gbrow004

Update!

This gist is out of date and I can no longer help much, as I got rid of my Mac.

Please visit T2 Linux website for more and better information:

https://t2linux.org/

Acknowledgements

This gist is just a compilation of the hard work that others have put in. I'm not a software developer, so if there are any mistakes or better ways of doing things, I'd appreciate any suggestions. Here's a list of the real heroes who made this possible:

alllexx88

diff --git a/Makefile b/Makefile
index 8281112..5ed3acc 100644
--- a/Makefile
+++ b/Makefile
@@ -40,7 +40,7 @@ evdi-y := evdi_drv.o evdi_modeset.o evdi_connector.o evdi_encoder.o evdi_main.o
 evdi-$(CONFIG_COMPAT) += evdi_ioc32.o
 obj-$(CONFIG_DRM_EVDI) := evdi.o
 
-else
+endif

TRPB

Hardware Prerequisites

You'll need at least the following hardware:

• At least 3 USB-A to USB-C converters or hub with enough ports for at least 3 USB devices if all your devices are USB-A then:
• A USB drive
• A USB keyboard
• USB to Ethernet adapter, compatible USB dongle or USB tethering on a phone

roadrunner2

Introduction

This is about documenting getting Linux running on the late 2016 and mid 2017 MPB's; the focus is mostly on the MacBookPro13,3 and MacBookPro14,3 (15inch models), but I try to make it relevant and provide information for MacBookPro13,1, MacBookPro13,2, MacBookPro14,1, and MacBookPro14,2 (13inch models) too. I'm currently using Fedora 27, but most the things should be valid for other recent distros even if the details differ. The kernel version is 4.14.x (after latest update).

The state of linux on the MBP (with particular focus on MacBookPro13,2) is also being tracked on https://github.com/Dunedan/mbp-2016-linux . And for Ubuntu users there are a couple tutorials (here and here) focused on that distro and the MacBook.

Note: For those who have followed these instructions ealier, and in particular for those who have had problems with the custom DSDT, modifying the DSDT is not necessary anymore - se