Created
December 15, 2016 20:23
-
-
Save neheb/e2c8df5708c2ab5364eec5628f1a2476 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 62.640812] usb 4-1: USB disconnect, device number 10 | |
[ 62.650748] blk_update_request: I/O error, dev sda, sector 0 | |
[ 62.656450] sd 9:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 | |
[ 62.656459] sd 9:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 01 2c b0 00 00 08 00 | |
[ 62.656464] blk_update_request: I/O error, dev sda, sector 76976 | |
[ 62.662838] sd 9:0:0:0: [sda] Synchronizing SCSI cache | |
[ 62.662865] EXT4-fs error (device sda1): ext4_find_entry:1450: inode #2: comm sshd: reading directory lblock 0 | |
[ 62.673137] sd 9:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00 | |
[ 64.310724] usb 4-1: new high-speed USB device number 11 using xhci-hcd | |
[ 64.453307] usb-storage 4-1:1.0: USB Mass Storage device detected | |
[ 64.453429] scsi host10: usb-storage 4-1:1.0 | |
[ 65.451743] scsi 10:0:0:0: Direct-Access WDC WD10 JPVX-22JC3T0 01.0 PQ: 0 ANSI: 6 | |
[ 65.452426] sd 10:0:0:0: [sda] 1953525164 512-byte logical blocks: (1.00 TB/932 GiB) | |
[ 65.452808] sd 10:0:0:0: [sda] Write Protect is off | |
[ 65.452815] sd 10:0:0:0: [sda] Mode Sense: 31 00 00 00 | |
[ 65.453177] sd 10:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
[ 65.610786] usb 4-1: USB disconnect, device number 11 | |
[ 65.630742] sd 10:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 | |
[ 65.630752] sd 10:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 04 00 | |
[ 65.630757] blk_update_request: I/O error, dev sda, sector 0 | |
[ 65.636430] Buffer I/O error on dev sda, logical block 0, async page read | |
[ 65.643271] sd 10:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 | |
[ 65.643278] sd 10:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 04 00 00 04 00 | |
[ 65.643282] blk_update_request: I/O error, dev sda, sector 4 | |
[ 65.648953] Buffer I/O error on dev sda, logical block 1, async page read | |
[ 65.655819] sda: unable to read partition table | |
[ 65.656099] sd 10:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00 | |
[ 65.656106] sd 10:0:0:0: [sda] Sense not available. | |
[ 65.656140] sd 10:0:0:0: [sda] Attached SCSI disk | |
[ 66.190726] usb 4-1: new high-speed USB device number 12 using xhci-hcd | |
[ 66.335678] usb-storage 4-1:1.0: USB Mass Storage device detected | |
[ 66.335845] scsi host11: usb-storage 4-1:1.0 | |
[ 67.331737] scsi 11:0:0:0: Direct-Access WDC WD10 JPVX-22JC3T0 01.0 PQ: 0 ANSI: 6 | |
[ 67.332331] sd 11:0:0:0: [sda] 1953525164 512-byte logical blocks: (1.00 TB/932 GiB) | |
[ 67.332727] sd 11:0:0:0: [sda] Write Protect is off | |
[ 67.332734] sd 11:0:0:0: [sda] Mode Sense: 31 00 00 00 | |
[ 67.333109] sd 11:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
[ 67.490794] usb 4-1: USB disconnect, device number 12 | |
[ 67.510741] sd 11:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 | |
[ 67.510750] sd 11:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 04 00 | |
[ 67.510756] blk_update_request: I/O error, dev sda, sector 0 | |
[ 67.516430] Buffer I/O error on dev sda, logical block 0, async page read | |
[ 67.523270] sd 11:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 | |
[ 67.523277] sd 11:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 04 00 00 04 00 | |
[ 67.523281] blk_update_request: I/O error, dev sda, sector 4 | |
[ 67.528952] Buffer I/O error on dev sda, logical block 1, async page read | |
[ 67.535856] sda: unable to read partition table | |
[ 67.536181] sd 11:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00 | |
[ 67.536189] sd 11:0:0:0: [sda] Sense not available. | |
[ 67.536230] sd 11:0:0:0: [sda] Attached SCSI disk | |
[ 68.080723] usb 4-1: new high-speed USB device number 13 using xhci-hcd | |
[ 68.225764] usb-storage 4-1:1.0: USB Mass Storage device detected | |
[ 68.229826] scsi host12: usb-storage 4-1:1.0 | |
[ 69.221736] scsi 12:0:0:0: Direct-Access WDC WD10 JPVX-22JC3T0 01.0 PQ: 0 ANSI: 6 | |
[ 69.222615] sd 12:0:0:0: [sda] 1953525164 512-byte logical blocks: (1.00 TB/932 GiB) | |
[ 69.222990] sd 12:0:0:0: [sda] Write Protect is off | |
[ 69.222997] sd 12:0:0:0: [sda] Mode Sense: 31 00 00 00 | |
[ 69.223361] sd 12:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
[ 69.295364] Alternate GPT is invalid, using primary GPT. | |
[ 69.295388] sda: sda1 | |
[ 69.297252] sd 12:0:0:0: [sda] Attached SCSI disk | |
[ 69.425988] EXT4-fs (sda1): recovery complete | |
[ 69.426003] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: | |
[ 70.420784] usb 4-1: USB disconnect, device number 13 | |
[ 70.430749] blk_update_request: I/O error, dev sda, sector 0 | |
[ 70.436456] sd 12:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 | |
[ 70.436469] sd 12:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 01 2c b0 00 00 08 00 | |
[ 70.436473] blk_update_request: I/O error, dev sda, sector 76976 | |
[ 70.442523] EXT4-fs error (device sda1): ext4_find_entry:1450: inode #2: comm ash: reading directory lblock 0 | |
[ 70.442815] sd 12:0:0:0: [sda] Synchronizing SCSI cache | |
[ 70.443181] sd 12:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00 | |
[ 70.452528] Buffer I/O error on dev sda1, logical block 0, lost sync page write | |
[ 71.010727] usb 4-1: new high-speed USB device number 14 using xhci-hcd | |
[ 71.155296] usb-storage 4-1:1.0: USB Mass Storage device detected | |
[ 71.158491] scsi host13: usb-storage 4-1:1.0 | |
[ 72.151738] scsi 13:0:0:0: Direct-Access WDC WD10 JPVX-22JC3T0 01.0 PQ: 0 ANSI: 6 | |
[ 72.152633] sd 13:0:0:0: [sda] 1953525164 512-byte logical blocks: (1.00 TB/932 GiB) | |
[ 72.153013] sd 13:0:0:0: [sda] Write Protect is off | |
[ 72.153020] sd 13:0:0:0: [sda] Mode Sense: 31 00 00 00 | |
[ 72.153378] sd 13:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
[ 72.250790] usb 4-1: USB disconnect, device number 14 | |
[ 72.270745] sd 13:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 | |
[ 72.270756] sd 13:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 04 00 | |
[ 72.270761] blk_update_request: I/O error, dev sda, sector 0 | |
[ 72.276434] Buffer I/O error on dev sda, logical block 0, async page read | |
[ 72.283279] sd 13:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 | |
[ 72.283286] sd 13:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 04 00 00 04 00 | |
[ 72.283290] blk_update_request: I/O error, dev sda, sector 4 | |
[ 72.288962] Buffer I/O error on dev sda, logical block 1, async page read | |
[ 72.295853] sda: unable to read partition table | |
[ 72.296168] sd 13:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00 | |
[ 72.296175] sd 13:0:0:0: [sda] Sense not available. | |
[ 72.296214] sd 13:0:0:0: [sda] Attached SCSI disk | |
[ 72.890724] usb 4-1: new high-speed USB device number 15 using xhci-hcd | |
[ 73.035665] usb-storage 4-1:1.0: USB Mass Storage device detected | |
[ 73.035870] scsi host14: usb-storage 4-1:1.0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment