1747 vm.dirty_ratio = 20 | |
1748 vm.dirty_writeback_centisecs = 12000 | |
1749 vm.dirtytime_expire_seconds = 43200 | |
1750 vm.extfrag_threshold = 500 | |
1751 vm.highmem_is_dirtyable = 0 | |
1752 vm.laptop_mode = 5 | |
1753 vm.legacy_va_layout = 0 | |
1754 vm.lowmem_reserve_ratio = 32 0 0 | |
1755 vm.max_map_count = 65530 | |
1756 vm.min_free_kbytes = 3441 | |
1757 vm.mmap_min_addr = 4096 | |
1758 vm.oom_dump_tasks = 1 | |
1759 vm.oom_kill_allocating_task = 0 | |
1760 vm.overcommit_kbytes = 0 | |
1761 vm.overcommit_memory = 0 | |
1762 vm.overcommit_ratio = 50 | |
1763 vm.page-cluster = 3 | |
1764 vm.page_lock_unfairness = 5 | |
1765 vm.panic_on_oom = 0 | |
1766 vm.percpu_pagelist_fraction = 0 | |
1767 vm.stat_interval = 1 | |
1768 vm.swappiness = 100 | |
1769 vm.user_reserve_kbytes = 63937 | |
1770 vm.vfs_cache_pressure = 50 | |
1771 vm.watermark_boost_factor = 15000 | |
1772 vm.watermark_scale_factor = 10 | |
1773 | |
1774 ### interrupts: | |
1775 CPU0 CPU1 | |
1776 25: 0 0 GIC-0 27 Edge gt | |
1777 26: 75411333 70759034 GIC-0 29 Edge twd | |
1778 27: 0 0 MPIC 5 Level armada_370_xp_per_cpu_tick | |
1779 28: 0 0 MPIC 3 Level arm-pmu | |
1780 29: 143 0 GIC-0 34 Level mv64xxx_i2c | |
1781 30: 0 0 GIC-0 35 Level mv64xxx_i2c | |
1782 31: 1083 0 GIC-0 44 Level ttyS0 | |
1783 41: 0 0 GIC-0 41 Level f1020300.watchdog | |
1784 45: 0 0 GIC-0 96 Level f1020300.watchdog | |
1785 46: 30106354 12708812 MPIC 8 Level eth0 | |
1786 47: 0 0 GIC-0 50 Level ehci_hcd:usb1 | |
1787 48: 0 0 GIC-0 51 Level f1090000.crypto | |
1788 49: 0 0 GIC-0 52 Level f1090000.crypto | |
1789 50: 1 0 GIC-0 53 Level f10a3800.rtc | |
1790 51: 11428289 0 GIC-0 58 Level ahci-mvebu[f10a8000.sata] | |
1791 52: 11169696 0 GIC-0 60 Level ahci-mvebu[f10e0000.sata] | |
1792 53: 287435 0 GIC-0 57 Level mmc0 | |
1793 54: 0 0 GIC-0 48 Level xhci-hcd:usb2 | |
1794 55: 263848 0 GIC-0 49 Level xhci-hcd:usb4 | |
1795 56: 2 0 GIC-0 54 Level f1060800.xor | |
1796 57: 2 0 GIC-0 97 Level f1060900.xor | |
1797 58: 0 0 f1018100.gpio 23 Edge 0-0020 | |
1798 59: 0 0 f1018100.gpio 20 Edge f10d8000.sdhci cd | |
1799 60: 3 0 f1018100.gpio 18 Edge Wake-On-LAN | |
1800 IPI0: 0 1 CPU wakeup interrupts | |
1801 IPI1: 0 0 Timer broadcast interrupts | |
1802 IPI2: 8779821 17924218 Rescheduling interrupts | |
1803 IPI3: 338978 1587247 Function call interrupts | |
1804 IPI4: 0 0 CPU stop interrupts | |
1805 IPI5: 0 0 IRQ work interrupts | |
1806 IPI6: 0 0 completion interrupts | |
1807 Err: 0 | |
Please upload the whole output above to an online pasteboard service | |
and provide the URL in the forum where you have been asked for this. | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment